/*
* Read the channel for more information, then unwrap the
* (hopefully application) data we get.
* <P>
* If we run out of data, we'll return to our caller (possibly using
* a Selector) to get notification that more is available.
* <P>
* Each call to this method will perform at most one underlying read().
*/
int read() throws IOException {
SSLEngineResult result;
if (!initialHSComplete) {
throw new IllegalStateException();
}
int pos = requestBB.position();
if (sc.read(inNetBB) == -1) {
sslEngine.closeInbound(); // probably throws exception
return -1;
}
do {
resizeRequestBB(); // expected room for unwrap
inNetBB.flip();
result = sslEngine.unwrap(inNetBB, requestBB);
inNetBB.compact();
/*
* Could check here for a renegotation, but we're only
* doing a simple read/write, and won't have enough state
* transitions to do a complete handshake, so ignore that
* possibility.
*/
switch (result.getStatus()) {
case BUFFER_OVERFLOW:
// Reset the application buffer size.
appBBSize = sslEngine.getSession().getApplicationBufferSize();
break;
case BUFFER_UNDERFLOW:
// Resize buffer if needed.
netBBSize = sslEngine.getSession().getPacketBufferSize();
if (netBBSize > inNetBB.capacity()) {
resizeResponseBB();
break; // break, next read will support larger buffer.
}
case OK:
if (result.getHandshakeStatus() == HandshakeStatus.NEED_TASK) {
doTasks();
}
break;
default:
throw new IOException("sslEngine error during data read: " + result.getStatus());
}
} while ((inNetBB.position() != 0) && result.getStatus() != Status.BUFFER_UNDERFLOW);
return (requestBB.position() - pos);
}
private static void log(String str, SSLEngineResult result) {
if (!logging) {
return;
}
if (resultOnce) {
resultOnce = false;
System.out.println(
"The format of the SSLEngineResult is: \n"
+ "\t\"getStatus() / getHandshakeStatus()\" +\n"
+ "\t\"bytesConsumed() / bytesProduced()\"\n");
}
HandshakeStatus hsStatus = result.getHandshakeStatus();
log(
str
+ result.getStatus()
+ "/"
+ hsStatus
+ ", "
+ result.bytesConsumed()
+ "/"
+ result.bytesProduced()
+ " bytes");
if (hsStatus == HandshakeStatus.FINISHED) {
log("\t...ready for application data");
}
}
/*
* Begin the shutdown process.
* <P>
* Close out the SSLEngine if not already done so, then
* wrap our outgoing close_notify message and try to send it on.
* <P>
* Return true when we're done passing the shutdown messsages.
*/
boolean shutdown() throws IOException {
if (!shutdown) {
sslEngine.closeOutbound();
shutdown = true;
}
if (outNetBB.hasRemaining() && tryFlush(outNetBB)) {
return false;
}
/*
* By RFC 2616, we can "fire and forget" our close_notify
* message, so that's what we'll do here.
*/
outNetBB.clear();
SSLEngineResult result = sslEngine.wrap(hsBB, outNetBB);
if (result.getStatus() != Status.CLOSED) {
throw new SSLException("Improper close state");
}
outNetBB.flip();
/*
* We won't wait for a select here, but if this doesn't work,
* we'll cycle back through on the next select.
*/
if (outNetBB.hasRemaining()) {
tryFlush(outNetBB);
}
return (!outNetBB.hasRemaining() && (result.getHandshakeStatus() != HandshakeStatus.NEED_WRAP));
}
/*
* Try to flush out any existing outbound data, then try to wrap
* anything new contained in the src buffer.
* <P>
* Return the number of bytes actually consumed from the buffer,
* but the data may actually be still sitting in the output buffer,
* waiting to be flushed.
*/
private int doWrite(ByteBuffer src) throws IOException {
int retValue = 0;
if (outNetBB.hasRemaining() && !tryFlush(outNetBB)) {
return retValue;
}
/*
* The data buffer is empty, we can reuse the entire buffer.
*/
outNetBB.clear();
SSLEngineResult result = sslEngine.wrap(src, outNetBB);
retValue = result.bytesConsumed();
outNetBB.flip();
switch (result.getStatus()) {
case OK:
if (result.getHandshakeStatus() == HandshakeStatus.NEED_TASK) {
doTasks();
}
break;
default:
throw new IOException("sslEngine error during data write: " + result.getStatus());
}
/*
* Try to flush the data, regardless of whether or not
* it's been selected. Odds of a write buffer being full
* is less than a read buffer being empty.
*/
if (outNetBB.hasRemaining()) {
tryFlush(outNetBB);
}
return retValue;
}
/*
* Perform any handshaking processing.
* <P>
* If a SelectionKey is passed, register for selectable
* operations.
* <P>
* In the blocking case, our caller will keep calling us until
* we finish the handshake. Our reads/writes will block as expected.
* <P>
* In the non-blocking case, we just received the selection notification
* that this channel is ready for whatever the operation is, so give
* it a try.
* <P>
* return:
* true when handshake is done.
* false while handshake is in progress
*/
boolean doHandshake(SelectionKey sk) throws IOException {
SSLEngineResult result;
if (initialHSComplete) {
return initialHSComplete;
}
/*
* Flush out the outgoing buffer, if there's anything left in
* it.
*/
if (outNetBB.hasRemaining()) {
if (!tryFlush(outNetBB)) {
return false;
}
// See if we need to switch from write to read mode.
switch (initialHSStatus) {
/*
* Is this the last buffer?
*/
case FINISHED:
initialHSComplete = true;
// Fall-through to reregister need for a Read.
case NEED_UNWRAP:
if (sk != null) {
sk.interestOps(SelectionKey.OP_READ);
}
break;
}
return initialHSComplete;
}
switch (initialHSStatus) {
case NEED_UNWRAP:
if (sc.read(inNetBB) == -1) {
sslEngine.closeInbound();
return initialHSComplete;
}
needIO:
while (initialHSStatus == HandshakeStatus.NEED_UNWRAP) {
resizeRequestBB(); // expected room for unwrap
inNetBB.flip();
result = sslEngine.unwrap(inNetBB, requestBB);
inNetBB.compact();
initialHSStatus = result.getHandshakeStatus();
switch (result.getStatus()) {
case OK:
switch (initialHSStatus) {
case NOT_HANDSHAKING:
throw new IOException("Not handshaking during initial handshake");
case NEED_TASK:
initialHSStatus = doTasks();
break;
case FINISHED:
initialHSComplete = true;
break needIO;
}
break;
case BUFFER_UNDERFLOW:
// Resize buffer if needed.
netBBSize = sslEngine.getSession().getPacketBufferSize();
if (netBBSize > inNetBB.capacity()) {
resizeResponseBB();
}
/*
* Need to go reread the Channel for more data.
*/
if (sk != null) {
sk.interestOps(SelectionKey.OP_READ);
}
break needIO;
case BUFFER_OVERFLOW:
// Reset the application buffer size.
appBBSize = sslEngine.getSession().getApplicationBufferSize();
break;
default: // CLOSED:
throw new IOException("Received" + result.getStatus() + "during initial handshaking");
}
} // "needIO" block.
/*
* Just transitioned from read to write.
*/
if (initialHSStatus != HandshakeStatus.NEED_WRAP) {
break;
}
// Fall through and fill the write buffers.
case NEED_WRAP:
/*
* The flush above guarantees the out buffer to be empty
*/
outNetBB.clear();
result = sslEngine.wrap(hsBB, outNetBB);
outNetBB.flip();
initialHSStatus = result.getHandshakeStatus();
switch (result.getStatus()) {
case OK:
if (initialHSStatus == HandshakeStatus.NEED_TASK) {
initialHSStatus = doTasks();
}
if (sk != null) {
sk.interestOps(SelectionKey.OP_WRITE);
}
break;
default: // BUFFER_OVERFLOW/BUFFER_UNDERFLOW/CLOSED:
throw new IOException("Received" + result.getStatus() + "during initial handshaking");
}
break;
default: // NOT_HANDSHAKING/NEED_TASK/FINISHED
throw new RuntimeException("Invalid Handshaking State" + initialHSStatus);
} // switch
return initialHSComplete;
}