/**
* Creates the levels higher than the given level
*
* @param boundablesOfALevel the level to build on
* @param level the level of the Boundables, or -1 if the boundables are item boundables (that is,
* below level 0)
* @return the root, which may be a ParentNode or a LeafNode
*/
private AbstractNode createHigherLevels(List boundablesOfALevel, int level) {
Assert.isTrue(!boundablesOfALevel.isEmpty());
List parentBoundables = createParentBoundables(boundablesOfALevel, level + 1);
if (parentBoundables.size() == 1) {
return (AbstractNode) parentBoundables.get(0);
}
return createHigherLevels(parentBoundables, level + 1);
}
private static Geometry convertSegStrings(Iterator it) {
GeometryFactory fact = new GeometryFactory();
List lines = new ArrayList();
while (it.hasNext()) {
SegmentString ss = (SegmentString) it.next();
LineString line = fact.createLineString(ss.getCoordinates());
lines.add(line);
}
return fact.buildGeometry(lines);
}
public void findEdge(List dirEdgeList) {
/**
* Check all forward DirectedEdges only. This is still general, because each edge has a forward
* DirectedEdge.
*/
for (Iterator i = dirEdgeList.iterator(); i.hasNext(); ) {
DirectedEdge de = (DirectedEdge) i.next();
if (!de.isForward()) continue;
checkForRightmostCoordinate(de);
}
/**
* If the rightmost point is a node, we need to identify which of the incident edges is
* rightmost.
*/
Assert.isTrue(
minIndex != 0 || minCoord.equals(minDe.getCoordinate()),
"inconsistency in rightmost processing");
if (minIndex == 0) {
findRightmostEdgeAtNode();
} else {
findRightmostEdgeAtVertex();
}
/** now check that the extreme side is the R side. If not, use the sym instead. */
orientedDe = minDe;
int rightmostSide = getRightmostSide(minDe, minIndex);
if (rightmostSide == Position.LEFT) {
orientedDe = minDe.getSym();
}
}
private void query(Object searchBounds, AbstractNode node, ItemVisitor visitor) {
List childBoundables = node.getChildBoundables();
for (int i = 0; i < childBoundables.size(); i++) {
Boundable childBoundable = (Boundable) childBoundables.get(i);
if (!getIntersectsOp().intersects(childBoundable.getBounds(), searchBounds)) {
continue;
}
if (childBoundable instanceof AbstractNode) {
query(searchBounds, (AbstractNode) childBoundable, visitor);
} else if (childBoundable instanceof ItemBoundable) {
visitor.visitItem(((ItemBoundable) childBoundable).getItem());
} else {
Assert.shouldNeverReachHere();
}
}
}
private List itemsTree(AbstractNode node) {
List valuesTreeForNode = new ArrayList();
for (Iterator i = node.getChildBoundables().iterator(); i.hasNext(); ) {
Boundable childBoundable = (Boundable) i.next();
if (childBoundable instanceof AbstractNode) {
List valuesTreeForChild = itemsTree((AbstractNode) childBoundable);
// only add if not null (which indicates an item somewhere in this tree
if (valuesTreeForChild != null) valuesTreeForNode.add(valuesTreeForChild);
} else if (childBoundable instanceof ItemBoundable) {
valuesTreeForNode.add(((ItemBoundable) childBoundable).getItem());
} else {
Assert.shouldNeverReachHere();
}
}
if (valuesTreeForNode.size() <= 0) return null;
return valuesTreeForNode;
}
public Geometry buffer(Geometry g, double distance) {
PrecisionModel precisionModel = workingPrecisionModel;
if (precisionModel == null) precisionModel = g.getPrecisionModel();
// factory must be the same as the one used by the input
geomFact = g.getFactory();
OffsetCurveBuilder curveBuilder = new OffsetCurveBuilder(precisionModel, bufParams);
OffsetCurveSetBuilder curveSetBuilder = new OffsetCurveSetBuilder(g, distance, curveBuilder);
List bufferSegStrList = curveSetBuilder.getCurves();
// short-circuit test
if (bufferSegStrList.size() <= 0) {
return createEmptyResultGeometry();
}
// BufferDebug.runCount++;
// String filename = "run" + BufferDebug.runCount + "_curves";
// System.out.println("saving " + filename);
// BufferDebug.saveEdges(bufferEdgeList, filename);
// DEBUGGING ONLY
// WKTWriter wktWriter = new WKTWriter();
// Debug.println("Rings: " + wktWriter.write(convertSegStrings(bufferSegStrList.iterator())));
// wktWriter.setMaxCoordinatesPerLine(10);
// System.out.println(wktWriter.writeFormatted(convertSegStrings(bufferSegStrList.iterator())));
computeNodedEdges(bufferSegStrList, precisionModel);
graph = new PlanarGraph(new OverlayNodeFactory());
graph.addEdges(edgeList.getEdges());
List subgraphList = createSubgraphs(graph);
PolygonBuilder polyBuilder = new PolygonBuilder(geomFact);
buildSubgraphs(subgraphList, polyBuilder);
List resultPolyList = polyBuilder.getPolygons();
// just in case...
if (resultPolyList.size() <= 0) {
return createEmptyResultGeometry();
}
Geometry resultGeom = geomFact.buildGeometry(resultPolyList);
return resultGeom;
}
private List createSubgraphs(PlanarGraph graph) {
List subgraphList = new ArrayList();
for (Iterator i = graph.getNodes().iterator(); i.hasNext(); ) {
Node node = (Node) i.next();
if (!node.isVisited()) {
BufferSubgraph subgraph = new BufferSubgraph();
subgraph.create(node);
subgraphList.add(subgraph);
}
}
/**
* Sort the subgraphs in descending order of their rightmost coordinate. This ensures that when
* the Polygons for the subgraphs are built, subgraphs for shells will have been built before
* the subgraphs for any holes they contain.
*/
Collections.sort(subgraphList, Collections.reverseOrder());
return subgraphList;
}
/**
* Completes the building of the input subgraphs by depth-labelling them, and adds them to the
* PolygonBuilder. The subgraph list must be sorted in rightmost-coordinate order.
*
* @param subgraphList the subgraphs to build
* @param polyBuilder the PolygonBuilder which will build the final polygons
*/
private void buildSubgraphs(List subgraphList, PolygonBuilder polyBuilder) {
List processedGraphs = new ArrayList();
for (Iterator i = subgraphList.iterator(); i.hasNext(); ) {
BufferSubgraph subgraph = (BufferSubgraph) i.next();
Coordinate p = subgraph.getRightmostCoordinate();
// int outsideDepth = 0;
// if (polyBuilder.containsPoint(p))
// outsideDepth = 1;
SubgraphDepthLocater locater = new SubgraphDepthLocater(processedGraphs);
int outsideDepth = locater.getDepth(p);
// try {
subgraph.computeDepth(outsideDepth);
// }
// catch (RuntimeException ex) {
// // debugging only
// //subgraph.saveDirEdges();
// throw ex;
// }
subgraph.findResultEdges();
processedGraphs.add(subgraph);
polyBuilder.add(subgraph.getDirectedEdges(), subgraph.getNodes());
}
}
/**
* Sorts the childBoundables then divides them into groups of size M, where M is the node
* capacity.
*/
protected List createParentBoundables(List childBoundables, int newLevel) {
Assert.isTrue(!childBoundables.isEmpty());
ArrayList parentBoundables = new ArrayList();
parentBoundables.add(createNode(newLevel));
ArrayList sortedChildBoundables = new ArrayList(childBoundables);
Collections.sort(sortedChildBoundables, getComparator());
for (Iterator i = sortedChildBoundables.iterator(); i.hasNext(); ) {
Boundable childBoundable = (Boundable) i.next();
if (lastNode(parentBoundables).getChildBoundables().size() == getNodeCapacity()) {
parentBoundables.add(createNode(newLevel));
}
lastNode(parentBoundables).addChildBoundable(childBoundable);
}
return parentBoundables;
}
protected AbstractNode lastNode(List nodes) {
return (AbstractNode) nodes.get(nodes.size() - 1);
}