/**
* Changes the tooltip of this {@link NodeContentPart} to the given value.
*
* @param visual The visual of this {@link NodeContentPart}.
* @param tooltip The new tooltip for this {@link NodeContentPart}.
*/
protected void refreshTooltip(Group visual, Object tooltip) {
if (tooltip instanceof String) {
if (tooltipNode == null) {
tooltipNode = new Tooltip((String) tooltip);
Tooltip.install(visual, tooltipNode);
} else {
tooltipNode.setText((String) tooltip);
}
}
}
private void addRatingListenerToTooltip(FloatProperty ratingProperty, Tooltip tooltip) {
ratingProperty.addListener(
(observable, oldValue, newValue) -> {
String updatedRating =
i18n.get(
"userInfo.ratingFormat",
RatingUtil.getGlobalRating(playerInfoBean),
RatingUtil.getLeaderboardRating(playerInfoBean));
tooltip.setText(updatedRating);
});
}
private void handleEvents(final String EVENT_TYPE) {
if ("RESIZE".equals(EVENT_TYPE)) {
resize();
redraw();
} else if ("REDRAW".equals(EVENT_TYPE)) {
redraw();
} else if ("RECALC".equals(EVENT_TYPE)) {
angleRange = Helper.clamp(90.0, 180.0, getSkinnable().getAngleRange());
startAngle = getStartAngle();
minValue = getSkinnable().getMinValue();
range = getSkinnable().getRange();
sections = getSkinnable().getSections();
angleStep = angleRange / range;
redraw();
} else if ("FINISHED".equals(EVENT_TYPE)) {
needleTooltip.setText(String.format(locale, formatString, getSkinnable().getValue()));
double value = getSkinnable().getValue();
if (getSkinnable().isValueVisible()) {
Bounds bounds = pane.localToScreen(pane.getBoundsInLocal());
double xFactor = value > getSkinnable().getRange() * 0.8 ? 0.0 : 0.25;
double tooltipAngle = value * angleStep;
double sinValue = Math.sin(Math.toRadians(180 + angleRange * 0.5 - tooltipAngle));
double cosValue = Math.cos(Math.toRadians(180 + angleRange * 0.5 - tooltipAngle));
double needleTipX =
bounds.getMinX() + bounds.getWidth() * 0.5 + bounds.getHeight() * sinValue;
double needleTipY =
bounds.getMinY() + bounds.getHeight() * 0.72 + bounds.getHeight() * cosValue;
needleTooltip.show(needle, needleTipX, needleTipY);
needleTooltip.setAnchorX(needleTooltip.getX() - needleTooltip.getWidth() * xFactor);
}
if (sections.isEmpty() || sectionsAlwaysVisible) return;
for (Section section : sections) {
if (section.contains(value)) {
barTooltip.setText(section.getText());
break;
}
}
} else if ("VISIBILITY".equals(EVENT_TYPE)) {
Helper.enableNode(titleText, !getSkinnable().getTitle().isEmpty());
}
}
private void configureRatingTooltip() {
if (!playerInfoBean.getChatOnly()) {
Tooltip userRatingTooltip = new Tooltip();
String rating =
i18n.get(
"userInfo.ratingFormat",
RatingUtil.getRoundedGlobalRating(playerInfoBean),
RatingUtil.getLeaderboardRating(playerInfoBean));
userRatingTooltip.setText(rating);
addRatingListenerToTooltip(playerInfoBean.leaderboardRatingMeanProperty(), userRatingTooltip);
addRatingListenerToTooltip(playerInfoBean.globalRatingMeanProperty(), userRatingTooltip);
Tooltip.install(clanLabel, userRatingTooltip);
Tooltip.install(usernameLabel, userRatingTooltip);
}
}
@Override
protected void updateItem(IlliquidMainSalesStatusBean item, boolean empty) {
super.updateItem(item, empty);
if ((!isEmpty()) && (item != null)) {
StringBuilder tooltext = new StringBuilder();
HBox hb = new HBox();
hb.setAlignment(Pos.CENTER);
VBox vb = new VBox();
vb.setAlignment(Pos.CENTER);
double totalCount =
item.getCountTvr() + item.getDays30sale() + item.getDays60sale() + item.getDays90sale();
double proc30;
double proc60;
double proc90;
if (totalCount > 0) {
proc30 = item.getDays30sale() / totalCount;
proc60 = item.getDays60sale() / totalCount;
proc90 = item.getDays90sale() / totalCount;
} else {
proc30 = 1;
proc60 = 1;
proc90 = 1;
}
if (proc30 == 0) {
hb.getChildren().add(new ImageView(imEmpty));
vb.getChildren().add(new ImageView(imEmpty));
} else if (proc30 < 0.10) {
hb.getChildren().add(new ImageView(imRed));
vb.getChildren().add(new ImageView(imRed));
} else if (proc30 >= 0.10 && proc30 < 0.30) {
hb.getChildren().add(new ImageView(imYelow));
vb.getChildren().add(new ImageView(imYelow));
} else if (proc30 >= 0.30) {
hb.getChildren().add(new ImageView(imGreen));
vb.getChildren().add(new ImageView(imGreen));
}
tooltext
.append("1 міс. {")
.append(DateConverters.getDateToStr(per30From))
.append(" - ")
.append(DateConverters.getDateToStr(now))
.append("}: ")
.append(String.format("%.2f", proc30 * 100))
.append("%\n");
if (proc60 == 0) {
hb.getChildren().add(new ImageView(imEmpty));
vb.getChildren().add(new ImageView(imEmpty));
} else if (proc60 < 0.10) {
hb.getChildren().add(new ImageView(imRed));
vb.getChildren().add(new ImageView(imRed));
} else if (proc60 >= 0.10 && proc60 < 0.30) {
hb.getChildren().add(new ImageView(imYelow));
vb.getChildren().add(new ImageView(imYelow));
} else if (proc60 >= 0.30) {
hb.getChildren().add(new ImageView(imGreen));
vb.getChildren().add(new ImageView(imGreen));
}
tooltext
.append("2 міс. {")
.append(DateConverters.getDateToStr(per60From))
.append(" - ")
.append(DateConverters.getDateToStr(per30From))
.append("}: ")
.append(String.format("%.2f", proc60 * 100))
.append("%\n");
if (proc90 == 0) {
hb.getChildren().add(new ImageView(imEmpty));
vb.getChildren().add(new ImageView(imEmpty));
} else if (proc90 < 0.10) {
hb.getChildren().add(new ImageView(imRed));
vb.getChildren().add(new ImageView(imRed));
} else if (proc90 >= 0.10 && proc90 < 0.30) {
hb.getChildren().add(new ImageView(imYelow));
vb.getChildren().add(new ImageView(imYelow));
} else if (proc90 >= 0.30) {
hb.getChildren().add(new ImageView(imGreen));
vb.getChildren().add(new ImageView(imGreen));
}
tooltext
.append("3 міс. {")
.append(DateConverters.getDateToStr(per90From))
.append(" - ")
.append(DateConverters.getDateToStr(per60From))
.append("}: ")
.append(String.format("%.2f", proc90 * 100))
.append("%");
tooltip.setText(tooltext.toString());
tooltip.setGraphic(vb);
setTooltip(tooltip);
setGraphic(hb);
} else {
setGraphic(null);
}
}
public void resetAvatarAttributes() {
tooltip.setText(toString());
} // Note: This updates the text in the Tooltip that was installed earlier. We re-use the
@Override
public void start(Stage primaryStage) {
final boolean closable = false;
final Tab titleTab = new Tab("", new TitlePane());
titleTab.setStyle(style);
titleTab.setClosable(closable);
/** ******** Run Tab ********* */
final Tab runZonesTab = new Tab("Run Zones", new RunThresholdPane());
runZonesTab.setClosable(closable);
final Tab runPacesTab = new Tab("Run Paces", new RunPacesPane());
runPacesTab.setClosable(closable);
final Tab runEstimatesTab =
new Tab("Estimates", new RunEstimatesPane(ModelUtil.newEstimatesModel()));
runEstimatesTab.setClosable(closable);
final Tab runVDotTab = new Tab("VDot");
runVDotTab.setClosable(closable);
runVDotTab.setDisable(true);
final TabPane runTabs = new TabPane();
runTabs.getTabs().addAll(runZonesTab, runPacesTab, runEstimatesTab, runVDotTab);
final Tab runToolsTab = new Tab("Run Tools", runTabs);
runToolsTab.setClosable(closable);
/** ******** Bike Tab ********* */
final Tab bikeZonesTab = new Tab("Bike Zones", new BikeThresholdPane());
bikeZonesTab.setClosable(closable);
final Tab bikePowerTab = new Tab("Power Zones", new BikePowerPane());
bikePowerTab.setClosable(closable);
final Tab bikeAerodynamicsTab = new Tab("Aerodynamics", new AerodynamicsPane());
bikeAerodynamicsTab.setClosable(closable);
final Tab bikeGearRatioTab = new Tab("Gear Ratio", new GearsPane());
bikeGearRatioTab.setClosable(closable);
final Tab bikeTimeSavingsTab = new Tab("Time Savings", new TimeSavingsPane());
bikeTimeSavingsTab.setClosable(closable);
final TabPane bikeTabs =
new TabPane(bikeZonesTab, bikePowerTab, bikeAerodynamicsTab, bikeGearRatioTab);
final Tab bikeToolsTab = new Tab("Bike Tools", bikeTabs);
bikeToolsTab.setClosable(false);
/** ******** Swim Tab ********* */
final Tab swimCSSTab = new Tab("CSS", new CSSPane(ModelUtil.newCSSMOdel()));
swimCSSTab.setClosable(closable);
final Tab swimEstimatesTab =
new Tab("Estimates", new SwimEstimatesPane(ModelUtil.newEstimatesModel()));
swimEstimatesTab.setClosable(closable);
final TabPane swimTabs = new TabPane();
swimTabs.getTabs().addAll(swimCSSTab, swimEstimatesTab);
Tab swimToolsTab = new Tab("Swim Tools", swimTabs);
swimToolsTab.setClosable(false);
/** ******** Utils Tab ********* */
final Tab progressionTab =
new Tab("Progression", new ProgressionPane(ProgressionModel.newInstance()));
progressionTab.setClosable(false);
final ContextMenu progressionContextMenu = new ContextMenu();
progressionContextMenu.setOnShowing(e -> System.out.println("Showing: " + e));
progressionContextMenu.setOnShown(e -> System.out.println("Shown: " + e));
MenuItem progressionMenuItem1 = new MenuItem();
progressionMenuItem1.setText("About");
progressionMenuItem1.setOnAction(e -> System.out.println("About: " + e));
MenuItem progressionMenuItem2 = new MenuItem();
progressionMenuItem2.setText("...");
progressionMenuItem2.setOnAction(e -> System.out.println(": " + e));
progressionContextMenu.getItems().addAll(progressionMenuItem1, progressionMenuItem2);
progressionTab.setContextMenu(progressionContextMenu);
final Tab scheduleTab = new Tab("Schedule");
scheduleTab.setClosable(false);
scheduleTab.setDisable(true);
final Tab rpeTab = new Tab("RPE", new RPETextPane());
rpeTab.setClosable(false);
final Tooltip progressionTooltip = new Tooltip();
progressionTooltip.setText("Calculates progression times in number of weeks");
progressionTab.setTooltip(progressionTooltip);
progressionTooltip.setOnShowing(e -> System.out.println("Progression Tooltip: " + e));
progressionTooltip.setOnShown(e -> System.out.println("Progression Tooltip: " + e));
final TabPane utilTabPane = new TabPane(scheduleTab, rpeTab, progressionTab);
final Tab utilTab = new Tab("Utils", utilTabPane);
utilTab.setClosable(false);
final Tooltip utilTooltip = new Tooltip();
utilTab.setTooltip(utilTooltip);
utilTooltip.setText("Helpful utilities for workouts");
/* Create main tab menu */
TabPane root = new TabPane();
root.setSide(Side.LEFT);
root.getTabs().addAll(titleTab, runToolsTab, bikeToolsTab, swimToolsTab, utilTab);
Scene scene = new Scene(root, 800, 500);
scene.getStylesheets().add(STYLESHEET_PATH);
primaryStage.setResizable(false);
primaryStage.setTitle("Tri App");
primaryStage.setScene(scene);
primaryStage.show();
}
@Override
public void start(Stage primaryStage) {
primaryStage.setTitle("PolyStar 1.0 ");
GridPane grid = new GridPane();
// grid.setAlignment(Pos.CENTER);
grid.setHgap(6);
grid.setVgap(6);
grid.setPadding(new Insets(15, 15, 15, 15));
// grid.setAlignment(Pos.TOP_RIGHT);
Text scenetitle = new Text("PolyStar 1.0 (Hover for tool tips)");
scenetitle.setFont(Font.font("Tahoma", FontWeight.NORMAL, 16));
grid.add(scenetitle, 0, 0, 2, 1);
Label mainLbl = new Label("PolyStar polytropic stellar interior structure modeling");
mainLbl.setFont(Font.font("Tahoma", FontWeight.NORMAL, 11));
grid.add(mainLbl, 2, 0);
ImageView imageLogo;
imageLogo =
new ImageView(new Image(PolyStar.class.getResourceAsStream("graphics/SMULOGO2.png")));
grid.add(imageLogo, 4, 0, 2, 1);
// Model atmosphere parameters:
Label atmosLbl = new Label("Model star parameters:");
atmosLbl.setFont(Font.font("Tahoma", FontWeight.NORMAL, 12));
grid.add(atmosLbl, 0, 1);
Tooltip atmosTip = new Tooltip();
atmosTip.setText(
"Default parameters are for the Sun's central density, \r\n"
+ " rho_c = 162 g/cm^3, n=1.5");
atmosLbl.setTooltip(atmosTip);
// central density input - solar units
Label rhoCLbl = new Label("rho_c (0.1 - 10.0 x rho_C_Sun)");
grid.add(rhoCLbl, 0, 2);
Tooltip rhoCTip = new Tooltip();
rhoCTip.setText(
"Central mass density relative to that of Sun \r\n" + " rho_C_Sun = 162 g cm^-3");
rhoCLbl.setTooltip(rhoCTip);
TextField rhoCSolIn = new TextField("1.0");
grid.add(rhoCSolIn, 1, 2);
Label trialLbl = new Label(" ");
trialLbl.setFont(Font.font("Tahoma", FontWeight.NORMAL, 12));
grid.add(trialLbl, 2, 1);
// Polytropic index, n - dimensionless:
Label indexLbl = new Label("n (1.0 - 3.5)");
grid.add(indexLbl, 0, 3);
Tooltip indexTip = new Tooltip();
indexTip.setText(
"Dimensionless polytropic index. \r\n"
+ " = Adiabatic gamma = (n+1)/n \r\n"
+ " n=1.5 for ideal monatomic gas (best for Sun) \r\n"
+ " n=3.0 for photon gas - Eddington standard model");
indexLbl.setTooltip(indexTip);
TextField indexIn = new TextField("1.5");
grid.add(indexIn, 1, 3);
/*
// Radiation pressure fraction, beta:
Label betaLbl = new Label("Beta (0 - 1)");
grid.add(betaLbl, 0, 4);
Tooltip betaTip = new Tooltip();
betaTip.setText(
"Fractional contribution of gas pressure, P_Gas\r\n"
+ "to total pressure (ie. P_Gas = Beta * P = P - P_Rad)"
);
betaLbl.setTooltip(betaTip);
TextField betaIn = new TextField("0.0");
grid.add(betaIn, 1, 4);
*/
// He mass fraction (Y)
Label yFracLbl = new Label("He mass fraction, Y (0.2 - 0.5)");
grid.add(yFracLbl, 2, 2);
Tooltip yFracTip = new Tooltip();
yFracTip.setText("Helium mass fraction, Y (0.2 - 0.5)");
yFracLbl.setTooltip(yFracTip);
TextField yFracIn = new TextField("0.28");
grid.add(yFracIn, 3, 2);
// metal mass fraction (Z)
Label zFracLbl = new Label("Metal mass fraction, Z (0.0001 - 0.05)");
grid.add(zFracLbl, 2, 3);
Tooltip zFracTip = new Tooltip();
zFracTip.setText("Mass fraction of elements of z > 2, Z (0.0001 - 0.05)");
zFracLbl.setTooltip(zFracTip);
TextField zFracIn = new TextField("0.02");
grid.add(zFracIn, 3, 3);
//
//
Button btn = new Button("Model");
HBox hbBtn = new HBox(10);
hbBtn.setAlignment(Pos.BOTTOM_RIGHT);
hbBtn.getChildren().add(btn);
grid.add(hbBtn, 3, 5);
final Text actiontarget = new Text();
grid.add(actiontarget, 0, 8);
btn.setOnAction(
new EventHandler<ActionEvent>() {
@Override
public void handle(ActionEvent event) {
actiontarget.setFill(Color.FIREBRICK);
// actiontarget.setText("Output here");
actiontarget.setFont(Font.font("Tahoma", FontWeight.NORMAL, 14));
String rhoCSolStr = rhoCSolIn.getText();
String indexStr = indexIn.getText();
// String betaStr = betaIn.getText();
String yFracStr = yFracIn.getText();
String zFracStr = zFracIn.getText();
// If *any* model atmosphere input string is empty, set rhoCSolStr to empty to simplify
// conditional logic below.
if (indexStr == null || indexStr.isEmpty()) {
rhoCSolStr = null;
}
// if (betaStr == null || betaStr.isEmpty()) {
// rhoCSolStr = null;
// }
if (yFracStr == null || yFracStr.isEmpty()) {
rhoCSolStr = null;
}
if (zFracStr == null || zFracStr.isEmpty()) {
rhoCSolStr = null;
}
if ((rhoCSolStr != null && !rhoCSolStr.isEmpty())) {
// Argument 1: Stellar mass, M, in solar masses
double rhoCSol = (Double.valueOf(rhoCSolStr)).doubleValue();
// Argument 2: He mass fraftion, Y
double yFrac = (Double.valueOf(yFracStr)).doubleValue();
// Argument 3: Metal mass fraftion, Z
double zFrac = (Double.valueOf(zFracStr)).doubleValue();
// Argument 4: Effective temperature, Teff, in K:
double index = (Double.valueOf(indexStr)).doubleValue();
//// Argument 5: Logarithmic surface gravity, g, in cm/s/s:
// double beta = (Double.valueOf(betaStr)).doubleValue();
// Sanity checks:
if (rhoCSol < 0.1) {
rhoCSol = 0.1;
rhoCSolStr = "0.1";
}
if (rhoCSol > 10.0) {
rhoCSol = 10.0;
rhoCSolStr = "10.0";
}
if (yFrac < 0.1) {
yFrac = 0.1;
yFracStr = "0.1";
}
if (yFrac > 0.5) {
yFrac = 0.5;
yFracStr = "0.5";
}
if (zFrac < 0.0002) {
zFrac = 0.0002;
zFracStr = "0.0002";
}
if (zFrac > 0.05) {
zFrac = 0.05;
zFracStr = "0.05";
}
if (index < 1.0) {
index = 1.0;
indexStr = "1.0";
}
if (index > 3.5) {
index = 3.5;
indexStr = "3.5";
}
// if (beta < 0.0) {
// beta = 0.0;
// betaStr = "0.0";
// }
// if (beta > 1.0) {
// beta = 1.0;
// betaStr = "1.0";
// }
// All code after this line
// Solar parameters:
double teffSun = 5778.0;
double log10gSun = 4.44;
double gravSun = Math.pow(10.0, log10gSun);
// Solar units:
double massSun = 1.0;
double radiusSun = 1.0;
double rhoCSun = 162.2; // g cm^-3
// double massStar = 1.0; //solar masses // test
// Composition by mass fraction - needed for opacity approximations
// and interior structure
double massXSun = 0.70; // Hydrogen
double massYSun = 0.28; // Helium
double massZSun = 0.02; // "metals"
// log_10 num density H in surface layer:
double log10NH = 17.0;
double log10E = Math.log10(Math.E); // convert log_e to log_10
double logE10 = Math.log(10.0); // convert log_10 to log_e
double xFrac = 1.0 - yFrac - zFrac;
double logXFrac = Math.log(xFrac);
double logYFrac = Math.log(yFrac);
double rhoC = rhoCSol * rhoCSun; // Sun's central mass density in cgs units
// Set up all the special Lane-Emden equation variables:
// Adiabatic gamma consistent with input polytropic index
double gammaPoly = (index + 1.0) / index;
// For convection criterion:
double gamThing = PhysData.gammaMono / (PhysData.gammaMono - 1.0);
// Initial Kay and lambda parameters from Lame-Embden equations:
/* Doesn't work
double Kay, KayTerm1, KayTerm2;
KayTerm1 = 3.0 * (1.0 - beta) / Useful.aStef();
KayTerm2 = Useful.k / beta / PhysData.muI(xFrac, yFrac, zFrac) / Useful.amu;
Kay = Math.pow(KayTerm1, 0.3333) * Math.pow(KayTerm2, 4.0 / 3.0);
*/
double Kay = 5.0e13; // hard wire to value at centre of Sun
double lambda, lamTerm, indxExp;
indxExp = (1.0 - index) / index;
lamTerm =
(index + 1.0) * Kay * Math.pow(rhoC, indxExp) / 4.0 / Math.PI / Useful.GConst;
lambda = Math.pow(lamTerm, 0.5);
System.out.println("Kay " + Kay + " lambda " + lambda);
// Dimensionless Lane-Emden Equation variables, xi and D_n(xi)
// xi is the independenet variable
// y(xi) is a helper function to separate the 2nd order Lane-Emden equation
// into two coupled 1st order equations
int maxNumDeps = 1000;
double[] xi = new double[maxNumDeps];
double[] DFunc = new double[maxNumDeps];
double[] yFunc = new double[maxNumDeps];
double deltaXi, deltaDFunc, deltaY, deltaYMag;
// double logDeltaXi, logDeltaD, logDeltaY, logDeltaYMag;
// Physical variables:
double[] radShell = new double[maxNumDeps]; // shell radial width
double[] tempShell = new double[maxNumDeps]; // kinetic temperature
double[] pressShell = new double[maxNumDeps]; // total pressure
double[] pGasShell = new double[maxNumDeps]; // gas pressure
double[] pRadShell = new double[maxNumDeps]; // radiation pressure
double[] rhoShell = new double[maxNumDeps]; // total fluid density
double[] massShell = new double[maxNumDeps]; // shell mass
double[] lumShell = new double[maxNumDeps]; // shell luminosity
double[] lumPpShell = new double[maxNumDeps]; // shell luminosity
double[] lumCnoShell = new double[maxNumDeps]; // shell luminosity
double[] epsShell = new double[maxNumDeps]; // total nuclear energy generation rate
double[] epsPpShell =
new double[maxNumDeps]; // nuclear p-p chain energy generation rate
double[] epsCnoShell =
new double[maxNumDeps]; // nuclear cno cycle energy generation rate
double[] kapShell = new double[maxNumDeps]; // mean opacity
double[] kapBfShell = new double[maxNumDeps]; // mean b-f opacity
double[] kapFfShell = new double[maxNumDeps]; // mean f-f opacity
double[] kapEsShell = new double[maxNumDeps]; // mean e^- scattering opacity
double[] kapHminShell = new double[maxNumDeps]; // mean H^- opacity
// cumulative quantities
double[] radInt = new double[maxNumDeps]; // interior radius
// double[] logRadInt = new double[maxNumDeps];
double[] massInt = new double[maxNumDeps]; // interior mass
double[] lumInt = new double[maxNumDeps]; // interior luminosity
double[] lumPpInt = new double[maxNumDeps]; // interior luminosity
double[] lumCnoInt = new double[maxNumDeps]; // interior luminosity
double[] gravInt = new double[maxNumDeps]; // acceleration of gravity
// Convection:
double[] dLnPdLnT = new double[maxNumDeps];
boolean[] convFlag = new boolean[maxNumDeps];
double RHS, logRHS, logRHSMag; // , logLastXi;
double xiSquare; // useful
// Try uniform spacing for now...
// We know that at surface, xi >~ 3.0
// guess at a good spacing for now...
// Surface value of dimensionless xi parameter is in
// range 3 to 7 for polytropic index 1.5 to 3.0
deltaXi = 10.0 / maxNumDeps;
// deltaXi = 0.04; //debug mode
// logDeltaXi = Math.log(deltaXi);
// For Newton-Raphson temperature recovery:
double firstTemp = 0.0;
// central bounday (initial) values:
// NOTE: we cannot set xi=0 - singularity
// We know that at surface, xi >~ 3.0
// guess at a good initial abscissa and spacing for now...
int j = 0;
xi[j] = 0.001;
yFunc[j] = 0.0;
DFunc[j] = 1.0;
// The stuff that follows...
radInt[j] = lambda * xi[j];
radShell[j] = radInt[j];
rhoShell[j] = rhoC * Math.pow(DFunc[j], index);
pressShell[j] = Kay * Math.pow(rhoShell[j], gammaPoly);
tempShell[j] =
NRtemp.getTemp(pressShell[j], rhoShell[j], xFrac, yFrac, zFrac, firstTemp);
// pGasShell[j] = beta * pressShell[j];
// pRadShell[j] = (1.0 - beta) * pressShell[j];
pGasShell[j] =
Useful.k
* rhoShell[j]
* tempShell[j]
/ PhysData.muI(xFrac, yFrac, zFrac)
/ Useful.amu;
pRadShell[j] = Useful.aStef() * Math.pow(tempShell[j], 4.0) / 3.0;
// tempShell[i] = pressShell[i] * PhysData.muI(xFrac, yFrac, zFrac) * Useful.amu /
// Useful.k / rhoShell[i];
massInt[j] = rhoC * 4.0 * Math.PI * Math.pow(radInt[j], 3) / 3.0;
massShell[j] = massInt[j];
if (tempShell[j] >= PhysData.fusionPPTemp) {
epsPpShell[j] =
Power.ppChain(tempShell[j], rhoShell[j], xFrac, zFrac); // H fusion p-p chain
epsCnoShell[j] =
Power.cnoCycle(tempShell[j], rhoShell[j], xFrac, zFrac); // H fusion CNO cycle
epsShell[j] = epsPpShell[j] + epsCnoShell[j];
// lumInt[j] = rhoC * 4.0 * Math.PI * Math.pow(radInt[j], 3) * epsShell[j] / 3.0;
lumPpInt[j] = rhoC * 4.0 * Math.PI * Math.pow(radInt[j], 3) * epsPpShell[j] / 3.0;
lumCnoInt[j] = rhoC * 4.0 * Math.PI * Math.pow(radInt[j], 3) * epsCnoShell[j] / 3.0;
lumPpShell[j] = lumPpInt[j];
lumCnoShell[j] = lumCnoInt[j];
lumInt[j] = lumPpInt[j] + lumCnoInt[j];
lumShell[j] = lumPpShell[j] + lumCnoShell[j];
} else {
epsPpShell[j] = 0.0; // H fusion p-p chain
epsCnoShell[j] = 0.0; // H fusion CNO cycle
epsShell[j] = 0.0;
// lumInt[j] = rhoC * 4.0 * Math.PI * Math.pow(radInt[j], 3) * epsShell[j] / 3.0;
lumPpInt[j] = 0.0;
lumCnoInt[j] = 0.0;
lumPpShell[j] = 0.0;
lumCnoShell[j] = 0.0;
lumInt[j] = 0.0;
lumShell[j] = 0.0;
}
kapBfShell[j] =
Kappa.kappaBfFn(tempShell[j], rhoShell[j], xFrac, zFrac); // b-f photo-ionization
kapFfShell[j] =
Kappa.kappaFfFn(tempShell[j], rhoShell[j], xFrac, zFrac); // f-f Bremsstrahlung
kapEsShell[j] =
Kappa.kappaEsFn(
tempShell[j], rhoShell[j], xFrac, zFrac); // Thomson e^- scattering
kapHminShell[j] =
Kappa.kappaHminFn(tempShell[j], rhoShell[j], xFrac, zFrac); // H^- b-f
kapShell[j] = kapBfShell[j] + kapFfShell[j] + kapEsShell[j] + kapHminShell[j];
gravInt[j] = Useful.GConst * massInt[j] / Math.pow(radInt[j], 2);
dLnPdLnT[j] = 0.0;
// 4th order Runge-Kutta (RK4) helper variables
double k1y, k2y, k3y, k4y;
double k1D, k2D, k3D, k4D;
double hHalf = deltaXi / 2.0;
double yHalf, DHalf, xiHalf;
double yFull, DFull, xiFull;
// System.out.println(" i " + " radius " + " massIn " + " lumInt "
// + " temp " + " press "
// + " rh " + " kappa " + " epsilon " + " dLnPdLnT " + "
// gravInt " + " pGas/PTot "
// + " convection? ");
// System.out.println(" i " + " radius " + " press " + " rho
// ");
// Master numerical integration loop:
// Loop exits when surface is found
// Try Euler's method for now...
// System.out.println("i xi[i] yFunc[i] DFunc[i] ");
int iSurf = 0;
int iCore = 0;
for (int i = 1; i < maxNumDeps; i++) {
xi[i] = xi[i - 1] + deltaXi;
/* Logarithmic - difficult due to signs
logLastXi = Math.log(xi[i - 1]);
//Start by advanceing helper function, y(xi):
logRHSMag = index * Math.log(DFunc[i - 1]) + 2.0 * logLastXi;
//RHS = -1.0 * Math.exp(logRHSMag);
logDeltaYMag = logRHSMag + logDeltaXi;
deltaYMag = Math.exp(logDeltaYMag);
deltaY = -1.0 * deltaYMag;
yFunc[i] = yFunc[i - 1] + deltaY;
//Now use the updated value of y to update D_n
logRHS = Math.log(yFunc[i]) - 2.0 * logLastXi;
logDeltaD = logRHS + logDeltaXi;
deltaDFunc = Math.exp(logDeltaD);
DFunc[i] = DFunc[i - 1] + deltaDFunc;
*/
//
xiSquare = Math.pow(xi[i - 1], 2);
xiHalf = Math.pow((xi[i - 1] + hHalf), 2);
xiFull = Math.pow(xi[i], 2);
//
/*
//Euler's method
//Start by advanceing helper function, y(xi):
RHS = -1.0 * Math.pow(DFunc[i - 1], index) * xiSquare;
deltaY = RHS * deltaXi;
yFunc[i] = yFunc[i - 1] + deltaY;
//Now use the updated value of y to update D_n
RHS = yFunc[i] / xiSquare;
deltaDFunc = RHS * deltaXi;
DFunc[i] = DFunc[i - 1] + deltaDFunc;
System.out.format("Euler: %03d %15.10f %15.10f %15.10f%n", i, xi[i], yFunc[i], DFunc[i]);
*/
// 4th order Runge-Kutta (RK4):
k1y = -1.0 * Math.pow(DFunc[i - 1], index) * xiSquare;
k1D = yFunc[i - 1] / xiSquare;
DHalf = DFunc[i - 1] + hHalf * k1D;
yHalf = yFunc[i - 1] + hHalf * k1y;
k2y = -1.0 * Math.pow(DHalf, index) * xiHalf;
k2D = yHalf / xiHalf;
DHalf = DFunc[i - 1] + hHalf * k2D;
yHalf = yFunc[i - 1] + hHalf * k2y;
k3y = -1.0 * Math.pow(DHalf, index) * xiHalf;
k3D = yHalf / xiHalf;
DFull = DFunc[i - 1] + deltaXi * k3D;
yFull = yFunc[i - 1] + deltaXi * k3y;
k4y = -1.0 * Math.pow(DFull, index) * xiFull;
k4D = yFull / xiFull;
deltaY = deltaXi * (k1y + 2.0 * k2y + 2.0 * k3y + k4y) / 6.0;
deltaDFunc = deltaXi * (k1D + 2.0 * k2D + 2.0 * k3D + k4D) / 6.0;
yFunc[i] = yFunc[i - 1] + deltaY;
DFunc[i] = DFunc[i - 1] + deltaDFunc;
// Are we there yet?
if ((DFunc[i] <= 0)
|| (Double.isNaN(DFunc[i]) == true)
|| (Double.isInfinite(DFunc[i]) == true)) {
break;
}
// System.out.format("RK4: %03d %15.10f %15.10f %15.10f%n", i, xi[i],
// yFunc[i], DFunc[i]);
radInt[i] = lambda * xi[i];
radShell[i] = radInt[i] - radInt[i - 1];
rhoShell[i] = rhoC * Math.pow(DFunc[i], index);
pressShell[i] = Kay * Math.pow(rhoShell[i], gammaPoly);
tempShell[i] =
NRtemp.getTemp(
pressShell[i], rhoShell[i], xFrac, yFrac, zFrac, tempShell[i - 1]);
// pGasShell[i] = beta * pressShell[i];
// pRadShell[i] = (1.0 - beta) * pressShell[i];
pGasShell[i] =
Useful.k
* rhoShell[i]
* tempShell[i]
/ PhysData.muI(xFrac, yFrac, zFrac)
/ Useful.amu;
pRadShell[i] = Useful.aStef() * Math.pow(tempShell[i], 4.0) / 3.0;
// tempShell[i] = pressShell[i] * PhysData.muI(xFrac, yFrac, zFrac) * Useful.amu /
// Useful.k / rhoShell[i];
massShell[i] = 4.0 * Math.PI * Math.pow(radInt[i], 2) * rhoShell[i] * radShell[i];
massInt[i] = massInt[i - 1] + massShell[i];
// epsShell[i] = Power.nuclear(tempShell[i], rhoShell[i], xFrac, zFrac);
if (tempShell[i] >= PhysData.fusionPPTemp) {
iCore = i;
epsPpShell[i] =
Power.ppChain(tempShell[i], rhoShell[i], xFrac, zFrac); // H fusion p-p chain
epsCnoShell[i] =
Power.cnoCycle(tempShell[i], rhoShell[i], xFrac, zFrac); // H fusion CNO cycle
epsShell[i] = epsPpShell[i] + epsCnoShell[i];
// lumShell[i] = 4.0 * Math.PI * Math.pow(radInt[i], 2) * rhoShell[i] *
// epsShell[i] * radShell[i];
lumPpShell[i] =
4.0
* Math.PI
* Math.pow(radInt[i], 2)
* rhoShell[i]
* epsPpShell[i]
* radShell[i];
lumCnoShell[i] =
4.0
* Math.PI
* Math.pow(radInt[i], 2)
* rhoShell[i]
* epsCnoShell[i]
* radShell[i];
lumShell[i] = lumPpShell[i] + lumCnoShell[i];
lumPpInt[i] = lumPpInt[i - 1] + lumPpShell[i];
lumCnoInt[i] = lumCnoInt[i - 1] + lumCnoShell[i];
lumInt[i] = lumInt[i - 1] + lumShell[i];
} else {
epsPpShell[i] = 0.0; // H fusion p-p chain
epsCnoShell[i] = 0.0; // H fusion CNO cycle
epsShell[i] = 0.0;
// lumShell[i] = 4.0 * Math.PI * Math.pow(radInt[i], 2) * rhoShell[i] *
// epsShell[i] * radShell[i];
lumPpShell[i] = 0.0;
lumCnoShell[i] =
4.0
* Math.PI
* Math.pow(radInt[i], 2)
* rhoShell[i]
* epsCnoShell[i]
* radShell[i];
lumShell[i] = 0.0;
lumPpInt[i] = lumPpInt[i - 1];
lumCnoInt[i] = lumCnoInt[i - 1];
lumInt[i] = lumInt[i - 1];
}
// kapShell[i] = Kappa.kappaFn(tempShell[i], rhoShell[i], xFrac, zFrac);
kapBfShell[i] =
Kappa.kappaBfFn(
tempShell[i], rhoShell[i], xFrac, zFrac); // b-f photo-ionization
kapFfShell[i] =
Kappa.kappaFfFn(tempShell[i], rhoShell[i], xFrac, zFrac); // f-f Bremsstrahlung
kapEsShell[i] =
Kappa.kappaEsFn(
tempShell[i], rhoShell[i], xFrac, zFrac); // Thomson e^- scattering
kapHminShell[i] =
Kappa.kappaHminFn(tempShell[i], rhoShell[i], xFrac, zFrac); // H^- b-f
kapShell[i] = kapBfShell[i] + kapFfShell[i] + kapEsShell[i] + kapHminShell[i];
gravInt[i] = Useful.GConst * massInt[i] / Math.pow(radInt[i], 2);
dLnPdLnT[i] =
(Math.log(pGasShell[i]) - Math.log(pGasShell[i - 1]))
/ (Math.log(tempShell[i]) - Math.log(tempShell[i - 1]));
if ((dLnPdLnT[i] >= gamThing)) {
// Radiative transport
convFlag[i] = false;
} else {
// Convective transport
convFlag[i] = true;
}
// Dynamically update Kay and lambda:
// Hmmm... these never seem to change, but let's update them anyway...
Kay = pressShell[i] / Math.pow(rhoShell[i], gammaPoly);
lamTerm =
(index + 1.0) * Kay * Math.pow(rhoC, indxExp) / 4.0 / Math.PI / Useful.GConst;
lambda = Math.pow(lamTerm, 0.5);
// System.out.println("Kay " + Kay + " lambda " + lambda);
// System.out.println(" i " + " radius " + " massInt " + "
// lumInt " + " temp " + " press "
// + " rho " + " kappa " + " epsilon " + "
// dLnPdLnT " + " gravInt " + " pGas/PTot "
// + " convection? ");
// System.out.println(" i " + " radius " + " press " + "
// rho ");
// System.out.format("%03d %10.6f %10.6f %10.6f %10.6f %10.6f %10.6f
// %10.6f %10.6f %10.6f %10.6f %10.6f %b%n",
// i, log10E * Math.log(radInt[i]), log10E * Math.log(massInt[i]), log10E *
// Math.log(lumInt[i]), log10E * Math.log(tempShell[i]),
// log10E * Math.log(pressShell[i]), log10E * Math.log(rhoShell[i]),
// kapShell[i], log10E * Math.log(epsShell[i]),
// dLnPdLnT[i], log10E * Math.log(gravInt[i]), pGasShell[i] / pressShell[i],
// convFlag[i]);
// System.out.format(" %03d %15.11f %15.11f %15.11f %15.11f
// %n",
// i, log10E * Math.log(radInt[i]), log10E * Math.log(pressShell[i]), log10E
// * Math.log(rhoShell[i]), log10E * Math.log(tempShell[i]));
// Surface boundary condition:
iSurf++;
}
int numDeps = iSurf;
System.out.println("Actual number of depths = " + numDeps);
// Independent total mass calculation:
// First derivative, dD_n/dXi at surface:
double dDFuncdXi = (DFunc[iSurf] - DFunc[iSurf - 1]) / (xi[iSurf] - xi[iSurf - 1]);
double totMass =
-4.0
* Math.PI
* Math.pow(lambda, 3.0)
* rhoC
* Math.pow(xi[iSurf], 2.0)
* dDFuncdXi;
System.out.println("Total analytic mass " + totMass);
// Results:
// cgs units:
double mass = massInt[numDeps];
double radius = radInt[numDeps];
double luminosity = lumInt[numDeps];
double surfTemp = tempShell[numDeps];
// Compute the effective temperature of the model:
double teff4 = luminosity / 4.0 / Math.PI / Math.pow(radius, 2.0) / Useful.sigma;
double teff = Math.pow(teff4, 0.25);
// solar units:
double massSol = mass / Useful.mSun;
double radiusSol = radius / Useful.rSun;
double lumSol = luminosity / Useful.lSun;
// Run the loop inward to build the optical depth scasle, tauIn:
//// No!While we're at it - find the nuclear burning core
double[] tauIn = new double[numDeps];
tauIn[numDeps - 1] = 0.0;
// int iCore = numDeps - 1;
for (int i = numDeps - 2; i == 0; i--) {
tauIn[i] = tauIn[i - 1] + rhoShell[i] * kapShell[i] * radShell[i];
// if (lumInt[i] > 0.99 * luminosity) {
// iCore--;
// }
}
// Report:
System.out.println("cgs units:");
System.out.println(
"Radius: "
+ log10E * Math.log(radius)
+ " Mass: "
+ log10E * Math.log(mass)
+ " Bol Luminosity: "
+ log10E * Math.log(luminosity));
System.out.println("Teff: " + teff + " TSurf: " + surfTemp);
System.out.println("Solar units:");
System.out.println(
"Radius: " + radiusSol + " Mass: " + massSol + " Bol Luminosity: " + lumSol);
System.out.println(
"Nuclear burning core fractional radius: " + (radInt[iCore] / radius));
// Compute spectral energy distribution (SED):
// wavelength grid (cm):
double[] waveSetup = new double[3];
waveSetup[0] = 100.0 * 1.0e-7; // test Start wavelength, cm
waveSetup[1] = 2000.0 * 1.0e-7; // test End wavelength, cm
waveSetup[2] = 100; // test number of lambda
int numWaves = (int) waveSetup[2];
double[] SED = new double[numWaves];
double[] waveGrid = new double[numWaves];
double thisWave, thisLogWave, logWave0, logWave1;
logWave0 = Math.log(waveSetup[0]);
logWave1 = Math.log(waveSetup[1]);
double deltaLogWave = (logWave1 - logWave0) / numWaves;
for (int i = 0; i < numWaves; i++) {
thisLogWave = logWave0 + ((double) i) * deltaLogWave;
thisWave = Math.exp(thisLogWave);
waveGrid[i] = thisWave;
SED[i] = Planck.planck(teff, thisWave);
// System.out.println(" " + waveGrid[i] + " " + SED[i]);
}
//
// double colors[] = new double[5];
double colors[] = Photometry.UBVRI(waveGrid, SED);
// All code before this line
String patternCol = "0.00";
// String pattern = "#####.##";
DecimalFormat colFormatter = new DecimalFormat(patternCol);
// // String patternWl = "0.00";
// //String pattern = "#####.##";
// DecimalFormat WlFormatter = new DecimalFormat(patternWl);
actiontarget.setText(
"Photometric color indices: "
+ "U-B: "
+ colFormatter.format(colors[0])
+ " B-V: "
+ colFormatter.format(colors[1])
+ " V-R: "
+ colFormatter.format(colors[2])
+ " V-I: "
+ colFormatter.format(colors[3])
+ " R-I: "
+ colFormatter.format(colors[4])
+ "\r\n");
// No! //grid.getChildren().add(r);
// Graphical output section:
/*
// Plot 1: T_Kin(radius):
LineChart<Number, Number> lineChartT2 = LineCharts.t2Plot(numDeps, radInt, tempShell);
grid.add(lineChartT2, 0, 9);
// Plot 2: log(P(radius):
LineChart<Number, Number> lineChartP = LineCharts.pressPlot(numDeps, radInt, pressShell, pGasShell, pRadShell);
grid.add(lineChartP, 2, 9);
// Plot 3: log rho:
LineChart<Number, Number> lineChartRho = LineCharts.rhoPlot(numDeps, radInt, rhoShell);
grid.add(lineChartRho, 2, 11);
// Plot 4: log cumulative L_Bol
LineChart<Number, Number> lineChartLum = LineCharts.lumPlot(numDeps, radInt, lumInt, lumPpInt, lumCnoInt);
grid.add(lineChartLum, 0, 10);
// Plot 5: log cumulative mass
LineChart<Number, Number> lineChartMass = LineCharts.massPlot(numDeps, radInt, massInt);
grid.add(lineChartMass, 2, 10);
// Plot 6: log epsilon (nuc power generation)
LineChart<Number, Number> lineChartEps = LineCharts.epsPlot(numDeps, radInt, epsShell, epsPpShell, epsCnoShell);
grid.add(lineChartEps, 0, 11);
// Plot 7: log kappa (mass extinction)
LineChart<Number, Number> lineChartKap = LineCharts.kapPlot(numDeps, radInt, kapShell, kapBfShell, kapFfShell, kapEsShell, kapHminShell);
grid.add(lineChartKap, 4, 10);
// Plot 8: log flux(lambda) (SED)
LineChart<Number, Number> lineChartSED = LineCharts.sedPlot(numWaves, waveGrid, SED);
grid.add(lineChartSED, 4, 11);
*/
// Graphical output section:
// Plot 1: T_Kin(radius):
LineChart<Number, Number> lineChartT2 = LineCharts.t2Plot(numDeps, radInt, tempShell);
grid.add(lineChartT2, 0, 9);
// Plot 2: log(P(radius):
LineChart<Number, Number> lineChartP =
LineCharts.pressPlot(numDeps, radInt, pressShell, pGasShell, pRadShell);
grid.add(lineChartP, 2, 9);
// Plot 3: log rho:
LineChart<Number, Number> lineChartRho =
LineCharts.rhoPlot(numDeps, radInt, rhoShell);
grid.add(lineChartRho, 2, 13);
// Plot 4: log cumulative L_Bol
LineChart<Number, Number> lineChartLum =
LineCharts.lumPlot(numDeps, iCore, radInt, lumInt, lumPpInt, lumCnoInt);
grid.add(lineChartLum, 0, 11);
// Plot 5: log cumulative mass
LineChart<Number, Number> lineChartMass =
LineCharts.massPlot(numDeps, radInt, massInt);
grid.add(lineChartMass, 2, 11);
// Plot 6: log epsilon (nuc power generation)
LineChart<Number, Number> lineChartEps =
LineCharts.epsPlot(numDeps, radInt, epsShell, epsPpShell, epsCnoShell);
grid.add(lineChartEps, 0, 13);
// Plot 7: log kappa (mass extinction)
LineChart<Number, Number> lineChartKap =
LineCharts.kapPlot(
numDeps, radInt, kapShell, kapBfShell, kapFfShell, kapEsShell, kapHminShell);
grid.add(lineChartKap, 4, 11);
// Plot 8: log flux(lambda) (SED)
LineChart<Number, Number> lineChartSED = LineCharts.sedPlot(numWaves, waveGrid, SED);
grid.add(lineChartSED, 4, 13);
// LineChart<Number, Number> lineChartSpec =
// LineCharts.specPlot(numMaster, masterLams, cosTheta, masterIntens, masterFlux);
// grid.add(lineChartSpec, 2, 10);
//// LineChart<Number, Number> lineChartLine = LineCharts.linePlot(numPoints,
// lineLambdas, cosTheta, lineProf, lam0);
// grid.add(lineChartLine, 4, 10);
// Debug versions of the function with parameters for plotting up quqntities used in
// line profile
// calculation:
// LineChart<Number, Number> lineChartLine = LineCharts.linePlot(numPoints,
// lineLambdas, cosTheta, logKappaL, lam0, kappa);
// grid.add(lineChartLine, 4, 10);
// LineChart<Number, Number> lineChartLine = LineCharts.linePlot(numPoints,
// lineLambdas, cosTheta, logTauL, lam0);
// grid.add(lineChartLine, 4, 10);
// Final scene / stage stuff:
// Scene scene = new Scene(grid, 1600, 900);
// scene.getStylesheets().add("../../GrayCascadeStyleSheet.css");
//
// primaryStage.setScene(scene);
//
// primaryStage.show();
} else {
actiontarget.setText("All fields must have values");
}
}
});
// Final scene / stage stuff:
Scene scene = new Scene(grid, 1600, 900);
// Stylesheet.css must go in /src/ directory
scene.getStylesheets().add("GrayCascadeStyleSheet.css");
primaryStage.setScene(scene);
primaryStage.show();
}