Пример #1
0
 private void performInterrupt(int interruptAddress) {
   int returnAddress = mCon.getProgramCounter() + 1;
   mCon.pushAddress(returnAddress);
   mCon.setStatusRegisterBit(ProgramContext.BREAK, true);
   mCon.push(mCon.getStatusRegister());
   mCon.setStatusRegisterBit(ProgramContext.IRQ_DISABLED_FLAG, true);
   mCon.jumpAbsolute(interruptAddress);
 }
Пример #2
0
  public boolean performNextInstruction() {
    int opCode = mCon.consumeOpCode();
    int address1;
    int address2;
    byte value;
    switch (opCode) {
      case 0x00: // BRK
        performBRK();
        break;
        ///////////////////////////////////////////////////////////////////////////////////////////
        // STATUS REGISTER
      case 0x78: // SEI Set interrupt disable status 1 -> I
        mCon.setStatusRegisterBit(ProgramContext.IRQ_DISABLED_FLAG, true);
        break;
      case 0x58: // CLI Clear interrupt disable bit 0 -> I
        mCon.setStatusRegisterBit(ProgramContext.IRQ_DISABLED_FLAG, false);
        break;
      case 0x38: // SEC   Set Carry Flag 1 -> C
        mCon.setStatusRegisterBit(ProgramContext.CARRY_FLAG, true);
        break;
      case 0x18: // CLC Clear Carry Flag 0 -> C
        mCon.setStatusRegisterBit(ProgramContext.CARRY_FLAG, false);
        break;
      case 0xF8: // SED Set Decimal Mode 1 -> D
        mCon.setStatusRegisterBit(ProgramContext.DECIMAL_MODE, true);
        break;
      case 0xD8: // CLD Clear Decimal Mode 0 -> D
        mCon.setStatusRegisterBit(ProgramContext.DECIMAL_MODE, false);
        break;
      case 0xB8: //	CLV Clear Overflow Flag 0 -> V
        mCon.setStatusRegisterBit(ProgramContext.OVERFLOW_FLAG, false);
        break;

        ///////////////////////////////////////////////////////////////////////////////////////////
        // LDk Load register with value/memory
      case 0xA9: // LDA Immediate
        mCon.setAcc(mCon.consumeByte());
        break;
      case 0xA2: // LDX Immediate
        mCon.setX(mCon.consumeByte());
        break;
      case 0xA0: // LDY Immediate
        mCon.setY(mCon.consumeByte());
        break;
      case 0xA5: // LDA Zero page
        mCon.setAcc(getByteInMemByZeroPageOperand());
        break;
      case 0xA6: // LDX Zero page
        mCon.setX(getByteInMemByZeroPageOperand());
        break;
      case 0xA4: // LDY Zero page
        mCon.setY(getByteInMemByZeroPageOperand());
        break;
      case 0xAD: // LDA Absolute
        mCon.setAcc(getByteInMemByAbsOperand());
        break;
      case 0xAE: // LDX Absolute
        mCon.setX(getByteInMemByAbsOperand());
        break;
      case 0xAC: // LDY Absolute
        mCon.setY(getByteInMemByAbsOperand());
        break;
      case 0xB5: // LDA Zero page + X
        mCon.setAcc(getByteInMemByZeroPageIndexedOperand(mCon.getX()));
        break;
      case 0xB6: // LDX Zero page + Y
        mCon.setX(getByteInMemByZeroPageIndexedOperand(mCon.getY()));
        break;
      case 0xB4: // LDY Zero page + X
        mCon.setY(getByteInMemByZeroPageIndexedOperand(mCon.getX()));
        break;
      case 0xBD: // LDA Absolute + X
        mCon.setAcc(getByteInMemByAbsIndexedOperand(mCon.getX()));
        break;
      case 0xB9: // LDA Absolute + Y
        mCon.setAcc(getByteInMemByAbsIndexedOperand(mCon.getY()));
        break;
      case 0xBE: // LDX Absolute + Y
        mCon.setX(getByteInMemByAbsIndexedOperand(mCon.getY()));
        break;
      case 0xBC: // LDY Absolute + X
        mCon.setY(getByteInMemByAbsIndexedOperand(mCon.getX()));
        break;
      case 0xA1: // LDA (Indirect, X)
        // throw new NotImplementedException();

        address1 = (mCon.consumeZeroPageAddress() + (mCon.getX() & 0xff)) & 0xff;
        address2 = mCon.getWordInMemory(address1) & 0xffff;
        value = mCon.getByteInMemory(address2);
        mCon.setAcc(value);
        break;
      case 0xB1: // LDA (Indirect), Y
        // throw new NotImplementedException();

        address1 = mCon.consumeZeroPageAddress();
        address2 = mCon.readAbsAddressInMem(address1) + (mCon.getY() & 0xff);
        value = mCon.getByteInMemory(address2);
        mCon.setAcc(value);
        break;

        ///////////////////////////////////////////////////////////////////////////////////////////
        // STk Store register in memory
      case 0x85: // STA Zero page
        setByteInMemByZeroPageOperand(mCon.getAcc());
        break;
      case 0x86: // STX Zero page
        setByteInMemByZeroPageOperand(mCon.getX());
        break;
      case 0x84: // STY Zero page
        setByteInMemByZeroPageOperand(mCon.getY());
        break;
      case 0x8D: // STA Absolute
        setByteInMemByAbsOperand(mCon.getAcc());
        break;
      case 0x8E: // STX Absolute
        setByteInMemByAbsOperand(mCon.getX());
        break;
      case 0x8C: // STY Absolute
        setByteInMemByAbsOperand(mCon.getY());
        break;
      case 0x95: // STA Zero page + X
        setByteInMemByZeroPageIndexedOperand(mCon.getX(), mCon.getAcc());
        break;
      case 0x96: // STX Zero page + Y
        setByteInMemByZeroPageIndexedOperand(mCon.getY(), mCon.getX());
        break;
      case 0x94: // STY Zero page + X
        setByteInMemByZeroPageIndexedOperand(mCon.getX(), mCon.getY());
        break;
      case 0x9D: // STA Absolute + X
        setByteInMemByAbsIndexedOperand(mCon.getX(), mCon.getAcc());
        break;
      case 0x99: // STA Absolute + Y
        setByteInMemByAbsIndexedOperand(mCon.getY(), mCon.getAcc());
        break;
      case 0x81: // STA (Indirect, X)
        // TODO: implement
        break;
      case 0x91: // STA (Indirect), Y
        // TODO: implement
        break;

        ///////////////////////////////////////////////////////////////////////////////////////////
        // Transfers between registers/pointers
      case 0xAA: // TAX Transfer accumulator to index X
        mCon.setX(mCon.getAcc());
        break;
      case 0xA8: // TAY Transfer accumulator to index Y
        mCon.setY(mCon.getAcc());
        break;
      case 0xBA: // TSX Transfer stack pointer to index X
        mCon.setX((byte) (mCon.getSP() & 0xff));
        break;
      case 0x8A: // TXA Transfer index X to accumulator
        mCon.setAcc(mCon.getX());
        break;
      case 0x9A: // TXS Transfer index X to stack pointer
        mCon.setSP(mCon.getX());
        break;
      case 0x98: // TYA Transfer index Y to accumulator
        mCon.setAcc(mCon.getY());
        break;

        ///////////////////////////////////////////////////////////////////////////////////////////
        // Increment memory by one
      case 0xE6: // INC Zero page
        mCon.incMemoryByte(mCon.consumeZeroPageAddress());
        break;
      case 0xF6: // INC Zero page + X
        mCon.incMemoryByte(mCon.consumeZeroPageAddress() + (mCon.getX() & 0xff));
        break;
      case 0xEE: // INC Absolute
        mCon.incMemoryByte(mCon.consumeAbsAddress());
        break;
      case 0xFE: // INC Absolute + X
        mCon.incMemoryByte(mCon.consumeAbsAddress() + (mCon.getX() & 0xff));
        break;

        ///////////////////////////////////////////////////////////////////////////////////////////
        // Decrement memory by one
      case 0xC6: // DEC Zero page
        mCon.decMemoryByte(mCon.consumeZeroPageAddress());
        break;
      case 0xD6: // DEC Zero page + X
        mCon.decMemoryByte(mCon.consumeZeroPageAddress() + (mCon.getX() & 0xff));
        break;
      case 0xCE: // DEC Absolute
        mCon.decMemoryByte(mCon.consumeAbsAddress());
        break;
      case 0xDE: // DEC Absolute + X
        mCon.decMemoryByte(mCon.consumeAbsAddress() + (mCon.getX() & 0xff));
        break;

        ///////////////////////////////////////////////////////////////////////////////////////////
        // Increment / decrement registers
      case 0xE8: // INX Increment Index X by one
        mCon.setX(OctoMath.incByte(mCon.getX()));
        break;
      case 0xC8: // INY Increment Index Y by one
        mCon.setY(OctoMath.incByte(mCon.getY()));
        break;
      case 0xCA: // DEX Decrement Index X by one
        mCon.setX(OctoMath.decByte(mCon.getX()));
        break;
      case 0x88: // DEY Decrement Index Y by one
        mCon.setY(OctoMath.decByte(mCon.getY()));
        break;

        ///////////////////////////////////////////////////////////////////////////////////////////
        // BIT Test bits in memory with accumulator
      case 0x24: // Zero page
      case 0x2C: // Absolute
        value = opCode == 0x24 ? getByteInMemByZeroPageOperand() : getByteInMemByAbsOperand();
        mCon.setStatusRegisterBit(ProgramContext.OVERFLOW_FLAG, (0x40 & value) != 0);
        mCon.setSignFlag(value);
        mCon.setZeroFlag((byte) (value & mCon.getAcc()));
        break;

        ///////////////////////////////////////////////////////////////////////////////////////////
        // Branching
      case 0x10: // BPL result >= 0
        address1 = mCon.consumeRelativeAddress();
        if (!mCon.getStatusBit(ProgramContext.SIGN_FLAG)) mCon.jumpRelative(address1);
        break;
      case 0x30: // BMI result < 0
        address1 = mCon.consumeRelativeAddress();
        if (mCon.getStatusBit(ProgramContext.SIGN_FLAG)) mCon.jumpRelative(address1);
        break;
      case 0x50: // BVC no overflow
        address1 = mCon.consumeRelativeAddress();
        if (!mCon.getStatusBit(ProgramContext.OVERFLOW_FLAG)) mCon.jumpRelative(address1);
        break;
      case 0x70: // BVC overflow
        address1 = mCon.consumeRelativeAddress();
        if (mCon.getStatusBit(ProgramContext.OVERFLOW_FLAG)) mCon.jumpRelative(address1);
        break;
      case 0x90: // BCC no carry
        address1 = mCon.consumeRelativeAddress();
        if (!mCon.getStatusBit(ProgramContext.CARRY_FLAG)) mCon.jumpRelative(address1);
        break;
      case 0xB0: // BCC carry
        address1 = mCon.consumeRelativeAddress();
        if (mCon.getStatusBit(ProgramContext.CARRY_FLAG)) mCon.jumpRelative(address1);
        break;
      case 0xD0: // BNE not zero
        address1 = mCon.consumeRelativeAddress();
        if (!mCon.getStatusBit(ProgramContext.ZERO_FLAG)) mCon.jumpRelative(address1);
        break;
      case 0xF0: // BEQ zero
        address1 = mCon.consumeRelativeAddress();
        if (mCon.getStatusBit(ProgramContext.ZERO_FLAG)) mCon.jumpRelative(address1);
        break;
      case 0x4C: // JMP Absolute
        mCon.jumpAbsolute(mCon.consumeAbsAddress());
        break;
      case 0x6C: // JMP Indirect
        address1 = mCon.consumeAbsAddress();
        address2 = mCon.getWordInMemory(address1) & 0xffff;
        mCon.jumpAbsolute(address2);
        break;
      case 0x20: // JSR Jump to new location saving return address
        mCon.pushAddress(mCon.getProgramCounter() + 2);
        mCon.jumpAbsolute(mCon.consumeAbsAddress());
        break;

        ///////////////////////////////////////////////////////////////////////////////////////////
        // CMP Compare memory and accumulator
      case 0xC9: // Immediate
        compareBytes(mCon.consumeByte(), mCon.getAcc());
        break;

      case 0xDD: // Absolute + X
        compareBytes(getByteInMemByAbsIndexedOperand(mCon.getX()), mCon.getAcc());
        break;

        ///////////////////////////////////////////////////////////////////////////////////////////
        // ORA "OR" memory with accumulator
      case 0x09: // Immediate
        mCon.setAcc(logicOr(mCon.consumeByte(), mCon.getAcc()));
        break;
        //			case 0x05: // ZP
        //				break;
        //			case 0x15: // ZP + X
        //				break;
        //			case 0x0D: // Abs
        //				break;
        //			case 0x1D: // Abs + X
        //				break;
        //			case 0x19: // Abs + Y
        //				break;
        //			case 0x01: // Indirect (,X)
        //				break;
        //			case 0x11: // Indirect (,) Y
        //				break;

        // Future expansions
      case 0x02:
      case 0x03:
      case 0x04:
      case 0x07:
      case 0x0B:
      case 0x0C:
      case 0x0F:
      case 0x12:
      case 0x13:
      case 0x14:
      case 0x1A:
      case 0x1B:
      case 0x1C:
      case 0x1F:
      case 0x43:
      case 0x4F:
      case 0x80:
      case 0xFA:
      case 0xFB:
        Logger.debug("Future expansion opcode '0x" + Integer.toHexString(opCode) + "'");
        return true;
      default:
        Logger.debug("Unknown operation code '0x" + Integer.toHexString(opCode) + "'");
        return false;
    }
    return true;
  }