/**
* Corresponds to ticket #1811. Check that after a creation of a diagram with ports (on node) from
* the model content view , the layoutConstraint of all ports is not {0, 0}.
*/
public void testPortLocationForCreationFromModelContentView() {
// Get the desired package
final Model model = (Model) semanticModel;
assertNotNull("Corrupted input data", model);
// Get the diagram for the root of this model.
diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model);
// Get the class named "Class2"
PackageableElement element = model.getPackagedElement("Class2");
assertTrue("Corrupted input data", element instanceof Class);
final Class class2 = (Class) element;
// Get the class named "Class3"
element = model.getPackagedElement("Class3");
assertTrue("Corrupted input data", element instanceof Class);
final Class class3 = (Class) element;
final Property firstProperty = class3.getOwnedAttribute("Prop3to2", class2);
final Property secondProperty = class3.getOwnedAttribute("OtherProp3to2", class2);
// Open the editor (and refresh it)
final IEditorPart editorPart =
DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
final DDiagramElement firstPropertyDiagramElement =
getFirstDiagramElement(diagram, firstProperty);
assertNotNull(
"The first property has no corresponding diagramElement", firstPropertyDiagramElement);
final Node firstPropertyNode = getGmfNode(firstPropertyDiagramElement);
assertNotNull("The first property has no corresponding GMF node", firstPropertyNode);
assertTrue(
"Bag layout constraint type", firstPropertyNode.getLayoutConstraint() instanceof Location);
final Location firstLocation = (Location) firstPropertyNode.getLayoutConstraint();
final DDiagramElement secondPropertyDiagramElement =
getFirstDiagramElement(diagram, secondProperty);
assertNotNull(
"The second property has no corresponding diagramElement", secondPropertyDiagramElement);
final Node secondPropertyNode = getGmfNode(secondPropertyDiagramElement);
assertNotNull("The second property has no corresponding GMF node", secondPropertyNode);
assertTrue(
"Bag layout constraint type", secondPropertyNode.getLayoutConstraint() instanceof Location);
final Location secondLocation = (Location) secondPropertyNode.getLayoutConstraint();
assertFalse(
"All the layout constraints of the ports should not be in {0,0}",
firstLocation.getX() == 0
&& firstLocation.getY() == 0
&& secondLocation.getX() == 0
&& secondLocation.getY() == 0);
assertTrue(
"All the layout constraints of the ports should be different",
firstLocation.getX() != secondLocation.getX()
|| firstLocation.getY() != secondLocation.getY());
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
}
/*
* (non-Javadoc)
*
* @see org.eclipse.papyrus.layout.LayouttoolInterface#getBounds(org.eclipse.gef.EditPart)
*/
public Rectangle getBounds(EditPart element) {
if (element.getModel() instanceof Node) {
Node node = (Node) element.getModel();
if (node.getLayoutConstraint() instanceof Bounds) {
Bounds bounds = (Bounds) node.getLayoutConstraint();
return new Rectangle(bounds.getX(), bounds.getY(), bounds.getWidth(), bounds.getHeight());
}
}
return null;
}
/** @generated */
public Edge createAssociation_4001(
EObject domainElement,
View containerView,
int index,
boolean persisted,
PreferencesHint preferencesHint) {
Connector edge = NotationFactory.eINSTANCE.createConnector();
edge.getStyles().add(NotationFactory.eINSTANCE.createFontStyle());
RelativeBendpoints bendpoints = NotationFactory.eINSTANCE.createRelativeBendpoints();
ArrayList<RelativeBendpoint> points = new ArrayList<RelativeBendpoint>(2);
points.add(new RelativeBendpoint());
points.add(new RelativeBendpoint());
bendpoints.setPoints(points);
edge.setBendpoints(bendpoints);
ViewUtil.insertChildView(containerView, edge, index, persisted);
edge.setType(
edu.toronto.cs.se.modelepedia.necsis14_classdiagram.diagram.part
.NECSIS14_ClassDiagramVisualIDRegistry.getType(
edu.toronto.cs.se.modelepedia.necsis14_classdiagram.diagram.edit.parts
.AssociationEditPart.VISUAL_ID));
edge.setElement(domainElement);
// initializePreferences
final IPreferenceStore prefStore = (IPreferenceStore) preferencesHint.getPreferenceStore();
org.eclipse.swt.graphics.RGB lineRGB =
PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_LINE_COLOR);
ViewUtil.setStructuralFeatureValue(
edge,
NotationPackage.eINSTANCE.getLineStyle_LineColor(),
FigureUtilities.RGBToInteger(lineRGB));
FontStyle edgeFontStyle = (FontStyle) edge.getStyle(NotationPackage.Literals.FONT_STYLE);
if (edgeFontStyle != null) {
FontData fontData =
PreferenceConverter.getFontData(prefStore, IPreferenceConstants.PREF_DEFAULT_FONT);
edgeFontStyle.setFontName(fontData.getName());
edgeFontStyle.setFontHeight(fontData.getHeight());
edgeFontStyle.setBold((fontData.getStyle() & SWT.BOLD) != 0);
edgeFontStyle.setItalic((fontData.getStyle() & SWT.ITALIC) != 0);
org.eclipse.swt.graphics.RGB fontRGB =
PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_FONT_COLOR);
edgeFontStyle.setFontColor(FigureUtilities.RGBToInteger(fontRGB).intValue());
}
Routing routing = Routing.get(prefStore.getInt(IPreferenceConstants.PREF_LINE_STYLE));
if (routing != null) {
ViewUtil.setStructuralFeatureValue(
edge, NotationPackage.eINSTANCE.getRoutingStyle_Routing(), routing);
}
Node label6001 =
createLabel(
edge,
edu.toronto.cs.se.modelepedia.necsis14_classdiagram.diagram.part
.NECSIS14_ClassDiagramVisualIDRegistry.getType(
edu.toronto.cs.se.modelepedia.necsis14_classdiagram.diagram.edit.parts
.AssociationNameEditPart.VISUAL_ID));
label6001.setLayoutConstraint(NotationFactory.eINSTANCE.createLocation());
Location location6001 = (Location) label6001.getLayoutConstraint();
location6001.setX(0);
location6001.setY(40);
return edge;
}
/**
* initialize label location.
*
* @param view the element to initialize
* @param store the preference store
* @param elementName the name to the element
*/
public static void initLabelLocationFromPrefs(
View view, final IPreferenceStore store, String elementName) {
assert (view instanceof Node);
Node label = (Node) view;
Location location = (Location) label.getLayoutConstraint();
String xKey = getpreferenceKey(view, elementName, PreferenceConstantHelper.LOCATION_X);
String yKey = getpreferenceKey(view, elementName, PreferenceConstantHelper.LOCATION_Y);
location.setX(store.getInt(xKey));
location.setY(store.getInt(yKey));
label.setLayoutConstraint(location);
}
/** @generated */
public Node createStakeHolder_2011(
EObject domainElement,
View containerView,
int index,
boolean persisted,
PreferencesHint preferencesHint) {
Shape node = NotationFactory.eINSTANCE.createShape();
node.setLayoutConstraint(NotationFactory.eINSTANCE.createBounds());
node.setType(RdalVisualIDRegistry.getType(StakeHolderEditPart.VISUAL_ID));
ViewUtil.insertChildView(containerView, node, index, persisted);
node.setElement(domainElement);
stampShortcut(containerView, node);
// initializeFromPreferences
final IPreferenceStore prefStore = (IPreferenceStore) preferencesHint.getPreferenceStore();
org.eclipse.swt.graphics.RGB lineRGB =
PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_LINE_COLOR);
ViewUtil.setStructuralFeatureValue(
node,
NotationPackage.eINSTANCE.getLineStyle_LineColor(),
FigureUtilities.RGBToInteger(lineRGB));
FontStyle nodeFontStyle = (FontStyle) node.getStyle(NotationPackage.Literals.FONT_STYLE);
if (nodeFontStyle != null) {
FontData fontData =
PreferenceConverter.getFontData(prefStore, IPreferenceConstants.PREF_DEFAULT_FONT);
nodeFontStyle.setFontName(fontData.getName());
nodeFontStyle.setFontHeight(fontData.getHeight());
nodeFontStyle.setBold((fontData.getStyle() & SWT.BOLD) != 0);
nodeFontStyle.setItalic((fontData.getStyle() & SWT.ITALIC) != 0);
org.eclipse.swt.graphics.RGB fontRGB =
PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_FONT_COLOR);
nodeFontStyle.setFontColor(FigureUtilities.RGBToInteger(fontRGB).intValue());
}
org.eclipse.swt.graphics.RGB fillRGB =
PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_FILL_COLOR);
ViewUtil.setStructuralFeatureValue(
node,
NotationPackage.eINSTANCE.getFillStyle_FillColor(),
FigureUtilities.RGBToInteger(fillRGB));
Node label5018 =
createLabel(node, RdalVisualIDRegistry.getType(StakeHolderNameEditPart.VISUAL_ID));
label5018.setLayoutConstraint(NotationFactory.eINSTANCE.createLocation());
Location location5018 = (Location) label5018.getLayoutConstraint();
location5018.setX(0);
location5018.setY(5);
return node;
}
/** @generated */
public Edge createForeignKey_3001(
EObject domainElement,
View containerView,
int index,
boolean persisted,
PreferencesHint preferencesHint) {
Edge edge = NotationFactory.eINSTANCE.createEdge();
edge.getStyles().add(NotationFactory.eINSTANCE.createRoutingStyle());
edge.getStyles().add(NotationFactory.eINSTANCE.createFontStyle());
RelativeBendpoints bendpoints = NotationFactory.eINSTANCE.createRelativeBendpoints();
ArrayList points = new ArrayList(2);
points.add(new RelativeBendpoint());
points.add(new RelativeBendpoint());
bendpoints.setPoints(points);
edge.setBendpoints(bendpoints);
ViewUtil.insertChildView(containerView, edge, index, persisted);
edge.setType(SqlmodelVisualIDRegistry.getType(ForeignKeyEditPart.VISUAL_ID));
edge.setElement(domainElement);
// initializePreferences
final IPreferenceStore prefStore = (IPreferenceStore) preferencesHint.getPreferenceStore();
FontStyle edgeFontStyle = (FontStyle) edge.getStyle(NotationPackage.Literals.FONT_STYLE);
if (edgeFontStyle != null) {
FontData fontData =
PreferenceConverter.getFontData(prefStore, IPreferenceConstants.PREF_DEFAULT_FONT);
edgeFontStyle.setFontName(fontData.getName());
edgeFontStyle.setFontHeight(fontData.getHeight());
edgeFontStyle.setBold((fontData.getStyle() & SWT.BOLD) != 0);
edgeFontStyle.setItalic((fontData.getStyle() & SWT.ITALIC) != 0);
org.eclipse.swt.graphics.RGB fontRGB =
PreferenceConverter.getColor(prefStore, IPreferenceConstants.PREF_FONT_COLOR);
edgeFontStyle.setFontColor(FigureUtilities.RGBToInteger(fontRGB).intValue());
}
Routing routing = Routing.get(prefStore.getInt(IPreferenceConstants.PREF_LINE_STYLE));
if (routing != null) {
ViewUtil.setStructuralFeatureValue(
edge, NotationPackage.eINSTANCE.getRoutingStyle_Routing(), routing);
}
Node label4003 =
createLabel(edge, SqlmodelVisualIDRegistry.getType(ForeignKeyNameEditPart.VISUAL_ID));
label4003.setLayoutConstraint(NotationFactory.eINSTANCE.createLocation());
Location location4003 = (Location) label4003.getLayoutConstraint();
location4003.setX(1);
location4003.setY(-15);
return edge;
}
/** @generated */
public View createView(
IAdaptable semanticAdapter,
View containerView,
String semanticHint,
int index,
boolean persisted,
PreferencesHint preferencesHint) {
Node view =
(Node)
super.createView(
semanticAdapter, containerView, semanticHint, index, persisted, preferencesHint);
Location location = (Location) view.getLayoutConstraint();
IMapMode mapMode =
MeasurementUnitHelper.getMapMode(containerView.getDiagram().getMeasurementUnit());
location.setX(mapMode.DPtoLP(0));
location.setY(mapMode.DPtoLP(5));
return view;
}
protected void setPreferredSize() {
Node node = (Node) getContextObject();
Bounds bounds = (Bounds) node.getLayoutConstraint();
bounds.setWidth(-1);
bounds.setHeight(-1);
}
/**
* Check that :
*
* <UL>
* <LI>the size of new collapsed bordered nodes is 1x1 (and not the same as not collapsed),
* <LI>the space between two new collapsed bordered nodes is the same as between two new normal
* bordered nodes.
* <LI>the size of an existing bordered nodes is 1x1 after collapse filter application, and its
* location is contains in the original bounds.
* </UL>
*
* Steps of this test:
*
* <UL>
* <LI>Open a first diagram
* <UL>
* <LI>modify the semantic (causing creation of new ports),
* <LI>take the bounds of new ports (without collapse filter),
* <LI>take the space between them,
* <LI>apply the collapse filter,
* <LI>check that the size of the port is 1x1 and its new location is contained in the old
* bounds,
* <LI>close the diagram,
* <LI>undo the semantic modifications,
* </UL>
* <LI>Open a new diagram,
* <UL>
* <LI>enable the collapse filter,
* <LI>make the same semantic modifications (causing creation of new ports),
* <LI>compare the size ans the space with previous diagram.
* </UL>
* </UL>
*
* See VP-3833
*/
public void testPortLocationsAndMoreWithForCollapseFilter() {
// Get the desired package
final Model model = (Model) semanticModel;
assertNotNull("Corrupted input data", model);
// Get the class named "Class2"
PackageableElement element = model.getPackagedElement("Class2");
assertTrue("Corrupted input data", element instanceof Class);
final Class class2 = (Class) element;
// Get the class named "Class3"
element = model.getPackagedElement("Class3");
assertTrue("Corrupted input data", element instanceof Class);
final Class class3 = (Class) element;
// Get the diagram for the root of this model.
diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model);
// Open the editor (and refresh it)
IEditorPart editorPart =
DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
// Add 3 Property to class3 (that will cause the creation of 3
// new ports during refresh)
String prefix = "aPort";
addProperties(class3, class2, "aPort", 3);
// Refresh the diagram
refresh(diagram);
Property thirdProperty = class3.getOwnedAttribute(prefix + 1, class2);
DDiagramElement thirdPropertyDiagramElement = getFirstDiagramElement(diagram, thirdProperty);
Node thirdPropertyNode = getGmfNode(thirdPropertyDiagramElement);
final Bounds expectedThirdBounds = (Bounds) thirdPropertyNode.getLayoutConstraint();
Property fourthProperty = class3.getOwnedAttribute(prefix + 2, class2);
DDiagramElement fourthPropertyDiagramElement = getFirstDiagramElement(diagram, fourthProperty);
Node fourthPropertyNode = getGmfNode(fourthPropertyDiagramElement);
final Bounds expectedFourthBounds = (Bounds) fourthPropertyNode.getLayoutConstraint();
Property fifthProperty = class3.getOwnedAttribute(prefix + 3, class2);
DDiagramElement fifthPropertyDiagramElement = getFirstDiagramElement(diagram, fifthProperty);
Node fifthPropertyNode = getGmfNode(fifthPropertyDiagramElement);
final Bounds expectedFifthBounds = (Bounds) fifthPropertyNode.getLayoutConstraint();
// Activate the filter
activateFilter(diagram, "FilterPropertyStartingWithA");
// Refresh the diagram
refresh(diagram);
// Check the size and the new location of one of the collapsed bordered
// node
final Bounds collapseThirdBounds = (Bounds) thirdPropertyNode.getLayoutConstraint();
assertEquals(
"The width of the collapse bordered node is not OK.", 1, collapseThirdBounds.getWidth());
assertEquals(
"The height of the collapse bordered node is not OK.", 1, collapseThirdBounds.getHeight());
assertTrue(
"The new collapsed location should be contains in the not collapsed bounds.",
new Rectangle(
expectedThirdBounds.getX(),
expectedThirdBounds.getY(),
expectedThirdBounds.getWidth(),
expectedThirdBounds.getHeight())
.contains(new Point(collapseThirdBounds.getX(), collapseThirdBounds.getY())));
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
// Remove the 3 added properties
removeProperties(class3, 3);
// Get the diagram for the root of this model.
diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model);
// Open the editor (and refresh it)
editorPart = DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
// Activate the filter
activateFilter(diagram, "FilterPropertyStartingWithA");
// Add 3 Property to class3 (that will cause the creation of 3
// new ports during refresh)
addProperties(class3, class2, "aPort", 3);
// Refresh the diagram
refresh(diagram);
thirdProperty = class3.getOwnedAttribute(prefix + 1, class2);
thirdPropertyDiagramElement = getFirstDiagramElement(diagram, thirdProperty);
thirdPropertyNode = getGmfNode(thirdPropertyDiagramElement);
Bounds thirdCollapseBounds = (Bounds) thirdPropertyNode.getLayoutConstraint();
assertEquals(
"The width of a new collapsed bordered node is not correct.",
1,
thirdCollapseBounds.getWidth());
assertEquals(
"The height of a new collapsed bordered node is not correct.",
1,
thirdCollapseBounds.getHeight());
fourthProperty = class3.getOwnedAttribute(prefix + 2, class2);
fourthPropertyDiagramElement = getFirstDiagramElement(diagram, fourthProperty);
fourthPropertyNode = getGmfNode(fourthPropertyDiagramElement);
Bounds fourthCollapseBounds = (Bounds) fourthPropertyNode.getLayoutConstraint();
assertEquals(
"The width of a new collapsed bordered node is not correct.",
1,
fourthCollapseBounds.getWidth());
assertEquals(
"The height of a new collapsed bordered node is not correct.",
1,
fourthCollapseBounds.getHeight());
fifthProperty = class3.getOwnedAttribute(prefix + 3, class2);
fifthPropertyDiagramElement = getFirstDiagramElement(diagram, fifthProperty);
fifthPropertyNode = getGmfNode(fifthPropertyDiagramElement);
Bounds fifthCollapseBounds = (Bounds) fifthPropertyNode.getLayoutConstraint();
assertEquals(
"The width of a new collapsed bordered node is not correct.",
1,
fifthCollapseBounds.getWidth());
assertEquals(
"The height of a new collapsed bordered node is not correct.",
1,
fifthCollapseBounds.getHeight());
assertEquals(
"The space bewteen the collapsed bordered nodes should be the same as between the not collapsed bordered nodes.",
expectedFourthBounds.getY() - expectedThirdBounds.getY(),
fourthCollapseBounds.getY() - thirdCollapseBounds.getY());
assertEquals(
"The space bewteen the collapsed bordered nodes should be the same as between the not collapsed bordered nodes.",
expectedFifthBounds.getY() - expectedFourthBounds.getY(),
fifthCollapseBounds.getY() - fourthCollapseBounds.getY());
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
}
/**
* Open the diagram, modify the semantic (causing creation of new ports), check the position of
* new ports (not the same). See VP-3095
*/
protected void testPortLocationAfterRefresh(boolean activateCollapseFilter) {
// Get the desired package
final Model model = (Model) semanticModel;
assertNotNull("Corrupted input data", model);
// Get the diagram for the root of this model.
diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model);
// Get the class named "Class2"
PackageableElement element = model.getPackagedElement("Class2");
assertTrue("Corrupted input data", element instanceof Class);
final Class class2 = (Class) element;
// Get the class named "Class3"
element = model.getPackagedElement("Class3");
assertTrue("Corrupted input data", element instanceof Class);
final Class class3 = (Class) element;
final Property firstProperty = class3.getOwnedAttribute("Prop3to2", class2);
final Property secondProperty = class3.getOwnedAttribute("OtherProp3to2", class2);
// Open the editor (and refresh it)
final IEditorPart editorPart =
DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
if (activateCollapseFilter) {
activateFilter(diagram, "FilterPropertyStartingWithA");
}
// Add 3 Property to class3 (that will cause the creation of 3
// new ports during refresh).
addProperties(class3, class2, "Prop3to2_", 3);
// Refresh the diagram
refresh(diagram);
final DDiagramElement firstPropertyDiagramElement =
getFirstDiagramElement(diagram, firstProperty);
assertNotNull(
"The first property has no corresponding diagramElement", firstPropertyDiagramElement);
final Node firstPropertyNode = getGmfNode(firstPropertyDiagramElement);
assertNotNull("The first property has no corresponding GMF node", firstPropertyNode);
assertTrue(
"Bag layout constraint type", firstPropertyNode.getLayoutConstraint() instanceof Location);
final Location firstLocation = (Location) firstPropertyNode.getLayoutConstraint();
final DDiagramElement secondPropertyDiagramElement =
getFirstDiagramElement(diagram, secondProperty);
assertNotNull(
"The second property has no corresponding diagramElement", secondPropertyDiagramElement);
final Node secondPropertyNode = getGmfNode(secondPropertyDiagramElement);
assertNotNull("The second property has no corresponding GMF node", secondPropertyNode);
assertTrue(
"Bag layout constraint type", secondPropertyNode.getLayoutConstraint() instanceof Location);
final Location secondLocation = (Location) secondPropertyNode.getLayoutConstraint();
assertFalse(
"All the layout constraints of the ports should not be in {0,0}",
firstLocation.getX() == 0
&& firstLocation.getY() == 0
&& secondLocation.getX() == 0
&& secondLocation.getY() == 0);
assertTrue(
"All the layout constraints of the ports should be different",
firstLocation.getX() != secondLocation.getX()
|| firstLocation.getY() != secondLocation.getY());
final Property thirdProperty = class3.getOwnedAttribute("Prop3to2_1", class2);
final Property fourthProperty = class3.getOwnedAttribute("Prop3to2_2", class2);
final Property fifthProperty = class3.getOwnedAttribute("Prop3to2_3", class2);
final DDiagramElement thirdPropertyDiagramElement =
getFirstDiagramElement(diagram, thirdProperty);
assertNotNull(
"The third property has no corresponding diagramElement", thirdPropertyDiagramElement);
final Node thirdPropertyNode = getGmfNode(thirdPropertyDiagramElement);
assertNotNull("The third property has no corresponding GMF node", thirdPropertyNode);
assertTrue(
"Bag layout constraint type", thirdPropertyNode.getLayoutConstraint() instanceof Location);
final Location thirdLocation = (Location) thirdPropertyNode.getLayoutConstraint();
final DDiagramElement fourthPropertyDiagramElement =
getFirstDiagramElement(diagram, fourthProperty);
assertNotNull(
"The fourth property has no corresponding diagramElement", fourthPropertyDiagramElement);
final Node fourthPropertyNode = getGmfNode(fourthPropertyDiagramElement);
assertNotNull("The fourth property has no corresponding GMF node", fourthPropertyNode);
assertTrue(
"Bag layout constraint type", fourthPropertyNode.getLayoutConstraint() instanceof Location);
final Location fourthLocation = (Location) fourthPropertyNode.getLayoutConstraint();
final DDiagramElement fifthPropertyDiagramElement =
getFirstDiagramElement(diagram, fifthProperty);
assertNotNull(
"The fifth property has no corresponding diagramElement", fifthPropertyDiagramElement);
final Node fifthPropertyNode = getGmfNode(fifthPropertyDiagramElement);
assertNotNull("The fifth property has no corresponding GMF node", fifthPropertyNode);
assertTrue(
"Bag layout constraint type", fifthPropertyNode.getLayoutConstraint() instanceof Location);
final Location fifthLocation = (Location) fifthPropertyNode.getLayoutConstraint();
assertFalse(
"All the layout constraints of the ports should not be in {0,0}",
thirdLocation.getX() == 0
&& thirdLocation.getY() == 0
&& fourthLocation.getX() == 0
&& fourthLocation.getY() == 0
&& fifthLocation.getX() == 0
&& fifthLocation.getY() == 0);
assertTrue(
"All the layout constraints of the ports should be different",
thirdLocation.getX() != fourthLocation.getX()
|| thirdLocation.getY() != fourthLocation.getY());
assertTrue(
"All the layout constraints of the ports should be different",
thirdLocation.getX() != fifthLocation.getX()
|| thirdLocation.getY() != fifthLocation.getY());
assertTrue(
"All the layout constraints of the ports should be different",
fifthLocation.getX() != fourthLocation.getX()
|| fifthLocation.getY() != fourthLocation.getY());
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
}
/**
* Corresponds to ticket #1811. Check that after a creation of a diagram with ports from an
* existing diagram, the layoutConstraint of all ports is not {0, 0}.
*/
public void testPortLocationForCreationFromNavigation() {
// Get the desired package
final Model model = (Model) semanticModel;
assertNotNull("Corrupted input data", model);
// Get the diagram for the root of this model.
diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model);
// Open the editor (and refresh it)
final IEditorPart editorPart =
DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
// Set the focus to the desired package
assertTrue(
"We should have a DiagramDocumentEditor", editorPart instanceof DiagramDocumentEditor);
final DiagramDocumentEditor diagramEditor = (DiagramDocumentEditor) editorPart;
// Get the package named "SubPackage"
PackageableElement element = model.getPackagedElement("SubPackage");
assertTrue("Corrupted input data", element instanceof Package);
final Package packageSubPackage = (Package) element;
IMenuManager popupMenu = new MenuManager();
popupMenu.add(
new MenuManager(
IWorkbenchActionConstants.MB_ADDITIONS,
IWorkbenchActionConstants.MB_ADDITIONS)); // $NON-NLS-1$ //$NON-NLS-2$
popupMenu.add(new MenuManager("popup.new", "popup.new")); // $NON-NLS-1$
// Set the focus to package SubPackage
IGraphicalEditPart elementEditPart =
getEditPart(getFirstDiagramElement(diagram, packageSubPackage));
diagramEditor.getDiagramGraphicalViewer().setFocus(elementEditPart);
DNode focusedElement =
(DNode)
((GraphicalEditPart) diagramEditor.getDiagramGraphicalViewer().getFocusEditPart())
.resolveSemanticElement();
assertTrue(
"This is not the good focused element", focusedElement.getTarget() instanceof Package);
assertEquals(
"This is not the good focused element",
"SubPackage",
((Package) focusedElement.getTarget()).getName());
ContributionItemService.getInstance().contributeToPopupMenu(popupMenu, diagramEditor);
// Check the popup menu.
IMenuManager newRepresentationMenu = (IMenuManager) popupMenu.find("popup.new");
IContributionItem[] items = newRepresentationMenu.getItems();
boolean inNewRepresentationToGroup = false;
ActionContributionItem actionContribution = null;
for (int i = 0; i < items.length; i++) {
if (items[i] instanceof Separator) {
Separator sep = (Separator) items[i];
if ("createRepresentationGroup".equals(sep.getId())) {
inNewRepresentationToGroup = true;
} else {
inNewRepresentationToGroup = false;
}
}
if (inNewRepresentationToGroup && items[i] instanceof ActionContributionItem) {
assertNull("There should be only one ActionContributionItem", actionContribution);
actionContribution = (ActionContributionItem) items[i];
}
}
assertNotNull("There should be one ActionContributionItem", actionContribution);
final IAction action = actionContribution.getAction();
assertEquals("Action has not the correct text", "New diagram", action.getText());
// Disabling ui callback of diagram command factory
final Object adapter = diagramEditor.getAdapter(IDiagramCommandFactoryProvider.class);
final IDiagramCommandFactoryProvider diagramCmdFactoryProvider =
(IDiagramCommandFactoryProvider) adapter;
final IDiagramCommandFactory diagramCommandFactory =
diagramCmdFactoryProvider.getCommandFactory(session.getTransactionalEditingDomain());
diagramCommandFactory.setUserInterfaceCallBack(new NoUICallback());
action.run();
IEditorPart editor2 =
PlatformUI.getWorkbench().getActiveWorkbenchWindow().getActivePage().getActiveEditor();
assertTrue("We should have a DiagramDocumentEditor", editor2 instanceof DiagramDocumentEditor);
final DiagramDocumentEditor diagramEditor2 = (DiagramDocumentEditor) editor2;
GraphicalEditPart diagramPart = (GraphicalEditPart) diagramEditor2.getDiagramEditPart();
final DSemanticDiagram diagram2 = (DSemanticDiagram) diagramPart.resolveSemanticElement();
assertEquals(
"The opened diagram is not valid", diagram2.getTarget(), focusedElement.getTarget());
// Get the class named "SubClass1"
element = packageSubPackage.getPackagedElement("SubClass1");
assertTrue("Corrupted input data", element instanceof Class);
final Class subClass1 = (Class) element;
final Property firstProperty = subClass1.getOwnedAttribute("Prop1", subClass1);
final Property secondProperty = subClass1.getOwnedAttribute("Prop2", subClass1);
final DDiagramElement firstPropertyDiagramElement =
getFirstDiagramElement(diagram2, firstProperty);
assertNotNull(
"The first property has no corresponding diagramElement", firstPropertyDiagramElement);
final Node firstPropertyNode = getGmfNode(firstPropertyDiagramElement);
assertNotNull("The first property has no corresponding GMF node", firstPropertyNode);
assertTrue(
"Bag layout constraint type", firstPropertyNode.getLayoutConstraint() instanceof Location);
final Location firstLocation = (Location) firstPropertyNode.getLayoutConstraint();
final DDiagramElement secondPropertyDiagramElement =
getFirstDiagramElement(diagram2, secondProperty);
assertNotNull(
"The second property has no corresponding diagramElement", secondPropertyDiagramElement);
final Node secondPropertyNode = getGmfNode(secondPropertyDiagramElement);
assertNotNull("The second property has no corresponding GMF node", secondPropertyNode);
assertTrue(
"Bag layout constraint type", secondPropertyNode.getLayoutConstraint() instanceof Location);
final Location secondLocation = (Location) secondPropertyNode.getLayoutConstraint();
assertFalse(
"All the layout constraints of the ports should not be in {0,0}",
firstLocation.getX() == 0
&& firstLocation.getY() == 0
&& secondLocation.getX() == 0
&& secondLocation.getY() == 0);
assertTrue(
"All the layout constraints of the ports should be different",
firstLocation.getX() != secondLocation.getX()
|| firstLocation.getY() != secondLocation.getY());
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
DialectUIManager.INSTANCE.closeEditor(editor2, false);
TestsUtil.synchronizationWithUIThread();
}