/**
* Rewrites a move instruction if it has 2 memory operands. One of the 2 memory operands must be a
* stack location operand. Move the SP to the appropriate location and use a push or pop
* instruction.
*
* @param s the instruction to rewrite
*/
private void rewriteMoveInstruction(Instruction s) {
// first attempt to mutate the move into a noop
if (mutateMoveToNop(s)) return;
Operand result = MIR_Move.getResult(s);
Operand val = MIR_Move.getValue(s);
if (result instanceof StackLocationOperand) {
if (val instanceof MemoryOperand || val instanceof StackLocationOperand) {
int offset = ((StackLocationOperand) result).getOffset();
byte size = ((StackLocationOperand) result).getSize();
offset = FPOffset2SPOffset(offset) + size;
moveESPBefore(s, offset);
MIR_UnaryNoRes.mutate(s, IA32_PUSH, val);
}
} else {
if (result instanceof MemoryOperand) {
if (val instanceof StackLocationOperand) {
int offset = ((StackLocationOperand) val).getOffset();
offset = FPOffset2SPOffset(offset);
moveESPBefore(s, offset);
MIR_Nullary.mutate(s, IA32_POP, result);
}
}
}
}
/**
* expand an FCLEAR pseudo-insruction using FFREEs.
*
* @param s the instruction to expand
* @param ir the containing IR
*/
private static void expandFClear(Instruction s, IR ir) {
int nSave = MIR_UnaryNoRes.getVal(s).asIntConstant().value;
int fpStackHeight = ir.MIRInfo.fpStackHeight;
PhysicalRegisterSet phys = ir.regpool.getPhysicalRegisterSet().asIA32();
for (int i = nSave; i < fpStackHeight; i++) {
Register f = phys.getFPR(i);
s.insertBefore(MIR_Nullary.create(IA32_FFREE, D(f)));
}
// Remove the FCLEAR.
s.remove();
}
/**
* Insert the epilogue before a particular return instruction.
*
* @param ret the return instruction.
*/
private void insertEpilogue(Instruction ret) {
// 1. Restore any saved registers
if (ir.compiledMethod.isSaveVolatile()) {
restoreVolatileRegisters(ret);
restoreFloatingPointState(ret);
}
restoreNonVolatiles(ret);
// 2. Restore caller's stackpointer and framepointer
int frameSize = getFrameFixedSize();
ret.insertBefore(MIR_UnaryNoRes.create(REQUIRE_ESP, IC(frameSize)));
MemoryOperand fpHome =
MemoryOperand.BD(
ir.regpool.makeTROp(),
ArchEntrypoints.framePointerField.getOffset(),
(byte) WORDSIZE,
null,
null);
ret.insertBefore(MIR_Nullary.create(IA32_POP, fpHome));
}
/**
* Walks through the IR. For each StackLocationOperand, replace the operand with the appropriate
* MemoryOperand.
*/
private void rewriteStackLocations() {
// ESP is initially WORDSIZE above where the framepointer is going to be.
ESPOffset = getFrameFixedSize() + WORDSIZE;
Register ESP = ((PhysicalRegisterSet) ir.regpool.getPhysicalRegisterSet()).getESP();
boolean seenReturn = false;
for (Enumeration<Instruction> e = ir.forwardInstrEnumerator(); e.hasMoreElements(); ) {
Instruction s = e.nextElement();
if (s.isReturn()) {
seenReturn = true;
continue;
}
if (s.isBranch()) {
// restore ESP to home location at end of basic block.
moveESPBefore(s, 0);
continue;
}
if (s.operator() == BBEND) {
if (seenReturn) {
// at a return ESP will be at FrameFixedSize,
seenReturn = false;
ESPOffset = 0;
} else {
moveESPBefore(s, 0);
}
continue;
}
if (s.operator() == ADVISE_ESP) {
ESPOffset = MIR_UnaryNoRes.getVal(s).asIntConstant().value;
continue;
}
if (s.operator() == REQUIRE_ESP) {
// ESP is required to be at the given offset from the bottom of the frame
moveESPBefore(s, MIR_UnaryNoRes.getVal(s).asIntConstant().value);
continue;
}
if (s.operator() == YIELDPOINT_PROLOGUE
|| s.operator() == YIELDPOINT_BACKEDGE
|| s.operator() == YIELDPOINT_EPILOGUE) {
moveESPBefore(s, 0);
continue;
}
if (s.operator() == IA32_MOV) {
rewriteMoveInstruction(s);
}
// pop computes the effective address of its operand after ESP
// is incremented. Therefore update ESPOffset before rewriting
// stacklocation and memory operands.
if (s.operator() == IA32_POP) {
ESPOffset += WORDSIZE;
}
for (Enumeration<Operand> ops = s.getOperands(); ops.hasMoreElements(); ) {
Operand op = ops.nextElement();
if (op instanceof StackLocationOperand) {
StackLocationOperand sop = (StackLocationOperand) op;
int offset = sop.getOffset();
if (sop.isFromTop()) {
offset = FPOffset2SPOffset(offset);
}
offset -= ESPOffset;
byte size = sop.getSize();
MemoryOperand M =
MemoryOperand.BD(
new RegisterOperand(ESP, PRIMITIVE_TYPE_FOR_WORD),
Offset.fromIntSignExtend(offset),
size,
null,
null);
s.replaceOperand(op, M);
} else if (op instanceof MemoryOperand) {
MemoryOperand M = op.asMemory();
if ((M.base != null && M.base.getRegister() == ESP)
|| (M.index != null && M.index.getRegister() == ESP)) {
M.disp = M.disp.minus(ESPOffset);
}
}
}
// push computes the effective address of its operand after ESP
// is decremented. Therefore update ESPOffset after rewriting
// stacklocation and memory operands.
if (s.operator() == IA32_PUSH) {
ESPOffset -= WORDSIZE;
}
}
}
/**
* Insert the prologue for a normal method.
*
* <p>Assume we are inserting the prologue for method B called from method A.
*
* <ul>
* <li>Perform a stack overflow check.
* <li>Store a back pointer to A's frame
* <li>Store B's compiled method id
* <li>Adjust frame pointer to point to B's frame
* <li>Save any used non-volatile registers
* </ul>
*/
@Override
public void insertNormalPrologue() {
PhysicalRegisterSet phys = (PhysicalRegisterSet) ir.regpool.getPhysicalRegisterSet();
Register ESP = phys.getESP();
MemoryOperand fpHome =
MemoryOperand.BD(
ir.regpool.makeTROp(),
ArchEntrypoints.framePointerField.getOffset(),
(byte) WORDSIZE,
null,
null);
// the prologue instruction
Instruction plg = ir.firstInstructionInCodeOrder().nextInstructionInCodeOrder();
// inst is the instruction immediately after the IR_PROLOGUE
// instruction
Instruction inst = plg.nextInstructionInCodeOrder();
int frameFixedSize = getFrameFixedSize();
ir.compiledMethod.setFrameFixedSize(frameFixedSize);
// I. Buy a stackframe (including overflow check)
// NOTE: We play a little game here. If the frame we are buying is
// very small (less than 256) then we can be sloppy with the
// stackoverflow check and actually allocate the frame in the guard
// region. We'll notice when this frame calls someone and take the
// stackoverflow in the callee. We can't do this if the frame is too big,
// because growing the stack in the callee and/or handling a hardware trap
// in this frame will require most of the guard region to complete.
// See libvm.C.
if (frameFixedSize >= 256) {
// 1. Insert Stack overflow check.
insertBigFrameStackOverflowCheck(plg);
// 2. Save caller's frame pointer
inst.insertBefore(MIR_UnaryNoRes.create(IA32_PUSH, fpHome));
// 3. Set my frame pointer to current value of stackpointer
inst.insertBefore(
MIR_Move.create(
IA32_MOV, fpHome.copy(), new RegisterOperand(ESP, PRIMITIVE_TYPE_FOR_WORD)));
// 4. Store my compiled method id
int cmid = ir.compiledMethod.getId();
inst.insertBefore(MIR_UnaryNoRes.create(IA32_PUSH, VM.BuildFor32Addr ? IC(cmid) : LC(cmid)));
} else {
// 1. Save caller's frame pointer
inst.insertBefore(MIR_UnaryNoRes.create(IA32_PUSH, fpHome));
// 2. Set my frame pointer to current value of stackpointer
inst.insertBefore(
MIR_Move.create(
IA32_MOV, fpHome.copy(), new RegisterOperand(ESP, PRIMITIVE_TYPE_FOR_WORD)));
// 3. Store my compiled method id
int cmid = ir.compiledMethod.getId();
inst.insertBefore(MIR_UnaryNoRes.create(IA32_PUSH, VM.BuildFor32Addr ? IC(cmid) : LC(cmid)));
// 4. Insert Stack overflow check.
insertNormalStackOverflowCheck(plg);
}
// II. Save any used volatile and non-volatile registers
if (ir.compiledMethod.isSaveVolatile()) {
saveVolatiles(inst);
saveFloatingPointState(inst);
}
saveNonVolatiles(inst);
}
