@Override
public void run() {
setName("ConnectThread");
Looper.prepare();
// Always cancel discovery because it will slow down a connection
mAdapter.cancelDiscovery();
// Make a connection to the BluetoothSocket
try {
// This is a blocking call and will only return on a
// successful connection or an exception
mmSocket.connect();
} catch (IOException e) {
// connection failure
connectionFailed(0, 1);
// Close the socket
try {
mmSocket.close();
} catch (IOException e2) {
Log.e(TAG, "unable to close() socket during connection failure", e2);
}
// Start the service over to restart listening mode
Log.d(TAG, "originally resetting start()?");
setState(STATE_LISTEN);
BluetoothService.this.start();
return;
}
int answer = 0; // 0: no , 1: yes for permission from a friend
// Reset the ConnectThread because we're done
// wait for the message from a friend
synchronized (BluetoothService.this) {
mConnectThread = null;
try {
InputStream mmInStream = mmSocket.getInputStream();
answer = mmInStream.read();
} catch (IOException e) {
e.printStackTrace();
}
Log.d(TAG, "reading answer: " + answer);
// Start the connected thread
if (answer == 1) {
boolean myturn = mHandler.toggleMyTurn();
if (!myturn) {
Log.e(TAG, "error handling game turn...");
}
connected(mmSocket, mmDevice);
} else {
try {
mmSocket.close();
} catch (IOException e) {
Log.e(TAG, "close() of connect socket failed", e);
}
connectionFailed(1, 1);
}
}
Looper.loop();
}
public void connecked() {
_device = _bluetooth.getRemoteDevice(address);
try {
if ((_socket != null)) {
is.close();
_socket.close();
_socket = null;
}
_socket = _device.createRfcommSocketToServiceRecord(UUID.fromString(MY_UUID));
Log.v("address1:" + address, "address1" + address);
} catch (IOException e) {
Log.v("addressA:" + address, "addressA" + address);
Toast.makeText(this, getResources().getString(R.string.failcon), Toast.LENGTH_SHORT).show();
}
try {
_socket.connect();
Log.v("address2:" + address, "address2:" + address);
Toast.makeText(
this,
getResources().getString(R.string.con)
+ _device.getName()
+ getResources().getString(R.string.suc),
Toast.LENGTH_SHORT)
.show();
// btn.setText("断开");
} catch (IOException e) {
try {
Log.v("addressB:" + address, "addressB" + address);
Toast.makeText(this, getResources().getString(R.string.failcon), Toast.LENGTH_SHORT).show();
_socket.close();
_socket = null;
} catch (IOException ee) {
Log.v("addressC:" + address, "addressC" + address);
Toast.makeText(this, getResources().getString(R.string.failcon), Toast.LENGTH_SHORT).show();
}
return;
}
try {
Log.v("address3:" + address, "address3:" + address);
is = _socket.getInputStream(); // 得到蓝牙数据输入流
Log.v("address4:" + address, "address4:" + address);
Intent intent = new Intent(this, ControlActivity.class);
startActivity(intent);
} catch (IOException e) {
Toast.makeText(this, getResources().getString(R.string.rcdafail), Toast.LENGTH_SHORT).show();
return;
}
}
@Override
public void run() {
onBeforeConnect(mDevice);
try {
mLogger.debug("BluetoothService$ConnectingThread.run: opening socket");
mSocket = mDevice.createRfcommSocketToServiceRecord(SPP_UUID);
} catch (IOException e) {
mLogger.error(
"BluetoothService$ConnectingThread.run: caught IOException when creating socket", e);
onConnectionFailed(mDevice);
return;
}
try {
mLogger.debug("BluetoothService$ConnectingThread.run: connecting to device");
mSocket.connect();
mLogger.debug("BluetoothService$ConnectingThread.run: connected successfully");
onConnected(mSocket);
} catch (IOException e) {
mLogger.error(
"BluetoothService$ConnectingThread.run: caught IOException when connecting to "
+ "socket",
e);
try {
mSocket.close();
} catch (IOException e2) {
mLogger.error(
"BluetoothService$ConnectingThread.run: caught IOException when closing " + "socket",
e2);
}
onConnectionFailed(mDevice);
}
mLogger.debug("BluetoothService$ConnectingThread.run: exiting");
}
// Begin Bluetooth connection
public void run() {
Log.w(TAG, "ConnectionThread - run()");
// Cancel discovery because it will slow down the connection
connectAdapter.cancelDiscovery();
try {
// Connect through the socket will block until it succeeds or throws an exception
connectSocket.connect();
} catch (IOException connectException) {
// Unable to connect; close the socket and get out
try {
connectSocket.close();
// If connection fail less than 2 times
Log.w(TAG, "Connection fail " + count + 1 + " times");
if (count < 2) {
count++;
beginConnection();
}
} catch (IOException closeException) {
}
return;
}
// Do work to manage the communication in CommunicationThread
Message msg = new Message();
msg.obj = "btConnected";
handler.sendMessage(msg);
beginCommunication(connectSocket);
}
public void cancel() {
try {
mmSocket.close();
} catch (IOException e) {
TopoDroidLog.Log(TopoDroidLog.LOG_ERR, "close() of connect socket failed " + e);
}
}
public void run() {
// Log.v("DistoX", "sync ConnectingThread run");
setName("ConnectingThread");
mAdapter.cancelDiscovery(); // Always cancel discovery because it will slow down a connection
try { // Make a connection to the BluetoothSocket
mmSocket.connect(); // blocking call
} catch (IOException e) {
connectionFailed();
try { // Close the socket
mmSocket.close();
} catch (IOException e2) {
TopoDroidLog.Log(
TopoDroidLog.LOG_ERR, "unable to close() socket during connection failure " + e2);
}
// SyncService.this.start(); // Start the service over to restart listening mode
return;
}
synchronized (SyncService.this) { // Reset the ConnectingThread because we're done
mConnectingThread = null;
}
connected(mmSocket, mmDevice); // Start the connected thread
// TopoDroidLog.Log( TopoDroidLog.LOG_SYNC, "sync connecting thread done");
}
public void run() {
// Always cancel discovery because it will slow down a connection
mBluetoothAdapter.cancelDiscovery();
// Make a connection to the BluetoothSocket
try {
// This is a blocking call and will only return on a
// successful connection or an exception
mmSocket.connect();
} catch (IOException e) {
connectionFailed();
// Close the socket
try {
mmSocket.close();
} catch (IOException e2) {
}
return;
}
// Reset the ConnectThread-connection ok
synchronized (MainActivity.this) {
mConnectThread = null;
}
// Start the connected thread
connected(mmSocket, mmDevice);
}
@Override
public void close() throws IOException {
if (isOpen) {
socket.close();
isOpen = false;
}
}
@Override
public void disconnect() {
if (!this.isConnected()) {
return;
}
if (inputStream != null) {
try {
inputStream.close();
} catch (Exception e) {
}
inputStream = null;
}
if (outputStream != null) {
try {
outputStream.close();
} catch (Exception e) {
}
outputStream = null;
}
if (btSocket != null) {
try {
btSocket.close();
} catch (Exception e) {
}
btSocket = null;
}
if (disconnectCallback != null) {
disconnectCallback.disconnect();
}
}
public void run() {
bluetoothAdapter.cancelDiscovery();
try {
Log.d(TAG, "About to connect");
socket.connect();
Log.d(TAG, "Connected");
synchronized (this) {
communicator = communicatorService.createCommunicatorThread(socket);
}
new Thread(
new Runnable() {
@Override
public void run() {
Log.d(TAG, "Start");
communicator.startCommunication();
}
})
.start();
} catch (IOException connectException) {
try {
socket.close();
} catch (IOException closeException) {
Log.d(TAG, closeException.getLocalizedMessage());
}
}
}
@Override
public void run() {
Log.i(TAG, "BEGIN mConnectThread SocketType:" + mSocketType);
setName("ConnectThread" + mSocketType);
// Always cancel discovery because it will slow down a connection
boolean t = false;
t = mAdapter.cancelDiscovery();
if (t == false) t = true;
try {
// Make a connection to the BluetoothSocket
// This is a blocking call and will only return on a
// successful connection or an exception
mmSocket.connect();
} catch (IOException e) {
// Close the socket
try {
mmSocket.close();
} catch (IOException e2) {
Log.e(TAG, "unable to close() " + mSocketType + " socket during connection failure", e2);
}
connectionFailed();
return;
}
// Reset the ConnectThread because we're done
synchronized (BluetoothService.this) {
mConnectThread = null;
}
// Start the connected thread
connected(mmSocket, mmDevice, mSocketType);
}
@Override
public void run() {
// adapter.cancelDiscovery();
isRunning = true;
cancelled = false;
int loopCount = 0;
BluetoothSocket tmpSocket = null;
while (true) {
tmpSocket = null;
// Break out if this was cancelled.
if (cancelled) {
break;
}
// Get the device socket.
try {
tmpSocket = device.createRfcommSocketToServiceRecord(UUID_RFCOMM_GENERIC);
} catch (SecurityException e) {
e.printStackTrace();
} catch (IllegalArgumentException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
}
// Try to connect to the socket.
try {
tmpSocket.connect();
// threadHandler.sendEmptyMessage(MSG_CONNECTED);
break;
} catch (IOException connectException) {
try {
tmpSocket.close();
} catch (IOException closeException) {
}
}
// Wait to try to connect to the device again.
int sleepSeconds = (int) (((loopCount / 5) + 1) * 1.5);
sleepSeconds = (sleepSeconds > 10) ? 10 : sleepSeconds;
// Log.v(TAG, "\tFailed to connect, will try again in "+ sleepSeconds +" sec.");
try {
Thread.sleep(sleepSeconds * 1000);
} catch (InterruptedException e) {
e.printStackTrace();
}
loopCount++;
}
isRunning = false;
// Tell the main thread to manage the socket.
if (tmpSocket != null) {
mSsocket = tmpSocket;
mThreadHandler.sendEmptyMessage(MSG_MANAGE_SOCKET);
}
}
// Cancel an open connection and terminate the thread
public void cancel() {
try {
bluetoothSocket.close();
} catch (IOException e) {
e.printStackTrace();
}
}
public synchronized void disconnect(BluetoothDevice device) {
String addressToStop = device.getAddress();
BluetoothSocket socket = btSockets.get(addressToStop);
if (socket != null) {
try {
socket.close();
} catch (IOException e) {
e.printStackTrace();
}
}
btSockets.remove(addressToStop);
btDeviceAddresses.remove(addressToStop);
DebugLog.i(TAG, "stop");
int size = connectedThreads.size();
for (int i = 0; i < size; i++) {
ConnectedThread conThread = connectedThreads.get(i);
if (conThread != null) {
String address = conThread.getMmDevice().getAddress();
if (addressToStop.equals(address)) {
conThread = null;
connectedThreads.remove(i);
break;
}
}
}
this.start();
}
public void run() {
InputStream inStream = null;
OutputStream outStream = null;
mBluetoothAdapter.cancelDiscovery();
try {
mySocket.connect();
} catch (IOException e) {
Log.e("Bluetooth", mDevice.getName() + ": Could not establish connection with device");
try {
mySocket.close();
} catch (IOException e1) {
Log.e("Bluetooth", mDevice.getName() + ": could not close socket", e1);
}
}
String line = "";
try {
inStream = mySocket.getInputStream();
outStream = mySocket.getOutputStream();
outStream.write(message.getBytes());
outStream.flush();
Log.e("Bluetooth", "Message sent: " + message);
inStream.close();
outStream.close();
cancel();
} catch (IOException e) {
e.printStackTrace();
}
}
public void cancelar() {
try {
socketConectado.close();
} catch (IOException e) {
Log.e(TAG, "close() of connect socket failed", e);
}
}
public void cancel() {
try {
mySocket.close();
} catch (IOException e) {
Log.e("Bluetooth", mDevice.getName() + ": Could not close socket");
}
}
public void close() {
if (mInputStream != null) {
try {
mInputStream.close();
} catch (IOException e) {
e.printStackTrace();
}
}
if (mOutputStream != null) {
try {
mOutputStream.close();
} catch (IOException e) {
e.printStackTrace();
}
}
if (mBluetoothSocket != null) {
try {
mBluetoothSocket.close();
} catch (IOException e) {
e.printStackTrace();
}
}
if (mBluetoothServerSocket != null) {
try {
mBluetoothServerSocket.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
/**
* Listens for any incoming bluetooth connections and attempts to start the connection process
* if a connection is requested.
*
* @see com.example.drawfriends.BluetoothService#connected(BluetoothSocket, BluetoothDevice)
*/
public void run() {
setName("AcceptThread");
BluetoothSocket socket = null;
// Listen to the server socket if we're not connected
while (mState != STATE_CONNECTED) {
try {
// This is a blocking call and will only return on a
// successful connection or an exception
socket = mmServerSocket.accept();
} catch (IOException e) {
break;
}
// If a connection was accepted
if (socket != null) {
synchronized (BluetoothService.this) {
switch (mState) {
case STATE_LISTEN:
case STATE_CONNECTING:
// Situation normal. Start the connected thread.
connected(socket, socket.getRemoteDevice());
break;
case STATE_NONE:
case STATE_CONNECTED:
// Either not ready or already connected. Terminate new socket.
try {
socket.close();
} catch (IOException e) {
}
break;
}
}
}
}
}
public void disconnect() {
if (mDeviceSocket != null) {
try {
mDeviceSocket.close();
mDeviceSocket = null;
} catch (IOException e) {
Logger.BT("ERROR: close socket failed (" + e.getMessage() + ")");
}
}
if (mOutputStream != null) {
try {
mOutputStream.close();
mOutputStream = null;
} catch (IOException e) {
Logger.BT("ERROR: close output stream failed (" + e.getMessage() + ")");
}
}
if (mInputStream != null) {
try {
mInputStream.close();
mInputStream = null;
} catch (IOException e) {
Logger.BT("ERROR: close input stream failed (" + e.getMessage() + ")");
}
}
mSelectedDevice = null;
isConnected = false;
}
public void destroy() {
// Added in 6/11/2015
if (isServer) {
sendToClients("/1024:0");
isServer = false;
}
if (wifiMode) {
tcpManager.destroy();
} else {
try {
if (mSocket != null) {
mSocket.close();
}
if (serverSocket != null) {
serverSocket.close();
}
if (client_sockets != null) {
Iterator<BluetoothSocket> iter = client_sockets.iterator();
while (iter.hasNext()) iter.next().close();
client_sockets.clear();
}
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
dHandler.obtainMessage(SocioPhoneConstants.BT_EXCEPTION, e.getMessage()).sendToTarget();
}
}
}
// Cancel an in-progress connection and close the socket
public void cancel() {
Log.w(TAG, "ConnectionThread - cancel()");
try {
connectSocket.close();
} catch (IOException e) {
}
}
public void cancel() {
try {
mmSocket.close();
} catch (IOException e) {
Log.e(TAG, "close() of connect socket failed", e);
}
}
public void run() {
Log.i(TAG, "BEGIN mConnectThread");
setName("ConnectThread");
// Always cancel discovery because it will slow down a connection
mAdapter.cancelDiscovery();
// Make a connection to the BluetoothSocket
try {
// This is a blocking call and will only return on a
// successful connection or an exception
mmSocket.connect();
} catch (IOException e) {
connectionFailed();
// Close the socket
try {
mmSocket.close();
} catch (IOException e2) {
Log.e(TAG, "unable to close() socket during connection failure", e2);
}
// Start the service over to restart listening mode
BluetoothChatService.this.start();
return;
}
// Reset the ConnectThread because we're done
synchronized (BluetoothChatService.this) {
mConnectThread = null;
}
// Start the connected thread
connected(mmSocket, mmDevice);
}
@Override
public void run() {
setName(mHostName);
// establish the server socket
try {
mLogger.debug("BluetoothService$ListeningThread.run: opening server socket");
mServerSocket = mBtAdapter.listenUsingRfcommWithServiceRecord(mHostName, mHostUUID);
} catch (IOException e) {
mLogger.error(
"BluetoothService$ListeningThread.run: caught IOException from "
+ "listenUsingRfcommWithServiceRecord() call",
e);
return;
}
BluetoothSocket socket = null;
while (getServiceState() == BluetoothService.State.STATE_LISTENING) {
try {
// listen on the server socket. Keep in mind that the state can change while we're
// waiting.
// Note that when this call returns a BluetoothSocket, the socket is _already_ connected.
mLogger.debug("BluetoothService$ListeningThread.run: calling accept()");
socket = mServerSocket.accept(); // blocking call
mLogger.debug(
"BluetoothService$ListeningThread.run: accepted remote connection, "
+ "current state = "
+ getServiceState().toString());
onInboundConnectionRequestReceived(socket.getRemoteDevice());
} catch (IOException e) {
mLogger.error(
"BluetoothService$ListeningThread.run: caught IOException from server socket "
+ "accept() call",
e);
break;
}
if (getServiceState() == BluetoothService.State.STATE_LISTENING) {
onInboundConnection(socket);
} else {
mLogger.debug(
"BluetoothService$ListeningThread.run: current state is not "
+ "STATE_LISTENING, so closing socket");
try {
socket.close();
} catch (IOException e) {
mLogger.error(
"BluetoothService$ListeningThread.run: caught IOException from "
+ "socket close() call",
e);
break;
}
}
}
mLogger.debug("BluetoothService$ListeningThread.run: exiting");
cancel();
}
public void cerraSocket() {
try {
mmSocket.close();
} catch (IOException e) {
e.printStackTrace();
}
}
public void run() {
// Cancel discovery because it will slow down the connection
mBluetoothAdapter.cancelDiscovery();
try {
// Connect the device through the socket. This will block
// until it succeeds or throws an exception
mmSocket.connect();
System.out.print("trt");
// Toast.makeText(getApplicationContext(), "After connect",
// 2000).show() ;
} catch (Exception e) {
// Toast.makeText(getApplicationContext(), "Error" +
// e.toString(), 2000).show() ;
// Unable to connect; close the socket and get out
try {
mmSocket.close();
} catch (IOException Exception) {
// Toast.makeText(getApplicationContext(),
// "Error in closing socket" + e, 2000).show() ;
}
return;
}
// Do work to manage the connection (in a separate thread)
manageConnectedSocket(mmSocket);
}
@Override
public void disconnect(BtDevice btDevice) {
BtContainer btContainer = AppProvider.getBtContainer();
BluetoothSocket socket = btContainer.getSocketForDevice(btDevice);
if (socket != null) {
try {
InputStream is = socket.getInputStream();
OutputStream os = socket.getOutputStream();
if (is != null) {
is.close();
}
if (os != null) {
os.close();
}
socket.close();
} catch (IOException e) {
btControllerInterface.disconnectFailed(btDevice);
}
}
btContainer.removeConnected(btDevice);
btControllerInterface.updateConnectedList();
}
/* Call this from the main Activity to shutdown the connection */
public void cancel() {
stopThread = true;
try {
mmSocket.close();
} catch (IOException e) {
e.printStackTrace();
}
}
/* matikan connection */
public void cancel() {
try {
mmSocket.close();
} catch (IOException e) {
Log.e("ywlog", e.getMessage());
e.printStackTrace();
}
}
