/** * Corresponds to ticket #1811. Check that after a creation of a diagram with ports (on node) from * the model content view , the layoutConstraint of all ports is not {0, 0}. */ public void testPortLocationForCreationFromModelContentView() { // Get the desired package final Model model = (Model) semanticModel; assertNotNull("Corrupted input data", model); // Get the diagram for the root of this model. diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model); // Get the class named "Class2" PackageableElement element = model.getPackagedElement("Class2"); assertTrue("Corrupted input data", element instanceof Class); final Class class2 = (Class) element; // Get the class named "Class3" element = model.getPackagedElement("Class3"); assertTrue("Corrupted input data", element instanceof Class); final Class class3 = (Class) element; final Property firstProperty = class3.getOwnedAttribute("Prop3to2", class2); final Property secondProperty = class3.getOwnedAttribute("OtherProp3to2", class2); // Open the editor (and refresh it) final IEditorPart editorPart = DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor()); TestsUtil.synchronizationWithUIThread(); final DDiagramElement firstPropertyDiagramElement = getFirstDiagramElement(diagram, firstProperty); assertNotNull( "The first property has no corresponding diagramElement", firstPropertyDiagramElement); final Node firstPropertyNode = getGmfNode(firstPropertyDiagramElement); assertNotNull("The first property has no corresponding GMF node", firstPropertyNode); assertTrue( "Bag layout constraint type", firstPropertyNode.getLayoutConstraint() instanceof Location); final Location firstLocation = (Location) firstPropertyNode.getLayoutConstraint(); final DDiagramElement secondPropertyDiagramElement = getFirstDiagramElement(diagram, secondProperty); assertNotNull( "The second property has no corresponding diagramElement", secondPropertyDiagramElement); final Node secondPropertyNode = getGmfNode(secondPropertyDiagramElement); assertNotNull("The second property has no corresponding GMF node", secondPropertyNode); assertTrue( "Bag layout constraint type", secondPropertyNode.getLayoutConstraint() instanceof Location); final Location secondLocation = (Location) secondPropertyNode.getLayoutConstraint(); assertFalse( "All the layout constraints of the ports should not be in {0,0}", firstLocation.getX() == 0 && firstLocation.getY() == 0 && secondLocation.getX() == 0 && secondLocation.getY() == 0); assertTrue( "All the layout constraints of the ports should be different", firstLocation.getX() != secondLocation.getX() || firstLocation.getY() != secondLocation.getY()); DialectUIManager.INSTANCE.closeEditor(editorPart, false); TestsUtil.synchronizationWithUIThread(); }
/* * (non-Javadoc) * * @see org.eclipse.papyrus.layout.LayouttoolInterface#getBounds(org.eclipse.gef.EditPart) */ public Rectangle getBounds(EditPart element) { if (element.getModel() instanceof Node) { Node node = (Node) element.getModel(); if (node.getLayoutConstraint() instanceof Bounds) { Bounds bounds = (Bounds) node.getLayoutConstraint(); return new Rectangle(bounds.getX(), bounds.getY(), bounds.getWidth(), bounds.getHeight()); } } return null; }
/** @generated */ public Edge createAssociation_4001( EObject domainElement, View containerView, int index, boolean persisted, PreferencesHint preferencesHint) { Connector edge = NotationFactory.eINSTANCE.createConnector(); edge.getStyles().add(NotationFactory.eINSTANCE.createFontStyle()); RelativeBendpoints bendpoints = NotationFactory.eINSTANCE.createRelativeBendpoints(); ArrayList<RelativeBendpoint> points = new ArrayList<RelativeBendpoint>(2); points.add(new RelativeBendpoint()); points.add(new RelativeBendpoint()); bendpoints.setPoints(points); edge.setBendpoints(bendpoints); ViewUtil.insertChildView(containerView, edge, index, persisted); edge.setType( edu.toronto.cs.se.modelepedia.necsis14_classdiagram.diagram.part .NECSIS14_ClassDiagramVisualIDRegistry.getType( edu.toronto.cs.se.modelepedia.necsis14_classdiagram.diagram.edit.parts .AssociationEditPart.VISUAL_ID)); edge.setElement(domainElement); // initializePreferences final IPreferenceStore prefStore = (IPreferenceStore) preferencesHint.getPreferenceStore(); org.eclipse.swt.graphics.RGB lineRGB = PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_LINE_COLOR); ViewUtil.setStructuralFeatureValue( edge, NotationPackage.eINSTANCE.getLineStyle_LineColor(), FigureUtilities.RGBToInteger(lineRGB)); FontStyle edgeFontStyle = (FontStyle) edge.getStyle(NotationPackage.Literals.FONT_STYLE); if (edgeFontStyle != null) { FontData fontData = PreferenceConverter.getFontData(prefStore, IPreferenceConstants.PREF_DEFAULT_FONT); edgeFontStyle.setFontName(fontData.getName()); edgeFontStyle.setFontHeight(fontData.getHeight()); edgeFontStyle.setBold((fontData.getStyle() & SWT.BOLD) != 0); edgeFontStyle.setItalic((fontData.getStyle() & SWT.ITALIC) != 0); org.eclipse.swt.graphics.RGB fontRGB = PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_FONT_COLOR); edgeFontStyle.setFontColor(FigureUtilities.RGBToInteger(fontRGB).intValue()); } Routing routing = Routing.get(prefStore.getInt(IPreferenceConstants.PREF_LINE_STYLE)); if (routing != null) { ViewUtil.setStructuralFeatureValue( edge, NotationPackage.eINSTANCE.getRoutingStyle_Routing(), routing); } Node label6001 = createLabel( edge, edu.toronto.cs.se.modelepedia.necsis14_classdiagram.diagram.part .NECSIS14_ClassDiagramVisualIDRegistry.getType( edu.toronto.cs.se.modelepedia.necsis14_classdiagram.diagram.edit.parts .AssociationNameEditPart.VISUAL_ID)); label6001.setLayoutConstraint(NotationFactory.eINSTANCE.createLocation()); Location location6001 = (Location) label6001.getLayoutConstraint(); location6001.setX(0); location6001.setY(40); return edge; }
/** * initialize label location. * * @param view the element to initialize * @param store the preference store * @param elementName the name to the element */ public static void initLabelLocationFromPrefs( View view, final IPreferenceStore store, String elementName) { assert (view instanceof Node); Node label = (Node) view; Location location = (Location) label.getLayoutConstraint(); String xKey = getpreferenceKey(view, elementName, PreferenceConstantHelper.LOCATION_X); String yKey = getpreferenceKey(view, elementName, PreferenceConstantHelper.LOCATION_Y); location.setX(store.getInt(xKey)); location.setY(store.getInt(yKey)); label.setLayoutConstraint(location); }
/** @generated */ public Node createStakeHolder_2011( EObject domainElement, View containerView, int index, boolean persisted, PreferencesHint preferencesHint) { Shape node = NotationFactory.eINSTANCE.createShape(); node.setLayoutConstraint(NotationFactory.eINSTANCE.createBounds()); node.setType(RdalVisualIDRegistry.getType(StakeHolderEditPart.VISUAL_ID)); ViewUtil.insertChildView(containerView, node, index, persisted); node.setElement(domainElement); stampShortcut(containerView, node); // initializeFromPreferences final IPreferenceStore prefStore = (IPreferenceStore) preferencesHint.getPreferenceStore(); org.eclipse.swt.graphics.RGB lineRGB = PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_LINE_COLOR); ViewUtil.setStructuralFeatureValue( node, NotationPackage.eINSTANCE.getLineStyle_LineColor(), FigureUtilities.RGBToInteger(lineRGB)); FontStyle nodeFontStyle = (FontStyle) node.getStyle(NotationPackage.Literals.FONT_STYLE); if (nodeFontStyle != null) { FontData fontData = PreferenceConverter.getFontData(prefStore, IPreferenceConstants.PREF_DEFAULT_FONT); nodeFontStyle.setFontName(fontData.getName()); nodeFontStyle.setFontHeight(fontData.getHeight()); nodeFontStyle.setBold((fontData.getStyle() & SWT.BOLD) != 0); nodeFontStyle.setItalic((fontData.getStyle() & SWT.ITALIC) != 0); org.eclipse.swt.graphics.RGB fontRGB = PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_FONT_COLOR); nodeFontStyle.setFontColor(FigureUtilities.RGBToInteger(fontRGB).intValue()); } org.eclipse.swt.graphics.RGB fillRGB = PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_FILL_COLOR); ViewUtil.setStructuralFeatureValue( node, NotationPackage.eINSTANCE.getFillStyle_FillColor(), FigureUtilities.RGBToInteger(fillRGB)); Node label5018 = createLabel(node, RdalVisualIDRegistry.getType(StakeHolderNameEditPart.VISUAL_ID)); label5018.setLayoutConstraint(NotationFactory.eINSTANCE.createLocation()); Location location5018 = (Location) label5018.getLayoutConstraint(); location5018.setX(0); location5018.setY(5); return node; }
/** @generated */ public Edge createForeignKey_3001( EObject domainElement, View containerView, int index, boolean persisted, PreferencesHint preferencesHint) { Edge edge = NotationFactory.eINSTANCE.createEdge(); edge.getStyles().add(NotationFactory.eINSTANCE.createRoutingStyle()); edge.getStyles().add(NotationFactory.eINSTANCE.createFontStyle()); RelativeBendpoints bendpoints = NotationFactory.eINSTANCE.createRelativeBendpoints(); ArrayList points = new ArrayList(2); points.add(new RelativeBendpoint()); points.add(new RelativeBendpoint()); bendpoints.setPoints(points); edge.setBendpoints(bendpoints); ViewUtil.insertChildView(containerView, edge, index, persisted); edge.setType(SqlmodelVisualIDRegistry.getType(ForeignKeyEditPart.VISUAL_ID)); edge.setElement(domainElement); // initializePreferences final IPreferenceStore prefStore = (IPreferenceStore) preferencesHint.getPreferenceStore(); FontStyle edgeFontStyle = (FontStyle) edge.getStyle(NotationPackage.Literals.FONT_STYLE); if (edgeFontStyle != null) { FontData fontData = PreferenceConverter.getFontData(prefStore, IPreferenceConstants.PREF_DEFAULT_FONT); edgeFontStyle.setFontName(fontData.getName()); edgeFontStyle.setFontHeight(fontData.getHeight()); edgeFontStyle.setBold((fontData.getStyle() & SWT.BOLD) != 0); edgeFontStyle.setItalic((fontData.getStyle() & SWT.ITALIC) != 0); org.eclipse.swt.graphics.RGB fontRGB = PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_FONT_COLOR); edgeFontStyle.setFontColor(FigureUtilities.RGBToInteger(fontRGB).intValue()); } Routing routing = Routing.get(prefStore.getInt(IPreferenceConstants.PREF_LINE_STYLE)); if (routing != null) { ViewUtil.setStructuralFeatureValue( edge, NotationPackage.eINSTANCE.getRoutingStyle_Routing(), routing); } Node label4003 = createLabel(edge, SqlmodelVisualIDRegistry.getType(ForeignKeyNameEditPart.VISUAL_ID)); label4003.setLayoutConstraint(NotationFactory.eINSTANCE.createLocation()); Location location4003 = (Location) label4003.getLayoutConstraint(); location4003.setX(1); location4003.setY(-15); return edge; }
/** @generated */ public View createView( IAdaptable semanticAdapter, View containerView, String semanticHint, int index, boolean persisted, PreferencesHint preferencesHint) { Node view = (Node) super.createView( semanticAdapter, containerView, semanticHint, index, persisted, preferencesHint); Location location = (Location) view.getLayoutConstraint(); IMapMode mapMode = MeasurementUnitHelper.getMapMode(containerView.getDiagram().getMeasurementUnit()); location.setX(mapMode.DPtoLP(0)); location.setY(mapMode.DPtoLP(5)); return view; }
protected void setPreferredSize() { Node node = (Node) getContextObject(); Bounds bounds = (Bounds) node.getLayoutConstraint(); bounds.setWidth(-1); bounds.setHeight(-1); }
/** * Check that : * * <UL> * <LI>the size of new collapsed bordered nodes is 1x1 (and not the same as not collapsed), * <LI>the space between two new collapsed bordered nodes is the same as between two new normal * bordered nodes. * <LI>the size of an existing bordered nodes is 1x1 after collapse filter application, and its * location is contains in the original bounds. * </UL> * * Steps of this test: * * <UL> * <LI>Open a first diagram * <UL> * <LI>modify the semantic (causing creation of new ports), * <LI>take the bounds of new ports (without collapse filter), * <LI>take the space between them, * <LI>apply the collapse filter, * <LI>check that the size of the port is 1x1 and its new location is contained in the old * bounds, * <LI>close the diagram, * <LI>undo the semantic modifications, * </UL> * <LI>Open a new diagram, * <UL> * <LI>enable the collapse filter, * <LI>make the same semantic modifications (causing creation of new ports), * <LI>compare the size ans the space with previous diagram. * </UL> * </UL> * * See VP-3833 */ public void testPortLocationsAndMoreWithForCollapseFilter() { // Get the desired package final Model model = (Model) semanticModel; assertNotNull("Corrupted input data", model); // Get the class named "Class2" PackageableElement element = model.getPackagedElement("Class2"); assertTrue("Corrupted input data", element instanceof Class); final Class class2 = (Class) element; // Get the class named "Class3" element = model.getPackagedElement("Class3"); assertTrue("Corrupted input data", element instanceof Class); final Class class3 = (Class) element; // Get the diagram for the root of this model. diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model); // Open the editor (and refresh it) IEditorPart editorPart = DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor()); TestsUtil.synchronizationWithUIThread(); // Add 3 Property to class3 (that will cause the creation of 3 // new ports during refresh) String prefix = "aPort"; addProperties(class3, class2, "aPort", 3); // Refresh the diagram refresh(diagram); Property thirdProperty = class3.getOwnedAttribute(prefix + 1, class2); DDiagramElement thirdPropertyDiagramElement = getFirstDiagramElement(diagram, thirdProperty); Node thirdPropertyNode = getGmfNode(thirdPropertyDiagramElement); final Bounds expectedThirdBounds = (Bounds) thirdPropertyNode.getLayoutConstraint(); Property fourthProperty = class3.getOwnedAttribute(prefix + 2, class2); DDiagramElement fourthPropertyDiagramElement = getFirstDiagramElement(diagram, fourthProperty); Node fourthPropertyNode = getGmfNode(fourthPropertyDiagramElement); final Bounds expectedFourthBounds = (Bounds) fourthPropertyNode.getLayoutConstraint(); Property fifthProperty = class3.getOwnedAttribute(prefix + 3, class2); DDiagramElement fifthPropertyDiagramElement = getFirstDiagramElement(diagram, fifthProperty); Node fifthPropertyNode = getGmfNode(fifthPropertyDiagramElement); final Bounds expectedFifthBounds = (Bounds) fifthPropertyNode.getLayoutConstraint(); // Activate the filter activateFilter(diagram, "FilterPropertyStartingWithA"); // Refresh the diagram refresh(diagram); // Check the size and the new location of one of the collapsed bordered // node final Bounds collapseThirdBounds = (Bounds) thirdPropertyNode.getLayoutConstraint(); assertEquals( "The width of the collapse bordered node is not OK.", 1, collapseThirdBounds.getWidth()); assertEquals( "The height of the collapse bordered node is not OK.", 1, collapseThirdBounds.getHeight()); assertTrue( "The new collapsed location should be contains in the not collapsed bounds.", new Rectangle( expectedThirdBounds.getX(), expectedThirdBounds.getY(), expectedThirdBounds.getWidth(), expectedThirdBounds.getHeight()) .contains(new Point(collapseThirdBounds.getX(), collapseThirdBounds.getY()))); DialectUIManager.INSTANCE.closeEditor(editorPart, false); TestsUtil.synchronizationWithUIThread(); // Remove the 3 added properties removeProperties(class3, 3); // Get the diagram for the root of this model. diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model); // Open the editor (and refresh it) editorPart = DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor()); TestsUtil.synchronizationWithUIThread(); // Activate the filter activateFilter(diagram, "FilterPropertyStartingWithA"); // Add 3 Property to class3 (that will cause the creation of 3 // new ports during refresh) addProperties(class3, class2, "aPort", 3); // Refresh the diagram refresh(diagram); thirdProperty = class3.getOwnedAttribute(prefix + 1, class2); thirdPropertyDiagramElement = getFirstDiagramElement(diagram, thirdProperty); thirdPropertyNode = getGmfNode(thirdPropertyDiagramElement); Bounds thirdCollapseBounds = (Bounds) thirdPropertyNode.getLayoutConstraint(); assertEquals( "The width of a new collapsed bordered node is not correct.", 1, thirdCollapseBounds.getWidth()); assertEquals( "The height of a new collapsed bordered node is not correct.", 1, thirdCollapseBounds.getHeight()); fourthProperty = class3.getOwnedAttribute(prefix + 2, class2); fourthPropertyDiagramElement = getFirstDiagramElement(diagram, fourthProperty); fourthPropertyNode = getGmfNode(fourthPropertyDiagramElement); Bounds fourthCollapseBounds = (Bounds) fourthPropertyNode.getLayoutConstraint(); assertEquals( "The width of a new collapsed bordered node is not correct.", 1, fourthCollapseBounds.getWidth()); assertEquals( "The height of a new collapsed bordered node is not correct.", 1, fourthCollapseBounds.getHeight()); fifthProperty = class3.getOwnedAttribute(prefix + 3, class2); fifthPropertyDiagramElement = getFirstDiagramElement(diagram, fifthProperty); fifthPropertyNode = getGmfNode(fifthPropertyDiagramElement); Bounds fifthCollapseBounds = (Bounds) fifthPropertyNode.getLayoutConstraint(); assertEquals( "The width of a new collapsed bordered node is not correct.", 1, fifthCollapseBounds.getWidth()); assertEquals( "The height of a new collapsed bordered node is not correct.", 1, fifthCollapseBounds.getHeight()); assertEquals( "The space bewteen the collapsed bordered nodes should be the same as between the not collapsed bordered nodes.", expectedFourthBounds.getY() - expectedThirdBounds.getY(), fourthCollapseBounds.getY() - thirdCollapseBounds.getY()); assertEquals( "The space bewteen the collapsed bordered nodes should be the same as between the not collapsed bordered nodes.", expectedFifthBounds.getY() - expectedFourthBounds.getY(), fifthCollapseBounds.getY() - fourthCollapseBounds.getY()); DialectUIManager.INSTANCE.closeEditor(editorPart, false); TestsUtil.synchronizationWithUIThread(); }
/** * Open the diagram, modify the semantic (causing creation of new ports), check the position of * new ports (not the same). See VP-3095 */ protected void testPortLocationAfterRefresh(boolean activateCollapseFilter) { // Get the desired package final Model model = (Model) semanticModel; assertNotNull("Corrupted input data", model); // Get the diagram for the root of this model. diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model); // Get the class named "Class2" PackageableElement element = model.getPackagedElement("Class2"); assertTrue("Corrupted input data", element instanceof Class); final Class class2 = (Class) element; // Get the class named "Class3" element = model.getPackagedElement("Class3"); assertTrue("Corrupted input data", element instanceof Class); final Class class3 = (Class) element; final Property firstProperty = class3.getOwnedAttribute("Prop3to2", class2); final Property secondProperty = class3.getOwnedAttribute("OtherProp3to2", class2); // Open the editor (and refresh it) final IEditorPart editorPart = DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor()); TestsUtil.synchronizationWithUIThread(); if (activateCollapseFilter) { activateFilter(diagram, "FilterPropertyStartingWithA"); } // Add 3 Property to class3 (that will cause the creation of 3 // new ports during refresh). addProperties(class3, class2, "Prop3to2_", 3); // Refresh the diagram refresh(diagram); final DDiagramElement firstPropertyDiagramElement = getFirstDiagramElement(diagram, firstProperty); assertNotNull( "The first property has no corresponding diagramElement", firstPropertyDiagramElement); final Node firstPropertyNode = getGmfNode(firstPropertyDiagramElement); assertNotNull("The first property has no corresponding GMF node", firstPropertyNode); assertTrue( "Bag layout constraint type", firstPropertyNode.getLayoutConstraint() instanceof Location); final Location firstLocation = (Location) firstPropertyNode.getLayoutConstraint(); final DDiagramElement secondPropertyDiagramElement = getFirstDiagramElement(diagram, secondProperty); assertNotNull( "The second property has no corresponding diagramElement", secondPropertyDiagramElement); final Node secondPropertyNode = getGmfNode(secondPropertyDiagramElement); assertNotNull("The second property has no corresponding GMF node", secondPropertyNode); assertTrue( "Bag layout constraint type", secondPropertyNode.getLayoutConstraint() instanceof Location); final Location secondLocation = (Location) secondPropertyNode.getLayoutConstraint(); assertFalse( "All the layout constraints of the ports should not be in {0,0}", firstLocation.getX() == 0 && firstLocation.getY() == 0 && secondLocation.getX() == 0 && secondLocation.getY() == 0); assertTrue( "All the layout constraints of the ports should be different", firstLocation.getX() != secondLocation.getX() || firstLocation.getY() != secondLocation.getY()); final Property thirdProperty = class3.getOwnedAttribute("Prop3to2_1", class2); final Property fourthProperty = class3.getOwnedAttribute("Prop3to2_2", class2); final Property fifthProperty = class3.getOwnedAttribute("Prop3to2_3", class2); final DDiagramElement thirdPropertyDiagramElement = getFirstDiagramElement(diagram, thirdProperty); assertNotNull( "The third property has no corresponding diagramElement", thirdPropertyDiagramElement); final Node thirdPropertyNode = getGmfNode(thirdPropertyDiagramElement); assertNotNull("The third property has no corresponding GMF node", thirdPropertyNode); assertTrue( "Bag layout constraint type", thirdPropertyNode.getLayoutConstraint() instanceof Location); final Location thirdLocation = (Location) thirdPropertyNode.getLayoutConstraint(); final DDiagramElement fourthPropertyDiagramElement = getFirstDiagramElement(diagram, fourthProperty); assertNotNull( "The fourth property has no corresponding diagramElement", fourthPropertyDiagramElement); final Node fourthPropertyNode = getGmfNode(fourthPropertyDiagramElement); assertNotNull("The fourth property has no corresponding GMF node", fourthPropertyNode); assertTrue( "Bag layout constraint type", fourthPropertyNode.getLayoutConstraint() instanceof Location); final Location fourthLocation = (Location) fourthPropertyNode.getLayoutConstraint(); final DDiagramElement fifthPropertyDiagramElement = getFirstDiagramElement(diagram, fifthProperty); assertNotNull( "The fifth property has no corresponding diagramElement", fifthPropertyDiagramElement); final Node fifthPropertyNode = getGmfNode(fifthPropertyDiagramElement); assertNotNull("The fifth property has no corresponding GMF node", fifthPropertyNode); assertTrue( "Bag layout constraint type", fifthPropertyNode.getLayoutConstraint() instanceof Location); final Location fifthLocation = (Location) fifthPropertyNode.getLayoutConstraint(); assertFalse( "All the layout constraints of the ports should not be in {0,0}", thirdLocation.getX() == 0 && thirdLocation.getY() == 0 && fourthLocation.getX() == 0 && fourthLocation.getY() == 0 && fifthLocation.getX() == 0 && fifthLocation.getY() == 0); assertTrue( "All the layout constraints of the ports should be different", thirdLocation.getX() != fourthLocation.getX() || thirdLocation.getY() != fourthLocation.getY()); assertTrue( "All the layout constraints of the ports should be different", thirdLocation.getX() != fifthLocation.getX() || thirdLocation.getY() != fifthLocation.getY()); assertTrue( "All the layout constraints of the ports should be different", fifthLocation.getX() != fourthLocation.getX() || fifthLocation.getY() != fourthLocation.getY()); DialectUIManager.INSTANCE.closeEditor(editorPart, false); TestsUtil.synchronizationWithUIThread(); }
/** * Corresponds to ticket #1811. Check that after a creation of a diagram with ports from an * existing diagram, the layoutConstraint of all ports is not {0, 0}. */ public void testPortLocationForCreationFromNavigation() { // Get the desired package final Model model = (Model) semanticModel; assertNotNull("Corrupted input data", model); // Get the diagram for the root of this model. diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model); // Open the editor (and refresh it) final IEditorPart editorPart = DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor()); TestsUtil.synchronizationWithUIThread(); // Set the focus to the desired package assertTrue( "We should have a DiagramDocumentEditor", editorPart instanceof DiagramDocumentEditor); final DiagramDocumentEditor diagramEditor = (DiagramDocumentEditor) editorPart; // Get the package named "SubPackage" PackageableElement element = model.getPackagedElement("SubPackage"); assertTrue("Corrupted input data", element instanceof Package); final Package packageSubPackage = (Package) element; IMenuManager popupMenu = new MenuManager(); popupMenu.add( new MenuManager( IWorkbenchActionConstants.MB_ADDITIONS, IWorkbenchActionConstants.MB_ADDITIONS)); // $NON-NLS-1$ //$NON-NLS-2$ popupMenu.add(new MenuManager("popup.new", "popup.new")); // $NON-NLS-1$ // Set the focus to package SubPackage IGraphicalEditPart elementEditPart = getEditPart(getFirstDiagramElement(diagram, packageSubPackage)); diagramEditor.getDiagramGraphicalViewer().setFocus(elementEditPart); DNode focusedElement = (DNode) ((GraphicalEditPart) diagramEditor.getDiagramGraphicalViewer().getFocusEditPart()) .resolveSemanticElement(); assertTrue( "This is not the good focused element", focusedElement.getTarget() instanceof Package); assertEquals( "This is not the good focused element", "SubPackage", ((Package) focusedElement.getTarget()).getName()); ContributionItemService.getInstance().contributeToPopupMenu(popupMenu, diagramEditor); // Check the popup menu. IMenuManager newRepresentationMenu = (IMenuManager) popupMenu.find("popup.new"); IContributionItem[] items = newRepresentationMenu.getItems(); boolean inNewRepresentationToGroup = false; ActionContributionItem actionContribution = null; for (int i = 0; i < items.length; i++) { if (items[i] instanceof Separator) { Separator sep = (Separator) items[i]; if ("createRepresentationGroup".equals(sep.getId())) { inNewRepresentationToGroup = true; } else { inNewRepresentationToGroup = false; } } if (inNewRepresentationToGroup && items[i] instanceof ActionContributionItem) { assertNull("There should be only one ActionContributionItem", actionContribution); actionContribution = (ActionContributionItem) items[i]; } } assertNotNull("There should be one ActionContributionItem", actionContribution); final IAction action = actionContribution.getAction(); assertEquals("Action has not the correct text", "New diagram", action.getText()); // Disabling ui callback of diagram command factory final Object adapter = diagramEditor.getAdapter(IDiagramCommandFactoryProvider.class); final IDiagramCommandFactoryProvider diagramCmdFactoryProvider = (IDiagramCommandFactoryProvider) adapter; final IDiagramCommandFactory diagramCommandFactory = diagramCmdFactoryProvider.getCommandFactory(session.getTransactionalEditingDomain()); diagramCommandFactory.setUserInterfaceCallBack(new NoUICallback()); action.run(); IEditorPart editor2 = PlatformUI.getWorkbench().getActiveWorkbenchWindow().getActivePage().getActiveEditor(); assertTrue("We should have a DiagramDocumentEditor", editor2 instanceof DiagramDocumentEditor); final DiagramDocumentEditor diagramEditor2 = (DiagramDocumentEditor) editor2; GraphicalEditPart diagramPart = (GraphicalEditPart) diagramEditor2.getDiagramEditPart(); final DSemanticDiagram diagram2 = (DSemanticDiagram) diagramPart.resolveSemanticElement(); assertEquals( "The opened diagram is not valid", diagram2.getTarget(), focusedElement.getTarget()); // Get the class named "SubClass1" element = packageSubPackage.getPackagedElement("SubClass1"); assertTrue("Corrupted input data", element instanceof Class); final Class subClass1 = (Class) element; final Property firstProperty = subClass1.getOwnedAttribute("Prop1", subClass1); final Property secondProperty = subClass1.getOwnedAttribute("Prop2", subClass1); final DDiagramElement firstPropertyDiagramElement = getFirstDiagramElement(diagram2, firstProperty); assertNotNull( "The first property has no corresponding diagramElement", firstPropertyDiagramElement); final Node firstPropertyNode = getGmfNode(firstPropertyDiagramElement); assertNotNull("The first property has no corresponding GMF node", firstPropertyNode); assertTrue( "Bag layout constraint type", firstPropertyNode.getLayoutConstraint() instanceof Location); final Location firstLocation = (Location) firstPropertyNode.getLayoutConstraint(); final DDiagramElement secondPropertyDiagramElement = getFirstDiagramElement(diagram2, secondProperty); assertNotNull( "The second property has no corresponding diagramElement", secondPropertyDiagramElement); final Node secondPropertyNode = getGmfNode(secondPropertyDiagramElement); assertNotNull("The second property has no corresponding GMF node", secondPropertyNode); assertTrue( "Bag layout constraint type", secondPropertyNode.getLayoutConstraint() instanceof Location); final Location secondLocation = (Location) secondPropertyNode.getLayoutConstraint(); assertFalse( "All the layout constraints of the ports should not be in {0,0}", firstLocation.getX() == 0 && firstLocation.getY() == 0 && secondLocation.getX() == 0 && secondLocation.getY() == 0); assertTrue( "All the layout constraints of the ports should be different", firstLocation.getX() != secondLocation.getX() || firstLocation.getY() != secondLocation.getY()); DialectUIManager.INSTANCE.closeEditor(editorPart, false); TestsUtil.synchronizationWithUIThread(); DialectUIManager.INSTANCE.closeEditor(editor2, false); TestsUtil.synchronizationWithUIThread(); }