Ejemplo n.º 1
0
  /**
   * Sets the length of the log (number of messages returned by dump log
   *
   * @deprecated
   */
  public static Message setLogLen(short targetId, short offset) {
    CommandMsg cmdMessage = new CommandMsg(14);

    cmdMessage.set_nodeid(targetId);
    cmdMessage.set_fromBase((short) 1);
    cmdMessage.setElement_data(0, (byte) 'R');
    cmdMessage.setElement_data(1, (byte) 'e');
    cmdMessage.setElement_data(2, (byte) 's');
    cmdMessage.setElement_data(3, (byte) 'e');
    cmdMessage.setElement_data(4, (byte) 't');
    cmdMessage.setElement_data(5, (byte) 'L');
    cmdMessage.setElement_data(6, (byte) 'o');
    cmdMessage.setElement_data(7, (byte) 'g');
    cmdMessage.setElement_data(8, (byte) 0);
    cmdMessage.setElement_data(9, (byte) (offset & 0xFF));
    cmdMessage.setElement_data(10, (byte) ((targetId & 0xFF00) >> 8));

    return cmdMessage;
  }
Ejemplo n.º 2
0
  /**
   * Constrains the network topology to have the specified fanout
   *
   * @param targetId The ID of the mote that should receive this message
   * @param fanout The topology fanout. Motes are constrained to choose one of fanout parents (e.g.
   *     if fanout = 2, mote id 3 can pick motes 1 or 2 as a parent.)
   */
  public static Message setFanout(short targetId, char fanout) {
    CommandMsg cmdMessage = new CommandMsg(12);
    cmdMessage.set_nodeid(targetId);
    cmdMessage.set_fromBase((short) 1);
    cmdMessage.setElement_data(0, (byte) 'S');
    cmdMessage.setElement_data(1, (byte) 'e');
    cmdMessage.setElement_data(2, (byte) 't');
    cmdMessage.setElement_data(3, (byte) 'T');
    cmdMessage.setElement_data(4, (byte) 'o');
    cmdMessage.setElement_data(5, (byte) 'p');
    cmdMessage.setElement_data(6, (byte) 'o');
    cmdMessage.setElement_data(7, (byte) 0);
    cmdMessage.setElement_data(8, (byte) fanout);

    return cmdMessage;
  }
Ejemplo n.º 3
0
  /**
   * Causes the mote to spill the current contents of the EEPROM log
   *
   * @deprecated
   */
  public static Message dumpLog(short targetId) {
    CommandMsg cmdMessage = new CommandMsg(13);

    cmdMessage.set_nodeid(targetId);
    cmdMessage.set_fromBase((short) 1);
    cmdMessage.setElement_data(0, (byte) 'D');
    cmdMessage.setElement_data(1, (byte) 'u');
    cmdMessage.setElement_data(2, (byte) 'm');
    cmdMessage.setElement_data(3, (byte) 'p');
    cmdMessage.setElement_data(4, (byte) 'L');
    cmdMessage.setElement_data(5, (byte) 'o');
    cmdMessage.setElement_data(6, (byte) 'g');
    cmdMessage.setElement_data(7, (byte) 0);
    cmdMessage.setElement_data(8, (byte) 0);
    cmdMessage.setElement_data(9, (byte) 0);

    return cmdMessage;
  }
Ejemplo n.º 4
0
  /**
   * Fixed comm means that motes transmit in in the time slot corresponding to their local id * 2;
   * unfixed comm means mote xmit in a random slot selected uniformly in the range (0 .. local cell
   * size estimate)
   */
  public static Message setFixedComm(short targetId, boolean fixed) {
    CommandMsg cmdMessage = new CommandMsg(12);

    cmdMessage.set_nodeid(targetId);
    cmdMessage.set_fromBase((short) 1);

    cmdMessage.setElement_data(0, (byte) 'F');
    cmdMessage.setElement_data(1, (byte) 'i');
    cmdMessage.setElement_data(2, (byte) 'x');
    cmdMessage.setElement_data(3, (byte) 'C');
    cmdMessage.setElement_data(4, (byte) 'o');
    cmdMessage.setElement_data(5, (byte) 'm');
    cmdMessage.setElement_data(6, (byte) 'm');
    cmdMessage.setElement_data(7, (byte) 0);
    cmdMessage.setElement_data(8, fixed ? (byte) 1 : (byte) 0);

    return cmdMessage;
  }
Ejemplo n.º 5
0
  /**
   * Enabled "centralized" routing, where no aggregation is performed in network and data is simply
   * forwarded to the root.
   */
  public static Message setCentralized(short targetId, boolean centralized) {
    CommandMsg cmdMessage = new CommandMsg(12);

    cmdMessage.set_nodeid(targetId);
    cmdMessage.set_fromBase((short) 1);

    cmdMessage.setElement_data(0, (byte) 'S');
    cmdMessage.setElement_data(1, (byte) 'e');
    cmdMessage.setElement_data(2, (byte) 't');
    cmdMessage.setElement_data(3, (byte) 'C');
    cmdMessage.setElement_data(4, (byte) 'e');
    cmdMessage.setElement_data(5, (byte) 'n');
    cmdMessage.setElement_data(6, (byte) 't');
    cmdMessage.setElement_data(7, (byte) 0);
    cmdMessage.setElement_data(8, centralized ? (byte) 1 : (byte) 0);

    return cmdMessage;
  }
Ejemplo n.º 6
0
  /** Stop the magnetometer from oversampling (for power conservation) */
  public static Message stopMagCmd(short targetId) {
    CommandMsg cmdMessage = new CommandMsg(11);

    cmdMessage.set_nodeid(targetId);
    cmdMessage.set_fromBase((short) 1);
    cmdMessage.setElement_data(0, (byte) 'S');
    cmdMessage.setElement_data(1, (byte) 't');
    cmdMessage.setElement_data(2, (byte) 'o');
    cmdMessage.setElement_data(3, (byte) 'p');
    cmdMessage.setElement_data(4, (byte) 'M');
    cmdMessage.setElement_data(5, (byte) 'a');
    cmdMessage.setElement_data(6, (byte) 'g');
    cmdMessage.setElement_data(7, (byte) 0);

    return cmdMessage;
  }
Ejemplo n.º 7
0
  /**
   * The reset command resets motes (like toggling the power switch
   *
   * @param targetId The id of the mote that should receive this message
   */
  public static Message resetCmd(short targetId) {
    CommandMsg cmdMessage = new CommandMsg(9);

    cmdMessage.set_nodeid(targetId);
    cmdMessage.set_fromBase((short) 1);
    cmdMessage.setElement_data(0, (byte) 'R');
    cmdMessage.setElement_data(1, (byte) 'e');
    cmdMessage.setElement_data(2, (byte) 's');
    cmdMessage.setElement_data(3, (byte) 'e');
    cmdMessage.setElement_data(4, (byte) 't');
    cmdMessage.setElement_data(5, (byte) 0);

    return cmdMessage;
  }
Ejemplo n.º 8
0
  public static Message setSounderCmd(short targetId) {
    CommandMsg cmdMessage = new CommandMsg(12);

    cmdMessage.set_nodeid(targetId);

    cmdMessage.set_fromBase((short) 1);
    cmdMessage.setElement_data(0, (byte) 'S');
    cmdMessage.setElement_data(1, (byte) 'e');
    cmdMessage.setElement_data(2, (byte) 't');
    cmdMessage.setElement_data(3, (byte) 'S');
    cmdMessage.setElement_data(4, (byte) 'n');
    cmdMessage.setElement_data(5, (byte) 'd');
    cmdMessage.setElement_data(6, (byte) 0);
    cmdMessage.setElement_data(7, (byte) 0);
    cmdMessage.setElement_data(8, (byte) 2);

    return cmdMessage;
  }
Ejemplo n.º 9
0
  public static Message addAttrCmd(short targetId, char[] name, byte t, long val) {
    int namelen = name.length;
    int offset = 0;
    String cmd = "addattr";
    int cmdlen = cmd.length();

    if (namelen > 8) namelen = 8;

    CommandMsg cmdMessage =
        new CommandMsg(
            cmdlen
                + 1 /*null term*/
                + namelen
                + 1 /*null term*/
                + 5 /* t and val */
                + 2 /*targetId*/
                + 1 /* is from base */);
    cmdMessage.set_nodeid(targetId);

    cmdMessage.set_fromBase((short) 1);
    for (int i = 0; i < cmdlen; i++) {
      cmdMessage.setElement_data(offset++, (byte) cmd.charAt(i));
    }
    cmdMessage.setElement_data(offset++, (byte) 0); // null term
    for (int i = 0; i < namelen; i++) {
      cmdMessage.setElement_data(offset++, (byte) name[i]);
    }
    cmdMessage.setElement_data(offset++, (byte) 0); // null term
    cmdMessage.setElement_data(offset++, t); // type
    cmdMessage.setElement_data(offset++, (byte) (val & 0xFF));
    cmdMessage.setElement_data(offset++, (byte) ((val & 0xFF00) >> 8));
    cmdMessage.setElement_data(offset++, (byte) ((val & 0xFF0000) >> 16));
    cmdMessage.setElement_data(offset++, (byte) ((val & 0xFF000000) >> 24));

    return cmdMessage;
  }