Пример #1
0
  /**
   * {@inheritDoc}
   *
   * <p>This is called by the Generic ResolverServiceImpl when processing a response to a query.
   */
  public void processResponse(ResolverResponseMsg response) {

    if (!useRouteResolver) { // Route resolver disabled
      return;
    }

    if (LOG.isEnabledFor(Level.DEBUG)) {
      LOG.debug("processResponse got a response");
    }

    // convert the response into a RouteResponse
    Reader ip = null;
    RouteResponse doc = null;

    try {
      ip = new StringReader(response.getResponse());

      StructuredTextDocument asDoc =
          (StructuredTextDocument)
              StructuredDocumentFactory.newStructuredDocument(MimeMediaType.XMLUTF8, ip);

      doc = new RouteResponse(asDoc);
    } catch (Throwable e) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("processResponse: malformed response - discard", e);
      }
      return;
    } finally {
      try {
        if (null != ip) {
          ip.close();
          ip = null;
        }
      } catch (Throwable ignored) {
      }
    }

    RouteAdvertisement dstRoute = doc.getDestRoute();
    RouteAdvertisement srcRoute = doc.getSrcRoute();
    int queryId = response.getQueryId();

    if ((dstRoute == null) || (srcRoute == null)) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("processResponse: malformed response - discard.");
      }
      // Malformed response. Just discard.
      return;
    }

    EndpointAddress routingPeer = router.pid2addr(srcRoute.getDestPeerID());
    EndpointAddress destPeer = router.pid2addr(dstRoute.getDestPeerID());

    if ((routingPeer == null) || (destPeer == null)) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("processResponse: malformed PeerID in response - discard.");
      }
      // Malformed response. Just discard.
      return;
    }

    // check if we have a negative route response
    if (queryId == NACKROUTE_QUERYID) {

      AccessPointAdvertisement badHop = dstRoute.nextHop(router.addr2pid(routingPeer));

      PeerID badPeer = null;

      if (badHop != null) {
        badPeer = badHop.getPeerID();
      } else { // the bad hop is the final destination
        badPeer = dstRoute.getDestPeerID();
      }

      processBadRoute(badPeer, dstRoute);
      return;
    }

    // This is not our own peer adv, so we must not keep it
    // for more than its expiration time.
    // we only need to publish this route if
    // we don't know about it yet
    // XXX: here is where we could be more conservative and use isNormallyReachable() instead, thus
    // excluding
    // incoming messengers.
    if ((!router.isLocalRoute(router.pid2addr(srcRoute.getDestPeerID())))
        && (!router.isRoutedRoute(router.pid2addr(srcRoute.getDestPeerID())))) {
      router.updateRouteAdv(srcRoute);
    }

    if (destPeer.equals(routingPeer)) {
      // The dest peer itself managed to respond to us. That means we
      // learned the route from the reverseRoute in the message
      // itself. So, there's nothing we need to do.
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("learn route directly from the destination");
      }
    } else {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("learn route:" + routingPeer);
      }

      try {
        // build the candidate route using the
        // route response from the respondant peer
        RouteAdvertisement candidateRoute =
            RouteAdvertisement.newRoute(
                router.addr2pid(destPeer),
                router.addr2pid(routingPeer),
                (Vector) dstRoute.getVectorHops().clone());

        // cleanup the candidate route from any loop and remove the local peer extra
        // cycle
        RouteAdvertisement.cleanupLoop(candidateRoute, (PeerID) localPeerId);

        // Is there anything left in that route (or did the respondant
        // believe that we are the last hop on the route - which
        // obviously we are not.
        if (candidateRoute.size() == 0) {
          if (LOG.isEnabledFor(Level.DEBUG)) {
            LOG.debug("Route response outdated: NACK responder");
          }
          generateNACKRoute(
              router.addr2pid(routingPeer), router.addr2pid(destPeer), dstRoute.getVectorHops());
          return;
        }

        // get the address of the first hop in the route to verify that
        // we have a route (direct or long) to the first hop, so the route
        // is valid
        EndpointAddress candidateRouter = router.pid2addr(candidateRoute.getFirstHop().getPeerID());

        // check that we have a direct connection to the first hop
        if (router.ensureLocalRoute(candidateRouter, null) == null) {
          // If we do not have a direct route to the candidate router check
          // for a long route in that case stich the route
          RouteAdvertisement routeToRouter = router.getRoute(candidateRouter, false);

          if (routeToRouter == null) {
            if (LOG.isEnabledFor(Level.DEBUG)) {
              LOG.debug("Route response useless: no route to next router hop");
            }
            return;
          }

          // stich the route removing any loops and localPeer cycle
          if (RouteAdvertisement.stichRoute(candidateRoute, routeToRouter, (PeerID) localPeerId)) {
            router.setRoute(candidateRoute, false);
          } else {
            if (LOG.isEnabledFor(Level.DEBUG)) {
              LOG.debug("Route response error stiching route response");
            }
            return;
          }
        } else {
          // we have a direct connection with the first hop of the candidate route
          // set the new route, which starts with the peer that replied to us.
          router.setRoute(candidateRoute, false);
        }
      } catch (Exception ex) {
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("Route response exception when building response route" + ex);
          LOG.debug("               bad dstRoute: " + dstRoute.display());
        }
      }

      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("finish process route response successfully");
      }
    }
  }
Пример #2
0
  /**
   * Process the Query, and generate response
   *
   * @param query the query to process
   */
  public int processQuery(ResolverQueryMsg query) {

    if (!useRouteResolver) { // Route resolver disabled
      return ResolverService.OK;
    }

    if (LOG.isEnabledFor(Level.DEBUG)) {
      LOG.debug("processQuery starts");
    }

    RouteQuery routeQuery = null;
    Reader ip = null;

    try {
      ip = new StringReader(query.getQuery());

      StructuredTextDocument asDoc =
          (StructuredTextDocument)
              StructuredDocumentFactory.newStructuredDocument(MimeMediaType.XMLUTF8, ip);

      routeQuery = new RouteQuery(asDoc);

    } catch (Throwable e) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("Malformed Route query ", e);
      }
      return ResolverService.OK;
    } finally {
      try {
        if (null != ip) {
          ip.close();
          ip = null;
        }
      } catch (Throwable ignored) {;
      }
    }

    PeerID pId = routeQuery.getDestPeerID();

    if (LOG.isEnabledFor(Level.DEBUG)) {
      LOG.debug("processQuery: looking for route to " + pId);
    }

    RouteAdvertisement srcRoute = routeQuery.getSrcRoute();
    List badHops = routeQuery.getBadHops();

    if (LOG.isEnabledFor(Level.DEBUG)) {
      if (badHops != null) {
        LOG.debug("processQuery: bad Hops");
        for (int i = 0; i < badHops.size(); i++) {
          LOG.debug("processQuery:   :" + ((PeerID) badHops.get(i)).toString());
        }
      }
    }
    // if our source route is not null, then publish it
    if (srcRoute != null) {
      if (!(srcRoute.getDestPeerID()).equals(localPeerId)) {
        // This is not our own peer adv so we must not keep it
        // longer than its expiration time.
        try {
          if (LOG.isEnabledFor(Level.DEBUG)) {
            LOG.debug("processQuery: publishing sender route info " + srcRoute.getDestPeerID());
          }

          // we only need to publish this route if
          // we don't know about it yet
          // XXX: here is where we could be more conservative and use isNormallyReachable() instead,
          // thus excluding
          // incoming messengers.
          if ((!router.isLocalRoute(router.pid2addr(srcRoute.getDestPeerID())))
              && (!router.isRoutedRoute(router.pid2addr(srcRoute.getDestPeerID())))) {
            routeCM.publishRoute(srcRoute);
          }
        } catch (Exception e) {
          if (LOG.isEnabledFor(Level.DEBUG)) {
            LOG.debug("Could not publish Route Adv from query - discard", e);
          }
          return ResolverService.OK;
        }
      }
    } else {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("No src Route in route query - discard ");
      }
      return ResolverService.OK;
    }

    if (pId == null) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("Malformed route query request, no PeerId - discard");
      }
      return ResolverService.OK;
    }

    // We have more luck with that one because, since it is part of OUR
    // message, and not part of the resolver protocol, it is in OUR
    // format.
    EndpointAddress qReqAddr = router.pid2addr(pId);

    RouteAdvertisement route = null;

    // check if this peer has a route to the destination
    // requested
    boolean found = false;

    if (qReqAddr.equals(localPeerAddr)) {
      found = true;
      // return the route that is my local route
      route = router.getMyLocalRoute();
    } else {
      // only rendezvous can respond to route requests
      // if not we are generating too much traffic
      // XXX: here is where we could be more conservative and use isNormallyReachable() instead,
      // thus excluding
      // incoming messengers.
      if (router.isLocalRoute(qReqAddr)) {
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("processQuery: peer has direct route to destination ");
        }
        // we should set the route to something  :-)

        found = true;

        // this peer has a direct route to the destination
        // return the short route advertisement we know for this peer
        // (For us it is zero hop, and we advertise ourself as the routing
        // peer in the response. The stiching is done by whoever gets that
        // response). May be there are more than one hop advertised in-there...
        // alternate routing peers...should we leave them ?
        // For now, we keep the full dest, but wack the hops.

        route =
            (RouteAdvertisement)
                AdvertisementFactory.newAdvertisement(RouteAdvertisement.getAdvertisementType());

        AccessPointAdvertisement ap =
            (AccessPointAdvertisement)
                AdvertisementFactory.newAdvertisement(
                    AccessPointAdvertisement.getAdvertisementType());

        ap.setPeerID(pId);
        route.setDest(ap);

      } else {

        route = router.getRoute(qReqAddr, false);
        if (route != null) {
          found = true;
          // check if we were given some bad hops info
          // and see if the found route contains
          // any of these bad hops. In that case, we need
          // to mark this route as bad
          for (int i = 0; i < badHops.size(); i++) {

            // destination is known to be bad
            if (router.addr2pid(qReqAddr).equals(((PeerID) badHops.get(i)))) {
              processBadRoute((PeerID) badHops.get(i), route);
              found = false;
              break;
            }

            if (route.containsHop((PeerID) badHops.get(i))) {
              if (LOG.isEnabledFor(Level.DEBUG)) {
                LOG.debug(
                    "processQuery: peer has bad route due to "
                        + ((PeerID) badHops.get(i)).toString());
              }
              processBadRoute((PeerID) badHops.get(i), route);
              found = false;
              break;
            }
          }
        }
      }
    }

    if (!found) {
      // discard the request if we are not a rendezvous
      // else forward to the next peers
      if (!group.isRendezvous()) {
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("discard query forwarding as not a rendezvous");
        }
        return ResolverService.OK;
      }

      // did not find a route, check our srdi cache
      // make sure we protect against out of sync
      // SRDI index

      // srdi forwarding is only involved once the Index entry has
      // been found and we forwarded the resolver query. Afterward a
      // normal walk proceeds from the initial SRDI index pointing
      // rdv. This is done to protect against potential loopback
      // entries in the SRDI cache index due to out of sync peerview
      // and index.
      if (query.getHopCount() < 2) {

        // check local SRDI cache to see if we have the entry
        // we look for 10 entries, will pickup one randomly
        Vector results = srdiIndex.query("route", "DstPID", pId.toString(), 10);

        if (results.size() > 0) {
          if (LOG.isEnabledFor(Level.DEBUG)) {
            LOG.debug("processQuery srdiIndex lookup match :" + results.size());
          }

          // remove any non-rdv peers to avoid sending
          // to a non-rdv peers and garbage collect the SRDI
          // index in the process
          Vector clean = cleanupAnyEdges(query.getSrc(), results);

          if (clean.size() > 0) {

            if (LOG.isEnabledFor(Level.DEBUG)) {
              LOG.debug("found an srdi entry forwarding query to SRDI peer");
            }

            // The purpose of incrementing the hopcount
            // when an SRDI index match is found (we got a
            // pointer to a rdv that should have the route) is to
            // restrict any further forwarding. The increment
            // count is only done when a matching SRDI index is
            // found. Not when the replica is selected as we
            // still need to forward the query.  This restriction
            // is purposelly done to avoid too many longjumps
            // within a walk.
            query.incrementHopCount();

            // Note: this forwards the query to 1 peer randomly
            // selected from the result
            srdi.forwardQuery(clean, query, 1);

            // tell the resolver no further action is needed.
            return ResolverService.OK;
          }
        }
      }

      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("did not find a route or SRDI index");
      }

      // force a walk
      return ResolverService.Repropagate;
    }

    // we found a route send the response
    try {
      if (route == null) {
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("we should have had a route at this point");
        }
        return ResolverService.OK;
      }

      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("processQuery: we have a route build route response" + route.display());
      }

      RouteAdvertisement myRoute = router.getMyLocalRoute();

      // make sure we initialized our local
      // route info as we will need it to respond. We may
      // not have our route if we are still
      // waiting for a relay connection.
      if (myRoute == null) {
        return ResolverService.OK;
      }

      RouteResponse routeResponse = new RouteResponse();

      routeResponse.setDestRoute(route);
      routeResponse.setSrcRoute(myRoute);

      if (routeResponse == null) {
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("error creating route response");
        }
        return ResolverService.OK;
      }

      // construct a response from the query
      ResolverResponseMsg res = query.makeResponse();

      res.setCredential(credentialDoc);
      res.setResponse(routeResponse.toString());

      resolver.sendResponse(query.getSrc(), res);
      return ResolverService.OK;

    } catch (Exception ee) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("processQuery: error while processing query ", ee);
      }
      return ResolverService.OK;
    }
  }
Пример #3
0
  /**
   * Return a route error in case a route was found to be invalid as the current hop cannot find a
   * way to forward the message to the destination or any other hops in the forward part of the
   * route. In that case a negative route response is forwarded to the orginal source of the
   * message. Now of course we do not have any way to guarantee that the NACK message will be
   * received by the sender, but the best we can do is to try :-)
   *
   * <p>we send a query ID to NACKROUTE_QUERYID to indicate this is a bad Route
   *
   * @param src original source of the message
   * @param dest original destination of the message
   */
  protected void generateNACKRoute(PeerID src, PeerID dest, Vector origHops) {

    // As long as the group is partially initialized, do not bother
    // trying to send NACKS. We can't: it just causes NPEs.
    if (resolver == null) {
      return;
    }

    if (LOG.isEnabledFor(Level.DEBUG)) {
      LOG.debug("generate NACK Route response " + src);
    }

    // check first, if we are not already in process of looking for a
    // route to the destination peer of the NACK. We should not try to
    // send a NACK to that destination at that point as this will block
    // our incoming processing thread while it is looking for a route to
    // that destination. If there a no pending route requests to that
    // destination then we can go ahead an attempt to send the NACK. At
    // the maximum we should have only one thread block while looking for
    // a specific destination. When we find a route to the destination,
    // the next NACK processing will be sent.

    if (router.isPendingRouteQuery(router.pid2addr(src))) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("drop NACK due to pending route discovery " + src);
      }
      return;
    }

    // Generate a route response
    RouteAdvertisement route =
        (RouteAdvertisement)
            AdvertisementFactory.newAdvertisement(RouteAdvertisement.getAdvertisementType());

    AccessPointAdvertisement ap =
        (AccessPointAdvertisement)
            AdvertisementFactory.newAdvertisement(AccessPointAdvertisement.getAdvertisementType());

    ap.setPeerID(dest);
    route.setDest(ap);
    route.setHops(origHops);

    // set the the route of the peer that
    // detected the bad route
    RouteAdvertisement routeSrc =
        (RouteAdvertisement)
            AdvertisementFactory.newAdvertisement(RouteAdvertisement.getAdvertisementType());

    AccessPointAdvertisement apSrc =
        (AccessPointAdvertisement)
            AdvertisementFactory.newAdvertisement(AccessPointAdvertisement.getAdvertisementType());

    apSrc.setPeerID((PeerID) localPeerId);
    routeSrc.setDest(apSrc);

    RouteResponse routeResponse = new RouteResponse();

    routeResponse.setDestRoute(route);
    routeResponse.setSrcRoute(routeSrc);

    if (routeResponse == null) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("error creating route NACKresponse");
      }
      return;
    }

    ResolverResponse res =
        new ResolverResponse(
            routerSName,
            credentialDoc,
            NACKROUTE_QUERYID, // mean NACKRoute
            routeResponse.toString());

    // send the NACK response back to the originator
    resolver.sendResponse(src.toString(), res);
  }