/** Gets the number of tiles */
public int getNumTiles() {
Rectangle sourceRegion = getSourceRegion();
if (sourceRegion == null) {
if (imgsrc != null)
sourceRegion =
new Rectangle(
imgsrc.getMinX(), imgsrc.getMinY(), imgsrc.getWidth(), imgsrc.getHeight());
else sourceRegion = raster.getBounds();
} else {
if (imgsrc != null)
sourceRegion =
sourceRegion.intersection(
new Rectangle(
imgsrc.getMinX(), imgsrc.getMinY(), imgsrc.getWidth(), imgsrc.getHeight()));
else sourceRegion = sourceRegion.intersection(raster.getBounds());
}
int scaleX = getSourceXSubsampling();
int scaleY = getSourceYSubsampling();
int xOffset = getSubsamplingXOffset();
int yOffset = getSubsamplingYOffset();
int w = (sourceRegion.width - xOffset + scaleX - 1) / scaleX;
int h = (sourceRegion.height - yOffset + scaleY - 1) / scaleY;
minX = (sourceRegion.x + xOffset) / scaleX;
minY = (sourceRegion.y + yOffset) / scaleY;
numTiles =
(int)
((Math.floor((minX + w + tileWidth - 1.0) / tileWidth)
- Math.floor((double) minX / tileWidth))
* (Math.floor((minY + h + tileHeight - 1.0) / tileHeight)
- Math.floor((double) minY / tileHeight)));
tileGridXOffset += (minX - tileGridXOffset) / tileWidth * tileWidth;
tileGridYOffset += (minY - tileGridYOffset) / tileHeight * tileHeight;
return numTiles;
}
/**
* Returns the maximum number of magnitude bits in any subband in the given tile-component if
* derived quantization is used
*
* @param sb The root of the subband tree of the tile-component
* @param t Tile index
* @param c Component index
* @return The highest number of magnitude bit-planes
*/
private int getMaxMagBitsDerived(Subband sb, int t, int c) {
int tmp, max = 0;
int g = ((Integer) gbs.getTileCompVal(t, c)).intValue();
if (!sb.isNode) {
float baseStep = ((Float) qsss.getTileCompVal(t, c)).floatValue();
return g - 1 + sb.level - (int) Math.floor(Math.log(baseStep) / log2);
}
max = getMaxMagBitsDerived(sb.getLL(), t, c);
tmp = getMaxMagBitsDerived(sb.getLH(), t, c);
if (tmp > max) max = tmp;
tmp = getMaxMagBitsDerived(sb.getHL(), t, c);
if (tmp > max) max = tmp;
tmp = getMaxMagBitsDerived(sb.getHH(), t, c);
if (tmp > max) max = tmp;
return max;
}
/**
* Returns the maximum number of magnitude bits in any subband in the given tile-component if
* expounded quantization is used
*
* @param sb The root of the subband tree of the tile-component
* @param t Tile index
* @param c Component index
* @return The highest number of magnitude bit-planes
*/
private int getMaxMagBitsExpounded(Subband sb, int t, int c) {
int tmp, max = 0;
int g = ((Integer) gbs.getTileCompVal(t, c)).intValue();
if (!sb.isNode) {
float baseStep = ((Float) qsss.getTileCompVal(t, c)).floatValue();
return g
- 1
- (int)
Math.floor(
Math.log(baseStep / (((SubbandAn) sb).l2Norm * (1 << sb.anGainExp))) / log2);
}
max = getMaxMagBitsExpounded(sb.getLL(), t, c);
tmp = getMaxMagBitsExpounded(sb.getLH(), t, c);
if (tmp > max) max = tmp;
tmp = getMaxMagBitsExpounded(sb.getHL(), t, c);
if (tmp > max) max = tmp;
tmp = getMaxMagBitsExpounded(sb.getHH(), t, c);
if (tmp > max) max = tmp;
return max;
}
/**
* Returns the next code-block in the current tile for the specified component. The order in which
* code-blocks are returned is not specified. However each code-block is returned only once and
* all code-blocks will be returned if the method is called 'N' times, where 'N' is the number of
* code-blocks in the tile. After all the code-blocks have been returned for the current tile
* calls to this method will return 'null'.
*
* <p>When changing the current tile (through 'setTile()' or 'nextTile()') this method will always
* return the first code-block, as if this method was never called before for the new current
* tile.
*
* <p>The data returned by this method can be the data in the internal buffer of this object, if
* any, and thus can not be modified by the caller. The 'offset' and 'scanw' of the returned data
* can be arbitrary. See the 'CBlkWTData' class.
*
* <p>The 'ulx' and 'uly' members of the returned 'CBlkWTData' object contain the coordinates of
* the top-left corner of the block, with respect to the tile, not the subband.
*
* @param c The component for which to return the next code-block.
* @param cblk If non-null this object will be used to return the new code-block. If null a new
* one will be allocated and returned. If the "data" array of the object is non-null it will
* be reused, if possible, to return the data.
* @return The next code-block in the current tile for component 'n', or null if all code-blocks
* for the current tile have been returned.
* @see CBlkWTData
*/
public final CBlkWTData getNextInternCodeBlock(int c, CBlkWTData cblk) {
// NOTE: this method is declared final since getNextCodeBlock() relies
// on this particular implementation
int k, j;
int tmp, shiftBits, jmin;
int w, h;
int outarr[];
float infarr[] = null;
CBlkWTDataFloat infblk;
float invstep; // The inverse of the quantization step size
boolean intq; // flag for quantizig ints
SubbandAn sb;
float stepUDR; // The quantization step size (for a dynamic
// range of 1, or unit)
int g = ((Integer) gbs.getTileCompVal(tIdx, c)).intValue();
// Are we quantizing ints or floats?
intq = (src.getDataType(tIdx, c) == DataBlk.TYPE_INT);
// Check that we have an output object
if (cblk == null) {
cblk = new CBlkWTDataInt();
}
// Cache input float code-block
infblk = this.infblk;
// Get data to quantize. When quantizing int data 'cblk' is used to
// get the data to quantize and to return the quantized data as well,
// that's why 'getNextCodeBlock()' is used. This can not be done when
// quantizing float data because of the different data types, that's
// why 'getNextInternCodeBlock()' is used in that case.
if (intq) { // Source data is int
cblk = src.getNextCodeBlock(c, cblk);
if (cblk == null) {
return null; // No more code-blocks in current tile for comp.
}
// Input and output arrays are the same (for "in place" quant.)
outarr = (int[]) cblk.getData();
} else { // Source data is float
// Can not use 'cblk' to get float data, use 'infblk'
infblk = (CBlkWTDataFloat) src.getNextInternCodeBlock(c, infblk);
if (infblk == null) {
// Release buffer from infblk: this enables to garbage collect
// the big buffer when we are done with last code-block of
// component.
this.infblk.setData(null);
return null; // No more code-blocks in current tile for comp.
}
this.infblk = infblk; // Save local cache
infarr = (float[]) infblk.getData();
// Get output data array and check that there is memory to put the
// quantized coeffs in
outarr = (int[]) cblk.getData();
if (outarr == null || outarr.length < infblk.w * infblk.h) {
outarr = new int[infblk.w * infblk.h];
cblk.setData(outarr);
}
cblk.m = infblk.m;
cblk.n = infblk.n;
cblk.sb = infblk.sb;
cblk.ulx = infblk.ulx;
cblk.uly = infblk.uly;
cblk.w = infblk.w;
cblk.h = infblk.h;
cblk.wmseScaling = infblk.wmseScaling;
cblk.offset = 0;
cblk.scanw = cblk.w;
}
// Cache width, height and subband of code-block
w = cblk.w;
h = cblk.h;
sb = cblk.sb;
if (isReversible(tIdx, c)) { // Reversible only for int data
cblk.magbits = g - 1 + src.getNomRangeBits(c) + sb.anGainExp;
shiftBits = 31 - cblk.magbits;
// Update the convertFactor field
cblk.convertFactor = (1 << shiftBits);
// Since we used getNextCodeBlock() to get the int data then
// 'offset' is 0 and 'scanw' is the width of the code-block The
// input and output arrays are the same (i.e. "in place")
for (j = w * h - 1; j >= 0; j--) {
tmp = (outarr[j] << shiftBits);
outarr[j] = ((tmp < 0) ? (1 << 31) | (-tmp) : tmp);
}
} else { // Non-reversible, use step size
float baseStep = ((Float) qsss.getTileCompVal(tIdx, c)).floatValue();
// Calculate magnitude bits and quantization step size
if (isDerived(tIdx, c)) {
cblk.magbits = g - 1 + sb.level - (int) Math.floor(Math.log(baseStep) / log2);
stepUDR = baseStep / (1 << sb.level);
} else {
cblk.magbits =
g - 1 - (int) Math.floor(Math.log(baseStep / (sb.l2Norm * (1 << sb.anGainExp))) / log2);
stepUDR = baseStep / (sb.l2Norm * (1 << sb.anGainExp));
}
shiftBits = 31 - cblk.magbits;
// Calculate step that decoder will get and use that one.
stepUDR = convertFromExpMantissa(convertToExpMantissa(stepUDR));
invstep = 1.0f / ((1L << (src.getNomRangeBits(c) + sb.anGainExp)) * stepUDR);
// Normalize to magnitude bits (output fractional point)
invstep *= (1 << (shiftBits - src.getFixedPoint(c)));
// Update convertFactor and stepSize fields
cblk.convertFactor = invstep;
cblk.stepSize = ((1L << (src.getNomRangeBits(c) + sb.anGainExp)) * stepUDR);
if (intq) { // Quantizing int data
// Since we used getNextCodeBlock() to get the int data then
// 'offset' is 0 and 'scanw' is the width of the code-block
// The input and output arrays are the same (i.e. "in place")
for (j = w * h - 1; j >= 0; j--) {
tmp = (int) (outarr[j] * invstep);
outarr[j] = ((tmp < 0) ? (1 << 31) | (-tmp) : tmp);
}
} else { // Quantizing float data
for (j = w * h - 1, k = infblk.offset + (h - 1) * infblk.scanw + w - 1, jmin = w * (h - 1);
j >= 0;
jmin -= w) {
for (; j >= jmin; k--, j--) {
tmp = (int) (infarr[k] * invstep);
outarr[j] = ((tmp < 0) ? (1 << 31) | (-tmp) : tmp);
}
// Jump to beggining of previous line in input
k -= infblk.scanw - w;
}
}
}
// Return the quantized code-block
return cblk;
}