Exemplo n.º 1
0
  // From: http://forum.java.sun.com/thread.jspa?threadID=378460&tstart=135
  void drawArrow(
      Graphics2D g2d,
      int xCenter,
      int yCenter,
      int x,
      int y,
      float stroke,
      BasicStroke drawStroke) {
    double aDir = Math.atan2(xCenter - x, yCenter - y);
    // Line can be dashed.
    g2d.setStroke(drawStroke);
    g2d.drawLine(x, y, xCenter, yCenter);
    // make the arrow head solid even if dash pattern has been specified
    g2d.setStroke(lineStroke);
    Polygon tmpPoly = new Polygon();
    int i1 = 12 + (int) (stroke * 2);
    // make the arrow head the same size regardless of the length length
    int i2 = 6 + (int) stroke;
    tmpPoly.addPoint(x, y);
    tmpPoly.addPoint(x + xCor(i1, aDir + .5), y + yCor(i1, aDir + .5));
    tmpPoly.addPoint(x + xCor(i2, aDir), y + yCor(i2, aDir));
    tmpPoly.addPoint(x + xCor(i1, aDir - .5), y + yCor(i1, aDir - .5));
    tmpPoly.addPoint(x, y); // arrow tip
    g2d.drawPolygon(tmpPoly);

    // Remove this line to leave arrow head unpainted:
    g2d.fillPolygon(tmpPoly);
  }
Exemplo n.º 2
0
    public LinePanel() {
      p = new Polygon();
      p.addPoint(nextX, nextY);
      addKeyListener(
          new KeyAdapter() {

            @Override
            public void keyPressed(KeyEvent e) {
              switch (e.getKeyCode()) {
                case KeyEvent.VK_UP:
                  nextY -= step;
                  break;
                case KeyEvent.VK_DOWN:
                  nextY += step;
                  break;
                case KeyEvent.VK_LEFT:
                  nextX -= step;
                  break;
                case KeyEvent.VK_RIGHT:
                  nextX += step;
                  break;
              }
              p.addPoint(nextX, nextY);
              repaint();
            }
          });
    }
Exemplo n.º 3
0
    public void paintIcon(Component c, Graphics g, int x, int y) {
      int w = getIconWidth();
      int h = w;
      Polygon p = new Polygon();
      switch (direction) {
        case EAST:
          p.addPoint(x + 2, y);
          p.addPoint(x + w - 2, y + h / 2);
          p.addPoint(x + 2, y + h - 1);
          break;

        case SOUTH:
          p.addPoint(x, y + 2);
          p.addPoint(x + w / 2, y + h - 2);
          p.addPoint(x + w - 1, y + 2);
          break;
      }
      g.fillPolygon(p);
    }
Exemplo n.º 4
0
  public void processPolygonSpline(boolean shiftDown) {
    mCurrPC.setBatchModeOn();
    if (!shiftDown) mCurrPC.unselectAll();

    // loop on spline pts to construct a Polygon
    Polygon srcArea = new Polygon();
    for (int s = 0; s < mSplinePoints.size(); s++) {
      Point p = (Point) mSplinePoints.elementAt(s);
      int x = p.x - mLeft - 5;
      int y = p.y - mTop - 5;

      srcArea.addPoint(x, y);
    }

    mSplinePoints.removeAllElements();

    // search for matches
    byte[] currFilterResults = fdm.getResults();
    double[] yArray1 = getYArray1();
    double[] xArray1 = getXArray1();
    double[] yArray2 = getYArray2();
    double[] xArray2 = getXArray2();
    Point p1 = new Point();
    Point p2 = new Point();

    for (int i = 0; i < mCurrPC.getSize(); i++) {
      if (!mIgnoreFilter
          && (mCurrPC.isDeleted(i) || currFilterResults[i] != 4 || !mCurrPC.isSelectedLayer(i)))
        continue;
      double yi = yArray1[i];
      double xi = xArray1[i];
      double xi2 = Float.NaN;
      double yi2 = Float.NaN;
      double xx2 = Float.NaN;
      double yy2 = Float.NaN;

      // correct the X value if necessary
      xi = correctX(xi);

      double xx1 = (xi - winXOrigin) * winXScale;
      double yy1 = (yi - winYOrigin) * winYScale;

      // correct the Y coordinate if necessary
      yy1 = correctY(yy1);

      if (!isYAxisScaler()) {
        yi2 = yArray2[i];
        yy2 = (yi2 - winYOrigin) * winYScale;
        ;
        yy2 = correctY(yy2);
      } else yy2 = yy1;

      if (!isXAxisScaler()) {
        xi2 = xArray2[i];
        xi2 = correctX(xi2);
        xx2 = (xi2 - winXOrigin) * winXScale;
      } else xx2 = xx1;

      p1.setLocation((int) xx1, (int) yy1);
      p2.setLocation((int) xx2, (int) yy2);

      if (srcArea.contains(p1) || srcArea.contains(p2)) {
        mCurrPC.select(i);
      }
    }
    mViewManager.invalidateAllViews();
    mCurrPC.setBatchModeOff();
  }
Exemplo n.º 5
0
  public void processSectionSpline(boolean shiftDown) {
    mCurrPC.setBatchModeOn();

    if (!shiftDown) mCurrPC.unselectAll();

    // loop on spline pts
    for (int s = 0; s < mSplinePoints.size() - 2; s++) {
      Point p1 = (Point) mSplinePoints.elementAt(s);
      Point p2 = (Point) mSplinePoints.elementAt(s + 1);

      int x1 = p1.x - mLeft - 5;
      int y1 = p1.y - mTop - 5;
      int x2 = p2.x - mLeft - 5;
      int y2 = p2.y - mTop - 5;

      // construct the search polygon
      double dx = x1 - x2;
      double dy = y1 - y2;
      int width1 = ComputeSectionPixelWidth(p1);
      int width2 = ComputeSectionPixelWidth(p2);

      if (dx == 0 && dy == 0) return;
      double dist = (double) Math.pow(dx * dx + dy * dy, 0.5f);

      double p1x = x1 + (double) width1 * (-dy / dist);
      double p1y = y1 + (double) width1 * (dx / dist);

      double p2x = x1 - (double) width1 * (-dy / dist);
      double p2y = y1 - (double) width1 * (dx / dist);

      double p3x = x2 + (double) width2 * (-dy / dist);
      double p3y = y2 + (double) width2 * (dx / dist);

      double p4x = x2 - (double) width2 * (-dy / dist);
      double p4y = y2 - (double) width2 * (dx / dist);

      Polygon srcArea = new Polygon();
      srcArea.addPoint((int) p2x, (int) p2y);
      srcArea.addPoint((int) p1x, (int) p1y);
      srcArea.addPoint((int) p3x, (int) p3y);
      srcArea.addPoint((int) p4x, (int) p4y);

      // search for matches
      byte[] currFilterResults = fdm.getResults();
      double[] yArray1 = getYArray1();
      double[] xArray1 = getXArray1();
      double[] yArray2 = getYArray2();
      double[] xArray2 = getXArray2();
      mCurrPC.setBatchModeOn();
      for (int i = 0; i < mCurrPC.getSize(); i++) {
        if (!mIgnoreFilter
            && (mCurrPC.isDeleted(i) || currFilterResults[i] != 4 || !mCurrPC.isSelectedLayer(i)))
          continue;
        double yi = yArray1[i];
        double xi = xArray1[i];
        double xi2 = Float.NaN;
        double yi2 = Float.NaN;
        double xx2 = Float.NaN;
        double yy2 = Float.NaN;

        // correct the X value if necessary
        xi = correctX(xi);

        double xx1 = (xi - winXOrigin) * winXScale;
        double yy1 = (yi - winYOrigin) * winYScale;

        // correct the Y coordinate if necessary
        yy1 = correctY(yy1);

        if (!isYAxisScaler()) {
          yi2 = yArray2[i];
          yy2 = (yi2 - winYOrigin) * winYScale;
          ;
          yy2 = correctY(yy2);
        } else yy2 = yy1;

        if (!isXAxisScaler()) {
          xi2 = xArray2[i];
          xi2 = correctX(xi2);
          xx2 = (xi2 - winXOrigin) * winXScale;
        } else xx2 = xx1;

        if (srcArea.contains(new Point((int) xx1, (int) yy1))
            || srcArea.contains(new Point((int) xx2, (int) yy2))) {
          mCurrPC.select(i);
        }
      }
    } // for splines

    mSplinePoints.removeAllElements();
    mViewManager.invalidateAllViews();
    mCurrPC.setBatchModeOff();
  }
package gui;