public void run(String arg) {
imp = WindowManager.getCurrentImage();
if (arg.equals("add")) {
addToRoiManager(imp);
return;
}
if (imp == null) {
IJ.noImage();
return;
}
if (arg.equals("all")) imp.setRoi(0, 0, imp.getWidth(), imp.getHeight());
else if (arg.equals("none")) imp.killRoi();
else if (arg.equals("restore")) imp.restoreRoi();
else if (arg.equals("spline")) fitSpline();
else if (arg.equals("circle")) fitCircle(imp);
else if (arg.equals("ellipse")) createEllipse(imp);
else if (arg.equals("hull")) convexHull(imp);
else if (arg.equals("mask")) createMask(imp);
else if (arg.equals("from")) createSelectionFromMask(imp);
else if (arg.equals("inverse")) invert(imp);
else if (arg.equals("toarea")) lineToArea(imp);
else if (arg.equals("toline")) areaToLine(imp);
else if (arg.equals("properties")) {
setProperties("Properties ", imp.getRoi());
imp.draw();
} else if (arg.equals("band")) makeBand(imp);
else if (arg.equals("tobox")) toBoundingBox(imp);
else runMacro(arg);
}
void createEllipse(ImagePlus imp) {
IJ.showStatus("Fitting ellipse");
Roi roi = imp.getRoi();
if (roi == null) {
noRoi("Fit Ellipse");
return;
}
if (roi.isLine()) {
IJ.error("Fit Ellipse", "\"Fit Ellipse\" does not work with line selections");
return;
}
ImageProcessor ip = imp.getProcessor();
ip.setRoi(roi);
int options = Measurements.CENTROID + Measurements.ELLIPSE;
ImageStatistics stats = ImageStatistics.getStatistics(ip, options, null);
double dx = stats.major * Math.cos(stats.angle / 180.0 * Math.PI) / 2.0;
double dy = -stats.major * Math.sin(stats.angle / 180.0 * Math.PI) / 2.0;
double x1 = stats.xCentroid - dx;
double x2 = stats.xCentroid + dx;
double y1 = stats.yCentroid - dy;
double y2 = stats.yCentroid + dy;
double aspectRatio = stats.minor / stats.major;
imp.killRoi();
imp.setRoi(new EllipseRoi(x1, y1, x2, y2, aspectRatio));
}
void scale(ImageProcessor ip) {
if (newWindow) {
Rectangle r = ip.getRoi();
ImagePlus imp2 = imp.createImagePlus();
imp2.setProcessor(title, ip.resize(newWidth, newHeight));
Calibration cal = imp2.getCalibration();
if (cal.scaled()) {
cal.pixelWidth *= 1.0 / xscale;
cal.pixelHeight *= 1.0 / yscale;
}
imp2.show();
imp.trimProcessor();
imp2.trimProcessor();
imp2.changes = true;
} else {
if (processStack && imp.getStackSize() > 1) {
Undo.reset();
StackProcessor sp = new StackProcessor(imp.getStack(), ip);
sp.scale(xscale, yscale, bgValue);
} else {
ip.snapshot();
Undo.setup(Undo.FILTER, imp);
ip.setSnapshotCopyMode(true);
ip.scale(xscale, yscale);
ip.setSnapshotCopyMode(false);
}
imp.killRoi();
imp.updateAndDraw();
imp.changes = true;
}
}
void toBoundingBox(ImagePlus imp) {
Roi roi = imp.getRoi();
if (roi == null) {
noRoi("To Bounding Box");
return;
}
Rectangle r = roi.getBounds();
imp.killRoi();
imp.setRoi(new Roi(r.x, r.y, r.width, r.height));
}
void addSelection() {
ImagePlus imp = IJ.getImage();
String macroOptions = Macro.getOptions();
if (macroOptions != null && IJ.macroRunning() && macroOptions.indexOf("remove") != -1) {
imp.setOverlay(null);
return;
}
Roi roi = imp.getRoi();
if (roi == null && imp.getOverlay() != null) {
GenericDialog gd = new GenericDialog("No Selection");
gd.addMessage("\"Overlay>Add\" requires a selection.");
gd.setInsets(15, 40, 0);
gd.addCheckbox("Remove existing overlay", false);
gd.showDialog();
if (gd.wasCanceled()) return;
if (gd.getNextBoolean()) imp.setOverlay(null);
return;
}
if (roi == null) {
IJ.error("This command requires a selection.");
return;
}
roi = (Roi) roi.clone();
if (roi.getStrokeColor() == null) roi.setStrokeColor(Toolbar.getForegroundColor());
int width = Line.getWidth();
Rectangle bounds = roi.getBounds();
boolean tooWide = width > Math.max(bounds.width, bounds.height) / 3.0;
if (roi.getStroke() == null && width > 1 && !tooWide) roi.setStrokeWidth(Line.getWidth());
Overlay overlay = imp.getOverlay();
if (overlay != null && overlay.size() > 0 && !roi.isDrawingTool()) {
Roi roi2 = overlay.get(overlay.size() - 1);
if (roi.getStroke() == null) roi.setStrokeWidth(roi2.getStrokeWidth());
if (roi.getFillColor() == null) roi.setFillColor(roi2.getFillColor());
}
boolean points = roi instanceof PointRoi && ((PolygonRoi) roi).getNCoordinates() > 1;
if (points) roi.setStrokeColor(Color.red);
if (!IJ.altKeyDown() && !(roi instanceof Arrow)) {
RoiProperties rp = new RoiProperties("Add to Overlay", roi);
if (!rp.showDialog()) return;
}
String name = roi.getName();
boolean newOverlay = name != null && name.equals("new-overlay");
if (overlay == null || newOverlay) overlay = new Overlay();
overlay.add(roi);
imp.setOverlay(overlay);
overlay2 = overlay;
if (points || (roi instanceof ImageRoi) || (roi instanceof Arrow)) imp.killRoi();
Undo.setup(Undo.OVERLAY_ADDITION, imp);
}
public void run(String arg) {
imp = IJ.getImage();
Roi roi = imp.getRoi();
if (roi != null && !roi.isArea()) imp.killRoi(); // ignore any line selection
ImageProcessor ip = imp.getProcessor();
if (!showDialog(ip)) return;
if (ip.getWidth() > 1 && ip.getHeight() > 1) ip.setInterpolate(interpolate);
else ip.setInterpolate(false);
ip.setBackgroundValue(bgValue);
imp.startTiming();
try {
if (newWindow && imp.getStackSize() > 1 && processStack) createNewStack(imp, ip);
else scale(ip);
} catch (OutOfMemoryError o) {
IJ.outOfMemory("Scale");
}
IJ.showProgress(1.0);
}
void fromRoiManager() {
ImagePlus imp = IJ.getImage();
RoiManager rm = RoiManager.getInstance();
if (rm == null) {
IJ.error("ROI Manager is not open");
return;
}
Roi[] rois = rm.getRoisAsArray();
if (rois.length == 0) {
IJ.error("ROI Manager is empty");
return;
}
Overlay overlay = new Overlay();
for (int i = 0; i < rois.length; i++) overlay.add((Roi) rois[i].clone());
imp.setOverlay(overlay);
ImageCanvas ic = imp.getCanvas();
if (ic != null) ic.setShowAllROIs(false);
rm.setEditMode(imp, false);
imp.killRoi();
}
/*
if selection is closed shape, create a circle with the same area and centroid, otherwise use<br>
the Pratt method to fit a circle to the points that define the line or multi-point selection.<br>
Reference: Pratt V., Direct least-squares fitting of algebraic surfaces", Computer Graphics, Vol. 21, pages 145-152 (1987).<br>
Original code: Nikolai Chernov's MATLAB script for Newton-based Pratt fit.<br>
(http://www.math.uab.edu/~chernov/cl/MATLABcircle.html)<br>
Java version: https://github.com/mdoube/BoneJ/blob/master/src/org/doube/geometry/FitCircle.java<br>
@authors Nikolai Chernov, Michael Doube, Ved Sharma
*/
void fitCircle(ImagePlus imp) {
Roi roi = imp.getRoi();
if (roi == null) {
noRoi("Fit Circle");
return;
}
if (roi.isArea()) { // create circle with the same area and centroid
ImageProcessor ip = imp.getProcessor();
ip.setRoi(roi);
ImageStatistics stats =
ImageStatistics.getStatistics(ip, Measurements.AREA + Measurements.CENTROID, null);
double r = Math.sqrt(stats.pixelCount / Math.PI);
imp.killRoi();
int d = (int) Math.round(2.0 * r);
IJ.makeOval(
(int) Math.round(stats.xCentroid - r), (int) Math.round(stats.yCentroid - r), d, d);
return;
}
Polygon poly = roi.getPolygon();
int n = poly.npoints;
int[] x = poly.xpoints;
int[] y = poly.ypoints;
if (n < 3) {
IJ.error("Fit Circle", "At least 3 points are required to fit a circle.");
return;
}
// calculate point centroid
double sumx = 0, sumy = 0;
for (int i = 0; i < n; i++) {
sumx = sumx + poly.xpoints[i];
sumy = sumy + poly.ypoints[i];
}
double meanx = sumx / n;
double meany = sumy / n;
// calculate moments
double[] X = new double[n], Y = new double[n];
double Mxx = 0, Myy = 0, Mxy = 0, Mxz = 0, Myz = 0, Mzz = 0;
for (int i = 0; i < n; i++) {
X[i] = x[i] - meanx;
Y[i] = y[i] - meany;
double Zi = X[i] * X[i] + Y[i] * Y[i];
Mxy = Mxy + X[i] * Y[i];
Mxx = Mxx + X[i] * X[i];
Myy = Myy + Y[i] * Y[i];
Mxz = Mxz + X[i] * Zi;
Myz = Myz + Y[i] * Zi;
Mzz = Mzz + Zi * Zi;
}
Mxx = Mxx / n;
Myy = Myy / n;
Mxy = Mxy / n;
Mxz = Mxz / n;
Myz = Myz / n;
Mzz = Mzz / n;
// calculate the coefficients of the characteristic polynomial
double Mz = Mxx + Myy;
double Cov_xy = Mxx * Myy - Mxy * Mxy;
double Mxz2 = Mxz * Mxz;
double Myz2 = Myz * Myz;
double A2 = 4 * Cov_xy - 3 * Mz * Mz - Mzz;
double A1 = Mzz * Mz + 4 * Cov_xy * Mz - Mxz2 - Myz2 - Mz * Mz * Mz;
double A0 = Mxz2 * Myy + Myz2 * Mxx - Mzz * Cov_xy - 2 * Mxz * Myz * Mxy + Mz * Mz * Cov_xy;
double A22 = A2 + A2;
double epsilon = 1e-12;
double ynew = 1e+20;
int IterMax = 20;
double xnew = 0;
int iterations = 0;
// Newton's method starting at x=0
for (int iter = 1; iter <= IterMax; iter++) {
iterations = iter;
double yold = ynew;
ynew = A0 + xnew * (A1 + xnew * (A2 + 4. * xnew * xnew));
if (Math.abs(ynew) > Math.abs(yold)) {
if (IJ.debugMode) IJ.log("Fit Circle: wrong direction: |ynew| > |yold|");
xnew = 0;
break;
}
double Dy = A1 + xnew * (A22 + 16 * xnew * xnew);
double xold = xnew;
xnew = xold - ynew / Dy;
if (Math.abs((xnew - xold) / xnew) < epsilon) break;
if (iter >= IterMax) {
if (IJ.debugMode) IJ.log("Fit Circle: will not converge");
xnew = 0;
}
if (xnew < 0) {
if (IJ.debugMode) IJ.log("Fit Circle: negative root: x = " + xnew);
xnew = 0;
}
}
if (IJ.debugMode)
IJ.log("Fit Circle: n=" + n + ", xnew=" + IJ.d2s(xnew, 2) + ", iterations=" + iterations);
// calculate the circle parameters
double DET = xnew * xnew - xnew * Mz + Cov_xy;
double CenterX = (Mxz * (Myy - xnew) - Myz * Mxy) / (2 * DET);
double CenterY = (Myz * (Mxx - xnew) - Mxz * Mxy) / (2 * DET);
double radius = Math.sqrt(CenterX * CenterX + CenterY * CenterY + Mz + 2 * xnew);
if (Double.isNaN(radius)) {
IJ.error("Fit Circle", "Points are collinear.");
return;
}
CenterX = CenterX + meanx;
CenterY = CenterY + meany;
imp.killRoi();
IJ.makeOval(
(int) Math.round(CenterX - radius),
(int) Math.round(CenterY - radius),
(int) Math.round(2 * radius),
(int) Math.round(2 * radius));
}
public void run(ImageProcessor ip) {
String[] imageNames = getOpenImageNames();
if (imageNames[0] == "None") {
IJ.error("need at least 2 binary open images");
return;
}
double previousMinOverlap = Prefs.get("BVTB.BinaryFeatureExtractor.minOverlap", 0);
boolean previousCombine = Prefs.get("BVTB.BinaryFeatureExtractor.combine", false);
GenericDialog gd = new GenericDialog("Binary Feature Extractor");
gd.addChoice("Objects image", imageNames, imageNames[0]);
gd.addChoice("Selector image", imageNames, imageNames[1]);
gd.addNumericField("Object_overlap in % (0=off)", previousMinOverlap, 0, 9, "");
gd.addCheckbox("Combine objects and selectors", previousCombine);
gd.addCheckbox("Count output", true);
gd.addCheckbox("Analysis tables", false);
gd.showDialog();
if (gd.wasCanceled()) {
return;
}
String objectsImgTitle = gd.getNextChoice();
String selectorsImgTitle = gd.getNextChoice();
double minOverlap = gd.getNextNumber();
boolean combineImages = gd.getNextBoolean();
boolean showCountOutput = gd.getNextBoolean();
boolean showAnalysis = gd.getNextBoolean();
if (gd.invalidNumber() || minOverlap < 0 || minOverlap > 100) {
IJ.error("invalid number");
return;
}
Prefs.set("BVTB.BinaryFeatureExtractor.minOverlap", minOverlap);
Prefs.set("BVTB.BinaryFeatureExtractor.combine", combineImages);
if (objectsImgTitle.equals(selectorsImgTitle)) {
IJ.error("images need to be different");
return;
}
ImagePlus objectsImp = WindowManager.getImage(objectsImgTitle);
ImageProcessor objectsIP = objectsImp.getProcessor();
ImagePlus selectorsImp = WindowManager.getImage(selectorsImgTitle);
ImageProcessor selectorsIP = selectorsImp.getProcessor();
if (!objectsIP.isBinary() || !selectorsIP.isBinary()) {
IJ.error("works with 8-bit binary images only");
return;
}
if ((objectsImp.getWidth() != selectorsImp.getWidth())
|| objectsImp.getHeight() != selectorsImp.getHeight()) {
IJ.error("images need to be of the same size");
return;
}
// close any existing RoiManager before instantiating a new one for this analysis
RoiManager oldRM = RoiManager.getInstance2();
if (oldRM != null) {
oldRM.close();
}
RoiManager objectsRM = new RoiManager(true);
ResultsTable objectsRT = new ResultsTable();
ParticleAnalyzer analyzeObjects =
new ParticleAnalyzer(analyzerOptions, measurementFlags, objectsRT, 0.0, 999999999.9);
analyzeObjects.setRoiManager(objectsRM);
analyzeObjects.analyze(objectsImp);
objectsRM.runCommand("Show None");
int objectNumber = objectsRT.getCounter();
Roi[] objectRoi = objectsRM.getRoisAsArray();
ResultsTable measureSelectorsRT = new ResultsTable();
Analyzer overlapAnalyzer = new Analyzer(selectorsImp, measurementFlags, measureSelectorsRT);
ImagePlus outputImp =
IJ.createImage("output", "8-bit black", objectsImp.getWidth(), objectsImp.getHeight(), 1);
ImageProcessor outputIP = outputImp.getProcessor();
double[] measuredOverlap = new double[objectNumber];
outputIP.setValue(255.0);
for (int o = 0; o < objectNumber; o++) {
selectorsImp.killRoi();
selectorsImp.setRoi(objectRoi[o]);
overlapAnalyzer.measure();
measuredOverlap[o] = measureSelectorsRT.getValue("%Area", o);
if (minOverlap != 0.0 && measuredOverlap[o] >= minOverlap) {
outputIP.fill(objectRoi[o]);
finalCount++;
} else if (minOverlap == 0.0 && measuredOverlap[o] > 0.0) {
outputIP.fill(objectRoi[o]);
finalCount++;
}
}
// measureSelectorsRT.show("Objects");
selectorsImp.killRoi();
RoiManager selectorRM = new RoiManager(true);
ResultsTable selectorRT = new ResultsTable();
ParticleAnalyzer.setRoiManager(selectorRM);
ParticleAnalyzer analyzeSelectors =
new ParticleAnalyzer(analyzerOptions, measurementFlags, selectorRT, 0.0, 999999999.9);
analyzeSelectors.analyze(selectorsImp);
selectorRM.runCommand("Show None");
int selectorNumber = selectorRT.getCounter();
if (combineImages) {
outputImp.updateAndDraw();
Roi[] selectorRoi = selectorRM.getRoisAsArray();
ResultsTable measureObjectsRT = new ResultsTable();
Analyzer selectorAnalyzer = new Analyzer(outputImp, measurementFlags, measureObjectsRT);
double[] selectorOverlap = new double[selectorNumber];
outputIP.setValue(255.0);
for (int s = 0; s < selectorNumber; s++) {
outputImp.killRoi();
outputImp.setRoi(selectorRoi[s]);
selectorAnalyzer.measure();
selectorOverlap[s] = measureObjectsRT.getValue("%Area", s);
if (selectorOverlap[s] > 0.0d) {
outputIP.fill(selectorRoi[s]);
}
}
selectorRoi = null;
selectorAnalyzer = null;
measureObjectsRT = null;
}
// selectorRT.show("Selectors");
outputImp.killRoi();
String outputImageTitle = WindowManager.getUniqueName("Extracted_" + objectsImgTitle);
outputImp.setTitle(outputImageTitle);
outputImp.show();
outputImp.changes = true;
if (showCountOutput) {
String[] openTextWindows = WindowManager.getNonImageTitles();
boolean makeNewTable = true;
for (int w = 0; w < openTextWindows.length; w++) {
if (openTextWindows[w].equals("BFE_Results")) {
makeNewTable = false;
}
}
TextWindow existingCountTable = ResultsTable.getResultsWindow();
if (makeNewTable) {
countTable = new ResultsTable();
countTable.setPrecision(0);
countTable.setValue("Image", 0, outputImageTitle);
countTable.setValue("Objects", 0, objectNumber);
countTable.setValue("Selectors", 0, selectorNumber);
countTable.setValue("Extracted", 0, finalCount);
countTable.show("BFE_Results");
} else {
IJ.renameResults("BFE_Results", "Results");
countTable = ResultsTable.getResultsTable();
countTable.setPrecision(0);
countTable.incrementCounter();
countTable.addValue("Image", outputImageTitle);
countTable.addValue("Objects", objectNumber);
countTable.addValue("Selectors", selectorNumber);
countTable.addValue("Extracted", finalCount);
IJ.renameResults("Results", "BFE_Results");
countTable.show("BFE_Results");
}
}
if (showAnalysis) {
ResultsTable extractedRT = new ResultsTable();
ParticleAnalyzer analyzeExtracted =
new ParticleAnalyzer(
ParticleAnalyzer.CLEAR_WORKSHEET | ParticleAnalyzer.RECORD_STARTS,
measurementFlags,
extractedRT,
0.0,
999999999.9);
analyzeExtracted.analyze(outputImp);
objectsRT.show("Objects");
selectorRT.show("Selectors");
extractedRT.show("Extracted");
} else {
objectsRT = null;
selectorRT = null;
}
objectsRM = null;
measureSelectorsRT = null;
analyzeObjects = null;
overlapAnalyzer = null;
objectRoi = null;
selectorRM = null;
objectsImp.killRoi();
objectsImp.changes = false;
selectorsImp.changes = false;
}
/**
* Performs particle analysis on the specified ImagePlus and ImageProcessor. Returns false if
* there is an error.
*/
public boolean analyze(ImagePlus imp, ImageProcessor ip) {
if (this.imp == null) this.imp = imp;
showResults = (options & SHOW_RESULTS) != 0;
excludeEdgeParticles = (options & EXCLUDE_EDGE_PARTICLES) != 0;
resetCounter = (options & CLEAR_WORKSHEET) != 0;
showProgress = (options & SHOW_PROGRESS) != 0;
floodFill = (options & INCLUDE_HOLES) == 0;
recordStarts = (options & RECORD_STARTS) != 0;
addToManager = (options & ADD_TO_MANAGER) != 0;
displaySummary = (options & DISPLAY_SUMMARY) != 0;
inSituShow = (options & IN_SITU_SHOW) != 0;
outputImage = null;
ip.snapshot();
ip.setProgressBar(null);
if (Analyzer.isRedirectImage()) {
redirectImp = Analyzer.getRedirectImage(imp);
if (redirectImp == null) return false;
int depth = redirectImp.getStackSize();
if (depth > 1 && depth == imp.getStackSize()) {
ImageStack redirectStack = redirectImp.getStack();
redirectIP = redirectStack.getProcessor(imp.getCurrentSlice());
} else redirectIP = redirectImp.getProcessor();
} else if (imp.getType() == ImagePlus.COLOR_RGB) {
ImagePlus original = (ImagePlus) imp.getProperty("OriginalImage");
if (original != null
&& original.getWidth() == imp.getWidth()
&& original.getHeight() == imp.getHeight()) {
redirectImp = original;
redirectIP = original.getProcessor();
}
}
if (!setThresholdLevels(imp, ip)) return false;
width = ip.getWidth();
height = ip.getHeight();
if (!(showChoice == NOTHING || showChoice == OVERLAY_OUTLINES || showChoice == OVERLAY_MASKS)) {
blackBackground = Prefs.blackBackground && inSituShow;
if (slice == 1) outlines = new ImageStack(width, height);
if (showChoice == ROI_MASKS) drawIP = new ShortProcessor(width, height);
else drawIP = new ByteProcessor(width, height);
drawIP.setLineWidth(lineWidth);
if (showChoice == ROI_MASKS) {
} // Place holder for now...
else if (showChoice == MASKS && !blackBackground) drawIP.invertLut();
else if (showChoice == OUTLINES) {
if (!inSituShow) {
if (customLut == null) makeCustomLut();
drawIP.setColorModel(customLut);
}
drawIP.setFont(new Font("SansSerif", Font.PLAIN, fontSize));
if (fontSize > 12 && inSituShow) drawIP.setAntialiasedText(true);
}
outlines.addSlice(null, drawIP);
if (showChoice == ROI_MASKS || blackBackground) {
drawIP.setColor(Color.black);
drawIP.fill();
drawIP.setColor(Color.white);
} else {
drawIP.setColor(Color.white);
drawIP.fill();
drawIP.setColor(Color.black);
}
}
calibration = redirectImp != null ? redirectImp.getCalibration() : imp.getCalibration();
if (rt == null) {
rt = Analyzer.getResultsTable();
analyzer = new Analyzer(imp);
} else analyzer = new Analyzer(imp, measurements, rt);
if (resetCounter && slice == 1) {
if (!Analyzer.resetCounter()) return false;
}
beginningCount = Analyzer.getCounter();
byte[] pixels = null;
if (ip instanceof ByteProcessor) pixels = (byte[]) ip.getPixels();
if (r == null) {
r = ip.getRoi();
mask = ip.getMask();
if (displaySummary) {
if (mask != null) totalArea = ImageStatistics.getStatistics(ip, AREA, calibration).area;
else totalArea = r.width * calibration.pixelWidth * r.height * calibration.pixelHeight;
}
}
minX = r.x;
maxX = r.x + r.width;
minY = r.y;
maxY = r.y + r.height;
if (r.width < width || r.height < height || mask != null) {
if (!eraseOutsideRoi(ip, r, mask)) return false;
}
int offset;
double value;
int inc = Math.max(r.height / 25, 1);
int mi = 0;
ImageWindow win = imp.getWindow();
if (win != null) win.running = true;
if (measurements == 0) measurements = Analyzer.getMeasurements();
if (showChoice == ELLIPSES) measurements |= ELLIPSE;
measurements &= ~LIMIT; // ignore "Limit to Threshold"
roiNeedsImage =
(measurements & PERIMETER) != 0
|| (measurements & SHAPE_DESCRIPTORS) != 0
|| (measurements & FERET) != 0;
particleCount = 0;
wand = new Wand(ip);
pf = new PolygonFiller();
if (floodFill) {
ImageProcessor ipf = ip.duplicate();
ipf.setValue(fillColor);
ff = new FloodFiller(ipf);
}
roiType = Wand.allPoints() ? Roi.FREEROI : Roi.TRACED_ROI;
for (int y = r.y; y < (r.y + r.height); y++) {
offset = y * width;
for (int x = r.x; x < (r.x + r.width); x++) {
if (pixels != null) value = pixels[offset + x] & 255;
else if (imageType == SHORT) value = ip.getPixel(x, y);
else value = ip.getPixelValue(x, y);
if (value >= level1 && value <= level2) analyzeParticle(x, y, imp, ip);
}
if (showProgress && ((y % inc) == 0)) IJ.showProgress((double) (y - r.y) / r.height);
if (win != null) canceled = !win.running;
if (canceled) {
Macro.abort();
break;
}
}
if (showProgress) IJ.showProgress(1.0);
if (showResults) rt.updateResults();
imp.killRoi();
ip.resetRoi();
ip.reset();
if (displaySummary && IJ.getInstance() != null) updateSliceSummary();
if (addToManager && roiManager != null) roiManager.setEditMode(imp, true);
maxParticleCount = (particleCount > maxParticleCount) ? particleCount : maxParticleCount;
totalCount += particleCount;
if (!canceled) showResults();
return true;
}
void toBoundingBox(ImagePlus imp) {
Roi roi = imp.getRoi();
Rectangle r = roi.getBounds();
imp.killRoi();
imp.setRoi(new Roi(r.x, r.y, r.width, r.height));
}