Пример #1
0
  public static void packColumns(Table table, boolean fit) {
    table.setRedraw(false);
    try {
      int totalWidth = 0;
      final TableColumn[] columns = table.getColumns();
      for (TableColumn column : columns) {
        column.pack();
        totalWidth += column.getWidth();
      }
      final Rectangle clientArea = table.getClientArea();
      if (clientArea.width > 0 && totalWidth > clientArea.width) {
        for (TableColumn column : columns) {
          int colWidth = column.getWidth();
          if (colWidth > totalWidth / 3) {
            // If some columns is too big (more than 33% of total width)
            // Then shrink it to 30%
            column.setWidth(totalWidth / 3);
            totalWidth -= colWidth;
            totalWidth += column.getWidth();
          }
        }
        int extraSpace = totalWidth - clientArea.width;

        for (TableColumn tc : columns) {
          double ratio = (double) tc.getWidth() / totalWidth;
          int newWidth = (int) (tc.getWidth() - extraSpace * ratio);
          tc.setWidth(newWidth);
        }
      }
      if (fit && totalWidth < clientArea.width) {
        int sbWidth = 0;
        if (table.getVerticalBar() != null) {
          sbWidth = table.getVerticalBar().getSize().x;
        }
        if (columns.length > 0) {
          float extraSpace = (clientArea.width - totalWidth - sbWidth) / columns.length;
          for (TableColumn tc : columns) {
            tc.setWidth((int) (tc.getWidth() + extraSpace));
          }
        }
      }
    } finally {
      table.setRedraw(true);
    }
  }
Пример #2
0
  public Shell open(Display display) {
    shell = new Shell(display);
    shell.setLayout(new FillLayout());
    shell.addShellListener(
        new ShellAdapter() {
          @Override
          public void shellClosed(ShellEvent e) {
            e.doit = closeAddressBook();
          }
        });

    createMenuBar();

    searchDialog = new SearchDialog(shell);
    searchDialog.setSearchAreaNames(columnNames);
    searchDialog.setSearchAreaLabel(resAddressBook.getString("Column"));
    searchDialog.addFindListener(
        new FindListener() {
          public boolean find() {
            return findEntry();
          }
        });

    table = new Table(shell, SWT.SINGLE | SWT.BORDER | SWT.FULL_SELECTION);
    table.setHeaderVisible(true);
    table.setMenu(createPopUpMenu());
    table.addSelectionListener(
        new SelectionAdapter() {
          @Override
          public void widgetDefaultSelected(SelectionEvent e) {
            TableItem[] items = table.getSelection();
            if (items.length > 0) editEntry(items[0]);
          }
        });
    for (int i = 0; i < columnNames.length; i++) {
      TableColumn column = new TableColumn(table, SWT.NONE);
      column.setText(columnNames[i]);
      column.setWidth(150);
      final int columnIndex = i;
      column.addSelectionListener(
          new SelectionAdapter() {
            @Override
            public void widgetSelected(SelectionEvent e) {
              sort(columnIndex);
            }
          });
    }

    newAddressBook();

    shell.setSize(table.computeSize(SWT.DEFAULT, SWT.DEFAULT).x, 300);
    shell.open();
    return shell;
  }
Пример #3
0
 public static void maxTableColumnsWidth(Table table) {
   table.setRedraw(false);
   try {
     int columnCount = table.getColumnCount();
     if (columnCount > 0) {
       int totalWidth = 0;
       final TableColumn[] columns = table.getColumns();
       for (TableColumn tc : columns) {
         tc.pack();
         totalWidth += tc.getWidth();
       }
       final Rectangle clientArea = table.getClientArea();
       if (totalWidth < clientArea.width) {
         int extraSpace = clientArea.width - totalWidth;
         extraSpace /= columnCount;
         for (TableColumn tc : columns) {
           tc.setWidth(tc.getWidth() + extraSpace);
         }
       }
     }
   } finally {
     table.setRedraw(true);
   }
 }
  private void createComp(Composite group) {

    GridLayout layout = new GridLayout(1, false);
    layout.verticalSpacing = 10;
    group.setLayout(layout);

    // TableViewer是通过Table来布局的
    // 制作表格   MULTI可多选  H_SCROLL有水平 滚动条、V_SCROLL有垂直滚动条、BORDER有边框、FULL_SELECTION整行选择
    table = new Table(group, SWT.SINGLE | SWT.FULL_SELECTION | SWT.BORDER | SWT.VIRTUAL); // 注意此处的设置
    TableLayout tableLayout = new TableLayout();
    table.setLayout(tableLayout);

    // 指定Table单元格的宽度和高度
    table.addListener(
        SWT.MeasureItem,
        new Listener() { // 向表格增加一个SWT.MeasureItem监听器,每当需要单元内容的大小的时候就会被调用。
          public void handleEvent(Event event) {
            event.width = table.getGridLineWidth(); // 设置宽度
            event.height =
                (int) Math.floor(event.gc.getFontMetrics().getHeight() * 1.5); // 设置高度为字体高度的1.5倍
          }
        });

    // 表格的视图
    tableViewer = new TableViewer(table);
    // 标题和网格线可见
    tableViewer.getTable().setLinesVisible(true);
    tableViewer.getTable().setHeaderVisible(true);
    // 设置填充
    // GridData data = new GridData(SWT.LEFT,SWT.CENTER, true, false);//SWT.FILL, SWT.FILL, true,
    // false  xbm
    GridData data = new GridData(GridData.FILL_BOTH);
    data.widthHint = 350;
    data.heightHint = 295;
    data.grabExcessHorizontalSpace = true;
    tableViewer.getTable().setLayoutData(data); // 表格的布局

    // 创建表格列的标题
    int width = 1;
    for (int i = 0; i < stationData.getColumnCount(); i++) {
      width = stationData.getColumnWidth(i);
      TableColumn column = new TableColumn(table, SWT.NONE);
      column.setWidth((int) (width * 8));
      column.setText(stationData.getColumnHeads()[i]); // 设置表头
      column.setAlignment(SWT.LEFT); // 对齐方式SWT.LEFT
      if (i == 0) // 站名
      {
        // 列的选择事件  实现排序
        column.addSelectionListener(
            new SelectionAdapter() {
              boolean sortType = true; // sortType记录上一次的排序方式,默认为升序

              public void widgetSelected(SelectionEvent e) {
                sortType = !sortType; // 取反。下一次排序方式要和这一次的相反
                tableViewer.setSorter(new StationSorter(sortType, stationData.columnHeads[0]));
              }
            });
      }
    }

    /*tableLayout.addColumnData(new ColumnWeightData(8, 8, false));//设置列宽为8像素
     TableColumn column_one = new TableColumn(table, SWT.NONE);//SWT.LEFT
     column_one.setText(stationData.COLUMN_HEADINGS[0]);//设置表头
     column_one.setAlignment(SWT.LEFT);//对齐方式SWT.LEFT
     column.setWidth(10);//宽度
    */

    // 设置标题的提供者
    tableViewer.setLabelProvider(new TableLabelProvider());

    // 设置表格视图的内容提供者
    tableViewer.setContentProvider(new TableContentProvider());

    // 设置列的属性.
    tableViewer.setColumnProperties(stationData.columnHeads);

    // 定义每一列的别名
    tableViewer.setColumnProperties(new String[] {"name", "down", "up", "map"});

    // 设置每一列的单元格编辑组件CellEditor
    CellEditor[] celleditors = new CellEditor[5];
    // 文本编辑框
    celleditors[0] = null;
    celleditors[1] = new TextCellEditor(table);
    celleditors[2] = new TextCellEditor(table);
    // CheckboxCellEditor(table) 复选框
    celleditors[3] = new ComboBoxCellEditor(table, StationData.MAPS, SWT.READ_ONLY); // 下拉框

    Text text = (Text) celleditors[1].getControl(); // 设置第down列只能输入数值
    text.addVerifyListener(
        new VerifyListener() {
          public void verifyText(VerifyEvent e) {
            // 输入控制键,输入中文,输入字符,输入数字 正整数验证
            Pattern pattern = Pattern.compile("[0-9]\\d*"); // 正则表达式
            Matcher matcher = pattern.matcher(e.text);
            if (matcher.matches()) // 处理数字
            {
              /*if(Integer.parseInt(e.text) != 0)//确保输入的数字不是0
              			e.doit = true;
              		else
              			e.doit = false;
              */
              e.doit = true;
            } else if (e.text.length() > 0) // 字符: 包含中文、空格
            e.doit = false;
            else // 控制键
            e.doit = true;
          }
        });

    Text text1 = (Text) celleditors[2].getControl(); // 设置第up列只能输入数值
    text1.addVerifyListener(
        new VerifyListener() {
          public void verifyText(VerifyEvent e) {
            String inStr = e.text;
            if (inStr.length() > 0) {
              e.doit = NumberUtils.isDigits(inStr);
            }
          }
        });

    table.addMouseMoveListener(
        new MouseMoveListener() {
          public void mouseMove(MouseEvent e) {
            if (StationData.reloadFlag) {
              getStationInfo();
              openCurrentTable(row);
              StationData.reloadFlag = false;
              // System.out.println("entry");
            }
          }
        });
    /*table.addFocusListener(new FocusListener(){
    public void focusGained(FocusEvent e) {
    	getStationInfo();
    	openCurrentTable(row);
    }
    @Override
    public void focusLost(FocusEvent e) {
    }
      });
         */
    tableViewer.setCellEditors(celleditors);

    // 设置单元的更改器
    tableViewer.setCellModifier(new TableCellModifier());

    tableViewer.addFilter(new TableViewerFilter()); // 过滤器

    // 构造工具条
    Composite buttonComposite = new Composite(group, SWT.NONE);
    buttonComposite.setLayoutData(new GridData(SWT.CENTER, SWT.CENTER, false, false)); // 使工具条居中
    Action actionModify =
        new Action("更新") {
          public void run() {
            // 取得用户所选择的第一行, 若没有选择则为null
            IStructuredSelection selection = (IStructuredSelection) tableViewer.getSelection();
            // 获取选中的第一行数据
            Station station = (Station) selection.getFirstElement();
            if (station != null) {
              if (updateStationInfo(
                  station.getStation_downnumber(),
                  station.getStation_upnumber(),
                  station.getStation_graph(),
                  station.getStation_name())) {
                showMsg("成功更新!");
                // 表格的刷新方法,界面会重新读取数据并显示

                pushCommand();

                tableViewer.refresh(); // false
              } else {
                showMsg("更新失败!");
                // tableViewer.refresh();//false
              }
            } else {
              showMsg("请选取进行更新的行!");
            }
          }
        };

    Action actionDelete =
        new Action("删除") {
          public void run() {
            // 取得用户所选择的第一行, 若没有选择则为null
            IStructuredSelection selection = (IStructuredSelection) tableViewer.getSelection();
            // 获取选中的第一个数据
            Station station = (Station) selection.getFirstElement();
            if (station != null) {
              // 先预先移动到下一行
              Table table = tableViewer.getTable();

              // int i = table.getSelectionIndex(); //取得当前所选行的序号,如没有则返回-1
              // table.setSelection(i + 1); //当前选择行移下一行
              // 确认删除
              MessageBox messageBox =
                  new MessageBox(shell, SWT.YES | SWT.NO | SWT.ICON_INFORMATION);
              messageBox.setText("提示信息");
              messageBox.setMessage("确定要删除此记录吗?");
              // SWT.YES 是  // SWT.NO 否 // SWT.CANCEL 取消 // SWT.RETRY 重试// SWT.ABORT 放弃// SWT.IGNORE
              // 忽略
              if (messageBox.open() == SWT.YES) {
                if (deleteStationInfo(station.getStation_name())) // 从数据库中删除记录
                {
                  // showMsg("成功删除!");
                  ((List) tableViewer.getInput()).remove(station); // 数据模型的List容器中删除
                  stationData.remove(station.getStation_name());
                  openCurrentTable(row);
                  tableViewer.remove(station); // 从表格界面上删除

                  pushCommand();
                } else showMsg("删除失败!");
              }
            } else {
              showMsg("请选取要删除的纪录!");
            }
          }
        };

    Action actionClear = new Action("清空") { // 清除所显示内容,点击保存后更新库
          public void run() {
            if (clearStationInfo()) {
              showMsg("清空操作成功!");
              stationData.removeAll();
              openCurrentTable(row);

              pushCommand();
            } else showMsg("清空操作失败!");
          }
        };
    Action actionHelp =
        new Action("帮助") {
          public void run() {
            String str = "更新:\n\r" + "先对某行内容进行修改,然后点击更新进行保存\n\r" + "清空:\n\r" + "从库中物理删除所有记录";
            showMsg(str);
          }
        };

    Action nextPage =
        new Action("下一页") {
          public void run() {
            row++;
            if (row > stationData.getTotalPageNum()) {
              row--;
              return;
            }
            openCurrentTable(row);
          }
        };
    Action prevPage =
        new Action("上一页") {
          public void run() {
            row--;
            if (row < 1) {
              row++;
              return;
            }
            openCurrentTable(row);
          }
        };

    Action refresh =
        new Action("刷新") {
          public void run() {
            getStationInfo();
            openCurrentTable(row);
          }
        };

    // 工具条
    ToolBar toolBar = new ToolBar(buttonComposite, SWT.FLAT | SWT.RIGHT); // |SWT.BORDER

    // 工具条管理器
    ToolBarManager manager = new ToolBarManager(toolBar);

    // manager.add(refresh);
    // manager.add(new Separator());

    manager.add(nextPage);
    manager.add(prevPage);

    manager.add(new Separator());

    manager.add(actionModify);
    manager.add(actionDelete);
    manager.add(actionClear);
    manager.add(new Separator());
    manager.add(actionHelp);
    manager.update(true);

    // 选中某行时,改变行的颜色
    table.addListener(
        SWT.EraseItem,
        new Listener() {
          public void handleEvent(Event event) {
            event.detail &= ~SWT.HOT;
            if ((event.detail & SWT.SELECTED) == 0) return;
            int clientWidth = table.getClientArea().width;
            GC gc = event.gc;
            Color oldForeground = gc.getForeground();
            Color oldBackground = gc.getBackground();
            gc.setForeground(red);
            // gc.setBackground(yellow);
            gc.fillGradientRectangle(0, event.y, clientWidth, event.height, false);
            gc.setForeground(oldForeground);
            gc.setBackground(oldBackground);
            event.detail &= ~SWT.SELECTED;
          }
        });

    // 在tableviewer内部为数据记录和tableItem之间的映射创建一个hash表,这样可以加快tableItem的和记录间的查找速度
    // 必须保证存在要显示的数据,否则程序出错。所以这里不能用下面的语句
    // tableViewer.setUseHashlookup(true);//必须在setInput之前加入才有效
    // 从服务器获取数据
    getStationInfo();
    // 通过setInput为table添加了一个list后,只要对这个list里的元素进行添加和删除,
    // table中的数据就会自动添加和删除,当然每次操作后需要调用refresh方法对tableviewer进行刷新。
    // 打开界面所显示的内容
    tableViewer.setInput(stationData.getData()); // 自动输入数据   即将数据显示在表格中
    tableViewer.setItemCount(stationData.PAGE_SIZE); // 设置显示的Item数
  } //// createComp
  public Shell open(Display display) {

    // Window dressing - the icon
    windowIcon =
        new Image(display, getClass().getClassLoader().getResourceAsStream("icons/joanju.gif"));

    shell = new Shell(display);
    shell.setLayout(new FillLayout());
    shell.addShellListener(
        new ShellAdapter() {
          public void shellClosed(ShellEvent e) {
            e.doit = closeAddressBook();
          }
        });

    shell.setImage(windowIcon);

    createMenuBar();

    searchDialog = new SearchDialog(shell);
    searchDialog.setSearchAreaNames(columnNames);
    searchDialog.setSearchAreaLabel(resMessages.getString("Column"));
    searchDialog.addFindListener(
        new FindListener() {
          public boolean find() {
            return findEntry();
          }
        });

    table = new Table(shell, SWT.SINGLE | SWT.BORDER | SWT.FULL_SELECTION);
    table.setHeaderVisible(true);
    table.setMenu(createPopUpMenu());
    table.addSelectionListener(
        new SelectionAdapter() {
          public void widgetDefaultSelected(SelectionEvent e) {
            TableItem[] items = table.getSelection();
            if (items.length > 0) launchEditor(items[0]);
          }
        });
    int[] widths = {150, 50, 200, 200};
    for (int i = 0; i < columnNames.length; i++) {
      TableColumn column = new TableColumn(table, SWT.NONE);
      column.setText(columnNames[i]);
      column.setWidth(widths[i]);
      final int columnIndex = i;
      column.addSelectionListener(
          new SelectionAdapter() {
            public void widgetSelected(SelectionEvent e) {
              sort(columnIndex);
            }
          });
    }

    newAddressBook();

    shell.addDisposeListener(
        new DisposeListener() {
          public void widgetDisposed(DisposeEvent e) {
            windowIcon.dispose();
          }
        });

    shell.setSize(table.computeSize(SWT.DEFAULT, SWT.DEFAULT).x, 300);
    shell.open();
    return shell;
  }