final void test() throws Exception {
Future[] futures = new Future[nthreads];
for (int i = 0; i < nthreads; ++i) futures[i] = pool.submit(this);
barrier.await();
Thread.sleep(TIMEOUT);
boolean tooLate = false;
for (int i = 1; i < nthreads; ++i) {
if (!futures[i].cancel(true)) tooLate = true;
// Unbunch some of the cancels
if ((i & 3) == 0) Thread.sleep(1 + rng.next() % 10);
}
Object f0 = futures[0].get();
if (!tooLate) {
for (int i = 1; i < nthreads; ++i) {
if (!futures[i].isDone() || !futures[i].isCancelled())
throw new Error("Only one thread should complete");
}
} else System.out.print("(cancelled too late) ");
long endTime = System.nanoTime();
long time = endTime - timer.startTime;
if (print) {
double secs = (double) (time) / 1000000000.0;
System.out.println("\t " + secs + "s run time");
}
}
/**
* Spins/blocks until node s is matched by a fulfill operation.
*
* @param s the waiting node
* @param timed true if timed wait
* @param nanos timeout value
* @return matched node, or s if cancelled
*/
SNode awaitFulfill(SNode s, boolean timed, long nanos) {
/*
* When a node/thread is about to block, it sets its waiter
* field and then rechecks state at least one more time
* before actually parking, thus covering race vs
* fulfiller noticing that waiter is non-null so should be
* woken.
*
* When invoked by nodes that appear at the point of call
* to be at the head of the stack, calls to park are
* preceded by spins to avoid blocking when producers and
* consumers are arriving very close in time. This can
* happen enough to bother only on multiprocessors.
*
* The order of checks for returning out of main loop
* reflects fact that interrupts have precedence over
* normal returns, which have precedence over
* timeouts. (So, on timeout, one last check for match is
* done before giving up.) Except that calls from untimed
* SynchronousQueue.{poll/offer} don't check interrupts
* and don't wait at all, so are trapped in transfer
* method rather than calling awaitFulfill.
*/
long lastTime = timed ? System.nanoTime() : 0;
Thread w = Thread.currentThread();
SNode h = head;
int spins = (shouldSpin(s) ? (timed ? maxTimedSpins : maxUntimedSpins) : 0);
for (; ; ) {
if (w.isInterrupted()) s.tryCancel();
SNode m = s.match;
if (m != null) return m;
if (timed) {
long now = System.nanoTime();
nanos -= now - lastTime;
lastTime = now;
if (nanos <= 0) {
s.tryCancel();
continue;
}
}
if (spins > 0) spins = shouldSpin(s) ? (spins - 1) : 0;
else if (s.waiter == null) s.waiter = w; // establish waiter so can park next iter
else if (!timed) LockSupport.park(this);
else if (nanos > spinForTimeoutThreshold) LockSupport.parkNanos(this, nanos);
}
}
private boolean discardAvailableConnections(long timeout, TimeUnit unit)
throws InterruptedException {
long start = System.nanoTime();
boolean success = true;
for (Connection connection : connections) {
success &= connection.close(timeout - Cluster.timeSince(start, unit), unit);
open.decrementAndGet();
}
return success;
}
/**
* Spins/blocks until node s is fulfilled.
*
* @param s the waiting node
* @param e the comparison value for checking match
* @param timed true if timed wait
* @param nanos timeout value
* @return matched item, or s if cancelled
*/
Object awaitFulfill(QNode s, Object e, boolean timed, long nanos) {
/* Same idea as TransferStack.awaitFulfill */
long lastTime = timed ? System.nanoTime() : 0;
Thread w = Thread.currentThread();
int spins = ((head.next == s) ? (timed ? maxTimedSpins : maxUntimedSpins) : 0);
for (; ; ) {
if (w.isInterrupted()) s.tryCancel(e);
Object x = s.item;
if (x != e) return x;
if (timed) {
long now = System.nanoTime();
nanos -= now - lastTime;
lastTime = now;
if (nanos <= 0) {
s.tryCancel(e);
continue;
}
}
if (spins > 0) --spins;
else if (s.waiter == null) s.waiter = w;
else if (!timed) LockSupport.park(this);
else if (nanos > spinForTimeoutThreshold) LockSupport.parkNanos(this, nanos);
}
}
private Connection waitForConnection(long timeout, TimeUnit unit)
throws ConnectionException, TimeoutException {
long start = System.nanoTime();
long remaining = timeout;
do {
try {
awaitAvailableConnection(remaining, unit);
} catch (InterruptedException e) {
Thread.currentThread().interrupt();
// If we're interrupted fine, check if there is a connection available but stop waiting
// otherwise
timeout = 0; // this will make us stop the loop if we don't get a connection right away
}
if (isShutdown()) throw new ConnectionException(host.getAddress(), "Pool is shutdown");
int minInFlight = Integer.MAX_VALUE;
Connection leastBusy = null;
for (Connection connection : connections) {
int inFlight = connection.inFlight.get();
if (inFlight < minInFlight) {
minInFlight = inFlight;
leastBusy = connection;
}
}
while (true) {
int inFlight = leastBusy.inFlight.get();
if (inFlight >= Connection.MAX_STREAM_PER_CONNECTION) break;
if (leastBusy.inFlight.compareAndSet(inFlight, inFlight + 1)) return leastBusy;
}
remaining = timeout - Cluster.timeSince(start, unit);
} while (remaining > 0);
throw new TimeoutException();
}
void updateStateMachines(UPDATE_STATE_MACHINE caller)
// We've got quite the little state machine here!
{
synchronized (callbackLock) {
// ----------------------------------------------------------------------------------
// If we're calling from other than the callback (in which we *know* the port is
// ready), we need to check whether things are currently busy. We defer until
// later if they are.
if (caller == UPDATE_STATE_MACHINE.FROM_USER_WRITE) {
if (!i2cDevice.isI2cPortReady() || callbackThread == null) return;
// Optimized calling from user mode is not yet implemented
return;
}
// ----------------------------------------------------------------------------------
// Some ancillary bookkeeping
if (caller == UPDATE_STATE_MACHINE.FROM_CALLBACK) {
// Capture the current callback thread if we haven't already
if (callbackThread == null) {
callbackThread = Thread.currentThread();
callbackThreadOriginalPriority = callbackThread.getPriority();
} else
assertTrue(
!BuildConfig.DEBUG || callbackThread.getId() == Thread.currentThread().getId());
// Set the thread name to make the system more debuggable
if (0 == hardwareCycleCount)
Thread.currentThread().setName(String.format("RWLoop(%s)", i2cDevice.getDeviceName()));
// Adjust the target thread priority. Note that we only ever adjust it upwards,
// not downwards, because in reality the thread is shared by other I2C objects
// on the same controller and we don't want to fight with their understanding
// of what the priority should be.
int targetPriority = callbackThreadOriginalPriority + callbackThreadPriorityBoost;
if (callbackThread.getPriority() < targetPriority) {
try {
callbackThread.setPriority(targetPriority);
} catch (Exception e) {
/* ignore: just run as is */
}
}
// Update cycle statistics
hardwareCycleCount++;
}
// ----------------------------------------------------------------------------------
// Initialize state for managing state transition
setActionFlag = false;
queueFullWrite = false;
queueRead = false;
heartbeatRequired =
(msHeartbeatInterval > 0
&& milliseconds(timeSinceLastHeartbeat) >= msHeartbeatInterval);
enabledReadMode = false;
enabledWriteMode = false;
prevReadCacheStatus = readCacheStatus;
prevWriteCacheStatus = writeCacheStatus;
prevModeCacheStatus = modeCacheStatus;
// ----------------------------------------------------------------------------------
// Handle the state machine
if (caller == UPDATE_STATE_MACHINE.FROM_CALLBACK) {
// --------------------------------------------------------------------------
// Deal with the fact that we've completed any previous queueing operation
if (modeCacheStatus == MODE_CACHE_STATUS.QUEUED) modeCacheStatus = MODE_CACHE_STATUS.IDLE;
if (readCacheStatus == READ_CACHE_STATUS.QUEUED
|| readCacheStatus == READ_CACHE_STATUS.VALID_QUEUED) {
readCacheStatus = READ_CACHE_STATUS.QUEUE_COMPLETED;
nanoTimeReadCacheValid = System.nanoTime();
}
if (writeCacheStatus == WRITE_CACHE_STATUS.QUEUED) {
writeCacheStatus = WRITE_CACHE_STATUS.IDLE;
// Our write mode status should have been reported back to us
assertTrue(!BuildConfig.DEBUG || i2cDevice.isI2cPortInWriteMode());
}
// --------------------------------------------------------------------------
// That limits the number of states the caches can now be in
assertTrue(
!BuildConfig.DEBUG
|| (readCacheStatus == READ_CACHE_STATUS.IDLE
|| readCacheStatus == READ_CACHE_STATUS.SWITCHINGTOREADMODE
|| readCacheStatus == READ_CACHE_STATUS.VALID_ONLYONCE
|| readCacheStatus == READ_CACHE_STATUS.QUEUE_COMPLETED));
assertTrue(
!BuildConfig.DEBUG
|| (writeCacheStatus == WRITE_CACHE_STATUS.IDLE
|| writeCacheStatus == WRITE_CACHE_STATUS.DIRTY));
// --------------------------------------------------------------------------
// Complete any read mode switch if there is one
if (readCacheStatus == READ_CACHE_STATUS.SWITCHINGTOREADMODE) {
// We're trying to switch into read mode. Are we there yet?
if (i2cDevice.isI2cPortInReadMode()) {
// See also below XYZZY
readCacheStatus = READ_CACHE_STATUS.QUEUED;
setActionFlag = true; // actually do an I2C read
queueRead = true; // read the I2C read results
} else {
queueRead = true; // read the mode byte
}
}
// --------------------------------------------------------------------------
// If there's a write request pending, and it's ok to issue the write, do so
else if (writeCacheStatus == WRITE_CACHE_STATUS.DIRTY) {
issueWrite();
// Our ordering rules are that any reads after a write have to wait until
// the write is actually sent to the hardware, so anything we've read before is junk.
// Note that there's an analogous check in read().
readCacheStatus = READ_CACHE_STATUS.IDLE;
}
// --------------------------------------------------------------------------
// Initiate reading if we should. Be sure to honor the policy of the read mode
else if (readCacheStatus == READ_CACHE_STATUS.IDLE || readWindowChanged) {
if (readWindow != null && readWindow.isOkToRead()) {
// We're going to read from this window. If it's an only-once, then
// ensure we don't come down this path again with the same ReadWindow instance.
readWindow.setReadIssued();
// You know...we might *already* have set up the controller to read what we want.
// Maybe the previous read was a one-shot, for example.
if (readWindowSentToController != null
&& readWindowSentToController.contains(readWindow)
&& i2cDevice.isI2cPortInReadMode()) {
// Lucky us! We can go ahead and queue the read right now!
// See also above XYZZY
readWindowActuallyRead = readWindowSentToController;
readCacheStatus = READ_CACHE_STATUS.QUEUED;
setActionFlag = true; // actually do an I2C read
queueRead = true; // read the results of the read
} else {
// We'll start switching now, and queue the read later
readWindowActuallyRead = readWindow;
startSwitchingToReadMode(readWindow);
}
} else {
// There's nothing to read. Make *sure* we are idle.
readCacheStatus = READ_CACHE_STATUS.IDLE;
}
readWindowChanged = false;
}
// --------------------------------------------------------------------------
// Reissue any previous read if we should. The only way we are here and
// see READ_CACHE_STATUS.QUEUE_COMPLETED is if we completed a queuing operation
// above.
else if (readCacheStatus == READ_CACHE_STATUS.QUEUE_COMPLETED) {
if (readWindow != null && readWindow.isOkToRead()) {
readCacheStatus = READ_CACHE_STATUS.VALID_QUEUED;
setActionFlag = true; // actually do an I2C read
queueRead = true; // read the results of the read
} else {
readCacheStatus = READ_CACHE_STATUS.VALID_ONLYONCE;
}
}
// --------------------------------------------------------------------------
// Completing the possibilities:
else if (readCacheStatus == READ_CACHE_STATUS.VALID_ONLYONCE) {
// Just leave it there until someone reads it
}
// ----------------------------------------------------------------------------------
// Ok, after all that we finally know what how we're required to
// interact with the device controller according to what we've been
// asked to read or write. But what, now, about heartbeats?
if (!setActionFlag && heartbeatRequired) {
if (heartbeatAction != null) {
if (readWindowSentToController != null && heartbeatAction.rereadLastRead) {
// Controller is in or is switching to read mode. If he's there
// yet, then issue an I2C read; if he's not, then he soon will be.
if (i2cDevice.isI2cPortInReadMode()) {
setActionFlag = true; // issue an I2C read
} else {
assertTrue(
!BuildConfig.DEBUG
|| readCacheStatus == READ_CACHE_STATUS.SWITCHINGTOREADMODE);
}
} else if (readWindowSentToControllerInitialized
&& readWindowSentToController == null
&& heartbeatAction.rewriteLastWritten) {
// Controller is in write mode, and the write cache has what we last wrote
queueFullWrite = true;
setActionFlag = true; // issue an I2C write
} else if (heartbeatAction.heartbeatReadWindow != null) {
// The simplest way to do this is just to do a new read from the outside, as that
// means it has literally zero impact here on our state machine. That unfortunately
// introduces concurrency where otherwise none might exist, but that's ONLY if you
// choose this flavor of heartbeat, so that's a reasonable tradeoff.
final ReadWindow window =
heartbeatAction
.heartbeatReadWindow; // capture here while we still have the lock
Thread thread =
new Thread(
new Runnable() {
@Override
public void run() {
try {
I2cDeviceClient.this.read(window.getIregFirst(), window.getCreg());
} catch (Exception e) // paranoia
{
// ignored
}
}
});
// Start the thread a-going. It will run relatively quickly and then shut down
thread.setName("I2C heartbeat read thread");
thread.setPriority(heartbeatAction.explicitReadPriority);
thread.start();
}
}
}
if (setActionFlag) {
// We're about to communicate on I2C right now, so reset the heartbeat.
// Note that we reset() *before* we talk to the device so as to do
// conservative timing accounting.
timeSinceLastHeartbeat.reset();
}
} else if (caller == UPDATE_STATE_MACHINE.FROM_USER_WRITE) {
// There's nothing we know to do that would speed things up, so we
// just do nothing here and wait until the next portIsReady() callback.
}
// ----------------------------------------------------------------------------------
// Read, set action flag and / or queue to module as requested
if (setActionFlag) i2cDevice.setI2cPortActionFlag();
else clearActionFlag();
if (setActionFlag && !queueFullWrite) {
i2cDevice.writeI2cPortFlagOnlyToController();
} else if (queueFullWrite) {
i2cDevice.writeI2cCacheToController();
//
if (modeCacheStatus == MODE_CACHE_STATUS.DIRTY)
modeCacheStatus = MODE_CACHE_STATUS.QUEUED;
}
// Queue a read after queuing any write for a bit of paranoia: if we're mode switching
// to write, we want that write to go out first, THEN read the mode status. It probably
// would anyway, but why not...
if (queueRead) {
i2cDevice.readI2cCacheFromController();
}
// ----------------------------------------------------------------------------------
// Do logging
if (loggingEnabled) {
StringBuilder message = new StringBuilder();
switch (caller) {
case FROM_CALLBACK:
message.append(String.format("cyc %d", hardwareCycleCount));
break;
case FROM_USER_WRITE:
message.append(String.format("usr write"));
break;
}
if (setActionFlag) message.append("|flag");
if (setActionFlag && !queueFullWrite) message.append("|f");
else if (queueFullWrite) message.append("|w");
else message.append("|.");
if (queueRead) message.append("|r");
if (readCacheStatus != prevReadCacheStatus)
message.append(
"| R." + prevReadCacheStatus.toString() + "->" + readCacheStatus.toString());
if (writeCacheStatus != prevWriteCacheStatus)
message.append(
"| W." + prevWriteCacheStatus.toString() + "->" + writeCacheStatus.toString());
// if (modeCacheStatus != prevModeCacheStatus) message.append("| M." +
// prevModeCacheStatus.toString() + "->" + modeCacheStatus.toString());
if (enabledWriteMode)
message.append(String.format("| setWrite(0x%02x,%d)", iregWriteFirst, cregWrite));
if (enabledReadMode)
message.append(
String.format(
"| setRead(0x%02x,%d)", readWindow.getIregFirst(), readWindow.getCreg()));
log(Log.DEBUG, message.toString());
}
// ----------------------------------------------------------------------------------
// Notify anyone blocked in read() or write()
callbackLock.notifyAll();
}
}
