コード例 #1
0
 public boolean alignStraight() {
   double angleOut = gyro.getAngle() * Preferences.getInstance().getDouble("Gyro_kP", 0.0);
   SmartDashboard.putNumber("gyroErr", gyro.getAngle());
   SmartDashboard.putNumber("angleOut", angleOut);
   robotDrive.arcadeDrive(0, angleOut);
   if (Math.abs(gyro.getAngle()) < Preferences.getInstance().getDouble("AngleBuffer", 100)) {
     arcadeDrive(0, 0);
     return true;
   }
   return false;
 }
コード例 #2
0
  private Notifications(Context context) {
    this.applicationContext = context.getApplicationContext();
    this.preferences = Preferences.getInstance(applicationContext);
    this.gcm = Gcm.getInstance(applicationContext);

    this.notificationIds = new HashMap<>();
    this.notificationIdCount = 0;
  }
コード例 #3
0
 // basic arcadeDrive: y=forward/backward speed, x=left/right speed
 public void arcadeDrive(double y, double x) {
   Preferences p = Preferences.getInstance();
   final boolean kReverseDirection = p.getBoolean("DriveTrainReverseDirection", false);
   robotDrive.setInvertedMotor(RobotDrive.MotorType.kRearLeft, kReverseDirection);
   robotDrive.setInvertedMotor(RobotDrive.MotorType.kRearRight, kReverseDirection);
   robotDrive.arcadeDrive(y, x + 0.05);
   SmartDashboard.putNumber("DriveTrainGyro", -gyro.getAngle()); // upside down
   SmartDashboard.putNumber("RangefinderVoltage", ultraDist.getVoltage());
 } // end arcadeDrive
コード例 #4
0
 // starts encoders
 public DriveTrain() {
   leftEncoder.start();
   rightEncoder.start();
   gyro.reset();
   Preferences p = Preferences.getInstance();
   if (!p.containsKey("DriveTrainShootLimitVoltage")) {
     p.putDouble("DriveTrainShootLimitVoltage", kDefaultShootLimitVoltage);
   }
   if (!p.containsKey("DriveTrainQuickTurnP")) {
     p.putDouble("DriveTrainQuickTurnP", kDefaultQuickTurnProportion);
   }
   if (!p.containsKey("DriveTrainQuickTurnDeadband")) {
     p.putDouble("DriveTrainQuickTurnDeadband", kDefaultQuickTurnDeadband);
   }
   if (!p.containsKey("DriveTrainReverseDirection")) {
     p.putBoolean("DriveTrainReverseDirection", kDefaultReverseDirection);
   }
   if (!p.containsKey("LeftEncoderRatio")) {
     p.putDouble("LeftEncoderRatio", 4.875);
   }
   if (!p.containsKey("RightEncoderRatio")) {
     p.putDouble("RightEncoderRatio", 4.875);
   }
   if (!p.containsKey("Encoder_kP")) {
     p.putDouble("Encoder_kP", 0.05);
   }
   if (!p.containsKey("OutputMin")) {
     p.putDouble("OutputMin", .2);
   }
   if (!p.containsKey("DistBuffer")) {
     p.putDouble("DistBuffer", 1);
   }
   if (!p.containsKey("Gyro_kP")) {
     p.putDouble("Gyro_kP", 1 / 18);
   }
   if (!p.containsKey("AngleBuffer")) {
     p.putDouble("AngleBuffer", 4.5);
   }
   if (!p.containsKey("AutoDist_0")) {
     p.putDouble("AutoDist_0", 0.0);
   }
   if (!p.containsKey("AutoDist_1")) {
     p.putDouble("AutoDist_1", 0.0);
   }
   if (!p.containsKey("AutoDist_2")) {
     p.putDouble("AutoDist_2", 0.0);
   }
   if (!p.containsKey("AutoDist_3")) {
     p.putDouble("AutoDist_3", 0.0);
   }
   if (!p.containsKey("ShiftWhenTurningThreshold")) {
     p.putDouble("ShiftWhenTurningThreshold", 0.5);
   }
   if (!p.containsKey("ShiftWhenTurningDelay")) {
     p.putDouble("ShiftWhenTurningDelay", 1.5);
   }
 } // end constructor
コード例 #5
0
 // basic arcadeDrive: y=forward/backward speed, x=left/right speed
 public void arcadeDrive(double y, double x) {
   SmartDashboard.putNumber("RightEncoder", rightEncoder.get());
   SmartDashboard.putNumber("LeftEncoder", leftEncoder.get());
   Preferences p = Preferences.getInstance();
   final boolean kReverseDirection = p.getBoolean("DriveTrainReverseDirection", false);
   robotDrive.setInvertedMotor(RobotDrive.MotorType.kRearLeft, kReverseDirection);
   robotDrive.setInvertedMotor(RobotDrive.MotorType.kRearRight, kReverseDirection);
   robotDrive.arcadeDrive(y, x);
 } // end arcadeDrive
コード例 #6
0
 public void enable() {
   rightEncoder.reset();
   leftEncoder.reset();
   rightEncoder.start();
   leftEncoder.start();
   gyro.reset();
   final boolean kReverseDirection =
       Preferences.getInstance().getBoolean("DriveTrainReverseDirection", false);
   robotDrive.setInvertedMotor(RobotDrive.MotorType.kRearLeft, kReverseDirection);
   robotDrive.setInvertedMotor(RobotDrive.MotorType.kRearRight, kReverseDirection);
 } // end enable
コード例 #7
0
  @Override
  public void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.conversations);

    gcm = Gcm.getInstance(getApplicationContext());
    billing = Billing.getInstance(getApplicationContext());
    database = Database.getInstance(getApplicationContext());
    preferences = Preferences.getInstance(getApplicationContext());

    Toolbar toolbar = (Toolbar) findViewById(R.id.toolbar);
    ViewCompat.setElevation(toolbar, getResources().getDimension(R.dimen.toolbar_elevation));
    setSupportActionBar(toolbar);

    LinearLayoutManager layoutManager = new LinearLayoutManager(this);
    layoutManager.setOrientation(LinearLayoutManager.VERTICAL);
    adapter = new ConversationsRecyclerViewAdapter(this, layoutManager);
    recyclerView = (RecyclerView) findViewById(R.id.list);
    recyclerView.setHasFixedSize(true);
    recyclerView.setLayoutManager(layoutManager);
    recyclerView.setAdapter(adapter);

    actionMode = null;
    actionModeEnabled = false;

    SwipeRefreshLayout swipeRefreshLayout =
        (SwipeRefreshLayout) findViewById(R.id.swipe_refresh_layout);
    swipeRefreshLayout.setOnRefreshListener(
        new SwipeRefreshLayout.OnRefreshListener() {
          @Override
          public void onRefresh() {
            preFullUpdate();
          }
        });
    swipeRefreshLayout.setColorSchemeResources(R.color.accent);

    ImageButton button = (ImageButton) findViewById(R.id.new_button);
    ViewCompat.setElevation(button, getResources().getDimension(R.dimen.fab_elevation));
    button.setOnClickListener(
        new View.OnClickListener() {
          @Override
          public void onClick(View v) {
            if (!preferences.getEmail().equals("")
                && !preferences.getPassword().equals("")
                && !preferences.getDid().equals("")) {
              Intent intent = new Intent(conversationsActivity, NewConversationActivity.class);
              startActivity(intent);
            }
          }
        });

    SynchronizationIntervalReceiver.setupSynchronizationInterval(getApplicationContext());
  }
コード例 #8
0
 public void tankDrive(double leftSpeed, double rightSpeed) {
   Preferences p = Preferences.getInstance();
   final boolean kReverseDirection = p.getBoolean("DriveTrainReverseDirection", false);
   robotDrive.setInvertedMotor(RobotDrive.MotorType.kRearLeft, kReverseDirection);
   robotDrive.setInvertedMotor(RobotDrive.MotorType.kRearRight, kReverseDirection);
   //        if (kReverseDirection) {
   //            robotDrive.tankDrive(rightSpeed, leftSpeed);
   //            return;
   //        }
   robotDrive.tankDrive(leftSpeed, rightSpeed);
   SmartDashboard.putNumber("gyroErr", gyro.getAngle());
   SmartDashboard.putNumber("encoder", rightEncoder.get());
 } // end tankDrive
コード例 #9
0
 // starts encoders
 public DriveTrain() {
   leftEncoder.start();
   rightEncoder.start();
   gyro.reset();
   Preferences p = Preferences.getInstance();
   if (!p.containsKey("DriveTrainShootLimitVoltage")) {
     p.putDouble("DriveTrainShootLimitVoltage", kDefaultShootLimitVoltage);
   }
   if (!p.containsKey("DriveTrainQuickTurnP")) {
     p.putDouble("DriveTrainQuickTurnP", kDefaultQuickTurnProportion);
   }
   if (!p.containsKey("DriveTrainQuickTurnDeadband")) {
     p.putDouble("DriveTrainQuickTurnDeadband", kDefaultQuickTurnDeadband);
   }
   if (!p.containsKey("DriveTrainReverseDirection")) {
     p.putBoolean("DriveTrainReverseDirection", kDefaultReverseDirection);
   }
 } // end constructor
コード例 #10
0
 public boolean driveStraight(double dist) {
   SmartDashboard.putNumber("RightEncoder", rightEncoder.get());
   SmartDashboard.putNumber("LeftEncoder", leftEncoder.get());
   Preferences p = Preferences.getInstance();
   L_encoderVal =
       leftEncoder.get()
           / p.getDouble(
               "LeftEncoderRatio",
               0.0); // converts encoder value to inches; encoder ratio should be about 58.76
   R_encoderVal =
       rightEncoder.get()
           / p.getDouble("RightEncoderRatio", 0.0); // converts encoder value to inches
   encoderVal = (R_encoderVal); // only one encoder
   encoderErr = dist - encoderVal;
   distOut =
       encoderErr * p.getDouble("Encoder_kP", 0.0)
           + (Math.abs(encoderErr) / encoderErr)
               * p.getDouble(
                   "OutputMin",
                   0.0); // Encoder kP = 0.5; abs(x)/x returns sign of x; 0.2 is the min. magnitude
   gyroErr = gyro.getAngle(); // Setpoint is always 0
   double angleOut = gyroErr * p.getDouble("Gyro_kP", 0.0) + .3; // * distOut / Math.abs(distOut);
   SmartDashboard.putNumber("encoderErr", encoderErr);
   SmartDashboard.putNumber("distOut", distOut);
   SmartDashboard.putNumber("gyroErr", gyro.getAngle());
   SmartDashboard.putNumber("angleOut", angleOut);
   if (Math.abs(encoderErr) < p.getDouble("DistBuffer", 0.0)
       && Math.abs(gyroErr) < p.getDouble("AngleBuffer", 0.0)) {
     //            leftEncoder.reset();
     //            rightEncoder.reset();
     // gyro.reset();
     // arcadeDrive(0, 0);
     return true; // returns true when robot gets to its goal
   } else {
     arcadeDrive(
         -distOut,
         angleOut); // Gyro kP = 1/18.0; Arcade Drive uses reversed rotate values (neg. goes Left /
     // pos. goes Right)
     return false; // returns false if robot still hasn't reached its goal yet
   }
 } // end driveStraight
コード例 #11
0
 // aligns robot for shooting
 public void alignToShoot(double left, double right) {
   Preferences p = Preferences.getInstance();
   final double kShootLimitVoltage = p.getDouble("DriveTrainShootLimitVoltage", 0.0);
   double maxVoltage = ultraDist.getVoltage();
   for (int i = 0; i < 10; i++) {
     double voltage = ultraDist.getVoltage();
     if (voltage > maxVoltage) {
       maxVoltage = voltage;
     }
   }
   SmartDashboard.putNumber(
       "RangefinderVoltage", maxVoltage); // want to see on competition dashboard!!
   System.out.println(
       "RangefinderVoltage: " + maxVoltage + " kShootLimitVoltage: " + kShootLimitVoltage);
   if (maxVoltage <= kShootLimitVoltage) {
     hasBeenAchieved = true;
   }
   if (left <= 0.0 && hasBeenAchieved) {
     left = 0.0;
   }
   arcadeDrive(left, right);
 } // end alignToShoot
コード例 #12
0
  // Initialize your subsystem here
  public LoaderClimberOld2PID() {
    // BEGIN AUTOGENERATED CODE, SOURCE=ROBOTBUILDER ID=PID
    // super("LoaderClimberOld2PID", 1.5, 0.1, 0.0);
    // setAbsoluteTolerance(0.02);
    // getPIDController().setContinuous(false);

    // END AUTOGENERATED CODE, SOURCE=ROBOTBUILDER ID=PID
    m_preferences = Preferences.getInstance();
    if (leftJag != null) { // for practice robot

      // Fix for motors going in opposite directios
      PIDOutput rightOutput =
          new PIDOutput() {
            public void pidWrite(double output) {
              rightJag.pidWrite(-1 * output);
            }
          };

      pidLeft = new PIDController(P, I, D, leftAngleCh, leftJag); // PID Output Interface
      pidRight = new PIDController(P, I, D, rightAngleCh, rightOutput); // PID Output Interface*/

      LiveWindow.addActuator("LoaderClimber", "PIDLeft Angle Controller", pidLeft);
      LiveWindow.addActuator("LoaderClimber", "PIDLeft Angle Controller", pidRight);

      pidLeft.setSetpoint(m_preferences.getFloat("Retract", 2.4f));
      pidRight.setSetpoint(m_preferences.getFloat("RetractR", 2.4f));

      pidLeft.setInputRange(0, 4);
      pidRight.setInputRange(0, 4);

      pidLeft.setPercentTolerance(PID_TOL);
      pidRight.setPercentTolerance(PID_TOL);

      pidLeft.enable(); // - Enables the PID controller.
      pidRight.enable(); // - Enables the PID controller.
      // disable();

    }
  }
コード例 #13
0
  public boolean quickTurn(double setpoint) {
    // Proportional quickturn algorithm
    Preferences p = Preferences.getInstance();
    final double kP = p.getDouble("DriveTrainQuickTurnP", 0.0);
    final double kDB = p.getDouble("DriveTrainQuickTurnDeadband", 0.0);
    double angle = -getGyro(); // -driveTrain.getGyro() b/c the gyro is upsidedown
    double error = setpoint - angle;
    double twist = error * kP;
    double magnitude = Math.abs(twist);
    if (magnitude < kDB) {
      twist = kDB * (twist > 0.0 ? 1.0 : -1.0);
    } else if (magnitude > 1.0) {
      twist = (twist > 0.0 ? 1.0 : -1.0);
    }

    SmartDashboard.putNumber("DriveTrainGyro", angle);

    leftMotor.set(-twist);
    rightMotor.set(twist);

    // Done once we pass the setpoint
    return Math.abs(angle) >= Math.abs(setpoint);
  } // end quickTurn
コード例 #14
0
 /** Constructor init fields. */
 public Benzene() {
   listeningThread = new ListeningThread(this);
   addController(SpecificRouting.class, defaultRouter);
   preferences = Preferences.getInstance();
 }
コード例 #15
0
  public void showNotifications(List<String> contacts) {
    if (!(ActivityMonitor.getInstance().getCurrentActivity() instanceof ConversationsActivity)) {
      Conversation[] conversations =
          Database.getInstance(applicationContext).getConversations(preferences.getDid());
      for (Conversation conversation : conversations) {
        if (!conversation.isUnread()
            || !contacts.contains(conversation.getContact())
            || (ActivityMonitor.getInstance().getCurrentActivity() instanceof ConversationActivity
                && ((ConversationActivity) ActivityMonitor.getInstance().getCurrentActivity())
                    .getContact()
                    .equals(conversation.getContact()))) {
          continue;
        }

        String smsContact = Utils.getContactName(applicationContext, conversation.getContact());
        if (smsContact == null) {
          smsContact = Utils.getFormattedPhoneNumber(conversation.getContact());
        }

        String allSmses = "";
        String mostRecentSms = "";
        boolean initial = true;
        for (Message message : conversation.getMessages()) {
          if (message.getType() == Message.Type.INCOMING && message.isUnread()) {
            if (initial) {
              allSmses = message.getText();
              mostRecentSms = message.getText();
              initial = false;
            } else {
              allSmses = message.getText() + "\n" + allSmses;
            }
          } else {
            break;
          }
        }

        NotificationCompat.Builder notificationBuilder =
            new NotificationCompat.Builder(applicationContext);

        notificationBuilder.setContentTitle(smsContact);
        notificationBuilder.setContentText(mostRecentSms);
        notificationBuilder.setSmallIcon(R.drawable.ic_chat_white_24dp);
        notificationBuilder.setPriority(Notification.PRIORITY_HIGH);
        notificationBuilder.setSound(
            Uri.parse(Preferences.getInstance(applicationContext).getNotificationSound()));
        notificationBuilder.setLights(0xFFAA0000, 1000, 5000);
        if (Preferences.getInstance(applicationContext).getNotificationVibrateEnabled()) {
          notificationBuilder.setVibrate(new long[] {0, 250, 250, 250});
        } else {
          notificationBuilder.setVibrate(new long[] {0});
        }
        notificationBuilder.setColor(0xFFAA0000);
        notificationBuilder.setAutoCancel(true);
        notificationBuilder.setStyle(new NotificationCompat.BigTextStyle().bigText(allSmses));

        Bitmap largeIconBitmap;
        try {
          largeIconBitmap =
              MediaStore.Images.Media.getBitmap(
                  applicationContext.getContentResolver(),
                  Uri.parse(
                      Utils.getContactPhotoUri(applicationContext, conversation.getContact())));
          largeIconBitmap = Bitmap.createScaledBitmap(largeIconBitmap, 256, 256, false);
          largeIconBitmap = Utils.applyCircularMask(largeIconBitmap);
          notificationBuilder.setLargeIcon(largeIconBitmap);
        } catch (Exception ignored) {

        }

        Intent intent = new Intent(applicationContext, ConversationActivity.class);
        intent.setFlags(Intent.FLAG_ACTIVITY_CLEAR_TOP);
        intent.putExtra(
            applicationContext.getString(R.string.conversation_extra_contact),
            conversation.getContact());
        TaskStackBuilder stackBuilder = TaskStackBuilder.create(applicationContext);
        stackBuilder.addParentStack(ConversationActivity.class);
        stackBuilder.addNextIntent(intent);
        notificationBuilder.setContentIntent(
            stackBuilder.getPendingIntent(0, PendingIntent.FLAG_CANCEL_CURRENT));

        Intent replyIntent = new Intent(applicationContext, ConversationQuickReplyActivity.class);
        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.LOLLIPOP) {
          replyIntent.setFlags(Intent.FLAG_ACTIVITY_NEW_DOCUMENT);
        } else {
          //noinspection deprecation
          replyIntent.setFlags(Intent.FLAG_ACTIVITY_CLEAR_WHEN_TASK_RESET);
        }
        replyIntent.putExtra(
            applicationContext.getString(R.string.conversation_extra_contact),
            conversation.getContact());
        PendingIntent replyPendingIntent =
            PendingIntent.getActivity(
                applicationContext, 0, replyIntent, PendingIntent.FLAG_CANCEL_CURRENT);
        NotificationCompat.Action.Builder replyAction =
            new NotificationCompat.Action.Builder(
                R.drawable.ic_reply_white_24dp,
                applicationContext.getString(R.string.notifications_button_reply),
                replyPendingIntent);
        notificationBuilder.addAction(replyAction.build());

        Intent markAsReadIntent = new Intent(applicationContext, MarkAsReadReceiver.class);
        markAsReadIntent.putExtra(
            applicationContext.getString(R.string.conversation_extra_contact),
            conversation.getContact());
        PendingIntent markAsReadPendingIntent =
            PendingIntent.getBroadcast(
                applicationContext, 0, markAsReadIntent, PendingIntent.FLAG_CANCEL_CURRENT);
        NotificationCompat.Action.Builder markAsReadAction =
            new NotificationCompat.Action.Builder(
                R.drawable.ic_drafts_white_24dp,
                applicationContext.getString(R.string.notifications_button_mark_read),
                markAsReadPendingIntent);
        notificationBuilder.addAction(markAsReadAction.build());

        int id;
        if (notificationIds.get(conversation.getContact()) != null) {
          id = notificationIds.get(conversation.getContact());
        } else {
          id = notificationIdCount++;
          notificationIds.put(conversation.getContact(), id);
        }
        NotificationManager notificationManager =
            (NotificationManager) applicationContext.getSystemService(Context.NOTIFICATION_SERVICE);
        notificationManager.notify(id, notificationBuilder.build());
      }
    }
  }
コード例 #16
0
ファイル: LightCalendar.java プロジェクト: LICEF/lompad
  public void paint(Graphics g) {
    int width = getSize().width;
    int height = getSize().height;

    offImage = createImage(width, height);
    offGraphics = offImage.getGraphics();

    offGraphics.setFont(font);
    fm = offGraphics.getFontMetrics(font);

    int xPen = 0;
    int yPen = 0;

    DateFormatSymbols dfs = new DateFormatSymbols(Preferences.getInstance().getLocale());

    // Nom du mois
    if (drawMonthName) {
      String strMonthName =
          StringUtil.capitalize(dfs.getMonths()[mois]) + ", " + new Integer(annee).toString();

      offGraphics.setColor(BG_MONTH_NAME);
      offGraphics.fillRect(xPen, yPen, (width - 1), fm.getHeight() + 2);
      offGraphics.setColor(FG_MONTH_NAME);
      offGraphics.drawString(strMonthName, xPen + 5, fm.getHeight());
      yPen += fm.getHeight() + 2;
    }

    int caseWidth = (width - 2) / 7;

    // Nom des jours
    offGraphics.setColor(BG_DAY_NAME);
    offGraphics.fillRect(1, yPen, width - 2, fm.getHeight() + 5);

    offGraphics.setColor(FG_DAY_NAME);
    for (int i = 1; i <= 7; i++) {
      String strNomJour = StringUtil.capitalize(dfs.getWeekdays()[i].substring(0, 1));

      int x = 1 + (i - 1) * caseWidth + (caseWidth - fm.stringWidth(strNomJour)) / 2;
      int y = yPen + fm.getHeight() - 1;
      offGraphics.drawString(strNomJour, x, y);
    }
    yPen += fm.getHeight() + 5;

    // Cases des jours
    Rectangle r = new Rectangle(1, yPen, width - 2, height - yPen - 1);

    offGraphics.setFont(font);
    fm = offGraphics.getFontMetrics(font);

    offGraphics.setColor(BG_DAY);
    offGraphics.fillRect(r.x, r.y, r.width, r.height);

    int caseHeight = r.height / 7;
    Calendar cal = Calendar.getInstance();
    cal.setTime(dateDebutMois);

    int nbJoursVides = cal.get(Calendar.DAY_OF_WEEK) - 1;
    int iJoursVides = 0;
    // int iJour = 1;

    yPen += 3;

    for (int iRow = 0; iRow < 6; iRow++) {
      for (int iCol = 0; iCol < 7; iCol++) {
        int day = cal.get(Calendar.DATE);
        if (iJoursVides < nbJoursVides) iJoursVides++;
        else if (cal.get(Calendar.MONTH) == mois) {
          String strDay = (new Integer(day)).toString();
          int xCase = 3 + (iCol * caseWidth);
          int yCase = yPen + (iRow * caseHeight);
          int x = xCase + (caseWidth - fm.stringWidth(strDay)) / 2;
          // int     y = yCase + ( caseHeight - fm.getHeight() ) / 2 + fm.getHeight();
          int y = yCase + (caseHeight - fm.getHeight()) / 2 + fm.getHeight() - 2;

          offGraphics.setFont(font);
          offGraphics.setColor(FG_DAY);

          // Selection
          if ((iRow == selectedRow) && (iCol == selectedCol)) {
            offGraphics.setColor(SELECTION_COLOR);
            offGraphics.drawRect(xCase + 2, yCase + 1, caseWidth - 4, caseHeight);
            offGraphics.setColor(FG_DAY);
          }

          offGraphics.drawString(strDay, x, y);

          int dayTemp = cal.get(Calendar.DATE);
          cal.add(Calendar.DATE, 1);
          while (cal.get(Calendar.DATE) == dayTemp) {
            // Cette boucle inefficace est la pour contrer le probleme de l'heure avancee
            cal.add(Calendar.MINUTE, 1);
          }
        }
      }
    }

    // Cadre
    offGraphics.setColor(Color.black);
    offGraphics.drawRect(0, 0, width - 1, height - 6);

    g.drawImage(offImage, 0, 5, null);
  }