예제 #1
0
파일: Phase.java 프로젝트: ut-osa/laminar
  /**
   * Notify that the concurrent phase has completed successfully. This must only be called by a
   * single thread after it has determined that the phase has been completed successfully.
   */
  public static void notifyConcurrentPhaseComplete() {
    if (Options.verbose.getValue() >= 2) {
      Log.write("< Concurrent phase ");
      Log.write(getName(concurrentPhaseId));
      Log.writeln(" complete >");
    }
    /* Concurrent phase is complete*/
    concurrentPhaseId = 0;
    /* Remove it from the stack */
    popScheduledPhase();
    /* Pop the next phase off the stack */
    int nextScheduledPhase = getNextPhase();

    if (nextScheduledPhase > 0) {
      short schedule = getSchedule(nextScheduledPhase);

      /* A concurrent phase, lets wake up and do it all again */
      if (schedule == SCHEDULE_CONCURRENT) {
        concurrentPhaseId = getPhaseId(nextScheduledPhase);
        scheduleConcurrentWorkers();
        return;
      }

      /* Push phase back on and resume atomic collection */
      pushScheduledPhase(nextScheduledPhase);
      VM.collection.triggerAsyncCollection(Collection.INTERNAL_PHASE_GC_TRIGGER);
    }
  }
  @Inline
  private boolean acquireRecyclableBlockAddressOrder() {
    if (recyclableExhausted) {
      if (VM.VERIFY_ASSERTIONS && Options.verbose.getValue() >= 9) {
        Log.writeln("[no recyclable available]");
      }
      return false;
    }
    int markState = 0;
    boolean usable = false;
    while (!usable) {
      Address next = recyclableBlock.plus(BYTES_IN_BLOCK);
      if (recyclableBlock.isZero() || ImmixSpace.isRecycleAllocChunkAligned(next)) {
        recyclableBlock = space.acquireReusableBlocks();
        if (recyclableBlock.isZero()) {
          recyclableExhausted = true;
          if (VM.VERIFY_ASSERTIONS && Options.verbose.getValue() >= 9) {
            Log.writeln("[recyclable exhausted]");
          }
          line = LINES_IN_BLOCK;
          return false;
        }
      } else {
        recyclableBlock = next;
      }
      markState = Block.getBlockMarkState(recyclableBlock);
      usable = (markState > 0 && markState <= ImmixSpace.getReusuableMarkStateThreshold(copy));
      if (copy && Block.isDefragSource(recyclableBlock)) usable = false;
    }
    if (VM.VERIFY_ASSERTIONS) VM.assertions._assert(!Block.isUnused(recyclableBlock));
    Block.setBlockAsReused(recyclableBlock);

    lineUseCount += (LINES_IN_BLOCK - markState);
    return true; // found something good
  }
예제 #3
0
파일: Phase.java 프로젝트: ut-osa/laminar
 /** Notify that the concurrent phase has not finished, and must be re-attempted. */
 public static void notifyConcurrentPhaseIncomplete() {
   if (Options.verbose.getValue() >= 2) {
     Log.write("< Concurrent phase ");
     Log.write(getName(concurrentPhaseId));
     Log.writeln(" incomplete >");
   }
   scheduleConcurrentWorkers();
 }
예제 #4
0
 /**
  * This method logs a message with preprended thread id, if the verbosity level is greater or
  * equal to the passed level.
  *
  * @param minVerbose The required verbosity level
  * @param message The message to display
  */
 @Inline
 protected final void logMessage(int minVerbose, String message) {
   if (Options.verbose.getValue() >= minVerbose) {
     Log.prependThreadId();
     Log.write("    ");
     Log.writeln(message);
   }
 }
예제 #5
0
 /**
  * Log a message from within 'poll'
  *
  * @param space
  * @param message
  */
 private void logPoll(Space space, String message) {
   if (Options.verbose.getValue() >= 3) {
     Log.write("  [POLL] ");
     Log.write(space.getName());
     Log.write(": ");
     Log.writeln(message);
   }
 }
예제 #6
0
  /**
   * Send the data and summary for this stream.
   *
   * @param event The event
   * @param numTiles The number of tiles to send (which may be less than maxTileNum)
   */
  public void send(int event, int numTiles) {
    if (DEBUG) {
      Log.write("sending ");
      Log.write(numTiles);
      Log.writeln(" int values");
    }

    serverSpace.stream(streamId, numTiles);
    for (int index = 0; index < numTiles; index++) serverSpace.streamIntValue(data[index]);
    serverSpace.streamEnd();

    sendSummary();
  }
예제 #7
0
 /**
  * The VM is about to exit. Perform any clean up operations.
  *
  * @param value The exit value
  */
 @Interruptible
 public void notifyExit(int value) {
   if (Options.harnessAll.getValue()) harnessEnd();
   if (Options.verbose.getValue() == 1) {
     Log.write("[End ");
     totalTime.printTotalSecs();
     Log.writeln(" s]");
   } else if (Options.verbose.getValue() == 2) {
     Log.write("[End ");
     totalTime.printTotalMillis();
     Log.writeln(" ms]");
   }
   if (Options.verboseTiming.getValue()) printDetailedTiming(true);
 }
예제 #8
0
 /**
  * Is the specified object live?
  *
  * @param object The object.
  * @return True if the object is live.
  */
 @Inline
 public boolean isLive(ObjectReference object) {
   Space space = Space.getSpaceForObject(object);
   if (space == Plan.loSpace) return Plan.loSpace.isLive(object);
   else if (space == Plan.ploSpace) return Plan.ploSpace.isLive(object);
   else if (Plan.USE_CODE_SPACE && space == Plan.smallCodeSpace)
     return Plan.smallCodeSpace.isLive(object);
   else if (Plan.USE_CODE_SPACE && space == Plan.largeCodeSpace)
     return Plan.largeCodeSpace.isLive(object);
   else if (space == null) {
     if (VM.VERIFY_ASSERTIONS) {
       Log.write("space failure: ");
       Log.writeln(object);
     }
   }
   return true;
 }
예제 #9
0
파일: Phase.java 프로젝트: ut-osa/laminar
 /**
  * Notify that the current thread believes that a concurrent collection phase is complete.
  *
  * @return True if this was the last thread.
  */
 public static boolean completeConcurrentPhase() {
   boolean result = false;
   concurrentWorkersLock.acquire();
   if (VM.VERIFY_ASSERTIONS) VM.assertions._assert(allowConcurrentWorkersActive);
   concurrentWorkersActive--;
   if (concurrentWorkersActive == 0) {
     allowConcurrentWorkersActive = false;
     result = true;
   }
   if (Options.verbose.getValue() >= 3) {
     Log.write("< Concurrent worker ");
     Log.write(concurrentWorkersActive);
     Log.write(" completed phase ");
     Log.write(getName(concurrentPhaseId));
     Log.writeln(" >");
   }
   concurrentWorkersLock.release();
   return result;
 }
  /**
   * Perform some concurrent collection work.
   *
   * @param phaseId The unique phase identifier
   */
  @Unpreemptible
  public void concurrentCollectionPhase(short phaseId) {
    if (phaseId == Concurrent.CONCURRENT_CLOSURE) {
      if (VM.VERIFY_ASSERTIONS) {
        VM.assertions._assert(!Plan.gcInProgress());
      }
      TraceLocal trace = getCurrentTrace();
      while (!trace.incrementalTrace(100)) {
        if (group.isAborted()) {
          trace.flush();
          break;
        }
      }
      if (rendezvous() == 0) {
        continueCollecting = false;
        if (!group.isAborted()) {
          /* We are responsible for ensuring termination. */
          if (Options.verbose.getValue() >= 2) Log.writeln("< requesting mutator flush >");
          VM.collection.requestMutatorFlush();

          if (Options.verbose.getValue() >= 2) Log.writeln("< mutators flushed >");

          if (concurrentTraceComplete()) {
            continueCollecting = Phase.notifyConcurrentPhaseComplete();
          } else {
            continueCollecting = true;
            Phase.notifyConcurrentPhaseIncomplete();
          }
        }
      }
      rendezvous();
      return;
    }

    Log.write("Concurrent phase ");
    Log.write(Phase.getName(phaseId));
    Log.writeln(" not handled.");
    VM.assertions.fail("Concurrent phase not handled!");
  }
예제 #11
0
 /**
  * Trace a reference during GC. This involves determining which collection policy applies and
  * calling the appropriate <code>trace</code> method.
  *
  * @param target The object the interior edge points within.
  * @param slot The location of the interior edge.
  * @param root True if this is a root edge.
  */
 public final void processInteriorEdge(ObjectReference target, Address slot, boolean root) {
   Address interiorRef = slot.loadAddress();
   Offset offset = interiorRef.diff(target.toAddress());
   ObjectReference newTarget = traceObject(target, root);
   if (VM.VERIFY_ASSERTIONS) {
     if (offset.sLT(Offset.zero()) || offset.sGT(Offset.fromIntSignExtend(1 << 24))) {
       // There is probably no object this large
       Log.writeln("ERROR: Suspiciously large delta to interior pointer");
       Log.write("       object base = ");
       Log.writeln(target);
       Log.write("       interior reference = ");
       Log.writeln(interiorRef);
       Log.write("       delta = ");
       Log.writeln(offset);
       VM.assertions._assert(false);
     }
   }
   slot.store(newTarget.toAddress().plus(offset));
 }
예제 #12
0
파일: Phase.java 프로젝트: ut-osa/laminar
 /** Attempt to begin execution of a concurrent collection phase. */
 public static boolean startConcurrentPhase() {
   boolean result = false;
   concurrentWorkersLock.acquire();
   if (concurrentPhaseActive()) {
     if (allowConcurrentWorkersActive) {
       concurrentWorkersActive++;
       result = true;
     }
     VM.activePlan.collector().clearResetConcurrentWork();
   }
   if (Options.verbose.getValue() >= 2) {
     if (result) {
       Log.write("< Concurrent worker ");
       Log.write(concurrentWorkersActive - 1);
       Log.write(" started phase ");
       Log.write(getName(concurrentPhaseId));
       Log.writeln(" >");
     } else {
       Log.writeln("< worker failed in attempt to start phase >");
     }
   }
   concurrentWorkersLock.release();
   return result;
 }
예제 #13
0
파일: Phase.java 프로젝트: ut-osa/laminar
  /** Process the phase stack. This method is called by multiple threads. */
  private static boolean processPhaseStack(boolean resume) {
    int order = VM.collection.rendezvous(1001);
    final boolean primary = order == 1;

    boolean log = Options.verbose.getValue() >= 6;
    boolean logDetails = Options.verbose.getValue() >= 7;

    if (primary && resume) {
      if (VM.VERIFY_ASSERTIONS) VM.assertions._assert(!Phase.isPhaseStackEmpty());
      if (VM.VERIFY_ASSERTIONS) VM.assertions._assert(!Plan.gcInProgress());
      Plan.setGCStatus(Plan.GC_PROPER);
    }

    /* In order to reduce the need for synchronization, we keep an odd or even
     * counter for the number of phases processed. As each phase has a single
     * rendezvous it is only possible to be out by one so the odd or even counter
     * protects us. */
    boolean isEvenPhase = true;

    if (primary) {
      /* First phase will be even, so we say we are odd here so that the next phase set is even*/
      setNextPhase(false, getNextPhase(), false);
    }

    /* Make sure everyone sees the first phase */
    VM.collection.rendezvous(1002);

    /* Global and Collector instances used in phases */
    Plan plan = VM.activePlan.global();
    CollectorContext collector = VM.activePlan.collector();

    /* The main phase execution loop */
    int scheduledPhase;
    while ((scheduledPhase = getCurrentPhase(isEvenPhase)) > 0) {
      short schedule = getSchedule(scheduledPhase);
      short phaseId = getPhaseId(scheduledPhase);
      Phase p = getPhase(phaseId);

      /* Start the timer(s) */
      if (primary) {
        if (resume) {
          resumeComplexTimers();
        }
        if (p.timer != null) p.timer.start();
        if (startComplexTimer > 0) {
          Phase.getPhase(startComplexTimer).timer.start();
          startComplexTimer = 0;
        }
      }

      if (log) {
        Log.write("Execute ");
        p.logPhase();
      }

      /* Execute a single simple scheduled phase */
      switch (schedule) {
          /* Global phase */
        case SCHEDULE_GLOBAL:
          {
            if (logDetails) Log.writeln(" as Global...");
            if (primary) plan.collectionPhase(phaseId);
            break;
          }

          /* Collector phase */
        case SCHEDULE_COLLECTOR:
          {
            if (logDetails) Log.writeln(" as Collector...");
            collector.collectionPhase(phaseId, primary);
            break;
          }

          /* Mutator phase */
        case SCHEDULE_MUTATOR:
          {
            if (logDetails) Log.writeln(" as Mutator...");
            /* Iterate through all mutator contexts */
            MutatorContext mutator;
            while ((mutator = VM.activePlan.getNextMutator()) != null) {
              mutator.collectionPhase(phaseId, primary);
            }
            break;
          }

          /* Concurrent phase */
        case SCHEDULE_CONCURRENT:
          {
            /* We are yielding to a concurrent collection phase */
            if (logDetails) Log.writeln(" as Concurrent, yielding...");
            if (primary) {
              concurrentPhaseId = phaseId;
              scheduleConcurrentWorkers();
              /* Concurrent phase, we need to stop gc */
              Plan.setGCStatus(Plan.NOT_IN_GC);
            }
            VM.collection.rendezvous(1003);
            if (primary) {
              pauseComplexTimers();
            }
            return false;
          }

        default:
          {
            /* getNextPhase has done the wrong thing */
            VM.assertions.fail("Invalid schedule in Phase.processPhaseStack");
            break;
          }
      }

      if (primary) {
        /* Set the next phase by processing the stack */
        int next = getNextPhase();
        boolean needsResetRendezvous =
            (next > 0) && (schedule == SCHEDULE_MUTATOR && getSchedule(next) == SCHEDULE_MUTATOR);
        setNextPhase(isEvenPhase, next, needsResetRendezvous);
      }

      /* Sync point after execution of a phase */
      VM.collection.rendezvous(1004);

      /* Mutator phase reset */
      if (primary && schedule == SCHEDULE_MUTATOR) {
        VM.activePlan.resetMutatorIterator();
      }

      /* At this point, in the case of consecutive phases with mutator
       * scheduling, we have to double-synchronize to ensure all
       * collector threads see the reset mutator counter. */
      if (needsMutatorResetRendezvous(isEvenPhase)) {
        VM.collection.rendezvous(1005);
      }

      /* Stop the timer(s) */
      if (primary) {
        if (p.timer != null) p.timer.stop();
        if (stopComplexTimer > 0) {
          Phase.getPhase(stopComplexTimer).timer.stop();
          stopComplexTimer = 0;
        }
      }

      /* Flip the even / odd phase sense */
      isEvenPhase = !isEvenPhase;
      resume = false;
    }

    /* Phase stack exhausted so we return true */
    return true;
  }
예제 #14
0
 public final void printUsedPages() {
   Log.write("reserved = ");
   Log.write(Conversions.pagesToMBytes(getPagesReserved()));
   Log.write(" MB (");
   Log.write(getPagesReserved());
   Log.write(" pgs)");
   Log.write("      total = ");
   Log.write(Conversions.pagesToMBytes(getTotalPages()));
   Log.write(" MB (");
   Log.write(getTotalPages());
   Log.write(" pgs)");
   Log.writeln();
 }
예제 #15
0
 /** Print out statistics at the end of a GC */
 public final void printPostStats() {
   if ((Options.verbose.getValue() == 1) || (Options.verbose.getValue() == 2)) {
     Log.write("-> ");
     Log.writeDec(Conversions.pagesToBytes(getPagesUsed()).toWord().rshl(10));
     Log.write("KB   ");
     if (Options.verbose.getValue() == 1) {
       totalTime.printLast();
       Log.writeln(" ms]");
     } else {
       Log.write("End ");
       totalTime.printTotal();
       Log.writeln(" ms]");
     }
   }
   if (Options.verbose.getValue() > 2) {
     Log.write("   After Collection: ");
     Space.printUsageMB();
     if (Options.verbose.getValue() >= 4) {
       Log.write("                     ");
       Space.printUsagePages();
     }
     if (Options.verbose.getValue() >= 5) {
       Space.printVMMap();
     }
     Log.write("                     ");
     printUsedPages();
     Log.write("    Collection time: ");
     totalTime.printLast();
     Log.writeln(" ms");
   }
 }
예제 #16
0
 /** Print out statistics at the start of a GC */
 public void printPreStats() {
   if ((Options.verbose.getValue() == 1) || (Options.verbose.getValue() == 2)) {
     Log.write("[GC ");
     Log.write(Stats.gcCount());
     if (Options.verbose.getValue() == 1) {
       Log.write(" Start ");
       Plan.totalTime.printTotalSecs();
       Log.write(" s");
     } else {
       Log.write(" Start ");
       Plan.totalTime.printTotalMillis();
       Log.write(" ms");
     }
     Log.write("   ");
     Log.write(Conversions.pagesToKBytes(getPagesUsed()));
     Log.write("KB ");
     Log.flush();
   }
   if (Options.verbose.getValue() > 2) {
     Log.write("Collection ");
     Log.write(Stats.gcCount());
     Log.write(":        ");
     printUsedPages();
     Log.write("  Before Collection: ");
     Space.printUsageMB();
     if (Options.verbose.getValue() >= 4) {
       Log.write("                     ");
       Space.printUsagePages();
     }
     if (Options.verbose.getValue() >= 5) {
       Space.printVMMap();
     }
   }
 }
예제 #17
0
파일: Gen.java 프로젝트: dtzWill/vmkit
 /**
  * Print pre-collection statistics. In this class we prefix the output indicating whether the
  * collection was full heap or not.
  */
 public void printPreStats() {
   if ((Options.verbose.getValue() >= 1) && (gcFullHeap)) Log.write("[Full heap]");
   super.printPreStats();
 }
  private boolean acquireRecyclableLines(int bytes, int align, int offset) {
    while (line < LINES_IN_BLOCK || acquireRecyclableBlock()) {
      line = space.getNextAvailableLine(markTable, line);
      if (line < LINES_IN_BLOCK) {
        int endLine = space.getNextUnavailableLine(markTable, line);
        cursor = recyclableBlock.plus(Extent.fromIntSignExtend(line << LOG_BYTES_IN_LINE));
        limit = recyclableBlock.plus(Extent.fromIntSignExtend(endLine << LOG_BYTES_IN_LINE));
        if (SANITY_CHECK_LINE_MARKS) {
          Address tmp = cursor;
          while (tmp.LT(limit)) {
            if (tmp.loadByte() != (byte) 0) {
              Log.write("cursor: ");
              Log.writeln(cursor);
              Log.write(" limit: ");
              Log.writeln(limit);
              Log.write("current: ");
              Log.write(tmp);
              Log.write("  value: ");
              Log.write(tmp.loadByte());
              Log.write("   line: ");
              Log.write(line);
              Log.write("endline: ");
              Log.write(endLine);
              Log.write("  chunk: ");
              Log.write(Chunk.align(cursor));
              Log.write("     hw: ");
              Log.write(Chunk.getHighWater(Chunk.align(cursor)));
              Log.writeln(" values: ");
              Address tmp2 = cursor;
              while (tmp2.LT(limit)) {
                Log.write(tmp2.loadByte());
                Log.write(" ");
              }
              Log.writeln();
            }
            VM.assertions._assert(tmp.loadByte() == (byte) 0);
            tmp = tmp.plus(1);
          }
        }
        if (VM.VERIFY_ASSERTIONS && bytes <= BYTES_IN_LINE) {
          Address start = alignAllocationNoFill(cursor, align, offset);
          Address end = start.plus(bytes);
          VM.assertions._assert(end.LE(limit));
        }
        VM.memory.zero(cursor, limit.diff(cursor).toWord().toExtent());
        if (VM.VERIFY_ASSERTIONS && Options.verbose.getValue() >= 9) {
          Log.write("Z[");
          Log.write(cursor);
          Log.write("->");
          Log.write(limit);
          Log.writeln("]");
        }

        line = endLine;
        if (VM.VERIFY_ASSERTIONS && copy) VM.assertions._assert(!Block.isDefragSource(cursor));
        return true;
      }
    }
    return false;
  }
 /** Print out the status of the allocator (for debugging) */
 public final void show() {
   Log.write("cursor = ");
   Log.write(cursor);
   Log.write(" limit = ");
   Log.writeln(limit);
 }