示例#1
0
  /**
   * loadCache is called automatically on startup of the cache factory, as a result of implementing
   * the CacheLoader interface. This should be used to load any data that needs loading, and to set
   * up variables.
   *
   * @throws InitializationException
   */
  @Override
  public void loadCache(String ResourceName, String CacheName) throws InitializationException {
    // Variable definitions
    String tmpValue;

    // Get the number of key fields (the rest are treated as results)
    tmpValue =
        PropertyUtils.getPropertyUtils()
            .getDataCachePropertyValueDef(ResourceName, CacheName, "KeyFields", "None");
    if (tmpValue.equals("None")) {
      // We will use calculate the default assuming 1 result field
      KeyFormFactor = 0;
    } else {
      try {
        KeyFormFactor = Integer.parseInt(tmpValue);
      } catch (NumberFormatException nfe) {
        message =
            "KeyFields entry for cache <"
                + getSymbolicName()
                + "> not numeric. Found value <"
                + tmpValue
                + ">";
        OpenRate.getOpenRateFrameworkLog().error(message);
        throw new InitializationException(message, getSymbolicName());
      }
    }

    // Now perform the base initialisation
    super.loadCache(ResourceName, CacheName);
  }
示例#2
0
  /**
   * Add a CPI (CustomerProductInstance) value into the CustomerCache
   *
   * @param custId The customer ID to add the product to
   * @param service The service of the product
   * @param subscription The subscription ID
   * @param prodID The product identifier
   * @param validFrom The start of the product validity
   * @param validTo The end of the product validity
   * @param orderId The JBilling order ID
   * @param orderLineId The JBilling order line ID
   * @param quantity The order line quantity
   */
  public void addCPI(
      int custId,
      String service,
      String subscription,
      String prodID,
      long validFrom,
      long validTo,
      int orderId,
      int orderLineId,
      int quantity) {
    CustInfo tmpCustInfo;
    CustProductInfo tmpCPI;

    // See if we already have ID for this customer
    if (custIDCache.containsKey(custId)) {
      // Create the new entry for the customer ID
      tmpCustInfo = custIDCache.get(custId);
      tmpCPI = new CustProductInfo();
      tmpCPI.Service = service;
      tmpCPI.Subscription = subscription;
      tmpCPI.ProductID = prodID;
      tmpCPI.UTCValidFrom = validFrom;
      tmpCPI.UTCValidTo = validTo - 1; // exclude the last second
      tmpCPI.OrderId = orderId;
      tmpCPI.OrderLineId = orderLineId;
      tmpCPI.Quantity = quantity;
      tmpCustInfo.CPI.add(tmpCustInfo.productCount, tmpCPI);
      tmpCustInfo.productCount++;
    } else {
      // Otherwise write an error and ignore it
      OpenRate.getOpenRateFrameworkLog()
          .error("Customer ID <" + custId + "> not found. Add CPI failed.");
    }
  }
示例#3
0
  /** Dumps the entire contents of the cache to the Log. */
  protected void DumpMapData() {
    String Helper;
    Iterator<String> GroupIter;
    Iterator<SearchMap> PatternIterator;
    Iterator<String> CDIterator;
    SearchGroup tmpSearchGroup;
    SearchMap tmpSearchMap;
    String PrintHelper;
    int counter = 0;

    OpenRate.getOpenRateFrameworkLog()
        .info("Dumping Map Data for RegexMatchCache <" + getSymbolicName() + ">");
    OpenRate.getOpenRateFrameworkLog().info("Groups:");

    // Iterate thorough the entries in the group
    GroupIter = GroupCache.keySet().iterator();
    while (GroupIter.hasNext()) {
      Helper = GroupIter.next();
      OpenRate.getOpenRateFrameworkLog().info("  " + Helper);
    }

    // Now dump the data
    GroupIter = GroupCache.keySet().iterator();
    while (GroupIter.hasNext()) {
      Helper = GroupIter.next();
      OpenRate.getOpenRateFrameworkLog().info("Dumping group map data for <" + Helper + ">");
      tmpSearchGroup = GroupCache.get(Helper);
      PatternIterator = tmpSearchGroup.SearchGroup.iterator();

      while (PatternIterator.hasNext()) {
        OpenRate.getOpenRateFrameworkLog().info("===ENTRY " + counter + "===");
        counter++;
        PrintHelper = "  (";

        tmpSearchMap = PatternIterator.next();
        for (int i = 0; i < tmpSearchMap.matchPattern.length; i++) {
          PrintHelper =
              PrintHelper
                  + "["
                  + tmpSearchMap.matchType[i]
                  + ":"
                  + tmpSearchMap.matchPattern[i]
                  + ":"
                  + tmpSearchMap.matchValue[i]
                  + "] ";
        }

        // dump the result array
        PrintHelper += ") --> (";

        CDIterator = tmpSearchMap.Results.iterator();
        while (CDIterator.hasNext()) {
          PrintHelper = PrintHelper + CDIterator.next() + ",";
        }

        PrintHelper += ")";
        OpenRate.getOpenRateFrameworkLog().info(PrintHelper);
      }
    }
  }
示例#4
0
  /**
   * Return the value of the balance group so that we are able to update it during the logic
   * processing. This is to make sure that we have all the information necessary when we start the
   * calculation.
   *
   * @param CustId The customer ID
   * @return The balance group
   */
  public int getBalanceGroup(int CustId) {
    CustInfo tmpCustInfo;

    // See if we already have ID for this customer
    if (custIDCache.containsKey(CustId)) {
      // Get the product information
      tmpCustInfo = custIDCache.get(CustId);

      return tmpCustInfo.balanceGroup;
    } else {
      // Otherwise write an error and ignore it
      OpenRate.getOpenRateFrameworkLog()
          .error("Customer ID <" + CustId + "> not found. Lookup failed.");
    }

    return 0;
  }
示例#5
0
  /**
   * processControlEvent is the method that will be called when an event is received for a module
   * that has registered itself as a client of the External Control Interface
   *
   * @param Command - command that is understand by the client module
   * @param Init - we are performing initial configuration if true
   * @param Parameter - parameter for the command
   * @return The result string of the operation
   */
  @Override
  public String processControlEvent(String Command, boolean Init, String Parameter) {
    SearchGroup tmpSearchGroup;
    Collection<String> tmpGroups;
    Iterator<String> GroupIter;
    String tmpGroupName;
    int Objects = 0;
    int ResultCode = -1;

    // Return the number of objects in the cache
    if (Command.equalsIgnoreCase(SERVICE_GROUP_COUNT)) {
      return Integer.toString(GroupCache.size());
    }

    if (Command.equalsIgnoreCase(SERVICE_OBJECT_COUNT)) {
      tmpGroups = GroupCache.keySet();
      GroupIter = tmpGroups.iterator();

      while (GroupIter.hasNext()) {
        tmpGroupName = GroupIter.next();
        tmpSearchGroup = GroupCache.get(tmpGroupName);
        Objects += tmpSearchGroup.SearchGroup.size();
      }

      return Integer.toString(Objects);
    }

    // Return the number of objects in the cache
    if (Command.equalsIgnoreCase(SERVICE_DUMP_MAP)) {
      // onl< dump on a positive command
      if (Parameter.equalsIgnoreCase("true")) {
        DumpMapData();
      }

      ResultCode = 0;
    }

    if (ResultCode == 0) {
      OpenRate.getOpenRateFrameworkLog()
          .debug(LogUtil.LogECICacheCommand(getSymbolicName(), Command, Parameter));

      return "OK";
    } else {
      return super.processControlEvent(Command, Init, Parameter);
    }
  }
示例#6
0
  /**
   * Get the products that are attached to the customer account, using the alias to locate the
   * account
   *
   * @param alias The alias to the customer account
   * @param service The service
   * @param subscription The subscription to get products for
   * @param CDRDate The date to retrieve the products for
   * @return The product list
   */
  public ProductList getProducts(String alias, String service, String subscription, long CDRDate) {
    int custID;

    // See if we already have ID for this customer
    if (aliasCache.containsKey(alias)) {
      // Get the poid from the Alias
      custID = getCustId(alias, CDRDate);

      // Get the products
      return getProducts(custID, service, subscription, CDRDate);
    } else {
      // We could find no alias
      OpenRate.getOpenRateFrameworkLog().error("Alias <" + alias + "> not found. Lookup failed.");

      // Just return null
      return null;
    }
  }
示例#7
0
  /**
   * processControlEvent is the method that will be called when an event is received for a module
   * that has registered itself as a client of the External Control Interface
   *
   * @param Command - command that is understand by the client module
   * @param Init - we are performing initial configuration if true
   * @param Parameter - parameter for the command
   * @return The result string of the operation
   */
  @Override
  public String processControlEvent(String Command, boolean Init, String Parameter) {
    int ResultCode = -1;

    // Set the status of the invalidate duplicates
    if (Command.equalsIgnoreCase(SERVICE_INVALIDATE_DUPLICATE)) {
      if (Parameter.equalsIgnoreCase("true")) {
        // Set the value
        invalidateOnDuplicate = true;

        // done
        ResultCode = 0;
      } else if (Parameter.equalsIgnoreCase("false")) {
        // Set the value
        invalidateOnDuplicate = false;

        // done
        ResultCode = 0;
      } else if (Parameter.equals("")) {
        // return the current state
        if (invalidateOnDuplicate) {
          return "true";
        } else {
          return "false";
        }
      }
    }

    if (ResultCode == 0) {
      OpenRate.getOpenRateFrameworkLog()
          .debug(LogUtil.LogECICacheCommand(getSymbolicName(), Command, Parameter));

      return "OK";
    } else {
      return super.processControlEvent(Command, Init, Parameter);
    }
  }
示例#8
0
  /**
   * Add an alias to the customer cache. An alias is a representation of any identifier that can be
   * used to locate the account. Note that we exclude the last second of the validity period to
   * avoid issues with overlapping periods that end and start on the same second (e.g. old validity
   * ends on 1st Sept @ 00:00 and the new one starts on 1st Sept @ 00:00)
   *
   * @param alias The identifier that should be used to locate the account
   * @param custId The account that should be located
   * @param validFrom The start date of the validity
   * @param validTo The end date of the validity
   */
  public void addAlias(String alias, int custId, long validFrom, long validTo) {
    validityNode NewNode;
    validityNode tmpValidityNode;
    validityNode tmpValidityNextNode;
    boolean insertedEntry = false;

    // Check that the valid to is after the valid from
    if (validFrom > validTo) {
      // Otherwise write an error and ignore it
      OpenRate.getOpenRateFrameworkLog()
          .error(
              "Alias ID <"
                  + alias
                  + "> validity period from <"
                  + validFrom
                  + "> is after validity period to <"
                  + validTo
                  + ">. Ignoring.");

      return;
    }

    // Now add the validity segment into the ArrayList
    if (!aliasCache.containsKey(alias)) {
      // We do not know this alias - Create the new ArrayList
      tmpValidityNode = new validityNode();
      // tmpValidityNode.ID = ID;
      tmpValidityNode.TimeFrom = validFrom;
      tmpValidityNode.TimeTo = validTo - 1; // Exlude the last second
      tmpValidityNode.Result = custId;
      tmpValidityNode.child = null;
      // NewNode.SubId = subID;

      // Add in the new node
      aliasCache.put(alias, tmpValidityNode);

      // mark that we have done the work
      insertedEntry = true;
    } else {
      // Recover the validity map that there is
      tmpValidityNode = aliasCache.get(alias);

      // now run down the validity periods until we find the right position
      while (tmpValidityNode != null) {
        tmpValidityNextNode = tmpValidityNode.child;

        // Search for the place that will accommodate the start of the segment
        if (validFrom > tmpValidityNode.TimeTo) {
          if (tmpValidityNextNode == null) {
            // Insert at the end of the list
            NewNode = new validityNode();
            // tmpValidityNode.ID = ID;
            tmpValidityNode.child = NewNode;
            NewNode.TimeFrom = validFrom;
            NewNode.TimeTo = validTo - 1; // Exclude the last second
            NewNode.Result = custId;
            // NewNode.SubId = subID;

            // mark that we have done the work
            insertedEntry = true;
          } else {
            if (validTo < tmpValidityNextNode.TimeFrom) {
              // insert into the middle of the list
              NewNode = new validityNode();
              NewNode.child = tmpValidityNode.child;
              tmpValidityNode.child = NewNode;
              // tmpValidityNode.ID = ID;
              NewNode.TimeFrom = validFrom;
              NewNode.TimeTo = validTo;
              NewNode.Result = custId;
              // NewNode.SubId = subID;

              // mark that we have done the work
              insertedEntry = true;
            }
          }
        }

        // Move down the map
        tmpValidityNode = tmpValidityNode.child;
      }
    }

    // see if we inserted correctly
    if (!insertedEntry) {
      if (invalidateOnDuplicate) {
        // remove the whole key that we couldn't add.
        aliasCache.remove(alias);
        OpenRate.getOpenRateFrameworkLog()
            .error(
                "Alias ID <"
                    + alias
                    + "> already exists for time <"
                    + validFrom
                    + "-"
                    + validTo
                    + ">. Removed key.");
      } else {
        // Otherwise write an error and ignore it
        OpenRate.getOpenRateFrameworkLog()
            .error(
                "Alias ID <"
                    + alias
                    + "> already exists for time <"
                    + validFrom
                    + "-"
                    + validTo
                    + ">");
      }
    }
  }
示例#9
0
  /** Load the data from the defined Data Source DB */
  @Override
  public void loadDataFromDB() throws InitializationException {
    int custId;
    String orderId;
    String orderLineId;
    String alias;
    String description;
    String prodName;
    String service;
    String subscription;
    int custLoaded = 0;
    String tmpStartDate;
    String tmpEndDate;
    long startDate = 0;
    long endDate = 0;
    String tmpQuantity;
    int quantity;

    // Log that we are starting the loading
    OpenRate.getOpenRateFrameworkLog()
        .info("Starting Customer Cache Loading from DB for <" + getSymbolicName() + ">");

    // Try to open the DS
    JDBCcon = DBUtil.getConnection(cacheDataSourceName);

    // Now prepare the statements
    prepareStatements();

    // Execute the query
    try {
      mrs = StmtCustomerDataSelectQuery.executeQuery();
    } catch (SQLException ex) {
      message =
          "Error performing SQL for retieving Customer data. message <" + ex.getMessage() + ">";
      throw new InitializationException(message, ex, getSymbolicName());
    }

    // loop through the results for the customer alias cache
    try {
      mrs.beforeFirst();

      while (mrs.next()) {
        custLoaded++;
        orderId = mrs.getString(1);
        custId = mrs.getInt(2);
        orderLineId = mrs.getString(3);
        description = mrs.getString(4);
        tmpStartDate = mrs.getString(5);
        tmpEndDate = mrs.getString(6);
        tmpQuantity = mrs.getString(7);

        // parse the description
        prodName = getProduct(description);
        alias = getAlias(description);
        service = getService(description);
        subscription = getSubscription(description);

        if ((prodName == null) | (alias == null) | (service == null) | (subscription == null)) {
          OpenRate.getOpenRateFrameworkLog()
              .warning(
                  "Record <"
                      + description
                      + "> skipped for customer <"
                      + custId
                      + "> order <"
                      + orderId
                      + ">.");
          continue;
        }

        // parse the start date
        try {
          if (tmpStartDate == null) {
            startDate = CommonConfig.LOW_DATE;
          } else {
            startDate = conv.convertInputDateToUTC(tmpStartDate);
          }
        } catch (ParseException ex) {
          OpenRate.getOpenRateFrameworkLog()
              .error(
                  "Start Date format for record <"
                      + custLoaded
                      + "> are not correct. Date <"
                      + tmpStartDate
                      + ">, format <"
                      + conv.getInputDateFormat()
                      + "> order <"
                      + orderId
                      + ">. Data discarded.");
        }

        // parse the end date
        try {
          if (tmpEndDate == null) {
            endDate = CommonConfig.HIGH_DATE;
          } else {
            endDate = conv.convertInputDateToUTC(tmpEndDate);
          }
        } catch (ParseException ex) {
          OpenRate.getOpenRateFrameworkLog()
              .error(
                  "End Date format for record <"
                      + custLoaded
                      + "> are not correct. Date <"
                      + tmpEndDate
                      + ">, format <"
                      + conv.getInputDateFormat()
                      + "> order <"
                      + orderId
                      + ">. Data discarded.");
        }

        // parse the Quantity
        quantity = Integer.parseInt(tmpQuantity);

        // print the information to the log
        OpenRate.getOpenRateFrameworkLog()
            .info(
                "Adding service ID <"
                    + alias
                    + "> to account <"
                    + custId
                    + "> with product <"
                    + prodName
                    + "> validity <"
                    + tmpStartDate
                    + " ("
                    + startDate
                    + ") - "
                    + tmpEndDate
                    + " ("
                    + endDate
                    + ")>, Qty: <"
                    + quantity
                    + "> order <"
                    + orderId
                    + ">.");

        // Add the map
        addAlias(alias, custId, startDate, endDate);
        addCustId(custId, CommonConfig.LOW_DATE, CommonConfig.HIGH_DATE, 0);
        addCPI(
            custId,
            service,
            subscription,
            prodName,
            startDate,
            endDate,
            Integer.parseInt(orderId),
            Integer.parseInt(orderLineId),
            quantity);
      }
    } catch (SQLException ex) {
      message = "Error opening Customer Data for <" + cacheDataSourceName + ">";
      throw new InitializationException(message, ex, getSymbolicName());
    }

    // Close down stuff
    try {
      mrs.close();
      StmtCustomerDataSelectQuery.close();
      JDBCcon.close();
    } catch (SQLException ex) {
      message =
          "Error closing Result Set for Customer information from <" + cacheDataSourceName + ">";
      throw new InitializationException(message, ex, getSymbolicName());
    }

    OpenRate.getOpenRateFrameworkLog()
        .info("Customer Cache Data Loading completed from <" + cacheDataSourceName + ">");

    OpenRate.getOpenRateFrameworkLog().info("Products Loaded:  " + custLoaded);
  }
示例#10
0
  /**
   * Load the data from the defined Data Source
   *
   * @throws OpenRate.exception.InitializationException
   */
  @Override
  public void loadDataFromDB() throws InitializationException {
    int ColumnIdx;
    int ColumnCount;
    int ConfigsLoaded = 0;
    String Group;
    ResultSetMetaData Rsmd;
    String[] SearchMapFields;
    int ResultFormFactor = 0;
    ArrayList<String> tmpResultList;

    // Find the location of the  zone configuration file
    OpenRate.getOpenRateFrameworkLog()
        .info("Starting Regex Match Cache Loading from DB for <" + getSymbolicName() + ">");

    // Try to open the DS
    JDBCcon = DBUtil.getConnection(cacheDataSourceName);

    // Now prepare the statements
    prepareStatements();

    // Execute the query
    try {
      mrs = StmtCacheDataSelectQuery.executeQuery();
    } catch (SQLException ex) {
      message =
          "Error performing SQL for retrieving Regex Match data in module <"
              + getSymbolicName()
              + ">. message <"
              + ex.getMessage()
              + ">";
      OpenRate.getOpenRateFrameworkLog().fatal(message);
      throw new InitializationException(message, getSymbolicName());
    }

    // loop through the results for the customer login cache
    try {
      Rsmd = mrs.getMetaData();
      ColumnCount = Rsmd.getColumnCount();

      // Read the form factor from the first entry, and then make sure
      // that we always get this
      if (ResultFormFactor == 0) {
        // Check that this is a form factor we are able to use. There
        // must be at least 3 fields for us to be able to work with
        // the record:
        //  - Group identifier
        //  - Some fields to compare (min 1)
        //  - a result
        if (ColumnCount < 3) {
          // we're not going to be able to use this
          message =
              "You must define at least 3 entries in the record, you have defined  <"
                  + ColumnCount
                  + ">";
          OpenRate.getOpenRateFrameworkLog().fatal(message);
          throw new InitializationException(message, getSymbolicName());
        }

        // Do we have a defined form factor?
        if (KeyFormFactor == 0) {
          // If we have not been given a key form factor, assume the result factor is 1
          ResultFormFactor = 1;
          KeyFormFactor = ColumnCount - ResultFormFactor - 1;
          message =
              "Using default key factor for regex cache <"
                  + cacheDataSourceName
                  + ">. Assuming Key = <"
                  + Integer.toString(KeyFormFactor)
                  + "> and Result = <"
                  + Integer.toString(ResultFormFactor)
                  + ">";
          OpenRate.getOpenRateFrameworkLog().info(message);
        } else {
          // Use the given factor
          ResultFormFactor = ColumnCount - KeyFormFactor - 1;

          if (ResultFormFactor < 1) {
            // Makes no sense to start if we don't give any results
            message =
                "Error in module <"
                    + cacheDataSourceName
                    + ">. Key fields >= total columns. Got KeyFields <"
                    + KeyFormFactor
                    + "> and columns <"
                    + ColumnCount
                    + ">";
            OpenRate.getOpenRateFrameworkLog().fatal(message);
            throw new InitializationException(message, getSymbolicName());
          }

          message =
              "Using defined key factor for regex cache <"
                  + getSymbolicName()
                  + ">. Using Key = <"
                  + Integer.toString(KeyFormFactor)
                  + "> and Result = <"
                  + Integer.toString(ResultFormFactor)
                  + ">";
          OpenRate.getOpenRateFrameworkLog().info(message);
        }
      }

      // Start the loading
      mrs.beforeFirst();
      while (mrs.next()) {
        ConfigsLoaded++;
        Group = mrs.getString(1);

        SearchMapFields = new String[KeyFormFactor];

        // create the array to transfer the columns into the map
        for (ColumnIdx = 1; ColumnIdx < KeyFormFactor + 1; ColumnIdx++) {
          SearchMapFields[ColumnIdx - 1] = mrs.getString(ColumnIdx + 1);
        }

        tmpResultList = new ArrayList<>();
        for (ColumnIdx = KeyFormFactor + 1;
            ColumnIdx < (ResultFormFactor + KeyFormFactor + 1);
            ColumnIdx++) {
          tmpResultList.add(mrs.getString(ColumnIdx + 1));
        }

        // Add the map
        addEntry(Group.intern(), SearchMapFields, tmpResultList);

        // Update to the log file
        if ((ConfigsLoaded % loadingLogNotificationStep) == 0) {
          message =
              "Regex Map Data Loading: <"
                  + ConfigsLoaded
                  + "> configurations loaded for <"
                  + getSymbolicName()
                  + "> from <"
                  + cacheDataSourceName
                  + ">";
          OpenRate.getOpenRateFrameworkLog().info(message);
        }
      }
    } catch (SQLException ex) {
      message = "Error opening Search Map Data for <" + getSymbolicName() + ">";
      OpenRate.getOpenRateFrameworkLog().fatal(message);
      throw new InitializationException(message, ex, getSymbolicName());
    } catch (NullPointerException ex) {
      message =
          "Error opening Search Map Data for <"
              + getSymbolicName()
              + "> in config <"
              + ConfigsLoaded
              + ">";
      OpenRate.getOpenRateFrameworkLog().fatal(message);
      throw new InitializationException(message, ex, getSymbolicName());
    }

    // Close down stuff
    try {
      mrs.close();
      StmtCacheDataSelectQuery.close();
      JDBCcon.close();
    } catch (SQLException ex) {
      message = "Error closing Search Map Data connection for <" + cacheDataSourceName + ">";
      OpenRate.getOpenRateFrameworkLog().fatal(message);
      throw new InitializationException(message, getSymbolicName());
    }

    message =
        "Regex Map Data Loading completed. <"
            + ConfigsLoaded
            + "> configuration lines loaded for <"
            + getSymbolicName()
            + "> from <"
            + cacheDataSourceName
            + ">";
    OpenRate.getOpenRateFrameworkLog().info(message);
  }
示例#11
0
  /**
   * Load the data from the defined file
   *
   * @throws OpenRate.exception.InitializationException
   */
  @Override
  public void loadDataFromFile() throws InitializationException {
    // Variable declarations
    BufferedReader inFile;
    int MapsLoaded = 0;
    String[] MapEntryFields;
    String[] SearchMapFields;
    String tmpFileRecord;
    String Group;
    int ColumnCount;
    int ColumnIdx;
    int ResultFormFactor = 0;
    ArrayList<String> tmpResultList;

    // Find the location of the configuration file
    OpenRate.getOpenRateFrameworkLog()
        .info("Starting Regex Match Cache Loading from file for <" + getSymbolicName() + ">");

    // Try to open the file
    try {
      inFile = new BufferedReader(new FileReader(cacheDataFile));
    } catch (FileNotFoundException ex) {
      message = "Application is not able to read file : <" + cacheDataFile + ">";
      OpenRate.getOpenRateFrameworkLog().error(message);
      throw new InitializationException(message, ex, getSymbolicName());
    }

    // File open, now get the stuff
    try {
      while (inFile.ready()) {
        tmpFileRecord = inFile.readLine();

        if ((tmpFileRecord.startsWith("#")) | tmpFileRecord.trim().equals("")) {
          // comment do not load
        } else {
          MapsLoaded++;
          MapEntryFields = tmpFileRecord.split(";");

          ColumnCount = MapEntryFields.length;

          // Read the form factor from the first entry, and then make sure
          // that we always get this
          if (ResultFormFactor == 0) {
            // Check that this is a form factor we are able to use. There
            // must be at least 3 fields for us to be able to work with
            // the record:
            //  - Group identifier
            //  - Some fields to compare (min 1)
            //  - a result
            if (ColumnCount < 3) {
              // we're not going to be able to use this
              message =
                  "You must define at least 3 entries in the record, you have defined  <"
                      + ColumnCount
                      + "> in module <"
                      + getSymbolicName()
                      + ">";
              OpenRate.getOpenRateFrameworkLog().fatal(message);
              throw new InitializationException(message, getSymbolicName());
            }

            // Do we have a defined form factor?
            if (KeyFormFactor == 0) {
              // If we have not been given a key form factor, assume the result factor is 1
              ResultFormFactor = 1;
              KeyFormFactor = ColumnCount - ResultFormFactor - 1;
              message =
                  "Using default key factor for regex cache <"
                      + cacheDataFile
                      + ">. Assuming Key = <"
                      + Integer.toString(KeyFormFactor)
                      + "> and Result = <"
                      + Integer.toString(ResultFormFactor)
                      + "> in module <"
                      + getSymbolicName()
                      + ">";
              OpenRate.getOpenRateFrameworkLog().info(message);
            } else {
              // Use the given factor
              ResultFormFactor = ColumnCount - KeyFormFactor - 1;
              message =
                  "Using defined key factor for regex cache <"
                      + cacheDataFile
                      + ">. Using Key = <"
                      + Integer.toString(KeyFormFactor)
                      + "> and Result = <"
                      + Integer.toString(ResultFormFactor)
                      + "> in module <"
                      + getSymbolicName()
                      + ">";
              OpenRate.getOpenRateFrameworkLog().info(message);
            }
          }

          // Check that we are always getting the same form factor
          if (MapEntryFields.length == (KeyFormFactor + ResultFormFactor + 1)) {
            // Add the row, after extracting the group and the result
            Group = MapEntryFields[0];
            SearchMapFields = new String[KeyFormFactor];

            for (ColumnIdx = 0; ColumnIdx < KeyFormFactor; ColumnIdx++) {
              SearchMapFields[ColumnIdx] = MapEntryFields[ColumnIdx + 1];
            }

            tmpResultList = new ArrayList<>();
            for (ColumnIdx = KeyFormFactor;
                ColumnIdx < (ResultFormFactor + KeyFormFactor);
                ColumnIdx++) {
              tmpResultList.add(MapEntryFields[ColumnIdx + 1]);
            }

            // Add the map
            addEntry(Group.intern(), SearchMapFields, tmpResultList);
          } else {
            // Error because the form factor changed
            message =
                "Form Factor should be Key = <"
                    + Integer.toString(KeyFormFactor)
                    + "> + Payload = <"
                    + Integer.toString(ResultFormFactor)
                    + ">, but received <"
                    + MapEntryFields.length
                    + "> in module <"
                    + getSymbolicName()
                    + ">";
            OpenRate.getOpenRateFrameworkLog().error(message);
            throw new InitializationException(message, getSymbolicName());
          }

          // Update to the log file
          if ((MapsLoaded % loadingLogNotificationStep) == 0) {
            message =
                "Regex Map Data Loading: <"
                    + MapsLoaded
                    + "> configurations loaded for <"
                    + getSymbolicName()
                    + "> from <"
                    + cacheDataFile
                    + ">";
            OpenRate.getOpenRateFrameworkLog().info(message);
          }
        }
      }
    } catch (IOException ex) {
      message =
          "Error reading input file  <"
              + cacheDataFile
              + "> in record <"
              + MapsLoaded
              + ">. IO Error.";
      OpenRate.getOpenRateFrameworkLog().fatal(message);
    } catch (ArrayIndexOutOfBoundsException ex) {
      message =
          "Error reading input file  <"
              + cacheDataFile
              + "> in record <"
              + MapsLoaded
              + ">. Malformed Record.";
      OpenRate.getOpenRateFrameworkLog().fatal(message);
    } catch (NullPointerException npe) {
      message =
          "Error reading input file  <"
              + cacheDataFile
              + "> in record <"
              + MapsLoaded
              + ">. Malformed Record in module <"
              + getSymbolicName()
              + ">";
      OpenRate.getOpenRateFrameworkLog().fatal(message);
    } finally {
      try {
        inFile.close();
      } catch (IOException ex) {
        message =
            "Error closing input file <"
                + cacheDataFile
                + "> in module <"
                + getSymbolicName()
                + ">";
        OpenRate.getOpenRateFrameworkLog().error(message, ex);
      }
    }

    message =
        "Regex Map Data Loading completed. <"
            + MapsLoaded
            + "> configuration lines loaded for <"
            + getSymbolicName()
            + "> from <"
            + cacheDataFile
            + ">";
    OpenRate.getOpenRateFrameworkLog().info(message);
  }
示例#12
0
  /**
   * Evaluate an input against the search group. This is the generalised from which you may want to
   * create specialised versions for a defined number of parameters, for reasons of performance.
   *
   * <p>This function returns only the first match.
   *
   * @param Group The Regular expression group to search
   * @param Parameters The list of fields to search
   * @return Result The result of the search as a SearchMap object
   */
  private SearchMap getMatchingSearchResult(String Group, String[] Parameters) {
    int i;
    SearchGroup tmpSearchGroup;
    SearchMap tmpSearchMap;
    Pattern tmpPattern;
    boolean Found;
    double tmpParamValue;

    // recover the object
    tmpSearchGroup = GroupCache.get(Group);

    if (tmpSearchGroup == null) {
      // Return a default value
      return null;
    } else {
      // Iterate thorough the entries in the group
      Iterator<SearchMap> GroupIter = tmpSearchGroup.SearchGroup.listIterator();

      while (GroupIter.hasNext()) {
        tmpSearchMap = GroupIter.next();

        // Initialise the found flag and the counter
        Found = true;
        i = 0;

        // Now check the elements of the map
        while ((i < Parameters.length) & Found) {
          switch (tmpSearchMap.matchType[i]) {
              // Regex inclusion case
            case 0:
              {
                tmpPattern = tmpSearchMap.matchPattern[i];

                if (Parameters[i] == null) {
                  // we cannot match on null values - warn once and out...
                  OpenRate.getOpenRateFrameworkLog()
                      .warning(
                          "Null value found in regex match on parameter <"
                              + i
                              + "> in module <"
                              + getSymbolicName()
                              + ">");
                  return null;
                }

                if (!tmpPattern.matcher(Parameters[i]).matches()) {
                  // We did not get a match, move on
                  Found = false;
                }
                break;
              }

              // Regex exclusion case
            case 6:
              {
                tmpPattern = tmpSearchMap.matchPattern[i];

                if (tmpPattern.matcher(Parameters[i]).matches()) {
                  // We did not get a match, move on
                  Found = false;
                }
                break;
              }

              // "=" case
            case 1:
              {
                tmpParamValue = Double.parseDouble(Parameters[i]);
                if (tmpSearchMap.matchValue[i] != tmpParamValue) {
                  // We did not get a match, move on
                  Found = false;
                }
                break;
              }

              // ">" case
            case 2:
              {
                tmpParamValue = Double.parseDouble(Parameters[i]);
                if (tmpParamValue <= tmpSearchMap.matchValue[i]) {
                  // We did not get a match, move on
                  Found = false;
                }
                break;
              }

              // "<" case
            case 3:
              {
                tmpParamValue = Double.parseDouble(Parameters[i]);
                if (tmpParamValue >= tmpSearchMap.matchValue[i]) {
                  // We did not get a match, move on
                  Found = false;
                }
                break;
              }

              // ">=" case
            case 4:
              {
                tmpParamValue = Double.parseDouble(Parameters[i]);
                if (tmpParamValue < tmpSearchMap.matchValue[i]) {
                  // We did not get a match, move on
                  Found = false;
                }
                break;
              }

              // "<=" case
            case 5:
              {
                tmpParamValue = Double.parseDouble(Parameters[i]);
                if (tmpParamValue > tmpSearchMap.matchValue[i]) {
                  // We did not get a match, move on
                  Found = false;
                }
                break;
              }
          }

          // Increment the loop counter
          i++;
        }

        if (Found) {
          return tmpSearchMap;
        }
      }

      // Return a default value - we found nothing
      return null;
    }
  }
示例#13
0
  /**
   * Add a value into the Regex Map Cache, defining the result value that should be returned in the
   * case of a match. The order of evaluation of the items in the group is the order that they are
   * defined, but it would be a simple task to order them by some value after loading.
   *
   * @param Group The Regex group to add this pattern to
   * @param fields The list of fields to add to the group
   * @param ResultList The list of result fields to add
   * @throws OpenRate.exception.InitializationException
   */
  private void addEntry(String Group, String[] fields, ArrayList<String> ResultList)
      throws InitializationException {
    int i;
    SearchMap tmpSearchMap;
    SearchGroup tmpSearchGroup;
    String Helper;
    String FirstChar;
    String SecondChar;
    String valueToParse;
    String[] checkedFields;
    ArrayList<String> checkedResultList;

    // Allow the user to check the input fields
    checkedFields = validateSearchMap(fields);

    // Allow the user to check the return fields
    checkedResultList = validateResultList(ResultList);

    // See if we already know this group, if not add it
    if (GroupCache.containsKey(Group)) {
      // Get the existing value
      tmpSearchGroup = GroupCache.get(Group);
    } else {
      // We don't know it, so add it
      tmpSearchGroup = new SearchGroup();
      tmpSearchGroup.SearchGroup = new ArrayList<>();
      GroupCache.put(Group, tmpSearchGroup);
    }

    // Create the new search Object.
    tmpSearchMap = new SearchMap();

    // Compile and add the search map
    tmpSearchMap.matchPattern = new Pattern[checkedFields.length];
    tmpSearchMap.matchType = new int[checkedFields.length];
    tmpSearchMap.matchValue = new double[checkedFields.length];

    for (i = 0; i < fields.length; i++) {
      // get the short version of the string for understanding what it is
      Helper = fields[i].replaceAll(" ", "") + "  ";

      FirstChar = Helper.substring(0, 1);
      SecondChar = Helper.substring(1, 2);

      if ((FirstChar.equals("<")) | (FirstChar.equals(">")) | (FirstChar.equals("="))) {
        // try to parse for simple numerical comparison
        if (FirstChar.equals("=")) {
          tmpSearchMap.matchType[i] = 1;
          valueToParse = Helper.substring(1).trim();

          try {
            tmpSearchMap.matchValue[i] = Double.parseDouble(valueToParse);
          } catch (NumberFormatException ex) {
            throw new InitializationException(
                "Could not parse value <" + valueToParse + "> as a double value",
                getSymbolicName());
          }

          continue;
        }

        if (FirstChar.equals(">")) {
          if (SecondChar.equals("=")) {
            tmpSearchMap.matchType[i] = 4;
            valueToParse = Helper.substring(2).trim();
            try {
              tmpSearchMap.matchValue[i] = Double.parseDouble(valueToParse);
            } catch (NumberFormatException ex) {
              throw new InitializationException(
                  "Could not parse value <" + valueToParse + "> as a double value",
                  getSymbolicName());
            }

            continue;
          } else {
            // we got this far, must be just ">"
            tmpSearchMap.matchType[i] = 2;
            valueToParse = Helper.substring(1).trim();

            try {
              tmpSearchMap.matchValue[i] = Double.parseDouble(valueToParse);
            } catch (NumberFormatException ex) {
              throw new InitializationException(
                  "Could not parse value <" + valueToParse + "> as a double value",
                  getSymbolicName());
            }

            continue;
          }
        }

        if (FirstChar.equals("<")) {
          if (SecondChar.equals("=")) {
            tmpSearchMap.matchType[i] = 5;
            valueToParse = Helper.substring(2).trim();

            try {
              tmpSearchMap.matchValue[i] = Double.parseDouble(valueToParse);
            } catch (NumberFormatException ex) {
              throw new InitializationException(
                  "Could not parse value <" + valueToParse + "> as a double value",
                  getSymbolicName());
            }
          } else {
            // we got this far, must be just "<"
            tmpSearchMap.matchType[i] = 3;
            valueToParse = Helper.substring(1).trim();

            try {
              tmpSearchMap.matchValue[i] = Double.parseDouble(valueToParse);
            } catch (NumberFormatException ex) {
              throw new InitializationException(
                  "Could not parse value <" + valueToParse + "> as a double value",
                  getSymbolicName());
            }
          }
        }
      } else {
        if (FirstChar.equals("!")) {
          // This is a regex negation, remove the ! and set the flag and regex
          // for the rest
          tmpSearchMap.matchPattern[i] = Pattern.compile(fields[i].substring(1));
          tmpSearchMap.matchType[i] = 6;
        } else {
          // if we got this far it is Real Regex inclusion
          try {
            tmpSearchMap.matchPattern[i] = Pattern.compile(fields[i]);
          } catch (PatternSyntaxException pse) {
            message =
                "Error compiling regex pattern <"
                    + fields[i]
                    + "> in module <"
                    + getSymbolicName()
                    + ">. message <"
                    + pse.getMessage()
                    + ">";
            OpenRate.getOpenRateFrameworkLog().error(message);
            throw new InitializationException(message, getSymbolicName());
          }

          tmpSearchMap.matchType[i] = 0;
        }
      }
    }

    tmpSearchMap.Results = checkedResultList;
    tmpSearchGroup.SearchGroup.add(tmpSearchMap);
  }
示例#14
0
  /**
   * Load the data from the defined Data Source Method
   *
   * @throws OpenRate.exception.InitializationException
   */
  @Override
  public void loadDataFromMethod() throws InitializationException {
    int ColumnIdx;
    int ColumnCount;
    int ConfigsLoaded = 0;
    String Group;
    String[] SearchMapFields;
    int ResultFormFactor = 0;
    ArrayList<String> tmpMethodResult;
    ArrayList<String> tmpResultList;

    // Find the location of the  zone configuration file
    OpenRate.getOpenRateFrameworkLog()
        .info("Starting Regex Match Cache Loading from Method for <" + getSymbolicName() + ">");

    // Execute the user domain method
    Collection<ArrayList<String>> methodLoadResultSet;

    methodLoadResultSet = getMethodData(getSymbolicName(), CacheMethodName);

    if (methodLoadResultSet == null) {
      OpenRate.getOpenRateFrameworkLog()
          .warning(
              "No cache data returned by method <"
                  + CacheMethodName
                  + "> in cache <"
                  + getSymbolicName()
                  + ">");
    } else {
      Iterator<ArrayList<String>> methodDataToLoadIterator = methodLoadResultSet.iterator();

      while (methodDataToLoadIterator.hasNext()) {
        tmpMethodResult = methodDataToLoadIterator.next();

        ConfigsLoaded++;
        ColumnCount = tmpMethodResult.size();

        // Read the form factor from the first entry, and then make sure
        // that we always get this
        if (ResultFormFactor == 0) {
          // Check that this is a form factor we are able to use. There
          // must be at least 3 fields for us to be able to work with
          // the record:
          //  - Group identifier
          //  - Some fields to compare (min 1)
          //  - a result
          if (ColumnCount < 3) {
            // we're not going to be able to use this
            message =
                "You must define at least 3 entries in the record, you have defined  <"
                    + ColumnCount
                    + ">";
            OpenRate.getOpenRateFrameworkLog().fatal(message);
            throw new InitializationException(message, getSymbolicName());
          }

          // Do we have a defined form factor?
          if (KeyFormFactor == 0) {
            // If we have not been given a key form factor, assume the result factor is 1
            ResultFormFactor = 1;
            KeyFormFactor = ColumnCount - ResultFormFactor - 1;
            message =
                "Using default key factor for regex cache <"
                    + cacheDataSourceName
                    + ">. Assuming Key = <"
                    + Integer.toString(KeyFormFactor)
                    + "> and Result = <"
                    + Integer.toString(ResultFormFactor)
                    + ">";
            OpenRate.getOpenRateFrameworkLog().info(message);
          } else {
            // Use the given factor
            ResultFormFactor = ColumnCount - KeyFormFactor - 1;
            message =
                "Using defined key factor for regex cache <"
                    + cacheDataSourceName
                    + ">. Using Key = <"
                    + Integer.toString(KeyFormFactor)
                    + "> and Result = <"
                    + Integer.toString(ResultFormFactor)
                    + ">";
            OpenRate.getOpenRateFrameworkLog().info(message);
          }
        }

        // Check that we are always getting the same form factor
        if (ColumnCount == (KeyFormFactor + ResultFormFactor + 1)) {
          // Add the row, after extracting the group and the result
          Group = tmpMethodResult.get(0);

          // Get the search map fields
          SearchMapFields = new String[KeyFormFactor];
          for (ColumnIdx = 0; ColumnIdx < KeyFormFactor; ColumnIdx++) {
            SearchMapFields[ColumnIdx] = tmpMethodResult.get(ColumnIdx + 1);
          }

          tmpResultList = new ArrayList<>();
          for (ColumnIdx = KeyFormFactor;
              ColumnIdx < (ResultFormFactor + KeyFormFactor);
              ColumnIdx++) {
            tmpResultList.add(tmpMethodResult.get(ColumnIdx + 1));
          }

          // Add the map
          addEntry(Group.intern(), SearchMapFields, tmpResultList);

          // Update to the log file
          if ((ConfigsLoaded % loadingLogNotificationStep) == 0) {
            message =
                "Regex Map Data Loading: <"
                    + ConfigsLoaded
                    + "> configurations loaded for <"
                    + getSymbolicName()
                    + "> from <"
                    + cacheDataSourceName
                    + ">";
            OpenRate.getOpenRateFrameworkLog().info(message);
          }
        } else {
          // Error because the form factor changed
          message =
              "Form Factor should be Key = <"
                  + Integer.toString(KeyFormFactor)
                  + "> + Payload = <"
                  + Integer.toString(ResultFormFactor)
                  + ">, but received <"
                  + tmpMethodResult.size()
                  + ">";
          OpenRate.getOpenRateFrameworkLog().error(message);
          throw new InitializationException(message, getSymbolicName());
        }
      }
    }

    message =
        "Regex Map Data Loading completed. "
            + ConfigsLoaded
            + " configuration lines loaded for <"
            + getSymbolicName()
            + ">";
    OpenRate.getOpenRateFrameworkLog().info(message);
  }