// void setAnchors( dxJoint j, double x, double y, double z,
// dVector3 anchor1, dVector3 anchor2 )
final void setAnchors(DVector3C xyz, DVector3 anchor1, DVector3 anchor2) {
if (node[0].body != null) {
/// double[] q = new double[4];
DVector3 q = new DVector3();
// q.v[0] = x - node[0].body._posr.pos.v[0];
// q.v[1] = y - node[0].body._posr.pos.v[1];
// q.v[2] = z - node[0].body._posr.pos.v[2];
// q.v[3] = 0;
q.eqDiff(xyz, node[0].body.posr().pos());
dMultiply1_331(anchor1, node[0].body.posr().R(), q);
if (node[1].body != null) {
// q.v[0] = x - node[1].body._posr.pos.v[0];
// q.v[1] = y - node[1].body._posr.pos.v[1];
// q.v[2] = z - node[1].body._posr.pos.v[2];
// q.v[3] = 0;
q.eqDiff(xyz, node[1].body.posr().pos());
dMultiply1_331(anchor2, node[1].body.posr().R(), q);
} else {
// anchor2.v[0] = x;
// anchor2.v[1] = y;
// anchor2.v[2] = z;
anchor2.set(xyz);
}
}
// anchor1.v[3] = 0;
// anchor2.v[3] = 0;
}
void getAxis2(DVector3 result, DVector3C axis2) {
if (node[1].body != null) {
dMultiply0_331(result, node[1].body.posr().R(), axis2);
} else {
// result.v[0] = axis2.v[0];
// result.v[1] = axis2.v[1];
// result.v[2] = axis2.v[2];
result.set(axis2);
}
}
// void getAnchor2( dxJoint j, dVector3 result, dVector3 anchor2 )
void getAnchor2(DVector3 result, DVector3 anchor2) {
if (node[1].body != null) {
dMultiply0_331(result, node[1].body.posr().R(), anchor2);
// result.v[0] += node[1].body.posr.pos.v[0];
// result.v[1] += node[1].body.posr.pos.v[1];
// result.v[2] += node[1].body.posr.pos.v[2];
result.add(node[1].body.posr().pos());
} else {
// result.v[0] = anchor2.v[0];
// result.v[1] = anchor2.v[1];
// result.v[2] = anchor2.v[2];
result.set(anchor2);
}
}
void setAxes(DVector3C axis, DVector3 axis1, DVector3 axis2) {
if (node[0].body != null) {
DVector3 q = new DVector3(axis);
dNormalize3(q);
if (axis1 != null) {
dMultiply1_331(axis1, node[0].body.posr().R(), q);
}
if (axis2 != null) {
if (node[1].body != null) {
dMultiply1_331(axis2, node[1].body.posr().R(), q);
} else {
axis2.set(axis);
}
}
}
}
// void setAxes( dxJoint j, double x, double y, double z,
void setAxes(double x, double y, double z, DVector3 axis1, DVector3 axis2) {
if (node[0].body != null) {
// double[] q = new double[4];
DVector3 q = new DVector3(x, y, z);
dNormalize3(q);
if (axis1 != null) {
dMultiply1_331(axis1, node[0].body.posr().R(), q);
// axis1.v[3] = 0;
}
if (axis2 != null) {
if (node[1].body != null) {
dMultiply1_331(axis2, node[1].body.posr().R(), q);
} else {
// axis2.v[0] = x;
// axis2.v[1] = y;
// axis2.v[2] = z;
axis2.set(x, y, z);
}
// axis2.v[3] = 0;
}
}
}
// int dCollideBoxPlane (dxGeom *o1, dxGeom *o2,
// int flags, dContactGeom *contact, int skip)
int dCollideBoxPlane(DxBox o1, DxPlane o2, int flags, DContactGeomBuffer contacts, int skip) {
// dIASSERT (skip >= (int)sizeof(dContactGeom));
dIASSERT(skip == 1);
// dIASSERT (o1.type == dBoxClass);
// dIASSERT (o2.type == dPlaneClass);
dIASSERT((flags & DxGeom.NUMC_MASK) >= 1);
DxBox box = o1;
DxPlane plane = o2;
DContactGeom contact = contacts.get(0);
contact.g1 = o1;
contact.g2 = o2;
contact.side1 = -1;
contact.side2 = -1;
// int ret = 0;
RefInt ret = new RefInt();
// @@@ problem: using 4-vector (plane.p) as 3-vector (normal).
// final double *R = o1.final_posr.R; // rotation of box
// final double *n = plane.p; // normal vector
final DMatrix3C R = o1.final_posr().R(); // rotation of box
// final double []n = plane._p; // normal vector
DVector3C n = plane.getNormal();
// project sides lengths along normal vector, get absolute values
double Q1 = dCalcVectorDot3_14(n, R, 0);
double Q2 = dCalcVectorDot3_14(n, R, 1);
double Q3 = dCalcVectorDot3_14(n, R, 2);
// double A1 = box.side.v[0] * Q1;
// double A2 = box.side.v[1] * Q2;
// double A3 = box.side.v[2] * Q3;
double[] A = {box.side.get0() * Q1, box.side.get1() * Q2, box.side.get2() * Q3};
// double B1 = dFabs(A1);
// double B2 = dFabs(A2);
// double B3 = dFabs(A3);
double[] B = {dFabs(A[0]), dFabs(A[1]), dFabs(A[2])};
// early exit test
// double depth = plane._p[3] + (0.5)*(B1+B2+B3) - dDOT(n,o1._final_posr.pos);
RefDouble depth =
new RefDouble(
plane.getDepth() + (0.5) * (B[0] + B[1] + B[2]) - n.dot(o1.final_posr().pos()));
if (depth.get() < 0) return 0;
// find number of contacts requested
int maxc = flags & DxGeom.NUMC_MASK;
// if (maxc < 1) maxc = 1; // an assertion is made on entry
if (maxc > 4) maxc = 4; // not more than 4 contacts per box allowed
// find deepest point
DVector3 p = new DVector3();
// p.v[0] = o1._final_posr.pos.v[0];
// p.v[1] = o1._final_posr.pos.v[1];
// p.v[2] = o1._final_posr.pos.v[2];
p.set(o1.final_posr().pos());
// #define FOO1(i,op) \
// p.v[0] op (0.5)*box.side[i] * R[0+i]; \
// p.v[1] op (0.5)*box.side[i] * R[4+i]; \
// p.v[2] op (0.5)*box.side[i] * R[8+i];
// #define BAR1(i,iinc) if (A ## iinc > 0) { FOO1(i,-=) } else { FOO1(i,+=) }
// BAR1(0,1);
// BAR1(1,2);
// BAR1(2,3);
// #undef FOO
// #undef BAR
// substitute for FOO and BAR above (TZ)
for (int i = 0; i < 3; i++) {
if (A[i] > 0) p.eqSum(p, R.columnAsNewVector(i), -0.5 * box.side.get(i));
else p.eqSum(p, R.columnAsNewVector(i), +0.5 * box.side.get(i));
}
// the deepest point is the first contact point
// contact.pos[0] = p[0];
// contact.pos[1] = p[1];
// contact.pos[2] = p[2];
contact.pos.set(p);
contact.depth = depth.get();
ret.set(1); // ret = 1; // ret is number of contact points found so far
// TZ
do {
if (maxc == 1) {
// goto done;
done(ret, contacts, skip, o1, o2, maxc, depth.get(), p, n);
return ret.get();
}
// get the second and third contact points by starting from `p' and going
// along the two sides with the smallest projected length.
// #define FOO2(i,j,op) \
// CONTACT(contact,i*skip).pos[0] = p[0] op box.side[j] * R[0+j]; \
// CONTACT(contact,i*skip).pos[1] = p[1] op box.side[j] * R[4+j]; \
// CONTACT(contact,i*skip).pos[2] = p[2] op box.side[j] * R[8+j];
// contacts.get(i*skip).pos.sum(p, R.columnAsNewVector(j), op*box.side(j));
// #define BAR2(ctact,side,sideinc) \
// depth -= B ## sideinc; \
// if (depth < 0) goto done; \
// if (A ## sideinc > 0) { FOO(ctact,side,+); } else { FOO2(ctact,side,-); } \
// CONTACT(contact,ctact*skip).depth = depth; \
// ret++;
int p1, p2, p3, go;
// if (B[0] < B[1]) {
// if (B[2] < B[0]) goto use_side_3;
// else {
// BAR2(1,0,1); // use side 1
// if (maxc == 2) { //goto done;
// done(ret, contacts, skip, o1, o2);
// return ret;
// }
// if (B[1] < B[2]) goto contact2_2; else goto contact2_3;
// }
// } else {
// if (B[2] < B[1]) {
// use_side_3: // use side 3
// BAR2(1,2,3);
// if (maxc == 2) { //goto done;
// done(ret, contacts, skip, o1, o2);
// return ret;
// }
// if (B[0] < B[1]) goto contact2_1; else goto contact2_2;
// } else {
// BAR2(1,1,2); // use side 2
// if (maxc == 2) { //goto done;
// done(ret, contacts, skip, o1, o2);
// return ret;
// }
// if (B[0] < B[2]) goto contact2_1; else goto contact2_3;
// }
// }
if (B[0] < B[1]) {
if (B[2] < B[0]) {
// TODO
p1 = 1;
p2 = 2;
p3 = 3; // 1 2 3
if (B[0] < B[1]) go = 21;
else go = 22;
} else {
p1 = 1;
p2 = 0;
p3 = 1; // 1 0 1
if (B[1] < B[2]) go = 22;
else go = 23;
}
} else {
if (B[2] < B[1]) {
p1 = 1;
p2 = 2;
p3 = 3; // 1 2 3
if (B[0] < B[1]) go = 21;
else go = 22;
} else {
p1 = 1;
p2 = 1;
p3 = 2; // 1 1 2
if (B[0] < B[2]) go = 21;
else go = 23;
}
}
BAR2(p1, p2, p3, depth, ret, contacts, skip, A, B, o1, o2, p, R, box.side, maxc, n);
// TODO improve (e.g. make depth a primitive int, reduce arguments, ...
// BAR2_(p1, p2, depth, ret, contacts, skip, A[p2], B[p2], o1, o2, p, R, box.side);
if (maxc == 2) { // goto done;
break;
} else {
if (go == 21) {
if (!BAR2(2, 0, 1, depth, ret, contacts, skip, A, B, o1, o2, p, R, box.side, maxc, n))
return ret.get();
break;
} else if (go == 22) {
if (!BAR2(2, 1, 2, depth, ret, contacts, skip, A, B, o1, o2, p, R, box.side, maxc, n))
return ret.get();
break;
} else if (go == 23) {
if (!BAR2(2, 2, 3, depth, ret, contacts, skip, A, B, o1, o2, p, R, box.side, maxc, n))
return ret.get();
break;
} else {
throw new IllegalStateException("go=" + go);
}
}
// TZ
// throw new IllegalStateException();
// contact2_1: BAR2(2,0,1); goto done;
// contact2_2: BAR2(2,1,2); goto done;
// contact2_3: BAR2(2,2,3); goto done;
// #undef FOO
// #undef BAR
} while (false);
// done:
// for (int i=0; i<ret; i++) {
// CONTACT(contact,i*skip).g1 = o1;
// CONTACT(contact,i*skip).g2 = o2;
// }
done(ret, contacts, skip, o1, o2, maxc, depth.get(), p, n);
return ret.get();
}
// void dJointGetLMotorAxis( dJoint j, int anum, dVector3 result )
void dJointGetLMotorAxis(int anum, DVector3 result) {
dAASSERT(anum >= 0 && anum < 3);
if (anum < 0) anum = 0;
if (anum > 2) anum = 2;
result.set(axis[anum]);
}
