/* (non-Javadoc)
* @see org.apache.batik.parser.PathHandler#curvetoQuadraticSmoothRel(float, float)
*/
public void curvetoQuadraticSmoothRel(float x, float y) throws ParseException {
if (verbose) System.out.println("curvetoQuadraticSmoothRel: " + x + "," + y);
Vertex lastPoint = pathPoints.getLast();
if (lastPoint instanceof BezierVertex
&& cubicBezVertTOQuadricControlPoint.get(lastPoint) != null) {
Vertex lastEndPoint =
new Vertex(
pathPoints.getLast().getX(),
pathPoints.getLast().getY(),
pathPoints.getLast().getZ());
// Get control point of last QuadTo
Vertex lastQuadControlPoint = cubicBezVertTOQuadricControlPoint.get(lastPoint);
cubicBezVertTOQuadricControlPoint.remove(lastPoint);
// Rotate that controlpoint around the end point of the last QuadTo
lastQuadControlPoint.rotateZ(lastEndPoint, 180);
// Put in startPoint = last QuadTo Endpoint of this smoothQuadTo, the calculated control
// point, and the endpoint of smoothQuadTo
BezierVertex b5 =
Tools3D.getCubicFromQuadraticCurve(
lastEndPoint,
lastQuadControlPoint,
new Vertex(lastPoint.getX() + x, lastPoint.getY() + y, 0));
// Save last quad control point
cubicBezVertTOQuadricControlPoint.put(b5, lastQuadControlPoint);
pathPoints.add(b5);
currentSubPath.add(b5);
} else {
if (verbose)
System.out.println(
"couldnt get last control point at curvetoQuadraticSmoothRel - using last point as the control point");
Vertex lastEndPoint = new Vertex(lastPoint.getX(), lastPoint.getY(), 0);
Vertex quadControlPoint = new Vertex(lastPoint.getX(), lastPoint.getY(), 0);
BezierVertex b5 =
Tools3D.getCubicFromQuadraticCurve(
lastEndPoint,
quadControlPoint,
new Vertex(lastPoint.getX() + x, lastPoint.getY() + y, 0));
cubicBezVertTOQuadricControlPoint.put(b5, quadControlPoint);
pathPoints.add(b5);
currentSubPath.add(b5);
}
}
/* (non-Javadoc)
* @see org.apache.batik.parser.PathHandler#arcAbs(float, float, float, boolean, boolean, float, float)
*/
public void arcAbs(
float rx, float ry, float phi, boolean large_arc, boolean sweep, float x, float y)
throws ParseException {
if (verbose)
System.out.println(
"arcAbs: "
+ rx
+ " "
+ ry
+ " "
+ phi
+ " "
+ large_arc
+ " "
+ sweep
+ " "
+ x
+ " "
+ y);
Vertex lastPoint = pathPoints.getLast();
List<Vertex> arcVertices =
Tools3D.arcTo(lastPoint.x, lastPoint.y, rx, ry, phi, large_arc, sweep, x, y, 40);
// Prevent odd picking behavour, in which the normal is
// not correctly computed, because the 2 points are the same
if (!arcVertices.isEmpty() && lastPoint != null && arcVertices.get(0).equalsVector(lastPoint)) {
arcVertices.remove(0);
}
pathPoints.addAll(arcVertices);
currentSubPath.addAll(arcVertices);
}
/*
* (non-Javadoc)
*
* @see
* org.mt4j.input.inputProcessors.IGestureEventListener#processGestureEvent
* (org.mt4j.input.inputProcessors.MTGestureEvent)
*/
public boolean processGestureEvent(MTGestureEvent ge) {
if (ge instanceof TapEvent) {
TapEvent te = (TapEvent) ge;
if (te.getTapID() == TapEvent.TAPPED) {
Vector3D w =
Tools3D.project(app, app.getCurrentScene().getSceneCam(), te.getLocationOnScreen());
Vector3D x = suggestionBox.globalToLocal(w);
float zero = suggestionBox.getVerticesLocal()[0].y;
float heightPerLine =
suggestionBox.getHeightXY(TransformSpace.LOCAL)
/ (float) (suggestionBox.getLineCount() + 1);
int line = (int) ((x.y - zero) / heightPerLine);
if (currentSuggestions.size() > line) {
try {
setText(currentSuggestions.get(line));
} catch (NullPointerException ex) {
setText("Error in MTSuggestionTextArea");
}
}
}
}
return false;
}
/* (non-Javadoc)
* @see org.apache.batik.parser.PathHandler#curvetoQuadraticRel(float, float, float, float)
*/
public void curvetoQuadraticRel(float x1, float y1, float x, float y) throws ParseException {
if (verbose) System.out.println("curvetoQuadraticRel: " + x1 + "," + y1 + " " + x + "," + y);
if (!pathPoints.isEmpty() && pathPoints.getLast() != null) {
Vertex lastPoint = pathPoints.getLast();
Vertex lastEndPoint = new Vertex(lastPoint.getX(), lastPoint.getY(), lastPoint.getZ());
Vertex quadControlPoint = new Vertex(lastPoint.getX() + x1, lastPoint.getY() + y1, 0);
// Put in startPoint = last QuadTo Endpoint of this smoothQuadTo, the calculated control
// point, and the endpoint of smoothQuadTo
BezierVertex b5 =
Tools3D.getCubicFromQuadraticCurve(
lastEndPoint,
quadControlPoint,
new Vertex(lastPoint.getX() + x, lastPoint.getY() + y, 0));
cubicBezVertTOQuadricControlPoint.put(b5, quadControlPoint);
pathPoints.add(b5);
currentSubPath.add(b5);
} else {
System.out.println("last point null at curvetoQuadraticRel");
}
}
/**
* Assigns the texture.
*
* @param pathToModel
* @param modelFile
* @param scene
* @param m
* @param sceneMaterialID
* @param mesh
*/
private void assignMaterial(
String pathToModel,
File modelFile,
Scene3ds scene,
Mesh3ds m,
int sceneMaterialID,
MTTriangleMesh mesh) {
if (scene.materials() > 0) {
if (m.faceMats() > 0) {
// Just take the first material in the mesh, it could have more but we dont support more
// than 1 material for a mesh
// materialIndexForMesh = m.faceMat(0).matIndex();
Material3ds mat = scene.material(sceneMaterialID);
String materialName = mat.name();
if (debug)
logger.debug(
"Material name for mesh \"" + mesh.getName() + ":-> \"" + materialName + "\"");
materialName.trim();
materialName.toLowerCase();
// Try to load texture
try {
PImage cachedImage = textureCache.get(materialName);
if (cachedImage != null) {
mesh.setTexture(cachedImage);
mesh.setTextureEnabled(true);
if (debug) logger.debug("->Loaded texture from CACHE : \"" + materialName + "\"");
return;
}
if (modelFile.exists()) { // If model is loaded from local file system
String modelFolder =
modelFile
.getParent(); // pathToModel.substring(),
// pathToModel.lastIndexOf(File.pathSeparator)
File modelFolderFile = new File(modelFolder);
if (modelFolderFile.exists() && modelFolderFile.isDirectory())
modelFolder = modelFolderFile.getAbsolutePath();
else {
modelFolder = "";
}
String[] suffix =
new String[] {
"jpg", "JPG", "tga", "TGA", "bmp", "BMP", "png", "PNG", "tiff", "TIFF"
};
for (int j = 0; j < suffix.length; j++) {
String suffixString = suffix[j];
// Try to load and set texture to mesh
String texturePath =
modelFolder + MTApplication.separator + materialName + "." + suffixString;
File textureFile = new File(texturePath);
if (textureFile.exists()) {
boolean success = textureFile.renameTo(new File(texturePath));
if (!success) {
// File was not successfully renamed
logger.debug("failed to RENAME file: " + textureFile.getAbsolutePath());
}
PImage texture = null;
if (MT4jSettings.getInstance().isOpenGlMode()) { // TODO check if render thread
PImage img = pa.loadImage(texturePath);
if (Tools3D.isPowerOfTwoDimension(img)) {
texture =
new GLTexture(
pa,
img,
new GLTextureSettings(
TEXTURE_TARGET.TEXTURE_2D,
SHRINKAGE_FILTER.Trilinear,
EXPANSION_FILTER.Bilinear,
WRAP_MODE.REPEAT,
WRAP_MODE.REPEAT));
} else {
texture =
new GLTexture(
pa,
img,
new GLTextureSettings(
TEXTURE_TARGET.RECTANGULAR,
SHRINKAGE_FILTER.Trilinear,
EXPANSION_FILTER.Bilinear,
WRAP_MODE.REPEAT,
WRAP_MODE.REPEAT));
// ((GLTexture)texture).setFilter(SHRINKAGE_FILTER.BilinearNoMipMaps,
// EXPANSION_FILTER.Bilinear);
}
} else {
texture = pa.loadImage(texturePath);
}
mesh.setTexture(texture);
mesh.setTextureEnabled(true);
textureCache.put(materialName, texture);
if (debug) logger.debug("->Loaded material texture: \"" + materialName + "\"");
break;
}
if (j + 1 == suffix.length) {
logger.error("Couldnt load material texture: \"" + materialName + "\"");
}
}
} else { // Probably loading from jar file
PImage texture = null;
String[] suffix =
new String[] {
"jpg", "JPG", "tga", "TGA", "bmp", "BMP", "png", "PNG", "tiff", "TIFF"
};
for (String suffixString : suffix) {
String modelFolder =
pathToModel.substring(0, pathToModel.lastIndexOf(MTApplication.separator));
String texturePath =
modelFolder + MTApplication.separator + materialName + "." + suffixString;
if (MT4jSettings.getInstance().isOpenGlMode()) {
PImage img = pa.loadImage(texturePath);
if (Tools3D.isPowerOfTwoDimension(img)) {
texture =
new GLTexture(
pa,
img,
new GLTextureSettings(
TEXTURE_TARGET.TEXTURE_2D,
SHRINKAGE_FILTER.Trilinear,
EXPANSION_FILTER.Bilinear,
WRAP_MODE.REPEAT,
WRAP_MODE.REPEAT));
} else {
texture =
new GLTexture(
pa,
img,
new GLTextureSettings(
TEXTURE_TARGET.RECTANGULAR,
SHRINKAGE_FILTER.Trilinear,
EXPANSION_FILTER.Bilinear,
WRAP_MODE.REPEAT,
WRAP_MODE.REPEAT));
// ((GLTexture)texture).setFilter(SHRINKAGE_FILTER.BilinearNoMipMaps,
// EXPANSION_FILTER.Bilinear);
}
} else {
texture = pa.loadImage(texturePath);
}
mesh.setTexture(texture);
mesh.setTextureEnabled(true);
textureCache.put(materialName, texture);
if (debug) logger.debug("->Loaded material texture: \"" + materialName + "\"");
break;
}
}
} catch (Exception e) {
logger.error(e.getMessage());
}
} // if (m.faceMats() > 0)
} // if (scene.materials() > 0)
}
// FIXME TEST -> adapt tex coords for non fitting, NPOT gl texture
private void adaptTexCoordsForNPOTUse() {
PImage tex = this.getTexture();
if (tex instanceof GLTexture) {
Tools3D.adaptTextureCoordsNPOT(this, (GLTexture) tex);
}
}
/**
* Instantiates a new model display scene.
*
* @param mtApplication the mt application
* @param name the name
*/
public Space3DScene(MTApplication mtApplication, String name) {
super(mtApplication, name);
this.pa = mtApplication;
if (!MT4jSettings.getInstance().isOpenGlMode()) {
System.err.println("Scene only usable when using the OpenGL renderer! - See settings.txt");
return;
}
this.setClearColor(new MTColor(200, 200, 200, 255));
this.registerGlobalInputProcessor(new CursorTracer(pa, this));
// Add a background image for the scene
this.getCanvas()
.addChild(new MTBackgroundImage(pa, pa.loadImage(imagesPath + "3040.jpg"), true));
// Init light settings
MTLight.enableLightningAndAmbient(pa, 150, 150, 150, 255);
// Create a light source //I think GL_LIGHT0 is used by processing!
// MTLight light = new MTLight(pa, GL.GL_LIGHT3, new Vector3D(0,0,0));
MTLight light = new MTLight(pa, GL.GL_LIGHT3, new Vector3D(pa.width / 5f, -pa.height / 10f, 0));
// Set up a material to react to the light
GLMaterial material = new GLMaterial(Tools3D.getGL(pa));
material.setAmbient(new float[] {.1f, .1f, .1f, 1f});
material.setDiffuse(new float[] {1.0f, 1.0f, 1.0f, 1f});
material.setEmission(new float[] {.0f, .0f, .0f, 1f});
material.setSpecular(new float[] {1.0f, 1.0f, 1.0f, 1f}); // almost white: very reflective
material.setShininess(127); // 0=no shine, 127=max shine
// Create the earth
earth = new MTSphere(pa, "earth", 40, 40, 80, TextureMode.Projected); // TextureMode.Polar);
earth.setLight(light);
earth.setMaterial(material);
earth.rotateX(earth.getCenterPointRelativeToParent(), -90);
earth.setTexture(
new GLTexture(
pa,
imagesPath + "worldMap.jpg",
new GLTextureSettings(
TEXTURE_TARGET.TEXTURE_2D,
SHRINKAGE_FILTER.Trilinear,
EXPANSION_FILTER.Bilinear,
WRAP_MODE.CLAMP_TO_EDGE,
WRAP_MODE.CLAMP_TO_EDGE)));
earth.generateAndUseDisplayLists();
earth.setPositionGlobal(
new Vector3D(
pa.width / 2f,
pa.height / 2f,
250)); // earth.setPositionGlobal(new Vector3D(200, 200, 250));
// Animate earth rotation
new Animation(
"rotation animation", new MultiPurposeInterpolator(0, 360, 17000, 0, 1, -1), earth)
.addAnimationListener(
new IAnimationListener() {
public void processAnimationEvent(AnimationEvent ae) {
earth.rotateY(earth.getCenterPointLocal(), ae.getDelta(), TransformSpace.LOCAL);
}
})
.start();
// Put planets in a group that can be manipulated by gestures
// so the rotation of the planets doesent get changed by the gestures
MTComponent group = new MTComponent(mtApplication);
group.setComposite(
true); // This makes the group "consume" all picking and gestures of the children
group.registerInputProcessor(new DragProcessor(mtApplication));
group.addGestureListener(DragProcessor.class, new DefaultDragAction());
group.addGestureListener(DragProcessor.class, new InertiaDragAction(80, 0.8f, 10));
group.registerInputProcessor(new RotateProcessor(mtApplication));
group.addGestureListener(RotateProcessor.class, new DefaultRotateAction());
// Scale the earth from the center. Else it might get distorted
group.registerInputProcessor(new ScaleProcessor(mtApplication));
group.addGestureListener(
ScaleProcessor.class,
new IGestureEventListener() {
public boolean processGestureEvent(MTGestureEvent ge) {
ScaleEvent se = (ScaleEvent) ge;
earth.scaleGlobal(
se.getScaleFactorX(),
se.getScaleFactorY(),
se.getScaleFactorX(),
earth.getCenterPointGlobal());
return false;
}
});
this.getCanvas().addChild(group);
group.addChild(earth);
// Create the moon
final MTSphere moonSphere = new MTSphere(pa, "moon", 35, 35, 25, TextureMode.Polar);
moonSphere.setMaterial(material);
moonSphere.translate(new Vector3D(earth.getRadius() + moonSphere.getRadius() + 50, 0, 0));
moonSphere.setTexture(
new GLTexture(
pa,
imagesPath + "moonmap1k.jpg",
new GLTextureSettings(
TEXTURE_TARGET.RECTANGULAR,
SHRINKAGE_FILTER.Trilinear,
EXPANSION_FILTER.Bilinear,
WRAP_MODE.CLAMP_TO_EDGE,
WRAP_MODE.CLAMP_TO_EDGE)));
moonSphere.generateAndUseDisplayLists();
moonSphere.unregisterAllInputProcessors();
// Rotate the moon around the earth
new Animation(
"moon animation", new MultiPurposeInterpolator(0, 360, 12000, 0, 1, -1), moonSphere)
.addAnimationListener(
new IAnimationListener() {
public void processAnimationEvent(AnimationEvent ae) {
moonSphere.rotateZ(
earth.getCenterPointLocal(), ae.getDelta(), TransformSpace.RELATIVE_TO_PARENT);
}
})
.start();
// Rotate the moon around ints own center
new Animation(
"moon animation around own axis",
new MultiPurposeInterpolator(0, 360, 9000, 0, 1, -1),
moonSphere)
.addAnimationListener(
new IAnimationListener() {
public void processAnimationEvent(AnimationEvent ae) {
moonSphere.rotateZ(
moonSphere.getCenterPointLocal(), -3 * ae.getDelta(), TransformSpace.LOCAL);
moonSphere.rotateY(
moonSphere.getCenterPointLocal(), 0.5f * ae.getDelta(), TransformSpace.LOCAL);
}
})
.start();
earth.addChild(moonSphere);
}
