private void shutDown() throws InterruptedException {
chipSelect.setValue(false);
chipSelect.close();
try {
// move this stuff into a function
configRegister.powerDown();
SPIFactory.INSTANCE.writeRead(new byte[] {(byte) NRFCommand.FlushTx.getCommand()});
statusRegister.clearMaxRTFlag();
activateCommand();
System.out.println(
"Status of Config register " + String.format("%02X ", configRegister.readFromRegister()));
System.out.println(
"Status of Enable Data pipe register "
+ String.format("%02X ", dataPipeRegister.readFromRegister()));
System.out.println(
"Status of Retry register " + String.format("%02X ", retryRegister.readFromRegister()));
System.out.println(
"Status of Rx dataload width pipe0 register "
+ String.format("%02X ", rxdataloadinPipe0.readFromRegister()));
System.out.println(
"Status of Feature register "
+ String.format("%02X ", featureRegister.readFromRegister()));
System.out.println(
"Status of Address PIPE0 register "
+ String.format("%02X ", addressPipe0.readFromRegister()));
} catch (SpiDeviceException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
// Actual Listener
@Override
public void run() {
// start two threads one for button event processing and another for axis data processing
// pass the RemoteSensorData object to it
// write default payload to device
try {
// move these two lines in to a function
writePayLoad(rfKeepAlive);
chipSelect.setValue(true);
System.out.println(
"Status of Config register " + String.format("%02X ", configRegister.readFromRegister()));
// tm is a threadMonitor from the calling application to shutdown the threads when UI exits.
while (!tm.getStopStatus()) {
int status = statusRegister.readFromRegister();
// System.out.println("Status reg value: "+String.format("%02X ",status));
// check whether RF link is up or down i.e whether the remote responds
if (hasMaxRetransmitReached(status)) {
// System.out.println("MaxRT Flag raised");
// reset this bit
statusRegister.clearMaxRTFlag();
if (linkEstablished && (exceptionCounter > 4)) {
System.out.println("Link dropped -2");
// previously link established
chipSelect.setValue(false);
SPIFactory.INSTANCE.writeRead(new byte[] {(byte) NRFCommand.FlushTx.getCommand()});
writePayLoad(rfKeepAlive);
chipSelect.setValue(true);
exceptionCounter = 0;
}
if (linkEstablished) {
exceptionCounter++;
}
} else if (hasAcknowledgementArrived(status)) {
if (startThreads) {
// start the threads to handle data received
buttonProcessorThread.start();
if (tiltProcessorThread != null) tiltProcessorThread.start();
startThreads = false;
}
// reset NOACK counter here
linkEstablished = true;
exceptionCounter = 0;
statusRegister.clearMaxRTFlag();
// data has arrived
// we know the data is 10 bytes long.
// Data is read from NRF register
// 10 bytes long -this array is of size 10
remoteDataPackets = readDataFromFIFO(NUM_DATA_PACKETS);
statusRegister.clearMaxRTFlag();
if (buttonQueue.size() == BUFFER_SIZE) {
buttonQueue.remove();
}
// last byte in response message is the button data
// add it to a Queue - Button processor thread will create an event if a button
// has been pressed or released
buttonQueue.add(new Byte(remoteDataPackets[NUM_DATA_PACKETS]));
if (tiltProcessorThread != null) {
if (accQueue.size() == BUFFER_SIZE) {
accQueue.remove();
}
// Accelerator data arrives in 1,2,3 positions
// they are added to a different queue so another thread creates an event
if (remoteDataPackets[1] != 0)
// accQueue.add(new Byte[]{(byte) (remoteDataPackets[1]+(byte)(0x80)),(byte)(
// remoteDataPackets[2]-(byte)0x78) , (byte)(remoteDataPackets[3]+0x72)});
accQueue.add(
new Byte[] {
(byte) remoteDataPackets[1],
(byte) remoteDataPackets[2],
(byte) remoteDataPackets[3],
(byte) remoteDataPackets[4],
(byte) remoteDataPackets[5],
(byte) remoteDataPackets[6]
});
}
int reuse = fifoRegister.readFromRegister();
// System.out.println("FIFO reg value: "+String.format("%02X ",(byte)reuse));
// check whether there is a new transmit data is available to send or
// or should we send default keep alive packet
if (!(((byte) reuse & 0x40) == 0x40)) {
// System.out.println("Calling write payload");
if (txDataQueue.isEmpty()) writePayLoad(rfKeepAlive);
else {
Byte[] dataFromuser = txDataQueue.poll();
byte[] sendData = new byte[dataFromuser.length];
for (int i = 0; i < sendData.length; i++) {
sendData[i] = dataFromuser[i].byteValue();
}
writePayLoad(sendData);
}
}
} else {
// keep a counter here if it reaches 4 - then power down chip - reinitialise
// System.out.println("Neither Ack received nor Max rt occured Status reg value:
// "+String.format("%02X ",status));
if (linkEstablished && (exceptionCounter > 4)) {
buttonQueue.clear();
accQueue.clear();
System.out.println("Link dropped");
// previously link established
chipSelect.setValue(false);
SPIFactory.INSTANCE.writeRead(new byte[] {(byte) NRFCommand.FlushTx.getCommand()});
writePayLoad(rfKeepAlive);
chipSelect.setValue(true);
exceptionCounter = 0;
}
if (linkEstablished) {
exceptionCounter++;
}
}
try {
Thread.sleep(10);
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
} catch (SpiDeviceException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} finally {
System.out.println("Shutdown command received....");
try {
shutDown();
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
SPIFactory.INSTANCE.disconnectSPI();
System.out.println("Device Controller thread exiting....");
}
}
