Пример #1
1
 void start() {
   if (t == null) {
     t = new Thread(this, "UDP.OutgoingPacketHandler thread");
     t.setDaemon(true);
     t.start();
   }
 }
Пример #2
0
  /** Stops unicast and multicast receiver threads */
  void stopThreads() {
    Thread tmp;

    // 1. Stop the multicast receiver thread
    if (mcast_receiver != null) {
      if (mcast_receiver.isAlive()) {
        tmp = mcast_receiver;
        mcast_receiver = null;
        closeMulticastSocket(); // will cause the multicast thread to terminate
        tmp.interrupt();
        try {
          tmp.join(100);
        } catch (Exception e) {
        }
        tmp = null;
      }
      mcast_receiver = null;
    }

    // 2. Stop the unicast receiver thread
    if (ucast_receiver != null) {
      ucast_receiver.stop();
      ucast_receiver = null;
    }

    // 3. Stop the in_packet_handler thread
    if (incoming_packet_handler != null) {
      incoming_packet_handler.stop();
    }
  }
Пример #3
0
    protected void await(boolean throwInterrupt) throws InterruptedException {
      if (!signaled.get()) {
        lock.acquired = false;
        sendAwaitConditionRequest(lock.name, lock.owner);
        boolean interrupted = false;
        while (!signaled.get()) {
          parker.set(Thread.currentThread());
          LockSupport.park(this);

          if (Thread.interrupted()) {
            // If we were interrupted and haven't received a response yet then we try to
            // clean up the lock request and throw the exception
            if (!signaled.get()) {
              sendDeleteAwaitConditionRequest(lock.name, lock.owner);
              throw new InterruptedException();
            }
            // In the case that we were signaled and interrupted
            // we want to return the signal but still interrupt
            // our thread
            interrupted = true;
          }
        }
        if (interrupted) Thread.currentThread().interrupt();
      }

      // We set as if this signal was no released.  This way if the
      // condition is reused again, but the client condition isn't lost
      // we won't think we were signaled immediately
      signaled.set(false);
    }
Пример #4
0
    /**
     * @param views Guaranteed to be non-null and to have >= 2 members, or else this thread would
     *     not be started
     */
    public synchronized void start(Map<Address, View> views) {
      if (thread == null || thread.isAlive()) {
        this.coords.clear();

        // now remove all members which don't have us in their view, so RPCs won't block (e.g.
        // FLUSH)
        // https://jira.jboss.org/browse/JGRP-1061
        sanitizeViews(views);

        // Add all different coordinators of the views into the hashmap and sets their members:
        Collection<Address> coordinators = Util.determineMergeCoords(views);
        for (Address coord : coordinators) {
          View view = views.get(coord);
          if (view != null) this.coords.put(coord, new ArrayList<Address>(view.getMembers()));
        }

        // For the merge participants which are not coordinator, we simply add them, and the
        // associated
        // membership list consists only of themselves
        Collection<Address> merge_participants = Util.determineMergeParticipants(views);
        merge_participants.removeAll(coordinators);
        for (Address merge_participant : merge_participants) {
          Collection<Address> tmp = new ArrayList<Address>();
          tmp.add(merge_participant);
          coords.putIfAbsent(merge_participant, tmp);
        }

        thread = gms.getThreadFactory().newThread(this, "MergeTask");
        thread.setDaemon(true);
        thread.start();
      }
    }
Пример #5
0
 private void startEventHandlerThread() {
   if (event_queue == null) event_queue = new Queue();
   if (evt_thread == null) {
     evt_thread = new Thread(this, "GMS.EventHandlerThread");
     evt_thread.setDaemon(true);
     evt_thread.start();
   }
 }
Пример #6
0
 public void start() {
   if (thread == null) {
     thread = new Thread(this, "UDP.UcastReceiverThread");
     thread.setDaemon(true);
     running = true;
     thread.start();
   }
 }
Пример #7
0
 synchronized void start() {
   if (queue.closed()) queue.reset();
   if (thread == null || !thread.isAlive()) {
     thread = getThreadFactory().newThread(this, "ViewHandler");
     thread.setDaemon(
         false); // thread cannot terminate if we have tasks left, e.g. when we as coord leave
     thread.start();
   }
 }
Пример #8
0
 synchronized void waitUntilCompleted(long timeout, boolean resume) {
   if (thread != null) {
     try {
       thread.join(timeout);
     } catch (InterruptedException e) {
       Thread.currentThread().interrupt(); // set interrupt flag again
     }
     thread = null; // Added after Brian noticed that ViewHandler leaks class loaders
   }
   if (resume) resumeForce();
 }
Пример #9
0
 protected void handleInterruptRequest(Address source, long requestId) {
   Owner owner = new Owner(source, requestId);
   Runnable runnable = removeKeyForValue(_running, owner);
   Thread thread = null;
   if (runnable != null) {
     thread = _runnableThreads.remove(runnable);
   }
   if (thread != null) {
     thread.interrupt();
   } else if (log.isTraceEnabled())
     log.trace("Message could not be interrupted due to it already returned");
 }
Пример #10
0
 public void stop() {
   Thread tmp;
   if (thread != null && thread.isAlive()) {
     running = false;
     tmp = thread;
     thread = null;
     closeSocket(); // this will cause the thread to break out of its loop
     tmp.interrupt();
     tmp = null;
   }
   thread = null;
 }
Пример #11
0
  protected void stopFlusher() {
    flushing = false;
    Thread tmp = flusher;

    while (tmp != null && tmp.isAlive()) {
      tmp.interrupt();
      ack_promise.setResult(null);
      try {
        tmp.join();
      } catch (InterruptedException e) {
      }
    }
  }
Пример #12
0
    public void receive(Message msg) {
      if (!msg.isFlagSet(Message.OOB)) {
        try {
          System.out.println(Thread.currentThread() + ": waiting on latch");
          latch.await(25000, TimeUnit.MILLISECONDS);
          System.out.println(Thread.currentThread() + ": DONE waiting on latch");
        } catch (InterruptedException e) {
          e.printStackTrace();
        }
      }

      msgs.add((Integer) msg.getObject());
    }
Пример #13
0
  /**
   * Tests concurrent reception of multiple messages with a different conn_id
   * (https://issues.jboss.org/browse/JGRP-1347)
   */
  public void testMultipleConcurrentResets() throws Exception {
    sendAndCheck(a, b_addr, 1, r2);

    // now close connection on A unilaterally
    System.out.println("==== Closing the connection on A");
    removeConnection(u1, b_addr);

    r2.clear();

    final UNICAST unicast = (UNICAST) b.getProtocolStack().findProtocol(UNICAST.class);

    int NUM = 10;

    final List<Message> msgs = new ArrayList<Message>(NUM);

    for (int i = 1; i <= NUM; i++) {
      Message msg = new Message(b_addr, a_addr, "m" + i);
      UNICAST.UnicastHeader hdr = UNICAST.UnicastHeader.createDataHeader(1, (short) 2, true);
      msg.putHeader(unicast.getId(), hdr);
      msgs.add(msg);
    }

    Thread[] threads = new Thread[NUM];
    final CyclicBarrier barrier = new CyclicBarrier(NUM + 1);
    for (int i = 0; i < NUM; i++) {
      final int index = i;
      threads[i] =
          new Thread() {
            public void run() {
              try {
                barrier.await();
                unicast.up(new Event(Event.MSG, msgs.get(index)));
              } catch (Exception e) {
                e.printStackTrace();
              }
            }
          };
      threads[i].start();
    }

    barrier.await();
    for (Thread thread : threads) thread.join();

    List<Message> list = r2.getMessages();
    System.out.println("list = " + print(list));

    assert list.size() == 1
        : "list must have 1 element but has " + list.size() + ": " + print(list);
  }
Пример #14
0
 protected synchronized void acquire(boolean throwInterrupt) throws InterruptedException {
   if (!acquired) {
     owner = getOwner();
     sendGrantLockRequest(name, owner, 0, false);
     boolean interrupted = false;
     while (!acquired) {
       try {
         this.wait();
       } catch (InterruptedException e) {
         // If we haven't acquired the lock yet and were interrupted, then we have to clean up
         // the lock
         // request and throw the exception
         if (throwInterrupt && !acquired) {
           _unlock(true);
           throw e;
         }
         // If we did get the lock then we will return with the lock and interrupt status.
         // If we don't throw exceptions then we just set the interrupt flag and let it loop
         // around
         interrupted = true;
       }
     }
     if (interrupted) Thread.currentThread().interrupt();
   }
 }
Пример #15
0
  protected void flush(final Address new_coord) throws InterruptedException {
    // wait until all threads currently sending messages have returned (new threads after
    // flushing=true) will block
    // flushing is set to true in startFlusher()
    while (flushing && running) {
      if (in_flight_sends.get() == 0) break;
      Thread.sleep(100);
    }

    send_lock.lockInterruptibly();
    try {
      if (log.isTraceEnabled())
        log.trace(local_addr + ": coord changed from " + coord + " to " + new_coord);
      coord = new_coord;
      is_coord = Objects.equals(local_addr, coord);
      flushMessagesInForwardTable();
    } finally {
      if (log.isTraceEnabled()) log.trace(local_addr + ": flushing completed");
      flushing = false;
      ack_mode = true; // go to ack-mode after flushing
      num_acks = 0;
      send_cond.signalAll();
      send_lock.unlock();
    }
  }
Пример #16
0
  private void send(Address dest) throws Exception {
    final CountDownLatch latch = new CountDownLatch(1);
    final BlockingReceiver receiver = new BlockingReceiver(latch);
    final int NUM = 10;
    b.setReceiver(receiver);

    a.send(dest, 1); // the only regular message
    for (int i = 2; i <= NUM; i++) a.send(new Message(dest, i).setFlag(Message.Flag.OOB));

    sendStableMessages(a, b);
    List<Integer> list = receiver.getMsgs();
    for (int i = 0; i < 20; i++) {
      if (list.size() == NUM - 1) break;
      sendStableMessages(a, b);
      Util.sleep(500); // give the asynchronous msgs some time to be received
    }

    System.out.println("list = " + list);
    assert list.size() == NUM - 1 : "list is " + list;
    assert list.contains(2) && list.contains(10);

    System.out.println("[" + Thread.currentThread().getName() + "]: releasing latch");
    latch.countDown();

    for (int i = 0; i < 20; i++) {
      if (list.size() == NUM) break;
      sendStableMessages(a, b);
      Util.sleep(1000); // give the asynchronous msgs some time to be received
    }

    System.out.println("list = " + list);
    assert list.size() == NUM : "list is " + list;
    for (int i = 1; i <= NUM; i++) assert list.contains(i);
  }
Пример #17
0
    protected long await(long nanoSeconds) throws InterruptedException {
      long target_nano = System.nanoTime() + nanoSeconds;

      if (!signaled.get()) {
        // We release the lock at the same time as waiting on the
        // condition
        lock.acquired = false;
        sendAwaitConditionRequest(lock.name, lock.owner);

        boolean interrupted = false;
        while (!signaled.get()) {
          long wait_nano = target_nano - System.nanoTime();
          // If we waited max time break out
          if (wait_nano > 0) {
            parker.set(Thread.currentThread());
            LockSupport.parkNanos(this, wait_nano);

            if (Thread.interrupted()) {
              // If we were interrupted and haven't received a response yet then we try to
              // clean up the lock request and throw the exception
              if (!signaled.get()) {
                sendDeleteAwaitConditionRequest(lock.name, lock.owner);
                throw new InterruptedException();
              }
              // In the case that we were signaled and interrupted
              // we want to return the signal but still interrupt
              // our thread
              interrupted = true;
            }
          } else {
            break;
          }
        }
        if (interrupted) Thread.currentThread().interrupt();
      }

      // We set as if this signal was no released.  This way if the
      // condition is reused again, but the client condition isn't lost
      // we won't think we were signaled immediately
      // If we weren't signaled then delete our request
      if (!signaled.getAndSet(false)) {
        sendDeleteAwaitConditionRequest(lock.name, lock.owner);
      }
      return target_nano - System.nanoTime();
    }
Пример #18
0
  private void send(Address dest) throws ChannelNotConnectedException, ChannelClosedException {
    final ReentrantLock lock = new ReentrantLock();
    final BlockingReceiver receiver = new BlockingReceiver(lock);
    final int NUM = 10;
    c2.setReceiver(receiver);

    System.out.println("[" + Thread.currentThread().getName() + "]: locking lock");
    lock.lock();
    c1.send(new Message(dest, null, 1));
    for (int i = 2; i <= NUM; i++) {
      Message msg = new Message(dest, null, i);
      msg.setFlag(Message.OOB);
      c1.send(msg);
    }
    sendStableMessages(c1, c2);
    Util.sleep(500);

    List<Integer> list = receiver.getMsgs();
    for (int i = 0; i < 20; i++) {
      if (list.size() == NUM - 1) break;
      System.out.println("list = " + list);
      Util.sleep(1000); // give the asynchronous msgs some time to be received
    }

    System.out.println("list = " + list);

    assert list.size() == NUM - 1 : "list is " + list;
    assert list.contains(2) && list.contains(10);

    System.out.println("[" + Thread.currentThread().getName() + "]: unlocking lock");
    lock.unlock();

    for (int i = 0; i < 20; i++) {
      if (list.size() == NUM) break;
      System.out.println("list = " + list);
      Util.sleep(1000); // give the asynchronous msgs some time to be received
    }

    System.out.println("list = " + list);
    assert list.size() == NUM : "list is " + list;
    for (int i = 1; i <= NUM; i++) assert list.contains(i);
  }
Пример #19
0
  /** Starts the unicast and multicast receiver threads */
  void startThreads() throws Exception {
    if (ucast_receiver == null) {
      // start the listener thread of the ucast_recv_sock
      ucast_receiver = new UcastReceiver();
      ucast_receiver.start();
      if (Trace.trace) {
        Trace.info("UDP.startThreads()", "created unicast receiver thread");
      }
    }

    if (ip_mcast) {
      if (mcast_receiver != null) {
        if (mcast_receiver.isAlive()) {
          if (Trace.trace) {
            Trace.info(
                "UDP.createThreads()",
                "did not create new multicastreceiver thread as existing "
                    + "multicast receiver thread is still running");
          }
        } else {
          mcast_receiver = null; // will be created just below...
        }
      }

      if (mcast_receiver == null) {
        mcast_receiver = new Thread(this, "UDP mcast receiver");
        mcast_receiver.setPriority(Thread.MAX_PRIORITY); // needed ????
        mcast_receiver.setDaemon(true);
        mcast_receiver.start();
      }
    }
    if (use_outgoing_packet_handler) {
      outgoing_packet_handler.start();
    }
    if (use_incoming_packet_handler) {
      incoming_packet_handler.start();
    }
  }
Пример #20
0
  protected void handleTaskSubmittedRequest(
      Runnable runnable, Address source, long requestId, long threadId) {
    // We store in our map so that when that task is
    // finished so that we can send back to the owner
    // with the results
    _running.put(runnable, new Owner(source, requestId));
    // We give the task to the thread that is now waiting for it to be returned
    // If we can't offer then we have to respond back to
    // caller that we can't handle it.  They must have
    // gotten our address when we had a consumer, but
    // they went away between then and now.
    boolean received;
    try {
      _tasks.put(threadId, runnable);

      CyclicBarrier barrier = _taskBarriers.remove(threadId);
      if (received = (barrier != null)) {
        // Only wait 10 milliseconds, in case if the consumer was
        // stopped between when we were told it was available and now
        barrier.await(10, TimeUnit.MILLISECONDS);
      }
    } catch (InterruptedException e) {
      if (log.isDebugEnabled()) log.debug("Interrupted while handing off task");
      Thread.currentThread().interrupt();
      received = false;
    } catch (BrokenBarrierException e) {
      if (log.isDebugEnabled())
        log.debug(
            "Consumer " + threadId + " has been interrupted, " + "must retry to submit elsewhere");
      received = false;
    } catch (TimeoutException e) {
      if (log.isDebugEnabled())
        log.debug("Timeout waiting to hand off to barrier, consumer " + threadId + " must be slow");
      // This should only happen if the consumer put the latch then got
      // interrupted but hadn't yet removed the latch, should almost never
      // happen
      received = false;
    }

    if (!received) {
      // Clean up the tasks request
      _tasks.remove(threadId);
      if (log.isDebugEnabled()) log.debug("Run rejected not able to pass off to consumer");
      // If we couldn't hand off the task we have to tell the client
      // and also reupdate the coordinator that our consumer is ready
      sendRequest(source, Type.RUN_REJECTED, requestId, null);
      _running.remove(runnable);
    }
  }
Пример #21
0
 public ReceiverThread() {
   nullifier =
       new Thread(
           new Runnable() {
             public void run() {
               // nullifies throughput display
               while (running) {
                 Util.sleep(2000);
                 if ((System.currentTimeMillis() - startTimeThroughput) > 2000) {
                   control.throughput.setText("0 KB/sec");
                 }
               }
             }
           });
   nullifier.start();
 }
Пример #22
0
    protected synchronized boolean acquireTryLock(long timeout, boolean use_timeout)
        throws InterruptedException {
      if (denied) return false;
      if (!acquired) {
        is_trylock = true;
        this.timeout = timeout;
        if (owner == null) owner = getOwner();
        sendGrantLockRequest(name, owner, timeout, true);

        long target_time = use_timeout ? System.currentTimeMillis() + timeout : 0;
        boolean interrupted = false;
        while (!acquired && !denied) {
          if (use_timeout) {
            long wait_time = target_time - System.currentTimeMillis();
            if (wait_time <= 0) break;
            else {
              this.timeout = wait_time;
              try {
                this.wait(wait_time);
              } catch (InterruptedException e) {
                // If we were interrupted and haven't received a response yet then we try to
                // clean up the lock request and throw the exception
                if (!acquired && !denied) {
                  _unlock(true);
                  throw e;
                }
                // In the case that we were told if we acquired or denied the lock then return that,
                // but
                // make sure we set the interrupt status
                interrupted = true;
              }
            }
          } else {
            try {
              this.wait();
            } catch (InterruptedException e) {
              interrupted = true;
            }
          }
        }
        if (interrupted) Thread.currentThread().interrupt();
      }
      if (!acquired || denied) _unlock(true);
      return acquired && !denied;
    }
Пример #23
0
    @Override
    public void await() throws InterruptedException {
      InterruptedException ex = null;
      try {
        await(true);
      } catch (InterruptedException e) {
        ex = e;
        throw ex;
      } finally {
        lock.lock();

        // If we are throwing an InterruptedException
        // then clear the interrupt state as well.
        if (ex != null) {
          Thread.interrupted();
        }
      }
    }
Пример #24
0
  /**
   * Initialisation if a supplied key is defined in the properties. This supplied key must be in a
   * keystore which can be generated using the keystoreGenerator file in demos. The keystore must be
   * on the classpath to find it.
   *
   * @throws KeyStoreException
   * @throws Exception
   * @throws IOException
   * @throws NoSuchAlgorithmException
   * @throws CertificateException
   * @throws UnrecoverableKeyException
   */
  private void initConfiguredKey() throws Exception {
    InputStream inputStream = null;
    // must not use default keystore type - as does not support secret keys
    KeyStore store = KeyStore.getInstance("JCEKS");

    SecretKey tempKey = null;
    try {
      // load in keystore using this thread's classloader
      inputStream =
          Thread.currentThread().getContextClassLoader().getResourceAsStream(keyStoreName);
      if (inputStream == null) inputStream = new FileInputStream(keyStoreName);
      // we can't find a keystore here -
      if (inputStream == null) {
        throw new Exception(
            "Unable to load keystore " + keyStoreName + " ensure file is on classpath");
      }
      // we have located a file lets load the keystore
      try {
        store.load(inputStream, storePassword.toCharArray());
        // loaded keystore - get the key
        tempKey = (SecretKey) store.getKey(alias, keyPassword.toCharArray());
      } catch (IOException e) {
        throw new Exception("Unable to load keystore " + keyStoreName + ": " + e);
      } catch (NoSuchAlgorithmException e) {
        throw new Exception("No Such algorithm " + keyStoreName + ": " + e);
      } catch (CertificateException e) {
        throw new Exception("Certificate exception " + keyStoreName + ": " + e);
      }

      if (tempKey == null)
        throw new Exception("Unable to retrieve key '" + alias + "' from keystore " + keyStoreName);
      // set the key here
      setSecretKey(tempKey);

      if (symAlgorithm.equals(DEFAULT_SYM_ALGO)) symAlgorithm = tempKey.getAlgorithm();

      // set the fact we are using a supplied key
      suppliedKey = true;
      queue_down = queue_up = false;
    } finally {
      Util.close(inputStream);
    }
  }
Пример #25
0
    @Override
    public long awaitNanos(long nanosTimeout) throws InterruptedException {
      long beforeLock;
      InterruptedException ex = null;
      try {
        beforeLock = await(nanosTimeout) + System.nanoTime();
      } catch (InterruptedException e) {
        ex = e;
        throw ex;
      } finally {
        lock.lock();

        // If we are throwing an InterruptedException
        // then clear the interrupt state as well.
        if (ex != null) {
          Thread.interrupted();
        }
      }

      return beforeLock - System.nanoTime();
    }
Пример #26
0
    public void run() {
      long end_time, wait_time;
      List<Request> requests = new LinkedList<Request>();
      while (Thread.currentThread().equals(thread) && !suspended) {
        try {
          boolean keepGoing = false;
          end_time = System.currentTimeMillis() + max_bundling_time;
          do {
            Request firstRequest =
                (Request)
                    queue.remove(INTERVAL); // throws a TimeoutException if it runs into timeout
            requests.add(firstRequest);
            if (!view_bundling) break;
            if (queue.size() > 0) {
              Request nextReq = (Request) queue.peek();
              keepGoing = view_bundling && firstRequest.canBeProcessedTogether(nextReq);
            } else {
              wait_time = end_time - System.currentTimeMillis();
              if (wait_time > 0)
                queue.waitUntilClosed(
                    wait_time); // misnomer: waits until element has been added or q closed
              keepGoing =
                  queue.size() > 0 && firstRequest.canBeProcessedTogether((Request) queue.peek());
            }
          } while (keepGoing && System.currentTimeMillis() < end_time);

          try {
            process(requests);
          } finally {
            requests.clear();
          }
        } catch (QueueClosedException e) {
          break;
        } catch (TimeoutException e) {
          break;
        } catch (Throwable catchall) {
          Util.sleep(50);
        }
      }
    }
Пример #27
0
  /** Tests 2 channels calling partial FLUSHes and one calling FLUSH simultaneously */
  @Test
  public void testConcurrentFlushAndPartialFlush() throws Exception {
    c1 = createChannel(true, 3);
    c1.connect("testConcurrentFlushAndPartialFlush");

    c2 = createChannel(c1);
    c2.connect("testConcurrentFlushAndPartialFlush");

    c3 = createChannel(c1);
    c3.connect("testConcurrentFlushAndPartialFlush");
    assertViewsReceived(c1, c2, c3);

    final CountDownLatch startFlushLatch = new CountDownLatch(1);
    final CountDownLatch stopFlushLatch = new CountDownLatch(1);

    // 2 because either total or partial has to finish first
    final CountDownLatch flushStartReceived = new CountDownLatch(2);

    // 5 because we have total and partial flush
    final CountDownLatch flushStopReceived = new CountDownLatch(5);

    Thread t1 =
        new Thread() {
          public void run() {
            try {
              startFlushLatch.await();
              boolean rc = Util.startFlush(c1);
              System.out.println("t1: rc=" + rc);
            } catch (InterruptedException e) {
              interrupt();
            }

            try {
              stopFlushLatch.await();
            } catch (InterruptedException e) {
              interrupt();
            } finally {
              c1.stopFlush();
            }
          }
        };

    Thread t2 =
        new Thread() {
          public void run() {
            try {
              startFlushLatch.await();
              // partial, only between c2 and c3
              boolean rc = Util.startFlush(c2, (Arrays.asList(c2.getAddress(), c3.getAddress())));
              System.out.println("t2: partial flush rc=" + rc);
            } catch (InterruptedException e) {
              interrupt();
            }

            try {
              stopFlushLatch.await();
            } catch (InterruptedException e) {
              interrupt();
            } finally {
              c2.stopFlush(Arrays.asList(c2.getAddress(), c3.getAddress()));
            }
          }
        };

    Listener l1 = new Listener("c1", c1, flushStartReceived, flushStopReceived);
    Listener l2 = new Listener("c2", c2, flushStartReceived, flushStopReceived);
    Listener l3 = new Listener("c3", c3, flushStartReceived, flushStopReceived);

    t1.start();
    t2.start();

    startFlushLatch.countDown();

    assertTrue(flushStartReceived.await(60, TimeUnit.SECONDS));

    // at this stage both channels should have started a flush?
    stopFlushLatch.countDown();

    t1.join();
    t2.join();

    assertTrue(flushStopReceived.await(60, TimeUnit.SECONDS));

    assert l1.blockReceived;
    assert l1.unblockReceived;
    assert l2.blockReceived;
    assert l2.unblockReceived;
    assert l3.blockReceived;
    assert l3.unblockReceived;
  }
Пример #28
0
  public Object down(Event evt) {
    switch (evt.getType()) {
      case ExecutorEvent.TASK_SUBMIT:
        Runnable runnable = evt.getArg();
        // We are limited to a number of concurrent request id's
        // equal to 2^63-1.  This is quite large and if it
        // overflows it will still be positive
        long requestId = Math.abs(counter.getAndIncrement());
        if (requestId == Long.MIN_VALUE) {
          // TODO: need to fix this it isn't safe for concurrent modifications
          counter.set(0);
          requestId = Math.abs(counter.getAndIncrement());
        }

        // Need to make sure to put the requestId in our map before
        // adding the runnable to awaiting consumer in case if
        // coordinator sent a consumer found and their original task
        // is no longer around
        // see https://issues.jboss.org/browse/JGRP-1744
        _requestId.put(runnable, requestId);

        _awaitingConsumer.add(runnable);

        sendToCoordinator(RUN_REQUEST, requestId, local_addr);
        break;
      case ExecutorEvent.CONSUMER_READY:
        Thread currentThread = Thread.currentThread();
        long threadId = currentThread.getId();
        _consumerId.put(threadId, PRESENT);
        try {
          for (; ; ) {
            CyclicBarrier barrier = new CyclicBarrier(2);
            _taskBarriers.put(threadId, barrier);

            // We only send to the coordinator that we are ready after
            // making the barrier, wait for request to come and let
            // us free
            sendToCoordinator(Type.CONSUMER_READY, threadId, local_addr);

            try {
              barrier.await();
              break;
            } catch (BrokenBarrierException e) {
              if (log.isDebugEnabled())
                log.debug(
                    "Producer timed out before we picked up"
                        + " the task, have to tell coordinator"
                        + " we are still good.");
            }
          }
          // This should always be non nullable since the latch
          // was freed
          runnable = _tasks.remove(threadId);
          _runnableThreads.put(runnable, currentThread);
          return runnable;
        } catch (InterruptedException e) {
          if (log.isDebugEnabled()) log.debug("Consumer " + threadId + " stopped via interrupt");
          sendToCoordinator(Type.CONSUMER_UNREADY, threadId, local_addr);
          Thread.currentThread().interrupt();
        } finally {
          // Make sure the barriers are cleaned up as well
          _taskBarriers.remove(threadId);
          _consumerId.remove(threadId);
        }
        break;
      case ExecutorEvent.TASK_COMPLETE:
        Object arg = evt.getArg();
        Throwable throwable = null;
        if (arg instanceof Object[]) {
          Object[] array = (Object[]) arg;
          runnable = (Runnable) array[0];
          throwable = (Throwable) array[1];
        } else {
          runnable = (Runnable) arg;
        }
        Owner owner = _running.remove(runnable);
        // This won't remove anything if owner doesn't come back
        _runnableThreads.remove(runnable);

        Object value = null;
        boolean exception = false;
        if (throwable != null) {
          // InterruptedException is special telling us that
          // we interrupted the thread while waiting but still got
          // a task therefore we have to reject it.
          if (throwable instanceof InterruptedException) {
            if (log.isDebugEnabled())
              log.debug("Run rejected due to interrupted exception returned");
            sendRequest(owner.address, Type.RUN_REJECTED, owner.requestId, null);
            break;
          }
          value = throwable;
          exception = true;
        } else if (runnable instanceof RunnableFuture<?>) {
          RunnableFuture<?> future = (RunnableFuture<?>) runnable;

          boolean interrupted = false;
          boolean gotValue = false;

          // We have the value, before we interrupt at least get it!
          while (!gotValue) {
            try {
              value = future.get();
              gotValue = true;
            } catch (InterruptedException e) {
              interrupted = true;
            } catch (ExecutionException e) {
              value = e.getCause();
              exception = true;
              gotValue = true;
            }
          }

          if (interrupted) {
            Thread.currentThread().interrupt();
          }
        }

        if (owner != null) {
          final Type type;
          final Object valueToSend;
          if (value == null) {
            type = Type.RESULT_SUCCESS;
            valueToSend = value;
          }
          // Both serializable values and exceptions would go in here
          else if (value instanceof Serializable
              || value instanceof Externalizable
              || value instanceof Streamable) {
            type = exception ? Type.RESULT_EXCEPTION : Type.RESULT_SUCCESS;
            valueToSend = value;
          }
          // This would happen if the value wasn't serializable,
          // so we have to send back to the client that the class
          // wasn't serializable
          else {
            type = Type.RESULT_EXCEPTION;
            valueToSend = new NotSerializableException(value.getClass().getName());
          }

          if (local_addr.equals(owner.getAddress())) {
            if (log.isTraceEnabled())
              log.trace(
                  "[redirect] <--> ["
                      + local_addr
                      + "] "
                      + type.name()
                      + " ["
                      + value
                      + (owner.requestId != -1 ? " request id: " + owner.requestId : "")
                      + "]");
            if (type == Type.RESULT_SUCCESS) {
              handleValueResponse(local_addr, owner.requestId, valueToSend);
            } else if (type == Type.RESULT_EXCEPTION) {
              handleExceptionResponse(local_addr, owner.requestId, (Throwable) valueToSend);
            }
          } else {
            sendRequest(owner.getAddress(), type, owner.requestId, valueToSend);
          }
        } else {
          if (log.isTraceEnabled()) {
            log.trace("Could not return result - most likely because it was interrupted");
          }
        }
        break;
      case ExecutorEvent.TASK_CANCEL:
        Object[] array = evt.getArg();
        runnable = (Runnable) array[0];

        if (_awaitingConsumer.remove(runnable)) {
          _requestId.remove(runnable);
          ExecutorNotification notification = notifiers.remove(runnable);
          if (notification != null) {
            notification.interrupted(runnable);
          }
          if (log.isTraceEnabled())
            log.trace("Cancelled task " + runnable + " before it was picked up");
          return Boolean.TRUE;
        }
        // This is guaranteed to not be null so don't take cost of auto unboxing
        else if (array[1] == Boolean.TRUE) {
          owner = removeKeyForValue(_awaitingReturn, runnable);
          if (owner != null) {
            Long requestIdValue = _requestId.remove(runnable);
            // We only cancel if the requestId is still available
            // this means the result hasn't been returned yet and
            // we still have a chance to interrupt
            if (requestIdValue != null) {
              if (requestIdValue != owner.getRequestId()) {
                log.warn("Cancelling requestId didn't match waiting");
              }
              sendRequest(owner.getAddress(), Type.INTERRUPT_RUN, owner.getRequestId(), null);
            }
          } else {
            if (log.isTraceEnabled()) log.warn("Couldn't interrupt server task: " + runnable);
          }
          ExecutorNotification notification = notifiers.remove(runnable);
          if (notification != null) {
            notification.interrupted(runnable);
          }
          return Boolean.TRUE;
        } else {
          return Boolean.FALSE;
        }
      case ExecutorEvent.ALL_TASK_CANCEL:
        array = evt.getArg();

        // This is a RunnableFuture<?> so this cast is okay
        @SuppressWarnings("unchecked")
        Set<Runnable> runnables = (Set<Runnable>) array[0];
        Boolean booleanValue = (Boolean) array[1];

        List<Runnable> notRan = new ArrayList<>();

        for (Runnable cancelRunnable : runnables) {
          // Removed from the consumer
          if (!_awaitingConsumer.remove(cancelRunnable) && booleanValue == Boolean.TRUE) {
            synchronized (_awaitingReturn) {
              owner = removeKeyForValue(_awaitingReturn, cancelRunnable);
              if (owner != null) {
                Long requestIdValue = _requestId.remove(cancelRunnable);
                if (requestIdValue != owner.getRequestId()) {
                  log.warn("Cancelling requestId didn't match waiting");
                }
                sendRequest(owner.getAddress(), Type.INTERRUPT_RUN, owner.getRequestId(), null);
              }
              ExecutorNotification notification = notifiers.remove(cancelRunnable);
              if (notification != null) {
                log.trace("Notifying listener");
                notification.interrupted(cancelRunnable);
              }
            }
          } else {
            _requestId.remove(cancelRunnable);
            notRan.add(cancelRunnable);
          }
        }
        return notRan;
      case Event.SET_LOCAL_ADDRESS:
        local_addr = evt.getArg();
        break;

      case Event.VIEW_CHANGE:
        handleView(evt.getArg());
        break;
    }
    return down_prot.down(evt);
  }
Пример #29
0
  /** Tests 2 channels calling FLUSH simultaneously */
  @Test
  public void testConcurrentFlush() throws Exception {
    c1 = createChannel(true, 2);
    c1.connect("testConcurrentFlush");
    c2 = createChannel(c1);
    c2.connect("testConcurrentFlush");

    assertViewsReceived(c1, c2);

    final CountDownLatch startFlushLatch = new CountDownLatch(1);
    final CountDownLatch stopFlushLatch = new CountDownLatch(1);
    final CountDownLatch flushStartReceived = new CountDownLatch(2);
    final CountDownLatch flushStopReceived = new CountDownLatch(2);

    Thread t1 =
        new Thread() {
          public void run() {
            try {
              startFlushLatch.await();
              boolean rc = Util.startFlush(c1);
              System.out.println("t1: rc=" + rc);
            } catch (InterruptedException e) {
              interrupt();
            }

            try {
              stopFlushLatch.await();
            } catch (InterruptedException e) {
              interrupt();
            } finally {
              c1.stopFlush();
            }
          }
        };

    Thread t2 =
        new Thread() {
          public void run() {
            try {
              startFlushLatch.await();
              boolean rc = Util.startFlush(c2);
              System.out.println("t2: rc=" + rc);
            } catch (InterruptedException e) {
              interrupt();
            }

            try {
              stopFlushLatch.await();
            } catch (InterruptedException e) {
              interrupt();
            } finally {
              c2.stopFlush();
            }
          }
        };

    Listener l1 = new Listener("c1", c1, flushStartReceived, flushStopReceived);
    Listener l2 = new Listener("c2", c2, flushStartReceived, flushStopReceived);
    t1.start();
    t2.start();

    startFlushLatch.countDown();

    assertTrue(flushStartReceived.await(60, TimeUnit.SECONDS));

    // at this stage both channels should have started a flush
    stopFlushLatch.countDown();

    t1.join();
    t2.join();

    assertTrue(flushStopReceived.await(60, TimeUnit.SECONDS));

    assert l1.blockReceived;
    assert l1.unblockReceived;
    assert l2.blockReceived;
    assert l2.unblockReceived;
  }
Пример #30
0
 public synchronized void stop() {
   Thread tmp = thread;
   if (thread != null && thread.isAlive()) tmp.interrupt();
   thread = null;
 }