private static byte[] getKey(
RowKeySchema schema, List<List<KeyRange>> slots, int[] slotSpan, Bound bound) {
if (slots.isEmpty()) {
return KeyRange.UNBOUND;
}
int[] position = new int[slots.size()];
int maxLength = 0;
for (int i = 0; i < position.length; i++) {
position[i] = bound == Bound.LOWER ? 0 : slots.get(i).size() - 1;
KeyRange range = slots.get(i).get(position[i]);
Field field = schema.getField(i + slotSpan[i]);
int keyLength = range.getRange(bound).length;
if (!field.getDataType().isFixedWidth()) {
keyLength++;
if (range.isUnbound(bound)
&& !range.isInclusive(bound)
&& field.getSortOrder() == SortOrder.DESC) {
keyLength++;
}
}
maxLength += keyLength;
}
byte[] key = new byte[maxLength];
int length = setKey(schema, slots, slotSpan, position, bound, key, 0, 0, position.length);
if (length == 0) {
return KeyRange.UNBOUND;
}
if (length == maxLength) {
return key;
}
byte[] keyCopy = new byte[length];
System.arraycopy(key, 0, keyCopy, 0, length);
return keyCopy;
}
/**
* Perform a binary lookup on the list of KeyRange for the tightest slot such that the slotBound
* of the current slot is higher or equal than the slotBound of our range.
*
* @return the index of the slot whose slot bound equals or are the tightest one that is smaller
* than rangeBound of range, or slots.length if no bound can be found.
*/
public static int searchClosestKeyRangeWithUpperHigherThanPtr(
List<KeyRange> slots, ImmutableBytesWritable ptr, int lower, Field field) {
int upper = slots.size() - 1;
int mid;
BytesComparator comparator =
ScanUtil.getComparator(field.getDataType().isFixedWidth(), field.getSortOrder());
while (lower <= upper) {
mid = (lower + upper) / 2;
int cmp = slots.get(mid).compareUpperToLowerBound(ptr, true, comparator);
if (cmp < 0) {
lower = mid + 1;
} else if (cmp > 0) {
upper = mid - 1;
} else {
return mid;
}
}
mid = (lower + upper) / 2;
if (mid == 0 && slots.get(mid).compareUpperToLowerBound(ptr, true, comparator) > 0) {
return mid;
} else {
return ++mid;
}
}
private static TimeRange getRowTimestampColumnRange(
List<List<KeyRange>> ranges, RowKeySchema schema, int rowTimestampColPos) {
try {
if (rowTimestampColPos != -1) {
if (ranges != null && ranges.size() > rowTimestampColPos) {
List<KeyRange> rowTimestampColRange = ranges.get(rowTimestampColPos);
List<KeyRange> sortedRange = new ArrayList<>(rowTimestampColRange);
Collections.sort(sortedRange, KeyRange.COMPARATOR);
// ranges.set(rowTimestampColPos, sortedRange); //TODO: do I really need to do this?
Field f = schema.getField(rowTimestampColPos);
SortOrder order = f.getSortOrder();
KeyRange lowestRange = rowTimestampColRange.get(0);
KeyRange highestRange = rowTimestampColRange.get(rowTimestampColRange.size() - 1);
if (order == SortOrder.DESC) {
return getDescTimeRange(lowestRange, highestRange, f);
}
return getAscTimeRange(lowestRange, highestRange, f);
}
}
} catch (IOException e) {
Throwables.propagate(e);
}
return null;
}
public static BytesComparator getComparator(Field field) {
return getComparator(field.getDataType().isFixedWidth(), field.getSortOrder());
}
public static int setKey(
RowKeySchema schema,
List<List<KeyRange>> slots,
int[] slotSpan,
int[] position,
Bound bound,
byte[] key,
int byteOffset,
int slotStartIndex,
int slotEndIndex,
int schemaStartIndex) {
int offset = byteOffset;
boolean lastInclusiveUpperSingleKey = false;
boolean anyInclusiveUpperRangeKey = false;
// The index used for slots should be incremented by 1,
// but the index for the field it represents in the schema
// should be incremented by 1 + value in the current slotSpan index
// slotSpan stores the number of columns beyond one that the range spans
Field field = null;
int i = slotStartIndex, fieldIndex = ScanUtil.getRowKeyPosition(slotSpan, slotStartIndex);
for (i = slotStartIndex; i < slotEndIndex; i++) {
// Build up the key by appending the bound of each key range
// from the current position of each slot.
KeyRange range = slots.get(i).get(position[i]);
// Use last slot in a multi-span column to determine if fixed width
field = schema.getField(fieldIndex + slotSpan[i]);
boolean isFixedWidth = field.getDataType().isFixedWidth();
fieldIndex += slotSpan[i] + 1;
/*
* If the current slot is unbound then stop if:
* 1) setting the upper bound. There's no value in
* continuing because nothing will be filtered.
* 2) setting the lower bound when the type is fixed length
* for the same reason. However, if the type is variable width
* continue building the key because null values will be filtered
* since our separator byte will be appended and incremented.
*/
if (range.isUnbound(bound) && (bound == Bound.UPPER || isFixedWidth)) {
break;
}
byte[] bytes = range.getRange(bound);
System.arraycopy(bytes, 0, key, offset, bytes.length);
offset += bytes.length;
/*
* We must add a terminator to a variable length key even for the last PK column if
* the lower key is non inclusive or the upper key is inclusive. Otherwise, we'd be
* incrementing the key value itself, and thus bumping it up too much.
*/
boolean inclusiveUpper = range.isInclusive(bound) && bound == Bound.UPPER;
boolean exclusiveLower = !range.isInclusive(bound) && bound == Bound.LOWER;
// If we are setting the upper bound of using inclusive single key, we remember
// to increment the key if we exit the loop after this iteration.
//
// We remember to increment the last slot if we are setting the upper bound with an
// inclusive range key.
//
// We cannot combine the two flags together in case for single-inclusive key followed
// by the range-exclusive key. In that case, we do not need to increment the end at the
// end. But if we combine the two flag, the single inclusive key in the middle of the
// key slots would cause the flag to become true.
lastInclusiveUpperSingleKey = range.isSingleKey() && inclusiveUpper;
anyInclusiveUpperRangeKey |= !range.isSingleKey() && inclusiveUpper;
// A null or empty byte array is always represented as a zero byte
byte sepByte =
SchemaUtil.getSeparatorByte(schema.rowKeyOrderOptimizable(), bytes.length == 0, field);
if (!isFixedWidth
&& (fieldIndex < schema.getMaxFields()
|| inclusiveUpper
|| exclusiveLower
|| sepByte == QueryConstants.DESC_SEPARATOR_BYTE)) {
key[offset++] = sepByte;
// Set lastInclusiveUpperSingleKey back to false if this is the last pk column
// as we don't want to increment the null byte in this case
lastInclusiveUpperSingleKey &= i < schema.getMaxFields() - 1;
}
// If we are setting the lower bound with an exclusive range key, we need to bump the
// slot up for each key part. For an upper bound, we bump up an inclusive key, but
// only after the last key part.
if (exclusiveLower) {
if (!ByteUtil.nextKey(key, offset)) {
// Special case for not being able to increment.
// In this case we return a negative byteOffset to
// remove this part from the key being formed. Since the
// key has overflowed, this means that we should not
// have an end key specified.
return -byteOffset;
}
// We're filtering on values being non null here, but we still need the 0xFF
// terminator, since DESC keys ignore the last byte as it's expected to be
// the terminator. Without this, we'd ignore the separator byte that was
// just added and incremented.
if (!isFixedWidth
&& bytes.length == 0
&& SchemaUtil.getSeparatorByte(schema.rowKeyOrderOptimizable(), false, field)
== QueryConstants.DESC_SEPARATOR_BYTE) {
key[offset++] = QueryConstants.DESC_SEPARATOR_BYTE;
}
}
}
if (lastInclusiveUpperSingleKey || anyInclusiveUpperRangeKey) {
if (!ByteUtil.nextKey(key, offset)) {
// Special case for not being able to increment.
// In this case we return a negative byteOffset to
// remove this part from the key being formed. Since the
// key has overflowed, this means that we should not
// have an end key specified.
return -byteOffset;
}
}
// Remove trailing separator bytes, since the columns may have been added
// after the table has data, in which case there won't be a separator
// byte.
if (bound == Bound.LOWER) {
while (--i >= schemaStartIndex
&& offset > byteOffset
&& !(field = schema.getField(--fieldIndex)).getDataType().isFixedWidth()
&& field.getSortOrder() == SortOrder.ASC
&& key[offset - 1] == QueryConstants.SEPARATOR_BYTE) {
offset--;
fieldIndex -= slotSpan[i];
}
}
return offset - byteOffset;
}
public static byte getSeparatorByte(
boolean rowKeyOrderOptimizable, boolean isNullValue, Field f) {
return getSeparatorByte(rowKeyOrderOptimizable, isNullValue, f.getSortOrder());
}