Example #1
0
 /**
  * Changes the tooltip of this {@link NodeContentPart} to the given value.
  *
  * @param visual The visual of this {@link NodeContentPart}.
  * @param tooltip The new tooltip for this {@link NodeContentPart}.
  */
 protected void refreshTooltip(Group visual, Object tooltip) {
   if (tooltip instanceof String) {
     if (tooltipNode == null) {
       tooltipNode = new Tooltip((String) tooltip);
       Tooltip.install(visual, tooltipNode);
     } else {
       tooltipNode.setText((String) tooltip);
     }
   }
 }
 private void addRatingListenerToTooltip(FloatProperty ratingProperty, Tooltip tooltip) {
   ratingProperty.addListener(
       (observable, oldValue, newValue) -> {
         String updatedRating =
             i18n.get(
                 "userInfo.ratingFormat",
                 RatingUtil.getGlobalRating(playerInfoBean),
                 RatingUtil.getLeaderboardRating(playerInfoBean));
         tooltip.setText(updatedRating);
       });
 }
Example #3
0
 private void handleEvents(final String EVENT_TYPE) {
   if ("RESIZE".equals(EVENT_TYPE)) {
     resize();
     redraw();
   } else if ("REDRAW".equals(EVENT_TYPE)) {
     redraw();
   } else if ("RECALC".equals(EVENT_TYPE)) {
     angleRange = Helper.clamp(90.0, 180.0, getSkinnable().getAngleRange());
     startAngle = getStartAngle();
     minValue = getSkinnable().getMinValue();
     range = getSkinnable().getRange();
     sections = getSkinnable().getSections();
     angleStep = angleRange / range;
     redraw();
   } else if ("FINISHED".equals(EVENT_TYPE)) {
     needleTooltip.setText(String.format(locale, formatString, getSkinnable().getValue()));
     double value = getSkinnable().getValue();
     if (getSkinnable().isValueVisible()) {
       Bounds bounds = pane.localToScreen(pane.getBoundsInLocal());
       double xFactor = value > getSkinnable().getRange() * 0.8 ? 0.0 : 0.25;
       double tooltipAngle = value * angleStep;
       double sinValue = Math.sin(Math.toRadians(180 + angleRange * 0.5 - tooltipAngle));
       double cosValue = Math.cos(Math.toRadians(180 + angleRange * 0.5 - tooltipAngle));
       double needleTipX =
           bounds.getMinX() + bounds.getWidth() * 0.5 + bounds.getHeight() * sinValue;
       double needleTipY =
           bounds.getMinY() + bounds.getHeight() * 0.72 + bounds.getHeight() * cosValue;
       needleTooltip.show(needle, needleTipX, needleTipY);
       needleTooltip.setAnchorX(needleTooltip.getX() - needleTooltip.getWidth() * xFactor);
     }
     if (sections.isEmpty() || sectionsAlwaysVisible) return;
     for (Section section : sections) {
       if (section.contains(value)) {
         barTooltip.setText(section.getText());
         break;
       }
     }
   } else if ("VISIBILITY".equals(EVENT_TYPE)) {
     Helper.enableNode(titleText, !getSkinnable().getTitle().isEmpty());
   }
 }
  private void configureRatingTooltip() {
    if (!playerInfoBean.getChatOnly()) {
      Tooltip userRatingTooltip = new Tooltip();

      String rating =
          i18n.get(
              "userInfo.ratingFormat",
              RatingUtil.getRoundedGlobalRating(playerInfoBean),
              RatingUtil.getLeaderboardRating(playerInfoBean));
      userRatingTooltip.setText(rating);

      addRatingListenerToTooltip(playerInfoBean.leaderboardRatingMeanProperty(), userRatingTooltip);
      addRatingListenerToTooltip(playerInfoBean.globalRatingMeanProperty(), userRatingTooltip);

      Tooltip.install(clanLabel, userRatingTooltip);
      Tooltip.install(usernameLabel, userRatingTooltip);
    }
  }
  @Override
  protected void updateItem(IlliquidMainSalesStatusBean item, boolean empty) {
    super.updateItem(item, empty);
    if ((!isEmpty()) && (item != null)) {
      StringBuilder tooltext = new StringBuilder();
      HBox hb = new HBox();
      hb.setAlignment(Pos.CENTER);
      VBox vb = new VBox();
      vb.setAlignment(Pos.CENTER);

      double totalCount =
          item.getCountTvr() + item.getDays30sale() + item.getDays60sale() + item.getDays90sale();
      double proc30;
      double proc60;
      double proc90;
      if (totalCount > 0) {
        proc30 = item.getDays30sale() / totalCount;
        proc60 = item.getDays60sale() / totalCount;
        proc90 = item.getDays90sale() / totalCount;
      } else {
        proc30 = 1;
        proc60 = 1;
        proc90 = 1;
      }

      if (proc30 == 0) {
        hb.getChildren().add(new ImageView(imEmpty));
        vb.getChildren().add(new ImageView(imEmpty));
      } else if (proc30 < 0.10) {
        hb.getChildren().add(new ImageView(imRed));
        vb.getChildren().add(new ImageView(imRed));
      } else if (proc30 >= 0.10 && proc30 < 0.30) {
        hb.getChildren().add(new ImageView(imYelow));
        vb.getChildren().add(new ImageView(imYelow));
      } else if (proc30 >= 0.30) {
        hb.getChildren().add(new ImageView(imGreen));
        vb.getChildren().add(new ImageView(imGreen));
      }
      tooltext
          .append("1 міс. {")
          .append(DateConverters.getDateToStr(per30From))
          .append(" - ")
          .append(DateConverters.getDateToStr(now))
          .append("}:  ")
          .append(String.format("%.2f", proc30 * 100))
          .append("%\n");

      if (proc60 == 0) {
        hb.getChildren().add(new ImageView(imEmpty));
        vb.getChildren().add(new ImageView(imEmpty));
      } else if (proc60 < 0.10) {
        hb.getChildren().add(new ImageView(imRed));
        vb.getChildren().add(new ImageView(imRed));
      } else if (proc60 >= 0.10 && proc60 < 0.30) {
        hb.getChildren().add(new ImageView(imYelow));
        vb.getChildren().add(new ImageView(imYelow));
      } else if (proc60 >= 0.30) {
        hb.getChildren().add(new ImageView(imGreen));
        vb.getChildren().add(new ImageView(imGreen));
      }
      tooltext
          .append("2 міс. {")
          .append(DateConverters.getDateToStr(per60From))
          .append(" - ")
          .append(DateConverters.getDateToStr(per30From))
          .append("}:  ")
          .append(String.format("%.2f", proc60 * 100))
          .append("%\n");

      if (proc90 == 0) {
        hb.getChildren().add(new ImageView(imEmpty));
        vb.getChildren().add(new ImageView(imEmpty));
      } else if (proc90 < 0.10) {
        hb.getChildren().add(new ImageView(imRed));
        vb.getChildren().add(new ImageView(imRed));
      } else if (proc90 >= 0.10 && proc90 < 0.30) {
        hb.getChildren().add(new ImageView(imYelow));
        vb.getChildren().add(new ImageView(imYelow));
      } else if (proc90 >= 0.30) {
        hb.getChildren().add(new ImageView(imGreen));
        vb.getChildren().add(new ImageView(imGreen));
      }
      tooltext
          .append("3 міс. {")
          .append(DateConverters.getDateToStr(per90From))
          .append(" - ")
          .append(DateConverters.getDateToStr(per60From))
          .append("}:  ")
          .append(String.format("%.2f", proc90 * 100))
          .append("%");
      tooltip.setText(tooltext.toString());
      tooltip.setGraphic(vb);
      setTooltip(tooltip);
      setGraphic(hb);
    } else {
      setGraphic(null);
    }
  }
 public void resetAvatarAttributes() {
   tooltip.setText(toString());
 } // Note: This updates the text in the Tooltip that was installed earlier. We re-use the
Example #7
0
  @Override
  public void start(Stage primaryStage) {

    final boolean closable = false;

    final Tab titleTab = new Tab("", new TitlePane());
    titleTab.setStyle(style);
    titleTab.setClosable(closable);

    /** ******** Run Tab ********* */
    final Tab runZonesTab = new Tab("Run Zones", new RunThresholdPane());
    runZonesTab.setClosable(closable);
    final Tab runPacesTab = new Tab("Run Paces", new RunPacesPane());
    runPacesTab.setClosable(closable);
    final Tab runEstimatesTab =
        new Tab("Estimates", new RunEstimatesPane(ModelUtil.newEstimatesModel()));
    runEstimatesTab.setClosable(closable);
    final Tab runVDotTab = new Tab("VDot");
    runVDotTab.setClosable(closable);
    runVDotTab.setDisable(true);
    final TabPane runTabs = new TabPane();
    runTabs.getTabs().addAll(runZonesTab, runPacesTab, runEstimatesTab, runVDotTab);
    final Tab runToolsTab = new Tab("Run Tools", runTabs);
    runToolsTab.setClosable(closable);

    /** ******** Bike Tab ********* */
    final Tab bikeZonesTab = new Tab("Bike Zones", new BikeThresholdPane());
    bikeZonesTab.setClosable(closable);
    final Tab bikePowerTab = new Tab("Power Zones", new BikePowerPane());
    bikePowerTab.setClosable(closable);
    final Tab bikeAerodynamicsTab = new Tab("Aerodynamics", new AerodynamicsPane());
    bikeAerodynamicsTab.setClosable(closable);
    final Tab bikeGearRatioTab = new Tab("Gear Ratio", new GearsPane());
    bikeGearRatioTab.setClosable(closable);
    final Tab bikeTimeSavingsTab = new Tab("Time Savings", new TimeSavingsPane());
    bikeTimeSavingsTab.setClosable(closable);
    final TabPane bikeTabs =
        new TabPane(bikeZonesTab, bikePowerTab, bikeAerodynamicsTab, bikeGearRatioTab);
    final Tab bikeToolsTab = new Tab("Bike Tools", bikeTabs);
    bikeToolsTab.setClosable(false);

    /** ******** Swim Tab ********* */
    final Tab swimCSSTab = new Tab("CSS", new CSSPane(ModelUtil.newCSSMOdel()));
    swimCSSTab.setClosable(closable);
    final Tab swimEstimatesTab =
        new Tab("Estimates", new SwimEstimatesPane(ModelUtil.newEstimatesModel()));
    swimEstimatesTab.setClosable(closable);
    final TabPane swimTabs = new TabPane();
    swimTabs.getTabs().addAll(swimCSSTab, swimEstimatesTab);
    Tab swimToolsTab = new Tab("Swim Tools", swimTabs);
    swimToolsTab.setClosable(false);

    /** ******** Utils Tab ********* */
    final Tab progressionTab =
        new Tab("Progression", new ProgressionPane(ProgressionModel.newInstance()));
    progressionTab.setClosable(false);

    final ContextMenu progressionContextMenu = new ContextMenu();
    progressionContextMenu.setOnShowing(e -> System.out.println("Showing: " + e));
    progressionContextMenu.setOnShown(e -> System.out.println("Shown: " + e));
    MenuItem progressionMenuItem1 = new MenuItem();
    progressionMenuItem1.setText("About");
    progressionMenuItem1.setOnAction(e -> System.out.println("About: " + e));
    MenuItem progressionMenuItem2 = new MenuItem();
    progressionMenuItem2.setText("...");
    progressionMenuItem2.setOnAction(e -> System.out.println(": " + e));
    progressionContextMenu.getItems().addAll(progressionMenuItem1, progressionMenuItem2);
    progressionTab.setContextMenu(progressionContextMenu);

    final Tab scheduleTab = new Tab("Schedule");
    scheduleTab.setClosable(false);
    scheduleTab.setDisable(true);

    final Tab rpeTab = new Tab("RPE", new RPETextPane());
    rpeTab.setClosable(false);

    final Tooltip progressionTooltip = new Tooltip();
    progressionTooltip.setText("Calculates progression times in number of weeks");
    progressionTab.setTooltip(progressionTooltip);
    progressionTooltip.setOnShowing(e -> System.out.println("Progression Tooltip: " + e));
    progressionTooltip.setOnShown(e -> System.out.println("Progression Tooltip: " + e));

    final TabPane utilTabPane = new TabPane(scheduleTab, rpeTab, progressionTab);

    final Tab utilTab = new Tab("Utils", utilTabPane);
    utilTab.setClosable(false);
    final Tooltip utilTooltip = new Tooltip();
    utilTab.setTooltip(utilTooltip);
    utilTooltip.setText("Helpful utilities for workouts");

    /* Create main tab menu */
    TabPane root = new TabPane();
    root.setSide(Side.LEFT);
    root.getTabs().addAll(titleTab, runToolsTab, bikeToolsTab, swimToolsTab, utilTab);

    Scene scene = new Scene(root, 800, 500);
    scene.getStylesheets().add(STYLESHEET_PATH);

    primaryStage.setResizable(false);
    primaryStage.setTitle("Tri App");
    primaryStage.setScene(scene);
    primaryStage.show();
  }
Example #8
0
  @Override
  public void start(Stage primaryStage) {

    primaryStage.setTitle("PolyStar 1.0 ");

    GridPane grid = new GridPane();
    // grid.setAlignment(Pos.CENTER);
    grid.setHgap(6);
    grid.setVgap(6);
    grid.setPadding(new Insets(15, 15, 15, 15));
    // grid.setAlignment(Pos.TOP_RIGHT);

    Text scenetitle = new Text("PolyStar 1.0 (Hover for tool tips)");
    scenetitle.setFont(Font.font("Tahoma", FontWeight.NORMAL, 16));
    grid.add(scenetitle, 0, 0, 2, 1);

    Label mainLbl = new Label("PolyStar polytropic stellar interior structure modeling");
    mainLbl.setFont(Font.font("Tahoma", FontWeight.NORMAL, 11));
    grid.add(mainLbl, 2, 0);

    ImageView imageLogo;
    imageLogo =
        new ImageView(new Image(PolyStar.class.getResourceAsStream("graphics/SMULOGO2.png")));
    grid.add(imageLogo, 4, 0, 2, 1);

    // Model atmosphere parameters:
    Label atmosLbl = new Label("Model star parameters:");
    atmosLbl.setFont(Font.font("Tahoma", FontWeight.NORMAL, 12));
    grid.add(atmosLbl, 0, 1);
    Tooltip atmosTip = new Tooltip();
    atmosTip.setText(
        "Default parameters are for the Sun's central density, \r\n"
            + " rho_c = 162 g/cm^3, n=1.5");
    atmosLbl.setTooltip(atmosTip);

    // central density input - solar units
    Label rhoCLbl = new Label("rho_c (0.1 - 10.0 x rho_C_Sun)");
    grid.add(rhoCLbl, 0, 2);
    Tooltip rhoCTip = new Tooltip();
    rhoCTip.setText(
        "Central mass density relative to that of Sun \r\n" + " rho_C_Sun = 162 g cm^-3");
    rhoCLbl.setTooltip(rhoCTip);

    TextField rhoCSolIn = new TextField("1.0");
    grid.add(rhoCSolIn, 1, 2);

    Label trialLbl = new Label(" ");
    trialLbl.setFont(Font.font("Tahoma", FontWeight.NORMAL, 12));
    grid.add(trialLbl, 2, 1);

    // Polytropic index, n - dimensionless:
    Label indexLbl = new Label("n (1.0 - 3.5)");
    grid.add(indexLbl, 0, 3);
    Tooltip indexTip = new Tooltip();
    indexTip.setText(
        "Dimensionless polytropic index.  \r\n"
            + " = Adiabatic gamma = (n+1)/n \r\n"
            + " n=1.5 for ideal monatomic gas (best for Sun) \r\n"
            + " n=3.0 for photon gas - Eddington standard model");
    indexLbl.setTooltip(indexTip);

    TextField indexIn = new TextField("1.5");
    grid.add(indexIn, 1, 3);
    /*
    // Radiation pressure fraction, beta:
    Label betaLbl = new Label("Beta (0 - 1)");
    grid.add(betaLbl, 0, 4);
    Tooltip betaTip = new Tooltip();
    betaTip.setText(
    "Fractional contribution of gas pressure, P_Gas\r\n"
    + "to total pressure (ie. P_Gas = Beta * P = P - P_Rad)"
    );
    betaLbl.setTooltip(betaTip);

    TextField betaIn = new TextField("0.0");
    grid.add(betaIn, 1, 4);
    */

    // He mass fraction (Y)
    Label yFracLbl = new Label("He mass fraction, Y (0.2 - 0.5)");
    grid.add(yFracLbl, 2, 2);
    Tooltip yFracTip = new Tooltip();
    yFracTip.setText("Helium mass fraction, Y (0.2 - 0.5)");
    yFracLbl.setTooltip(yFracTip);

    TextField yFracIn = new TextField("0.28");
    grid.add(yFracIn, 3, 2);

    // metal mass fraction (Z)
    Label zFracLbl = new Label("Metal mass fraction, Z (0.0001 - 0.05)");
    grid.add(zFracLbl, 2, 3);
    Tooltip zFracTip = new Tooltip();
    zFracTip.setText("Mass fraction of elements of z > 2, Z (0.0001 - 0.05)");
    zFracLbl.setTooltip(zFracTip);

    TextField zFracIn = new TextField("0.02");
    grid.add(zFracIn, 3, 3);

    //
    //
    Button btn = new Button("Model");
    HBox hbBtn = new HBox(10);
    hbBtn.setAlignment(Pos.BOTTOM_RIGHT);
    hbBtn.getChildren().add(btn);
    grid.add(hbBtn, 3, 5);

    final Text actiontarget = new Text();
    grid.add(actiontarget, 0, 8);

    btn.setOnAction(
        new EventHandler<ActionEvent>() {

          @Override
          public void handle(ActionEvent event) {
            actiontarget.setFill(Color.FIREBRICK);
            // actiontarget.setText("Output here");
            actiontarget.setFont(Font.font("Tahoma", FontWeight.NORMAL, 14));

            String rhoCSolStr = rhoCSolIn.getText();
            String indexStr = indexIn.getText();
            // String betaStr = betaIn.getText();
            String yFracStr = yFracIn.getText();
            String zFracStr = zFracIn.getText();

            // If *any* model atmosphere input string is empty, set rhoCSolStr to empty to simplify
            // conditional logic below.
            if (indexStr == null || indexStr.isEmpty()) {
              rhoCSolStr = null;
            }
            // if (betaStr == null || betaStr.isEmpty()) {
            //    rhoCSolStr = null;
            // }
            if (yFracStr == null || yFracStr.isEmpty()) {
              rhoCSolStr = null;
            }
            if (zFracStr == null || zFracStr.isEmpty()) {
              rhoCSolStr = null;
            }

            if ((rhoCSolStr != null && !rhoCSolStr.isEmpty())) {

              // Argument 1: Stellar mass, M, in solar masses
              double rhoCSol = (Double.valueOf(rhoCSolStr)).doubleValue();

              // Argument 2: He mass fraftion, Y
              double yFrac = (Double.valueOf(yFracStr)).doubleValue();

              // Argument 3: Metal mass fraftion, Z
              double zFrac = (Double.valueOf(zFracStr)).doubleValue();

              // Argument 4: Effective temperature, Teff, in K:
              double index = (Double.valueOf(indexStr)).doubleValue();

              //// Argument 5: Logarithmic surface gravity, g, in cm/s/s:
              // double beta = (Double.valueOf(betaStr)).doubleValue();
              // Sanity checks:
              if (rhoCSol < 0.1) {
                rhoCSol = 0.1;
                rhoCSolStr = "0.1";
              }
              if (rhoCSol > 10.0) {
                rhoCSol = 10.0;
                rhoCSolStr = "10.0";
              }

              if (yFrac < 0.1) {
                yFrac = 0.1;
                yFracStr = "0.1";
              }
              if (yFrac > 0.5) {
                yFrac = 0.5;
                yFracStr = "0.5";
              }

              if (zFrac < 0.0002) {
                zFrac = 0.0002;
                zFracStr = "0.0002";
              }
              if (zFrac > 0.05) {
                zFrac = 0.05;
                zFracStr = "0.05";
              }

              if (index < 1.0) {
                index = 1.0;
                indexStr = "1.0";
              }
              if (index > 3.5) {
                index = 3.5;
                indexStr = "3.5";
              }

              // if (beta < 0.0) {
              //    beta = 0.0;
              //    betaStr = "0.0";
              // }
              // if (beta > 1.0) {
              //    beta = 1.0;
              //    betaStr = "1.0";
              // }
              // All code after this line
              // Solar parameters:
              double teffSun = 5778.0;
              double log10gSun = 4.44;
              double gravSun = Math.pow(10.0, log10gSun);
              // Solar units:
              double massSun = 1.0;
              double radiusSun = 1.0;
              double rhoCSun = 162.2; // g cm^-3
              // double massStar = 1.0; //solar masses // test

              // Composition by mass fraction - needed for opacity approximations
              //   and interior structure
              double massXSun = 0.70; // Hydrogen
              double massYSun = 0.28; // Helium
              double massZSun = 0.02; // "metals"
              // log_10 num density H in surface layer:
              double log10NH = 17.0;

              double log10E = Math.log10(Math.E); // convert log_e to log_10
              double logE10 = Math.log(10.0); // convert log_10 to log_e

              double xFrac = 1.0 - yFrac - zFrac;
              double logXFrac = Math.log(xFrac);
              double logYFrac = Math.log(yFrac);

              double rhoC = rhoCSol * rhoCSun; // Sun's central mass density in cgs units

              // Set up all the special Lane-Emden equation variables:
              // Adiabatic gamma consistent with input polytropic index
              double gammaPoly = (index + 1.0) / index;
              // For convection criterion:
              double gamThing = PhysData.gammaMono / (PhysData.gammaMono - 1.0);

              // Initial Kay and lambda parameters from Lame-Embden equations:
              /* Doesn't work
              double Kay, KayTerm1, KayTerm2;
              KayTerm1 = 3.0 * (1.0 - beta) / Useful.aStef();
              KayTerm2 = Useful.k / beta / PhysData.muI(xFrac, yFrac, zFrac) / Useful.amu;
              Kay = Math.pow(KayTerm1, 0.3333) * Math.pow(KayTerm2, 4.0 / 3.0);
              */
              double Kay = 5.0e13; // hard wire to value at centre of Sun

              double lambda, lamTerm, indxExp;
              indxExp = (1.0 - index) / index;
              lamTerm =
                  (index + 1.0) * Kay * Math.pow(rhoC, indxExp) / 4.0 / Math.PI / Useful.GConst;
              lambda = Math.pow(lamTerm, 0.5);

              System.out.println("Kay " + Kay + " lambda " + lambda);

              // Dimensionless Lane-Emden Equation variables, xi and D_n(xi)
              // xi is the independenet variable
              // y(xi) is a helper function to separate the 2nd order Lane-Emden equation
              // into two coupled 1st order equations
              int maxNumDeps = 1000;
              double[] xi = new double[maxNumDeps];
              double[] DFunc = new double[maxNumDeps];
              double[] yFunc = new double[maxNumDeps];
              double deltaXi, deltaDFunc, deltaY, deltaYMag;
              // double logDeltaXi, logDeltaD, logDeltaY, logDeltaYMag;

              // Physical variables:
              double[] radShell = new double[maxNumDeps]; // shell radial width
              double[] tempShell = new double[maxNumDeps]; // kinetic temperature
              double[] pressShell = new double[maxNumDeps]; // total pressure
              double[] pGasShell = new double[maxNumDeps]; // gas pressure
              double[] pRadShell = new double[maxNumDeps]; // radiation pressure
              double[] rhoShell = new double[maxNumDeps]; // total fluid density
              double[] massShell = new double[maxNumDeps]; // shell mass
              double[] lumShell = new double[maxNumDeps]; // shell luminosity
              double[] lumPpShell = new double[maxNumDeps]; // shell luminosity
              double[] lumCnoShell = new double[maxNumDeps]; // shell luminosity

              double[] epsShell = new double[maxNumDeps]; // total nuclear energy generation rate
              double[] epsPpShell =
                  new double[maxNumDeps]; // nuclear p-p chain energy generation rate
              double[] epsCnoShell =
                  new double[maxNumDeps]; // nuclear cno cycle energy generation rate

              double[] kapShell = new double[maxNumDeps]; // mean opacity
              double[] kapBfShell = new double[maxNumDeps]; // mean b-f opacity
              double[] kapFfShell = new double[maxNumDeps]; // mean f-f opacity
              double[] kapEsShell = new double[maxNumDeps]; // mean e^- scattering opacity
              double[] kapHminShell = new double[maxNumDeps]; // mean H^- opacity

              // cumulative quantities
              double[] radInt = new double[maxNumDeps]; // interior radius
              // double[] logRadInt = new double[maxNumDeps];
              double[] massInt = new double[maxNumDeps]; // interior mass
              double[] lumInt = new double[maxNumDeps]; // interior luminosity
              double[] lumPpInt = new double[maxNumDeps]; // interior luminosity
              double[] lumCnoInt = new double[maxNumDeps]; // interior luminosity
              double[] gravInt = new double[maxNumDeps]; // acceleration of gravity

              // Convection:
              double[] dLnPdLnT = new double[maxNumDeps];
              boolean[] convFlag = new boolean[maxNumDeps];

              double RHS, logRHS, logRHSMag; // , logLastXi;
              double xiSquare; // useful

              // Try uniform spacing for now...
              // We know that at surface, xi >~ 3.0
              // guess at a good spacing for now...
              // Surface value of dimensionless xi parameter is in
              //   range 3 to 7 for polytropic index 1.5 to 3.0
              deltaXi = 10.0 / maxNumDeps;
              // deltaXi = 0.04;  //debug mode
              // logDeltaXi = Math.log(deltaXi);

              // For Newton-Raphson temperature recovery:
              double firstTemp = 0.0;

              // central bounday (initial) values:
              // NOTE: we cannot set xi=0 - singularity
              // We know that at surface, xi >~ 3.0
              // guess at a good initial abscissa and spacing for now...
              int j = 0;
              xi[j] = 0.001;
              yFunc[j] = 0.0;
              DFunc[j] = 1.0;
              // The stuff that follows...
              radInt[j] = lambda * xi[j];
              radShell[j] = radInt[j];
              rhoShell[j] = rhoC * Math.pow(DFunc[j], index);
              pressShell[j] = Kay * Math.pow(rhoShell[j], gammaPoly);
              tempShell[j] =
                  NRtemp.getTemp(pressShell[j], rhoShell[j], xFrac, yFrac, zFrac, firstTemp);
              // pGasShell[j] = beta * pressShell[j];
              // pRadShell[j] = (1.0 - beta) * pressShell[j];
              pGasShell[j] =
                  Useful.k
                      * rhoShell[j]
                      * tempShell[j]
                      / PhysData.muI(xFrac, yFrac, zFrac)
                      / Useful.amu;
              pRadShell[j] = Useful.aStef() * Math.pow(tempShell[j], 4.0) / 3.0;
              // tempShell[i] = pressShell[i] * PhysData.muI(xFrac, yFrac, zFrac) * Useful.amu /
              // Useful.k / rhoShell[i];
              massInt[j] = rhoC * 4.0 * Math.PI * Math.pow(radInt[j], 3) / 3.0;
              massShell[j] = massInt[j];

              if (tempShell[j] >= PhysData.fusionPPTemp) {
                epsPpShell[j] =
                    Power.ppChain(tempShell[j], rhoShell[j], xFrac, zFrac); // H fusion p-p chain
                epsCnoShell[j] =
                    Power.cnoCycle(tempShell[j], rhoShell[j], xFrac, zFrac); // H fusion CNO cycle
                epsShell[j] = epsPpShell[j] + epsCnoShell[j];
                // lumInt[j] = rhoC * 4.0 * Math.PI * Math.pow(radInt[j], 3) * epsShell[j] / 3.0;
                lumPpInt[j] = rhoC * 4.0 * Math.PI * Math.pow(radInt[j], 3) * epsPpShell[j] / 3.0;
                lumCnoInt[j] = rhoC * 4.0 * Math.PI * Math.pow(radInt[j], 3) * epsCnoShell[j] / 3.0;
                lumPpShell[j] = lumPpInt[j];
                lumCnoShell[j] = lumCnoInt[j];
                lumInt[j] = lumPpInt[j] + lumCnoInt[j];
                lumShell[j] = lumPpShell[j] + lumCnoShell[j];
              } else {
                epsPpShell[j] = 0.0; // H fusion p-p chain
                epsCnoShell[j] = 0.0; // H fusion CNO cycle
                epsShell[j] = 0.0;
                // lumInt[j] = rhoC * 4.0 * Math.PI * Math.pow(radInt[j], 3) * epsShell[j] / 3.0;
                lumPpInt[j] = 0.0;
                lumCnoInt[j] = 0.0;
                lumPpShell[j] = 0.0;
                lumCnoShell[j] = 0.0;
                lumInt[j] = 0.0;
                lumShell[j] = 0.0;
              }

              kapBfShell[j] =
                  Kappa.kappaBfFn(tempShell[j], rhoShell[j], xFrac, zFrac); // b-f photo-ionization
              kapFfShell[j] =
                  Kappa.kappaFfFn(tempShell[j], rhoShell[j], xFrac, zFrac); // f-f Bremsstrahlung
              kapEsShell[j] =
                  Kappa.kappaEsFn(
                      tempShell[j], rhoShell[j], xFrac, zFrac); // Thomson e^- scattering
              kapHminShell[j] =
                  Kappa.kappaHminFn(tempShell[j], rhoShell[j], xFrac, zFrac); // H^- b-f
              kapShell[j] = kapBfShell[j] + kapFfShell[j] + kapEsShell[j] + kapHminShell[j];

              gravInt[j] = Useful.GConst * massInt[j] / Math.pow(radInt[j], 2);

              dLnPdLnT[j] = 0.0;

              // 4th order Runge-Kutta (RK4) helper variables
              double k1y, k2y, k3y, k4y;
              double k1D, k2D, k3D, k4D;
              double hHalf = deltaXi / 2.0;
              double yHalf, DHalf, xiHalf;
              double yFull, DFull, xiFull;

              // System.out.println("    i     " + "   radius   " + "   massIn    " + "   lumInt   "
              // + "   temp   " + "   press   "
              //        + "   rh    " + "   kappa   " + "   epsilon   " + "   dLnPdLnT    " + "
              // gravInt   " + "   pGas/PTot    "
              //        + "   convection? ");
              // System.out.println("      i       " + "    radius    " + "    press    " + "    rho
              //    ");
              // Master numerical integration loop:
              // Loop exits when surface is found
              // Try Euler's method for now...
              // System.out.println("i    xi[i]    yFunc[i]    DFunc[i] ");
              int iSurf = 0;
              int iCore = 0;
              for (int i = 1; i < maxNumDeps; i++) {

                xi[i] = xi[i - 1] + deltaXi;

                /* Logarithmic - difficult due to signs
                logLastXi = Math.log(xi[i - 1]);

                //Start by advanceing helper function, y(xi):
                logRHSMag = index * Math.log(DFunc[i - 1]) + 2.0 * logLastXi;
                //RHS = -1.0 * Math.exp(logRHSMag);
                logDeltaYMag = logRHSMag + logDeltaXi;
                deltaYMag = Math.exp(logDeltaYMag);
                deltaY = -1.0 * deltaYMag;
                yFunc[i] = yFunc[i - 1] + deltaY;

                //Now use the updated value of y to update D_n
                logRHS = Math.log(yFunc[i]) - 2.0 * logLastXi;
                logDeltaD = logRHS + logDeltaXi;
                deltaDFunc = Math.exp(logDeltaD);
                DFunc[i] = DFunc[i - 1] + deltaDFunc;
                */
                //
                xiSquare = Math.pow(xi[i - 1], 2);
                xiHalf = Math.pow((xi[i - 1] + hHalf), 2);
                xiFull = Math.pow(xi[i], 2);
                //

                /*
                //Euler's method
                //Start by advanceing helper function, y(xi):
                RHS = -1.0 * Math.pow(DFunc[i - 1], index) * xiSquare;
                deltaY = RHS * deltaXi;
                yFunc[i] = yFunc[i - 1] + deltaY;

                //Now use the updated value of y to update D_n
                RHS = yFunc[i] / xiSquare;
                deltaDFunc = RHS * deltaXi;
                DFunc[i] = DFunc[i - 1] + deltaDFunc;

                System.out.format("Euler: %03d   %15.10f   %15.10f   %15.10f%n", i, xi[i], yFunc[i], DFunc[i]);
                */
                // 4th order Runge-Kutta (RK4):
                k1y = -1.0 * Math.pow(DFunc[i - 1], index) * xiSquare;
                k1D = yFunc[i - 1] / xiSquare;

                DHalf = DFunc[i - 1] + hHalf * k1D;
                yHalf = yFunc[i - 1] + hHalf * k1y;
                k2y = -1.0 * Math.pow(DHalf, index) * xiHalf;
                k2D = yHalf / xiHalf;

                DHalf = DFunc[i - 1] + hHalf * k2D;
                yHalf = yFunc[i - 1] + hHalf * k2y;
                k3y = -1.0 * Math.pow(DHalf, index) * xiHalf;
                k3D = yHalf / xiHalf;

                DFull = DFunc[i - 1] + deltaXi * k3D;
                yFull = yFunc[i - 1] + deltaXi * k3y;
                k4y = -1.0 * Math.pow(DFull, index) * xiFull;
                k4D = yFull / xiFull;

                deltaY = deltaXi * (k1y + 2.0 * k2y + 2.0 * k3y + k4y) / 6.0;
                deltaDFunc = deltaXi * (k1D + 2.0 * k2D + 2.0 * k3D + k4D) / 6.0;
                yFunc[i] = yFunc[i - 1] + deltaY;
                DFunc[i] = DFunc[i - 1] + deltaDFunc;

                // Are we there yet?
                if ((DFunc[i] <= 0)
                    || (Double.isNaN(DFunc[i]) == true)
                    || (Double.isInfinite(DFunc[i]) == true)) {
                  break;
                }

                // System.out.format("RK4: %03d   %15.10f   %15.10f   %15.10f%n", i, xi[i],
                // yFunc[i], DFunc[i]);
                radInt[i] = lambda * xi[i];
                radShell[i] = radInt[i] - radInt[i - 1];
                rhoShell[i] = rhoC * Math.pow(DFunc[i], index);
                pressShell[i] = Kay * Math.pow(rhoShell[i], gammaPoly);
                tempShell[i] =
                    NRtemp.getTemp(
                        pressShell[i], rhoShell[i], xFrac, yFrac, zFrac, tempShell[i - 1]);
                // pGasShell[i] = beta * pressShell[i];
                // pRadShell[i] = (1.0 - beta) * pressShell[i];
                pGasShell[i] =
                    Useful.k
                        * rhoShell[i]
                        * tempShell[i]
                        / PhysData.muI(xFrac, yFrac, zFrac)
                        / Useful.amu;
                pRadShell[i] = Useful.aStef() * Math.pow(tempShell[i], 4.0) / 3.0;
                // tempShell[i] = pressShell[i] * PhysData.muI(xFrac, yFrac, zFrac) * Useful.amu /
                // Useful.k / rhoShell[i];
                massShell[i] = 4.0 * Math.PI * Math.pow(radInt[i], 2) * rhoShell[i] * radShell[i];
                massInt[i] = massInt[i - 1] + massShell[i];
                // epsShell[i] = Power.nuclear(tempShell[i], rhoShell[i], xFrac, zFrac);

                if (tempShell[i] >= PhysData.fusionPPTemp) {
                  iCore = i;
                  epsPpShell[i] =
                      Power.ppChain(tempShell[i], rhoShell[i], xFrac, zFrac); // H fusion p-p chain
                  epsCnoShell[i] =
                      Power.cnoCycle(tempShell[i], rhoShell[i], xFrac, zFrac); // H fusion CNO cycle
                  epsShell[i] = epsPpShell[i] + epsCnoShell[i];
                  // lumShell[i] = 4.0 * Math.PI * Math.pow(radInt[i], 2) * rhoShell[i] *
                  // epsShell[i] * radShell[i];
                  lumPpShell[i] =
                      4.0
                          * Math.PI
                          * Math.pow(radInt[i], 2)
                          * rhoShell[i]
                          * epsPpShell[i]
                          * radShell[i];
                  lumCnoShell[i] =
                      4.0
                          * Math.PI
                          * Math.pow(radInt[i], 2)
                          * rhoShell[i]
                          * epsCnoShell[i]
                          * radShell[i];
                  lumShell[i] = lumPpShell[i] + lumCnoShell[i];
                  lumPpInt[i] = lumPpInt[i - 1] + lumPpShell[i];
                  lumCnoInt[i] = lumCnoInt[i - 1] + lumCnoShell[i];
                  lumInt[i] = lumInt[i - 1] + lumShell[i];
                } else {
                  epsPpShell[i] = 0.0; // H fusion p-p chain
                  epsCnoShell[i] = 0.0; // H fusion CNO cycle
                  epsShell[i] = 0.0;
                  // lumShell[i] = 4.0 * Math.PI * Math.pow(radInt[i], 2) * rhoShell[i] *
                  // epsShell[i] * radShell[i];
                  lumPpShell[i] = 0.0;
                  lumCnoShell[i] =
                      4.0
                          * Math.PI
                          * Math.pow(radInt[i], 2)
                          * rhoShell[i]
                          * epsCnoShell[i]
                          * radShell[i];
                  lumShell[i] = 0.0;
                  lumPpInt[i] = lumPpInt[i - 1];
                  lumCnoInt[i] = lumCnoInt[i - 1];
                  lumInt[i] = lumInt[i - 1];
                }

                // kapShell[i] = Kappa.kappaFn(tempShell[i], rhoShell[i], xFrac, zFrac);
                kapBfShell[i] =
                    Kappa.kappaBfFn(
                        tempShell[i], rhoShell[i], xFrac, zFrac); // b-f photo-ionization
                kapFfShell[i] =
                    Kappa.kappaFfFn(tempShell[i], rhoShell[i], xFrac, zFrac); // f-f Bremsstrahlung
                kapEsShell[i] =
                    Kappa.kappaEsFn(
                        tempShell[i], rhoShell[i], xFrac, zFrac); // Thomson e^- scattering
                kapHminShell[i] =
                    Kappa.kappaHminFn(tempShell[i], rhoShell[i], xFrac, zFrac); // H^- b-f
                kapShell[i] = kapBfShell[i] + kapFfShell[i] + kapEsShell[i] + kapHminShell[i];

                gravInt[i] = Useful.GConst * massInt[i] / Math.pow(radInt[i], 2);

                dLnPdLnT[i] =
                    (Math.log(pGasShell[i]) - Math.log(pGasShell[i - 1]))
                        / (Math.log(tempShell[i]) - Math.log(tempShell[i - 1]));
                if ((dLnPdLnT[i] >= gamThing)) {
                  // Radiative transport
                  convFlag[i] = false;
                } else {
                  // Convective transport
                  convFlag[i] = true;
                }

                // Dynamically update Kay and lambda:
                // Hmmm... these never seem to change, but let's update them anyway...
                Kay = pressShell[i] / Math.pow(rhoShell[i], gammaPoly);
                lamTerm =
                    (index + 1.0) * Kay * Math.pow(rhoC, indxExp) / 4.0 / Math.PI / Useful.GConst;
                lambda = Math.pow(lamTerm, 0.5);
                // System.out.println("Kay " + Kay + " lambda " + lambda);

                // System.out.println("    i     " + "     radius     " + "     massInt     " + "
                //  lumInt     " + "     temp     " + "     press     "
                //         + "     rho     " + "     kappa     " + "     epsilon     " + "
                // dLnPdLnT     " + "     gravInt     " + "     pGas/PTot     "
                //         + "     convection? ");
                // System.out.println("      i       " + "    radius    " + "    press    " + "
                // rho    ");
                // System.out.format("%03d  %10.6f   %10.6f   %10.6f   %10.6f   %10.6f   %10.6f
                // %10.6f   %10.6f   %10.6f   %10.6f   %10.6f   %b%n",
                //        i, log10E * Math.log(radInt[i]), log10E * Math.log(massInt[i]), log10E *
                // Math.log(lumInt[i]), log10E * Math.log(tempShell[i]),
                //        log10E * Math.log(pressShell[i]), log10E * Math.log(rhoShell[i]),
                // kapShell[i], log10E * Math.log(epsShell[i]),
                //        dLnPdLnT[i], log10E * Math.log(gravInt[i]), pGasShell[i] / pressShell[i],
                // convFlag[i]);
                // System.out.format("   %03d     %15.11f      %15.11f      %15.11f      %15.11f
                //  %n",
                //        i, log10E * Math.log(radInt[i]), log10E * Math.log(pressShell[i]), log10E
                // * Math.log(rhoShell[i]), log10E * Math.log(tempShell[i]));
                // Surface boundary condition:
                iSurf++;
              }

              int numDeps = iSurf;
              System.out.println("Actual number of depths = " + numDeps);
              // Independent total mass calculation:
              // First derivative, dD_n/dXi at surface:
              double dDFuncdXi = (DFunc[iSurf] - DFunc[iSurf - 1]) / (xi[iSurf] - xi[iSurf - 1]);
              double totMass =
                  -4.0
                      * Math.PI
                      * Math.pow(lambda, 3.0)
                      * rhoC
                      * Math.pow(xi[iSurf], 2.0)
                      * dDFuncdXi;
              System.out.println("Total analytic mass " + totMass);

              // Results:
              // cgs units:
              double mass = massInt[numDeps];
              double radius = radInt[numDeps];
              double luminosity = lumInt[numDeps];
              double surfTemp = tempShell[numDeps];

              // Compute the effective temperature of the model:
              double teff4 = luminosity / 4.0 / Math.PI / Math.pow(radius, 2.0) / Useful.sigma;
              double teff = Math.pow(teff4, 0.25);

              // solar units:
              double massSol = mass / Useful.mSun;
              double radiusSol = radius / Useful.rSun;
              double lumSol = luminosity / Useful.lSun;

              // Run the loop inward to build the optical depth scasle, tauIn:
              //// No!While we're at it - find the nuclear burning core
              double[] tauIn = new double[numDeps];
              tauIn[numDeps - 1] = 0.0;
              // int iCore = numDeps - 1;
              for (int i = numDeps - 2; i == 0; i--) {
                tauIn[i] = tauIn[i - 1] + rhoShell[i] * kapShell[i] * radShell[i];
                // if (lumInt[i] > 0.99 * luminosity) {
                //    iCore--;
                // }
              }

              // Report:
              System.out.println("cgs units:");
              System.out.println(
                  "Radius: "
                      + log10E * Math.log(radius)
                      + " Mass: "
                      + log10E * Math.log(mass)
                      + " Bol Luminosity: "
                      + log10E * Math.log(luminosity));
              System.out.println("Teff: " + teff + " TSurf: " + surfTemp);
              System.out.println("Solar units:");
              System.out.println(
                  "Radius: " + radiusSol + " Mass: " + massSol + " Bol Luminosity: " + lumSol);
              System.out.println(
                  "Nuclear burning core fractional radius: " + (radInt[iCore] / radius));

              // Compute spectral energy distribution (SED):
              // wavelength grid (cm):
              double[] waveSetup = new double[3];
              waveSetup[0] = 100.0 * 1.0e-7; // test Start wavelength, cm
              waveSetup[1] = 2000.0 * 1.0e-7; // test End wavelength, cm
              waveSetup[2] = 100; // test number of lambda
              int numWaves = (int) waveSetup[2];

              double[] SED = new double[numWaves];
              double[] waveGrid = new double[numWaves];
              double thisWave, thisLogWave, logWave0, logWave1;
              logWave0 = Math.log(waveSetup[0]);
              logWave1 = Math.log(waveSetup[1]);
              double deltaLogWave = (logWave1 - logWave0) / numWaves;
              for (int i = 0; i < numWaves; i++) {
                thisLogWave = logWave0 + ((double) i) * deltaLogWave;
                thisWave = Math.exp(thisLogWave);
                waveGrid[i] = thisWave;
                SED[i] = Planck.planck(teff, thisWave);
                // System.out.println(" " + waveGrid[i] + " " + SED[i]);
              }

              //
              // double colors[] = new double[5];
              double colors[] = Photometry.UBVRI(waveGrid, SED);

              // All code before this line
              String patternCol = "0.00";
              // String pattern = "#####.##";
              DecimalFormat colFormatter = new DecimalFormat(patternCol);
              // // String patternWl = "0.00";
              //  //String pattern = "#####.##";
              // DecimalFormat WlFormatter = new DecimalFormat(patternWl);

              actiontarget.setText(
                  "Photometric color indices: "
                      + "U-B: "
                      + colFormatter.format(colors[0])
                      + " B-V: "
                      + colFormatter.format(colors[1])
                      + " V-R: "
                      + colFormatter.format(colors[2])
                      + " V-I: "
                      + colFormatter.format(colors[3])
                      + " R-I: "
                      + colFormatter.format(colors[4])
                      + "\r\n");

              // No! //grid.getChildren().add(r);
              // Graphical output section:
              /*
              // Plot 1: T_Kin(radius):
              LineChart<Number, Number> lineChartT2 = LineCharts.t2Plot(numDeps, radInt, tempShell);
              grid.add(lineChartT2, 0, 9);
              // Plot 2: log(P(radius):
              LineChart<Number, Number> lineChartP = LineCharts.pressPlot(numDeps, radInt, pressShell, pGasShell, pRadShell);
              grid.add(lineChartP, 2, 9);
              // Plot 3: log rho:
              LineChart<Number, Number> lineChartRho = LineCharts.rhoPlot(numDeps, radInt, rhoShell);
              grid.add(lineChartRho, 2, 11);

              // Plot 4: log cumulative L_Bol
              LineChart<Number, Number> lineChartLum = LineCharts.lumPlot(numDeps, radInt, lumInt, lumPpInt, lumCnoInt);
              grid.add(lineChartLum, 0, 10);

              // Plot 5: log cumulative mass
              LineChart<Number, Number> lineChartMass = LineCharts.massPlot(numDeps, radInt, massInt);
              grid.add(lineChartMass, 2, 10);
              // Plot 6: log epsilon (nuc power generation)
              LineChart<Number, Number> lineChartEps = LineCharts.epsPlot(numDeps, radInt, epsShell, epsPpShell, epsCnoShell);
              grid.add(lineChartEps, 0, 11);
              // Plot 7: log kappa (mass extinction)
              LineChart<Number, Number> lineChartKap = LineCharts.kapPlot(numDeps, radInt, kapShell, kapBfShell, kapFfShell, kapEsShell, kapHminShell);
              grid.add(lineChartKap, 4, 10);
              // Plot 8: log flux(lambda) (SED)
              LineChart<Number, Number> lineChartSED = LineCharts.sedPlot(numWaves, waveGrid, SED);
              grid.add(lineChartSED, 4, 11);
              */

              // Graphical output section:
              // Plot 1: T_Kin(radius):
              LineChart<Number, Number> lineChartT2 = LineCharts.t2Plot(numDeps, radInt, tempShell);
              grid.add(lineChartT2, 0, 9);
              // Plot 2: log(P(radius):
              LineChart<Number, Number> lineChartP =
                  LineCharts.pressPlot(numDeps, radInt, pressShell, pGasShell, pRadShell);
              grid.add(lineChartP, 2, 9);
              // Plot 3: log rho:
              LineChart<Number, Number> lineChartRho =
                  LineCharts.rhoPlot(numDeps, radInt, rhoShell);
              grid.add(lineChartRho, 2, 13);

              // Plot 4: log cumulative L_Bol
              LineChart<Number, Number> lineChartLum =
                  LineCharts.lumPlot(numDeps, iCore, radInt, lumInt, lumPpInt, lumCnoInt);
              grid.add(lineChartLum, 0, 11);

              // Plot 5: log cumulative mass
              LineChart<Number, Number> lineChartMass =
                  LineCharts.massPlot(numDeps, radInt, massInt);
              grid.add(lineChartMass, 2, 11);
              // Plot 6: log epsilon (nuc power generation)
              LineChart<Number, Number> lineChartEps =
                  LineCharts.epsPlot(numDeps, radInt, epsShell, epsPpShell, epsCnoShell);
              grid.add(lineChartEps, 0, 13);
              // Plot 7: log kappa (mass extinction)
              LineChart<Number, Number> lineChartKap =
                  LineCharts.kapPlot(
                      numDeps, radInt, kapShell, kapBfShell, kapFfShell, kapEsShell, kapHminShell);
              grid.add(lineChartKap, 4, 11);
              // Plot 8: log flux(lambda) (SED)
              LineChart<Number, Number> lineChartSED = LineCharts.sedPlot(numWaves, waveGrid, SED);
              grid.add(lineChartSED, 4, 13);

              //                   LineChart<Number, Number> lineChartSpec =
              // LineCharts.specPlot(numMaster, masterLams, cosTheta, masterIntens, masterFlux);
              //                   grid.add(lineChartSpec, 2, 10);
              //// LineChart<Number, Number> lineChartLine = LineCharts.linePlot(numPoints,
              // lineLambdas, cosTheta, lineProf, lam0);
              //                   grid.add(lineChartLine, 4, 10);
              // Debug versions of the function with parameters for plotting up quqntities used in
              // line profile
              // calculation:
              // LineChart<Number, Number> lineChartLine = LineCharts.linePlot(numPoints,
              // lineLambdas, cosTheta, logKappaL, lam0, kappa);
              // grid.add(lineChartLine, 4, 10);
              // LineChart<Number, Number> lineChartLine = LineCharts.linePlot(numPoints,
              // lineLambdas, cosTheta, logTauL, lam0);
              // grid.add(lineChartLine, 4, 10);
              // Final scene / stage stuff:
              // Scene scene = new Scene(grid, 1600, 900);
              // scene.getStylesheets().add("../../GrayCascadeStyleSheet.css");
              //
              // primaryStage.setScene(scene);
              //
              // primaryStage.show();
            } else {
              actiontarget.setText("All fields must have values");
            }
          }
        });

    // Final scene / stage stuff:
    Scene scene = new Scene(grid, 1600, 900);

    // Stylesheet.css must go in /src/ directory
    scene.getStylesheets().add("GrayCascadeStyleSheet.css");

    primaryStage.setScene(scene);
    primaryStage.show();
  }