Пример #1
0
  public boolean beadCalibration3d() {
    imp = IJ.getImage();
    if (imp == null) {
      IJ.noImage();
      return false;
    } else if (imp.getStackSize() == 1) {
      IJ.error("Stack required");
      return false;
    } else if (imp.getType() != ImagePlus.GRAY8 && imp.getType() != ImagePlus.GRAY16) {
      // In order to support 32bit images, pict[] must be changed to float[], and  getPixel(x, y);
      // requires a Float.intBitsToFloat() conversion
      IJ.error("8 or 16 bit greyscale image required");
      return false;
    }
    width = imp.getWidth();
    height = imp.getHeight();
    nslices = imp.getStackSize();
    imtitle = imp.getTitle();

    models[0] = "*None*";
    models[1] = "line";
    models[2] = "2nd degree polynomial";
    models[3] = "3rd degree polynomial";
    models[4] = "4th degree polynomial";

    GenericDialog gd = new GenericDialog("3D PALM calibration");
    gd.addNumericField("Maximum FWHM (in px)", prefs.get("QuickPALM.3Dcal_fwhm", 20), 0);
    gd.addNumericField(
        "Particle local threshold (% maximum intensity)", prefs.get("QuickPALM.pthrsh", 20), 0);
    gd.addNumericField("Z-spacing (nm)", prefs.get("QuickPALM.z-step", 10), 2);
    gd.addNumericField("Calibration Z-smoothing (radius)", prefs.get("QuickPALM.window", 1), 0);
    gd.addChoice("Model", models, prefs.get("QuickPALM.model", models[3]));
    gd.addCheckbox(
        "Show divergence of bead positions against model",
        prefs.get("QuickPALM.3Dcal_showDivergence", false));
    gd.addCheckbox("Show extra particle info", prefs.get("QuickPALM.3Dcal_showExtraInfo", false));
    gd.addMessage("\n\nDon't forget to save the table in the end...");
    gd.showDialog();
    if (gd.wasCanceled()) return false;
    fwhm = gd.getNextNumber();
    prefs.set("QuickPALM.QuickPALM.3Dcal_fwhm", fwhm);
    pthrsh = gd.getNextNumber() / 100;
    prefs.set("QuickPALM.pthrsh", pthrsh * 100);
    cal_z = gd.getNextNumber();
    prefs.set("QuickPALM.z-step", cal_z);
    window = (int) gd.getNextNumber();
    prefs.set("QuickPALM.window", window);
    model = gd.getNextChoice();
    prefs.set("QuickPALM.model", model);
    part_divergence = gd.getNextBoolean();
    prefs.set("QuickPALM.3Dcal_showDivergence", part_divergence);
    part_extrainfo = gd.getNextBoolean();
    prefs.set("QuickPALM.3Dcal_showExtraInfo", part_extrainfo);
    return true;
  }
 public void run(String arg) {
   GenericDialog gd = new GenericDialog("Options");
   gd.addCheckbox("Add_Titles", true);
   gd.addCheckbox("Close Original", false);
   gd.showDialog();
   if (gd.wasCanceled()) {
     return;
   }
   boolean addtitles = gd.getNextBoolean();
   boolean closeorig = gd.getNextBoolean();
   // first get the table window
   Frame[] niframes = WindowManager.getNonImageWindows();
   boolean first = true;
   TextWindow tw2 = null;
   int ncols = 0;
   String[] col_labels = null;
   for (int i = 0; i < niframes.length; i++) {
     if (niframes[i] instanceof TextWindow && !niframes[i].getTitle().equals("Log")) {
       TextWindow tw = (TextWindow) niframes[i];
       TextPanel tp = tw.getTextPanel();
       List<List<String>> listtable = table_tools.table2listtable(tp);
       if (listtable.size() == 0) {
         col_labels = table_tools.getcollabels(tp);
         ncols = col_labels.length;
         ArrayList<String> temp = new ArrayList<String>();
         for (int j = 0; j < ncols; j++) temp.add("");
         listtable.add(temp);
       }
       if (first) {
         col_labels = table_tools.getcollabels(tp);
         ncols = col_labels.length;
         String headings = tp.getColumnHeadings();
         if (addtitles) {
           String[] titles = repeated(tw.getTitle(), listtable.size());
           table_tools.add_listtable_column(listtable, titles, 0);
           headings = "name\t" + headings;
         }
         tw2 =
             new TextWindow(
                 "Combined Table", headings, table_tools.print_listtable(listtable), 400, 200);
         first = false;
       } else {
         if (addtitles) {
           String[] titles = repeated(tw.getTitle(), listtable.size());
           table_tools.add_listtable_column(listtable, titles, 0);
         }
         tw2.append(table_tools.print_listtable(listtable));
       }
       if (closeorig) tw.close();
     }
   }
 }
Пример #3
0
 void showDialog() {
   int width = imp.getWidth();
   int height = imp.getHeight();
   Calibration cal = imp.getCalibration();
   int places;
   if (cal.scaled()) {
     pixelWidth = cal.pixelWidth;
     pixelHeight = cal.pixelHeight;
     units = cal.getUnits();
     places = 2;
   } else {
     pixelWidth = 1.0;
     pixelHeight = 1.0;
     units = "pixels";
     places = 0;
   }
   if (areaPerPoint == 0.0)
     areaPerPoint =
         (width * cal.pixelWidth * height * cal.pixelHeight) / 81.0; // default to 9x9 grid
   ImageWindow win = imp.getWindow();
   GenericDialog gd = new GenericDialog("Grid...");
   gd.addChoice("Grid Type:", types, type);
   gd.addNumericField("Area per Point:", areaPerPoint, places, 6, units + "^2");
   gd.addChoice("Color:", colors, color);
   gd.addCheckbox("Random Offset", randomOffset);
   gd.addDialogListener(this);
   gd.showDialog();
   if (gd.wasCanceled()) showGrid(null);
 }
Пример #4
0
  public void run(String arg) {
    int[] wList = WindowManager.getIDList();
    if (wList == null) {
      IJ.error("No images are open.");
      return;
    }

    double thalf = 0.5;
    boolean keep;

    GenericDialog gd = new GenericDialog("Bleach correction");

    gd.addNumericField("t½:", thalf, 1);
    gd.addCheckbox("Keep source stack:", true);
    gd.showDialog();
    if (gd.wasCanceled()) return;

    long start = System.currentTimeMillis();
    thalf = gd.getNextNumber();
    keep = gd.getNextBoolean();
    if (keep) IJ.run("Duplicate...", "title='Bleach corrected' duplicate");
    ImagePlus imp1 = WindowManager.getCurrentImage();
    int d1 = imp1.getStackSize();
    double v1, v2;
    int width = imp1.getWidth();
    int height = imp1.getHeight();
    ImageProcessor ip1, ip2, ip3;

    int slices = imp1.getStackSize();
    ImageStack stack1 = imp1.getStack();
    ImageStack stack2 = imp1.getStack();
    int currentSlice = imp1.getCurrentSlice();

    for (int n = 1; n <= slices; n++) {
      ip1 = stack1.getProcessor(n);
      ip3 = stack1.getProcessor(1);
      ip2 = stack2.getProcessor(n);
      for (int x = 0; x < width; x++) {
        for (int y = 0; y < height; y++) {
          v1 = ip1.getPixelValue(x, y);
          v2 = ip3.getPixelValue(x, y);

          // =B8/(EXP(-C$7*A8))
          v1 = (v1 / Math.exp(-n * thalf));
          ip2.putPixelValue(x, y, v1);
        }
      }
      IJ.showProgress((double) n / slices);
      IJ.showStatus(n + "/" + slices);
    }

    // stack2.show();
    imp1.updateAndDraw();
  }
 boolean showoptions(double[] params, int[] fixes) {
   // GenericDialog gd=new NonBlockingGenericDialog("Options");
   GenericDialog gd = new GenericDialog("Options");
   gd.addCheckbox("Check Chi Squared", checkc2);
   for (int i = 0; i < 10; i++) {
     gd.addNumericField("P" + (i + 1), params[i], 5, 10, null);
     gd.addCheckbox("Fix?", (fixes[i] == 1));
   }
   gd.addCheckbox("Get_Errors", false);
   gd.addCheckbox("Set_Constraints", false);
   gd.addNumericField("Iterations", iterations, 0, 10, null);
   gd.addNumericField("chi squared", c2, 5, 10, null);
   gd.addDialogListener(this);
   gd.showDialog();
   if (gd.wasCanceled()) {
     return false;
   }
   checkc2 = gd.getNextBoolean();
   for (int i = 0; i < 10; i++) {
     params[i] = gd.getNextNumber();
     if (gd.getNextBoolean()) {
       fixes[i] = 1;
     } else {
       fixes[i] = 0;
     }
   }
   boolean geterrors = gd.getNextBoolean();
   boolean setconstraints = gd.getNextBoolean();
   for (int i = 0; i < 10; i++) {
     if (function.indexOf("P" + (i + 1)) < 0) {
       fixes[i] = 1;
     }
   }
   if (geterrors) {
     if (!get_errors(params, fixes)) {
       return false;
     }
   }
   if (setconstraints) constraints = get_constraints(params);
   return true;
 }
 boolean init_functions() {
   GenericDialog gd = new GenericDialog("Fitting Options");
   gd.addStringField("Extra Definitions", exdef, 50);
   gd.addCheckbox("Weight Using Plot Errors", false);
   gd.addStringField("Weighting Equation (y is for data)", weightfunction, 50);
   gd.addStringField("Fit_Equation", function, 50);
   gd.showDialog();
   if (gd.wasCanceled()) {
     return false;
   }
   exdef = gd.getNextString();
   boolean errweights = gd.getNextBoolean();
   weightfunction = gd.getNextString();
   function = gd.getNextString();
   // first initialize the weights
   weights = new float[tempdata.length];
   if (errweights
       || weightfunction.equals("")
       || weightfunction == null
       || weightfunction == "1.0") {
     if (errweights) {
       for (int i = 0; i < tempdata.length; i++) weights[i] = 1.0f / (errs[i] * errs[i]);
     } else {
       for (int i = 0; i < tempdata.length; i++) weights[i] = 1.0f;
     }
   } else {
     for (int i = 0; i < tempdata.length; i++) {
       String script =
           "y =" + tempdata[i] + "; " + "x =" + tempx[i] + "; " + "retval=" + weightfunction + ";";
       Double temp = new Double(0.0);
       try {
         temp = (Double) engine.eval(script);
       } catch (Exception e) {
         IJ.log(e.getMessage());
       }
       if (!(temp.isInfinite() || temp.isNaN())) {
         weights[i] = temp.floatValue();
       }
     }
   }
   // now compile the function script
   try {
     String script1 = exdef + "; retval=" + function + ";";
     cs = ce.compile(script1);
   } catch (Exception e) {
     IJ.log(e.toString());
     return false;
   }
   return true;
 }
Пример #7
0
  public void run(String arg) {
    GenericDialog gd = new GenericDialog("Options");
    double sfreq = 20000.0;
    gd.addNumericField("Sampling Frequency?", sfreq, 1, 10, null);
    String[] psfchoice = {"3D Gaussian", "Gaus-Lorentz^2", "2D Gaussian"};
    gd.addChoice("PSF Type?", psfchoice, psfchoice[0]);
    String[] filetypechoice = {
      "Confocor 3 raw", "Short binary trajectory", "PlotWindow trajectory", "Ascii Text File"
    };
    gd.addChoice("File Type?", filetypechoice, filetypechoice[0]);
    boolean ch2green = true;
    gd.addCheckbox("Ch2 is green?", ch2green);
    gd.showDialog();
    if (gd.wasCanceled()) {
      return;
    }
    sfreq = gd.getNextNumber();
    int psfflag = gd.getNextChoiceIndex();
    int fileflag = gd.getNextChoiceIndex();
    ch2green = gd.getNextBoolean();
    int nfiles = 0;
    Object[] histograms = null;
    int xmax = 0;
    int ymax = 0;
    String[] names = null;
    if (fileflag < 2) {
      jdataio ioclass = new jdataio();
      File[] filearray = ioclass.openfiles(OpenDialog.getDefaultDirectory(), IJ.getInstance());
      if (filearray.length == 0) {
        return;
      }
      String dir = filearray[0].getAbsolutePath();
      int sepindex = dir.lastIndexOf(File.separator);
      String newdir = dir.substring(0, sepindex + 1);
      OpenDialog.setDefaultDirectory(newdir);
      nfiles = filearray.length / 2;
      if (nfiles > 25) {
        nfiles = 25;
      }
      histograms = new Object[nfiles];
      names = organize_c3_files(filearray);
      for (int i = 0; i < nfiles; i++) {
        try {
          int length1 = (int) (((double) filearray[2 * i].length() - 128.0) / 4.0);
          int length2 = (int) (((double) filearray[2 * i + 1].length() - 128.0) / 4.0);
          int length3 = (int) (((double) filearray[2 * i].length()) / 2.0);
          int length4 = (int) (((double) filearray[2 * i + 1].length()) / 2.0);
          InputStream instream = new BufferedInputStream(new FileInputStream(filearray[2 * i]));
          InputStream instream2 =
              new BufferedInputStream(new FileInputStream(filearray[2 * i + 1]));
          if (fileflag == 0) {
            int[] pmdata = new int[length1];
            int[] pmdata2 = new int[length2];
            if (!ioclass.skipstreambytes(instream, 128)) {
              showioerror();
              instream.close();
              return;
            }
            if (!ioclass.skipstreambytes(instream2, 128)) {
              showioerror();
              instream2.close();
              return;
            }
            if (!ioclass.readintelintfile(instream, length1, pmdata)) {
              showioerror();
              instream.close();
              return;
            }
            if (!ioclass.readintelintfile(instream2, length2, pmdata2)) {
              showioerror();
              instream2.close();
              return;
            }
            if (ch2green) {
              histograms[i] = (new pmodeconvert()).pm2pch(pmdata2, pmdata, sfreq, 20000000);
            } else {
              histograms[i] = (new pmodeconvert()).pm2pch(pmdata, pmdata2, sfreq, 20000000);
            }
          } else {
            float[] tmdata = new float[length3];
            float[] tmdata2 = new float[length4];
            if (!ioclass.readintelshortfile(instream, length3, tmdata)) {
              showioerror();
              instream.close();
              return;
            }
            if (!ioclass.readintelshortfile(instream2, length4, tmdata2)) {
              showioerror();
              instream2.close();
              return;
            }
            if (ch2green) {
              histograms[i] = (new pmodeconvert()).create_2Dhistogram(tmdata2, tmdata);
            } else {
              histograms[i] = (new pmodeconvert()).create_2Dhistogram(tmdata, tmdata2);
            }
          }
          if (((float[][]) histograms[i]).length > xmax) {
            xmax = ((float[][]) histograms[i]).length;
          }
          if (((float[][]) histograms[i])[0].length > ymax) {
            ymax = ((float[][]) histograms[i])[0].length;
          }
          instream.close();
          instream2.close();
        } catch (IOException e) {
          showioerror();
          return;
        }
      }
    } else {
      if (fileflag == 2) {
        ImageWindow iw = WindowManager.getCurrentWindow();
        float[][] trajectories = (float[][]) jutils.runPW4VoidMethod(iw, "getYValues");
        float[][] tempxvals = (float[][]) jutils.runPW4VoidMethod(iw, "getXValues");
        sfreq = 1.0 / ((double) tempxvals[0][1]);
        nfiles = trajectories.length / 2;
        if (nfiles > 25) {
          nfiles = 25;
        }
        names = new String[nfiles + 1];
        names[nfiles] = "avg";
        histograms = new Object[nfiles];
        for (int i = 0; i < nfiles; i++) {
          names[i] = "trajectory " + (i + 1);
          if (ch2green) {
            histograms[i] =
                (new pmodeconvert())
                    .create_2Dhistogram(trajectories[2 * i + 1], trajectories[2 * i]);
          } else {
            histograms[i] =
                (new pmodeconvert())
                    .create_2Dhistogram(trajectories[2 * i], trajectories[2 * i + 1]);
          }
          if (((float[][]) histograms[i]).length > xmax) {
            xmax = ((float[][]) histograms[i]).length;
          }
          if (((float[][]) histograms[i])[0].length > ymax) {
            ymax = ((float[][]) histograms[i])[0].length;
          }
        }
      } else {
        // here we read tab delimited lines from files
        jdataio ioclass = new jdataio();
        File[] filearray = ioclass.openfiles(OpenDialog.getDefaultDirectory(), IJ.getInstance());
        if (filearray.length == 0) {
          return;
        }
        String dir = filearray[0].getAbsolutePath();
        int sepindex = dir.lastIndexOf(File.separator);
        String newdir = dir.substring(0, sepindex + 1);
        OpenDialog.setDefaultDirectory(newdir);
        nfiles = filearray.length;
        if (nfiles > 25) {
          nfiles = 25;
        }
        histograms = new Object[nfiles];
        names = new String[nfiles + 1];
        names[nfiles] = "avg";
        for (int i = 0; i < nfiles; i++) {
          try {
            names[i] = filearray[i].getName();
            BufferedReader d = new BufferedReader(new FileReader(filearray[i]));
            String[] lines = new String[256];
            int counter = 0;
            do {
              lines[counter] = d.readLine();
              counter++;
            } while ((lines[counter - 1] != null && lines[counter - 1] != "") && counter < 256);
            int numcolumns = 0;
            for (int j = 0; j < counter - 1; j++) {
              int temp = getncolumns(lines[j]);
              if (temp > numcolumns) {
                numcolumns = temp;
              }
            }
            float[][] temphist2 = null;
            if (ch2green) {
              temphist2 = new float[numcolumns][counter - 1];
            } else {
              temphist2 = new float[counter - 1][numcolumns];
            }
            for (int k = 0; k < counter - 1; k++) {
              float[] temp = tab_delim2float(lines[k]);
              for (int j = 0; j < numcolumns; j++) {
                if (ch2green) {
                  temphist2[j][k] = temp[j];
                } else {
                  temphist2[k][j] = temp[j];
                }
              }
            }
            histograms[i] = temphist2;
            d.close();
          } catch (IOException e) {
            showioerror();
            return;
          }
        }
        for (int i = 0; i < nfiles; i++) {
          if (((float[][]) histograms[i]).length > xmax) {
            xmax = ((float[][]) histograms[i]).length;
          }
          if (((float[][]) histograms[i])[0].length > ymax) {
            ymax = ((float[][]) histograms[i])[0].length;
          }
        }
      }
    }
    // note that here x is green and y is red
    float[][][] pch = new float[nfiles][xmax][ymax];
    for (int i = 0; i < nfiles; i++) {
      for (int j = 0; j < ((float[][]) histograms[i]).length; j++) {
        for (int k = 0; k < ((float[][]) histograms[i])[j].length; k++) {
          pch[i][j][k] = ((float[][]) histograms[i])[j][k];
        }
      }
    }

    final PCH2DFitWindow cw = new PCH2DFitWindow();
    cw.init(names, pch, psfflag);

    final Frame f = new Frame("PCH 2D Analysis");
    f.setLocation(10, 10);
    f.addWindowListener(
        new WindowAdapter() {
          public void windowClosing(WindowEvent e) {
            f.dispose();
          }
        });

    f.add(cw);
    f.pack();
    f.setResizable(false);
    Insets ins = f.getInsets();
    cw.totalSize.height = PCH2DFitWindow.H + ins.bottom + ins.top + 65;
    cw.totalSize.width = PCH2DFitWindow.WR + ins.left + ins.right;
    f.setSize(cw.totalSize);
    f.setVisible(true);
    cw.requestFocus();
  }
Пример #8
0
  private void geterrors() {
    GenericDialog gd = new GenericDialog("Options");
    float conf = 0.67f;
    gd.addNumericField("Confidence Limit", (int) (conf * 100.0f), 5, 10, null);
    gd.addChoice("Error Parameter", paramsnames, paramsnames[0]);
    double spacing = 0.01;
    gd.addNumericField("Chi^2 plot spacing (% of value)?", spacing * 100.0, 2, 10, null);
    boolean globalerror = false;
    gd.addCheckbox("Global Fit Error?", globalerror);
    int dataset = 0;
    gd.addNumericField("Data Set (for Global Error)", dataset, 0);
    gd.showDialog();
    if (gd.wasCanceled()) {
      return;
    }
    conf = 0.01f * (float) gd.getNextNumber();
    int paramindex = (int) gd.getNextChoiceIndex();
    spacing = 0.01 * gd.getNextNumber();
    globalerror = gd.getNextBoolean();
    dataset = (int) gd.getNextNumber();

    if (globalerror) {
      support_plane_errors erclass = new support_plane_errors(this, 0.0001, 50, true, 0.1);
      int[] erindeces = {paramindex, dataset};
      // need to set up all the matrices
      int nsel = 0;
      int nparams = 11;
      for (int i = 0; i < ncurves; i++) {
        if (include[i]) {
          nsel++;
        }
      }
      double[][] params = new double[nsel][nparams];
      String[][] tempformulas = new String[nsel][nparams];
      double[][][] constraints = new double[2][nsel][nparams];
      int[][] vflmatrix = new int[nsel][nparams];

      float[][] tempdata = new float[nsel][xpts * ypts];
      float[][] tempweights = new float[nsel][xpts * ypts];

      int nfit = 0;
      int counter = 0;
      for (int i = 0; i < ncurves; i++) {
        if (include[i]) {
          for (int j = 0; j < nparams; j++) {
            params[counter][j] = globalparams[i][j];
            tempformulas[counter][j] = globalformulas[i][j];
            constraints[0][counter][j] = globalconstraints[0][i][j];
            constraints[1][counter][j] = globalconstraints[1][i][j];
            vflmatrix[counter][j] = globalvflmatrix[i][j];
            if (vflmatrix[counter][j] == 0 || (j == 0 && vflmatrix[counter][j] == 2)) {
              nfit++;
            }
          }
          for (int j = 0; j < xpts; j++) {
            for (int k = 0; k < ypts; k++) {
              tempdata[counter][j + k * xpts] = (float) ((double) pch[i][j][k] / (double) nmeas[i]);
              tempweights[counter][j + k * xpts] = weights[i][j][k];
            }
          }
          counter++;
        }
      }
      int dofnum = xpts * ypts * nsel - (nfit - 1) - 1;
      int dofden = xpts * ypts * nsel - nfit - 1;
      // double flim=FLimit(dofnum,dofden,(double)conf);
      double flim = (new jdist()).FLimit(dofnum, dofden, (double) conf);
      IJ.log("FLimit = " + (float) flim);
      if (flim == Double.NaN && flim < 1.0) {
        IJ.showMessage("Invalid Limiting F Value");
        return;
      }
      double truespacing = Math.abs(params[erindeces[1]][erindeces[0]] * spacing);
      double[][] c2plot =
          erclass.geterrorsglobal(
              params,
              vflmatrix,
              tempformulas,
              paramsnames,
              constraints,
              tempdata,
              tempweights,
              flim,
              truespacing,
              erindeces);
      IJ.log("upper limit = " + c2plot[1][0] + " lower limit = " + c2plot[0][0]);
      int templength = c2plot[0].length;
      float[][] c2plotf = new float[2][templength - 1];
      for (int i = 0; i < (templength - 1); i++) {
        c2plotf[0][i] = (float) c2plot[0][i + 1];
        c2plotf[1][i] = (float) c2plot[1][i + 1];
      }
      new PlotWindow4(
              "c2 plot",
              paramsnames[paramindex] + "[" + dataset + "]",
              "Chi^2",
              c2plotf[0],
              c2plotf[1])
          .draw();
    } else {
      support_plane_errors erclass = new support_plane_errors(this, 0.0001, 50, false, 0.1);
      int errindex = paramindex;

      float[] tempdata = new float[xpts * ypts];
      float[] tempweights = new float[xpts * ypts];
      for (int i = 0; i < xpts; i++) {
        for (int j = 0; j < ypts; j++) {
          tempdata[i + j * xpts] = (float) ((double) avg[i][j] / (double) nmeas[ncurves]);
          tempweights[i + j * xpts] = avgweights[i][j];
        }
      }

      int nfit = 0;
      for (int i = 0; i < 7; i++) {
        if (avgfixes[i] == 0) {
          nfit++;
        }
      }
      int dofnum = xpts * ypts - (nfit - 1) - 1;
      int dofden = xpts * ypts - nfit - 1;
      double flim = (new jdist()).FLimit(dofnum, dofden, (double) conf);
      IJ.log("FLimit = " + (float) flim);
      if (flim == Double.NaN && flim < 1.0) {
        IJ.showMessage("Invalid Limiting F Value");
        return;
      }
      double truespacing = Math.abs(avgparams[errindex] * spacing);
      double[][] c2plot =
          erclass.geterrors(
              avgparams,
              avgfixes,
              avgconstraints,
              tempdata,
              tempweights,
              flim,
              truespacing,
              errindex);
      IJ.log("upper limit = " + c2plot[1][0] + " lower limit = " + c2plot[0][0]);
      int templength = c2plot[0].length;
      float[][] c2plotf = new float[2][templength - 1];
      for (int i = 0; i < (templength - 1); i++) {
        c2plotf[0][i] = (float) c2plot[0][i + 1];
        c2plotf[1][i] = (float) c2plot[1][i + 1];
      }
      new PlotWindow4("c2 plot", paramsnames[errindex], "Chi^2", c2plotf[0], c2plotf[1]).draw();
    }
  }
  public void run(String arg) {
    GenericDialog gd = new GenericDialog("Options");
    gd.addCheckbox("Acceptor_First", true);
    gd.showDialog();
    if (gd.wasCanceled()) return;
    boolean a1 = gd.getNextBoolean();
    int asp = 0;
    int dsp = 1;
    int aop = 2;
    int dop = 3;
    int atp = 4;
    int dtp = 5;
    if (!a1) {
      asp = 1;
      dsp = 0;
      aop = 3;
      dop = 2;
      atp = 5;
      dtp = 4;
    }
    ImageWindow iw = WindowManager.getCurrentWindow();
    float[][] xvals = (float[][]) jutils.runPW4VoidMethod(iw, "getXValues");
    float[][] yvals = (float[][]) jutils.runPW4VoidMethod(iw, "getYValues");
    int[] npts = (int[]) jutils.runPW4VoidMethod(iw, "getNpts");
    int maxpts = (int) jstatistics.getstatistic("Max", npts, null);
    int nsets = npts.length / 6;
    float[][] rtxvals = new float[nsets][maxpts];
    float[][] rtavals = new float[nsets][maxpts];
    float[][] rtdvals = new float[nsets][maxpts];
    int[] rtnpts = new int[nsets];
    int fretlength = 10;
    float[][] stfretvals = new float[nsets][fretlength];
    float[][] offfretvals = new float[nsets][fretlength];
    TextWindow tw = jutils.selectTable("DNA Damage FRET");
    if (tw == null)
      tw =
          new TextWindow(
              "DNA Damage FRET",
              "title\tacceptor\tdonor\testripe\teoff\tmaxart\tmaxdrt",
              "",
              400,
              200);
    // note that st stands for stripe and off is for areas off the damage stripe
    for (int i = 0; i < npts.length / 6; i++) {
      int len = npts[i * 6];
      int damageindex = findbleach(yvals[i * 6 + dsp], len);
      int fretindex = findbleach(yvals[i * 6 + atp], len);
      IJ.log("set " + i + " damage pos = " + damageindex + " , fret pos = " + fretindex);
      int predamagestart = damageindex - 4;
      int prefretstart = fretindex - 5;
      float staccpredam = getavg(yvals[i * 6 + asp], len, predamagestart, damageindex - 1);
      float stdonpredam = getavg(yvals[i * 6 + dsp], len, predamagestart, damageindex - 1);
      float nucaccpredam = getavg(yvals[i * 6 + atp], len, predamagestart, damageindex - 1);
      float nucdonpredam = getavg(yvals[i * 6 + dtp], len, predamagestart, damageindex - 1);
      float stdonprefret = getavg(yvals[i * 6 + dsp], len, prefretstart, fretindex - 2);
      float stdonafret = getavg(yvals[i * 6 + dsp], len, fretindex, fretindex + 3);
      float offdonprefret = getavg(yvals[i * 6 + dop], len, prefretstart, fretindex - 2);
      float offdonafret = getavg(yvals[i * 6 + dop], len, fretindex, fretindex + 3);
      float estripe = 1.0f - stdonprefret / stdonafret;
      float eoff = 1.0f - offdonprefret / offdonafret;
      rtnpts[i] = len;
      for (int j = 0; j < len; j++) {
        rtxvals[i][j] = j - damageindex - 1;
        rtavals[i][j] =
            (yvals[i * 6 + asp][j] / staccpredam) / (yvals[i * 6 + atp][j] / nucaccpredam);
        rtdvals[i][j] =
            (yvals[i * 6 + dsp][j] / stdonpredam) / (yvals[i * 6 + dtp][j] / nucdonpredam);
      }
      float[] smart = (float[]) algutils.get_subarray(rtavals[i], 0, fretindex);
      float[] smdrt = (float[]) algutils.get_subarray(rtdvals[i], 0, fretindex);
      jsmooth.blur1D(smart, 2.0f);
      jsmooth.blur1D(smdrt, 2.0f);
      float maxart = 0.0f;
      float maxdrt = 0.0f;
      for (int j = 0; j < fretindex - 2; j++) {
        if (smart[j] > maxart) maxart = smart[j];
        if (smdrt[j] > maxdrt) maxdrt = smdrt[j];
      }

      stfretvals[i] = getregion(yvals[i * 6 + dsp], len, prefretstart, fretlength);
      offfretvals[i] = getregion(yvals[i * 6 + dop], len, prefretstart, fretlength);
      tw.append(
          iw.getTitle()
              + "-"
              + (i + 1)
              + "\t"
              + staccpredam
              + "\t"
              + stdonpredam
              + "\t"
              + estripe
              + "\t"
              + eoff
              + "\t"
              + maxart
              + "\t"
              + maxdrt);
    }
    new PlotWindow4("Stripe_FRET_profiles", "time", "intensity", stfretvals, null).draw();
    new PlotWindow4("OffStripe_FRET_profiles", "time", "intensity", offfretvals, null).draw();
    new PlotWindow4("Acc_Rt_profiles", "time", "intensity", rtxvals, rtavals, rtnpts).draw();
    new PlotWindow4("Don_Rt_profiles", "time", "intensity", rtxvals, rtdvals, rtnpts).draw();
  }
Пример #10
0
	public void run(String arg) {

  int[] wList = WindowManager.getIDList();
        if (wList==null) {
            IJ.error("No images are open.");
            return;
        }
	double kernel=3;
	double kernelsum = 0;
	double kernelvarsum =0;
	double kernalvar = 0;
	double sigmawidth = 2;
	int kernelindex, minpixnumber;
	String[] kernelsize =  { "3�,"5�, "7�, "9�};

	GenericDialog gd = new GenericDialog("Sigma Filter");
	gd.addChoice("Kernel size", kernelsize, kernelsize[0]);
	gd.addNumericField("Sigma width",sigmawidth , 2);
	gd.addNumericField("Minimum number of pixels", 1, 0);

	gd.addCheckbox("Keep source:",true);
	gd.addCheckbox("Do all stack:",true);
	gd.addCheckbox("Modified Lee's FIlter:",true);
	       	
	gd.showDialog();
       	if (gd.wasCanceled()) return ;
	kernelindex =  gd.getNextChoiceIndex();
          	sigmawidth = gd.getNextNumber();
          	minpixnumber = ((int)gd.getNextNumber());
          	boolean keep = gd.getNextBoolean();
	boolean doallstack = gd.getNextBoolean();
	boolean modified = gd.getNextBoolean();
	if (kernelindex==0) kernel = 3;
	if (kernelindex==1) kernel = 5;
	if (kernelindex==2) kernel = 7;
	if (kernelindex==3) kernel = 9;
    	long start = System.currentTimeMillis();
	
if (minpixnumber> (kernel*kernel)){
	      IJ.showMessage("Sigma filter", "There must be more pixels in the kernel than+\n" + "the minimum number to be included");
            return;
        }
	double v, midintensity;
	int   x, y, ix, iy;
	double sum = 0;
	double backupsum =0;
	int count = 0;
	int n = 0;
	if (keep) {IJ.run("Select All"); IJ.run("Duplicate...", "title='Sigma filtered' duplicate");}

	int radius = (int)(kernel-1)/2;
	ImagePlus imp = WindowManager.getCurrentImage();
	ImageStack stack1 = imp.getStack();
	int width = imp.getWidth();
	int height = imp.getHeight();
	int nslices = stack1.getSize();
	int cslice = imp.getCurrentSlice();
	double status = width*height*nslices;
	
	ImageProcessor  ip = imp.getProcessor();
	int sstart = 1;
	if (!doallstack) {sstart = cslice; nslices=sstart;status = status/nslices;};

 for (int i=sstart; i<=nslices; i++) {
                imp.setSlice(i);
                    
for (x=radius;x<width+radius;x++)	{
		for (y=radius;y<height+radius;y++)	{
			
			midintensity = ip.getPixelValue(x,y);
			count = 0;
			sum = 0;
			kernelsum =0;
			kernalvar =0;
			kernelvarsum =0;
			backupsum = 0;

		//calculate mean of kernel value
			for (ix=0;ix<kernel;ix++)	{
					for (iy=0;iy<kernel;iy++)	{
							v = ip.getPixelValue(x+ix-radius,y+iy-radius);
							kernelsum = kernelsum+v;
								}
						}
			double sigmacalcmean = (kernelsum/(kernel*kernel));

		//calculate variance of kernel
			for (ix=0;ix<kernel;ix++)	{
					for (iy=0;iy<kernel;iy++)	{
							v = ip.getPixelValue(x+ix-radius,y+iy-radius);
							kernalvar = (v-sigmacalcmean)*(v-sigmacalcmean);
							kernelvarsum = kernelvarsum + kernalvar;
								}
						}
			//double variance = kernelvarsum/kernel;
			double sigmacalcvar = kernelvarsum/((kernel*kernel)-1);

			//calcuate sigma range = sqrt(variance/(mean^2)) � sigmawidth
			double sigmarange  = sigmawidth*(Math.sqrt((sigmacalcvar) /(sigmacalcmean*sigmacalcmean)));
			//calulate sigma top value and bottom value
			double sigmatop = midintensity*(1+sigmarange);
			double sigmabottom = midintensity*(1-sigmarange);
			//calculate mean of values that differ are in sigma range.
			for (ix=0;ix<kernel;ix++)	{
					for (iy=0;iy<kernel;iy++)	{
							v = ip.getPixelValue(x+ix-radius,y+iy-radius);
							if ((v>=sigmabottom)&&(v<=sigmatop)){
								sum = sum+v;
								count = count+1;   }
								backupsum = v+ backupsum;
										}		
						}
//if there are too few pixels in the kernal that are within sigma range, the 
//mean of the entire kernal is taken. My modification of Lee's filter is to exclude the central value 
//from the calculation of the mean as I assume it to be spuriously high or low 
			if (!(count>(minpixnumber)))
				{sum = (backupsum-midintensity);
				count = (int)((kernel*kernel)-1);
				if (!modified)
					{sum = (backupsum);
					count  = (int)(kernel*kernel);}
				}
			
			double val =  (sum/count);
			ip.putPixelValue(x,y, val);
			n = n+1;
	double percentage = (((double)n/status)*100);
			 IJ.showStatus(IJ.d2s(percentage,0) +"% done");		
			
}

	//		IJ.showProgress(i, status);
					}}
			imp.updateAndDraw();
 			IJ.showStatus(IJ.d2s((System.currentTimeMillis()-start)/1000.0, 2)+" seconds");        }      
Пример #11
0
 public void run(String arg) {
   Frame[] niframes = WindowManager.getNonImageWindows();
   String[] titles = new String[niframes.length + 1];
   for (int i = 0; i < niframes.length; i++) {
     titles[i] = niframes[i].getTitle();
   }
   titles[niframes.length] = "Clipboard";
   GenericDialog gd = new GenericDialog("Windows");
   boolean importfile = false;
   gd.addCheckbox("Import from file?", importfile);
   gd.addChoice("Windows", titles, titles[0]);
   boolean hasxvals = false;
   gd.addCheckbox("X Vals Column?", hasxvals);
   boolean multix = false;
   gd.addCheckbox("Multi_X_Columns?", multix);
   boolean skipendzeros = false;
   gd.addCheckbox("Skip_end_zeros?", skipendzeros);
   String[] delimiters = {"Tab", "Comma", "Space"};
   gd.addChoice("Delimiter", delimiters, delimiters[0]);
   gd.showDialog();
   if (gd.wasCanceled()) {
     return;
   }
   importfile = gd.getNextBoolean();
   int index = gd.getNextChoiceIndex();
   hasxvals = gd.getNextBoolean();
   multix = gd.getNextBoolean();
   skipendzeros = gd.getNextBoolean();
   int delimindex = gd.getNextChoiceIndex();
   if (multix) hasxvals = true;
   String textdata = "";
   if (importfile) {
     OpenDialog od = new OpenDialog("Open File", "", ".txt");
     String directory = od.getDirectory();
     String name = od.getFileName();
     if (name == null) {
       return;
     }
     try {
       File infile = new File(directory + name);
       BufferedReader b = new BufferedReader(new FileReader(infile));
       textdata = (new jdataio()).readstringfile(b);
       b.close();
     } catch (IOException e) {
       return;
     }
   } else {
     if (index == niframes.length) {
       // here we get the data from the clipboard
       Transferable t = Toolkit.getDefaultToolkit().getSystemClipboard().getContents(null);
       try {
         if (t != null && t.isDataFlavorSupported(DataFlavor.stringFlavor)) {
           textdata = (String) t.getTransferData(DataFlavor.stringFlavor);
         }
       } catch (UnsupportedFlavorException e) {
       } catch (IOException e) {
       }
       if (textdata.equals("")) {
         IJ.error("Error copying from clipboard.");
         return;
       }
     } else {
       if (niframes[index] instanceof Editor) {
         Editor tw = (Editor) niframes[index];
         textdata = tw.getText();
       } else {
         if (niframes[index] instanceof TextWindow) {
           TextWindow tw = (TextWindow) niframes[index];
           textdata = tw.getTextPanel().getText();
         } else {
           IJ.showMessage("Not a valid text window");
           return;
         }
       }
     }
   }
   if (textdata == null) {
     IJ.showMessage("Error in Obtaining String");
     return;
   }
   if (textdata.indexOf("\r") >= 0) {
     textdata = textdata.replace('\r', '\n');
   }
   char[] delims = {'\t', ',', ' '};
   delimit_string ds = new delimit_string(delims[delimindex]);
   String[] rows = ds.getrows(textdata);
   int lines = rows.length;
   int columns = ds.getnumcolumns(rows[0]);
   int ycolumns = columns;
   if (hasxvals) {
     if (multix) {
       ycolumns /= 2;
     } else {
       ycolumns--;
     }
   }
   if (multix) {
     float[][] ydata = new float[ycolumns][lines];
     float[][] xdata = new float[ycolumns][lines];
     for (int i = 0; i < lines; i++) {
       float[] temp = ds.delim2float(rows[i], columns);
       for (int j = 0; j < ycolumns; j++) {
         ydata[j][i] = temp[2 * j + 1];
         xdata[j][i] = temp[2 * j];
       }
     }
     int[] npts = new int[ycolumns];
     for (int i = 0; i < ycolumns; i++) {
       npts[i] = lines;
     }
     if (skipendzeros) {
       for (int i = 0; i < ycolumns; i++) {
         int counter = lines - 1;
         while ((xdata[i][counter] == 0.0f || Float.isNaN(xdata[i][counter])) && counter > 0) {
           xdata[i][counter] = 0.0f;
           ydata[i][counter] = 0.0f;
           npts[i]--;
           counter--;
         }
       }
     }
     (new PlotWindow4("Text Plot", "x", "y", xdata, ydata, npts)).draw();
   } else {
     float[][] tempydata = new float[ycolumns][lines];
     float[] tempxdata = new float[lines];
     float[][] xdata = null;
     float[][] ydata = null;
     int startcolumn = 0;
     if (hasxvals) startcolumn = 1;
     for (int i = 0; i < lines; i++) {
       float[] temp = ds.delim2float(rows[i], columns);
       if (hasxvals) {
         tempxdata[i] = temp[0];
       } else {
         tempxdata[i] = (float) (i + 1);
       }
       for (int j = 0; j < ycolumns; j++) {
         tempydata[j][i] = temp[j + startcolumn];
       }
     }
     int[] npts = new int[ycolumns];
     npts[0] = lines;
     if (skipendzeros) {
       int maxpts = 0;
       for (int i = 0; i < ycolumns; i++) {
         int counter = lines - 1;
         npts[i] = lines;
         while ((tempydata[i][counter] == 0.0f || Float.isNaN(tempydata[i][counter]))
             && counter > 0) {
           npts[i]--;
           counter--;
         }
         if (npts[i] > maxpts) maxpts = npts[i];
         IJ.log("" + npts[i]);
       }
       ydata = new float[ycolumns][maxpts];
       xdata = new float[ycolumns][maxpts];
       for (int i = 0; i < ycolumns; i++) {
         // npts[i]=npts[0];
         System.arraycopy(tempxdata, 0, xdata[i], 0, npts[i]);
         System.arraycopy(tempydata[i], 0, ydata[i], 0, npts[i]);
       }
     } else {
       ydata = tempydata;
       xdata = new float[ycolumns][];
       for (int i = 0; i < ycolumns; i++) {
         npts[i] = npts[0];
         xdata[i] = tempxdata.clone();
       }
     }
     (new PlotWindow4("Text Plot", "x", "y", xdata, ydata, npts)).draw();
   }
 }
Пример #12
0
  public boolean analyseParticles(MyFunctions f) {
    GenericDialog gd = new GenericDialog("Analyse PALM/STORM Particles");
    gd.addNumericField("Minimum SNR", prefs.get("QuickPALM.snr", 5), 2);
    gd.addNumericField("Maximum FWHM (in px)", prefs.get("QuickPALM.fwhm", 4), 0);
    gd.addNumericField("Image plane pixel size (nm)", prefs.get("QuickPALM.pixelsize", 106), 2);
    gd.addCheckbox("Smart SNR", prefs.get("QuickPALM.smartsnr", true));
    gd.addCheckbox(
        "3D PALM (astigmatism) - will require calibration file",
        prefs.get("QuickPALM.is3d", false));
    gd.addCheckbox("Online rendering", prefs.get("QuickPALM.view", true));
    gd.addCheckbox("Attach to running acquisition", prefs.get("QuickPALM.attach", false));
    gd.addCheckbox("Stream particle info directly into file", prefs.get("QuickPALM.stream", true));
    gd.addMessage("\n");
    // -----------------------------------------
    gd.addMessage("-- Online rendering settings (used only if selected) --");
    gd.addMessage("\n");
    gd.addNumericField("Pixel size of rendered image (nm)", 30, 2);
    gd.addNumericField("Accumulate last (0 to accumulate all frames)", 0, 0);
    gd.addNumericField("Update every (frames)", 10, 0);
    // gd.addNumericField("Allow color saturation (%)", 50, 0);
    gd.addMessage("\n");
    // -----------------------------------------
    gd.addMessage("-- Attach to running acquisition settings (used only if selected) --");
    gd.addMessage("\n");
    gd.addStringField(
        "_Image name pattern (NN...NN represents the numerical change)",
        prefs.get("QuickPALM.pattern", "imgNNNNNNNNN.tif"),
        20);
    gd.addNumericField("Start NN...NN with", 0, 0);
    gd.addNumericField("In acquisition max. wait time for new image (ms)", 50, 0);
    gd.addMessage("\n");
    // -----------------------------------------
    gd.addMessage("-- Advanced settings (don't normally need to be changed) --");
    gd.addMessage("\n");
    gd.addNumericField("_Minimum symmetry (%)", prefs.get("QuickPALM.symmetry", 50), 0);
    gd.addNumericField(
        "Local threshold (% maximum intensity)", prefs.get("QuickPALM.lthreshold", 20), 0);
    gd.addNumericField("_Maximum iterations per frame", prefs.get("QuickPALM.maxiter", 1000), 0);
    gd.addNumericField(
        "Threads (each takes ~3*[frame size] in memory)", prefs.get("QuickPALM.nthreads", 50), 0);
    gd.addMessage("\n\nDon't forget to save the table in the end...");

    gd.showDialog();
    if (gd.wasCanceled()) return false;

    snr = (int) gd.getNextNumber();
    prefs.set("QuickPALM.snr", snr);
    fwhm = gd.getNextNumber();
    prefs.set("QuickPALM.fwhm", fwhm);
    pixelsize = gd.getNextNumber();
    prefs.set("QuickPALM.pixelsize", pixelsize);

    smartsnr = gd.getNextBoolean();
    prefs.set("QuickPALM.smartsnr", smartsnr);
    is3d = gd.getNextBoolean();
    prefs.set("QuickPALM.is3d", is3d);
    view = gd.getNextBoolean();
    prefs.set("QuickPALM.view", view);
    attach = gd.getNextBoolean();
    prefs.set("QuickPALM.attach", attach);

    if (gd.getNextBoolean()) {
      f.psave = new ParticleSaver();
      f.psave.setup();
      prefs.set("QuickPALM.stream", true);
    } else prefs.set("QuickPALM.stream", false);
    // --

    magn = pixelsize / gd.getNextNumber();
    viewer_accumulate = (int) gd.getNextNumber();
    viewer_update = (int) gd.getNextNumber();

    // --
    pattern = gd.getNextString().trim();
    prefs.set("QuickPALM.pattern", pattern);
    prefix = pattern.substring(0, pattern.indexOf("N"));
    sufix = pattern.substring(pattern.lastIndexOf("N") + 1, pattern.length());
    nimchars = pattern.split("N").length - 1;
    nimstart = (int) gd.getNextNumber();
    waittime = (int) gd.getNextNumber();

    // --

    symmetry = gd.getNextNumber() / 100;
    prefs.set("QuickPALM.symmetry", symmetry);
    pthrsh = gd.getNextNumber() / 100;
    prefs.set("QuickPALM.lthreshold", pthrsh * 100);
    maxpart = (int) gd.getNextNumber();
    prefs.set("QuickPALM.maxiter", maxpart);
    threads = (int) gd.getNextNumber();
    prefs.set("QuickPALM.nthreads", threads);

    return true;
  }
Пример #13
0
  public boolean reconstructDataset() {

    view_modes[0] = "3D color";
    view_modes[1] = "2D histogram";
    view_modes[2] = "2D particle intensity (16-bit)";
    view_modes[3] = "2D particle intensity (8-bit)";

    GenericDialog gd = new GenericDialog("Reconstruct PALM/STORM Dataset");
    gd.addNumericField(
        "Target pixel size for the rendered image (nm)",
        prefs.get("QuickPALM.viewer_tpixelsize", 30),
        2);
    gd.addNumericField("Original image width (px)", prefs.get("QuickPALM.viewer_owidth", 512), 2);
    gd.addNumericField("Original image height (px)", prefs.get("QuickPALM.viewer_oheight", 512), 2);
    gd.addChoice("View mode", view_modes, prefs.get("QuickPALM.view_mode", view_modes[1]));
    // gd.addNumericField("Allow image saturation (%)", prefs.get("QuickPALM.saturation", 50), 0);

    gd.addCheckbox(
        "Simulate sub-difraction spot (gaussian convolution - only 2D)",
        prefs.get("QuickPALM.viewer_doConvolve", true));
    // gd.addCheckbox("Make 3D stack", prefs.get("QuickPALM.viewer_do3d", false));
    // gd.addCheckbox("Make movie", prefs.get("QuickPALM.viewer_doMovie", false));
    gd.addCheckbox("Make 3D stack", false);
    gd.addCheckbox("Make movie", false);
    // gd.addCheckbox("Save only and don't show", prefs.get("QuickPALM.viewer_doSave", false));
    gd.addMessage("\n");

    // -----------------------------------------
    gd.addMessage("-- Simulate sub-difraction spot settings (used only if selected) --");
    gd.addNumericField("FWHM of the spot", prefs.get("QuickPALM.viewer_fwhm", 30), 2);
    gd.addMessage("\n");

    // -----------------------------------------
    gd.addMessage("-- Make 3D stack settings (used only if selected) --");
    gd.addNumericField("Z-spacing between slices (nm)", prefs.get("QuickPALM.viewer_zstep", 50), 2);
    gd.addNumericField(
        "Merge particle Z-position above (nm - 0 for full Z range)",
        prefs.get("QuickPALM.viewer_mergeabove", 0),
        2);
    gd.addNumericField(
        "Merge particle Z-position bellow (nm - 0 for full Z range)",
        prefs.get("QuickPALM.viewer_mergebellow", 0),
        2);
    gd.addMessage("\n");

    // -----------------------------------------
    gd.addMessage("-- Make movie settings (used only if selected) --");
    gd.addNumericField(
        "Make a reconstruction in every N frames", prefs.get("QuickPALM.viewer_update", 10), 0);
    gd.addNumericField(
        "Accumulate N neighboring frames for each reconstruction\n(set to 0 to accumulate all the preceding frames)",
        prefs.get("QuickPALM.viewer_accumulate", 100),
        0);

    gd.showDialog();
    if (gd.wasCanceled()) return false;

    viewer_tpixelsize = gd.getNextNumber();
    prefs.set("QuickPALM.viewer_tpixelsize", viewer_tpixelsize);
    viewer_owidth = (int) gd.getNextNumber();
    prefs.set("QuickPALM.viewer_owidth", viewer_owidth);
    viewer_oheight = (int) gd.getNextNumber();
    prefs.set("QuickPALM.viewer_oheight", viewer_oheight);
    view_mode = gd.getNextChoice();
    prefs.set("QuickPALM.view_mode", view_mode);

    viewer_doConvolve = gd.getNextBoolean();
    prefs.set("QuickPALM.viewer_doConvolve", viewer_doConvolve);
    viewer_do3d = gd.getNextBoolean();
    prefs.set("QuickPALM.viewer_do3d", viewer_do3d);
    viewer_doMovie = gd.getNextBoolean();
    prefs.set("QuickPALM.viewer_doMovie", viewer_doMovie);
    // viewer_doSave = gd.getNextBoolean();
    // prefs.set("QuickPALM.viewer_doSave", viewer_doSave);

    // -- Simulate sub-difraction spot
    viewer_fwhm = gd.getNextNumber();
    prefs.set("QuickPALM.viewer_fwhm", viewer_fwhm);

    // -- Show B&W
    // viewer_is8bit = gd.getNextBoolean();
    // prefs.set("QuickPALM.viewer_is8bit", viewer_is8bit);

    // -- Make 3D stack
    viewer_zstep = gd.getNextNumber();
    prefs.set("QuickPALM.viewer_zstep", viewer_zstep);
    viewer_mergeabove = gd.getNextNumber();
    prefs.set("QuickPALM.viewer_mergeabove", viewer_mergeabove);
    viewer_mergebellow = gd.getNextNumber();
    prefs.set("QuickPALM.viewer_mergebellow", viewer_mergebellow);

    // -- Make Movie
    viewer_update = (int) gd.getNextNumber();
    prefs.set("QuickPALM.viewer_update", viewer_update);
    viewer_accumulate = (int) gd.getNextNumber();
    prefs.set("QuickPALM.viewer_accumulate", viewer_accumulate);

    return true;
  }
Пример #14
0
  /** Ask for parameters and then execute. */
  public void run(String arg) {
    // 1 - Obtain the currently active image:
    ImagePlus imp = IJ.getImage();

    if (null == imp) {
      IJ.showMessage("There must be at least one image open");
      return;
    }

    if (imp.getBitDepth() != 8) {
      IJ.showMessage("Error", "Only 8-bit images are supported");
      return;
    }

    // 2 - Ask for parameters:
    GenericDialog gd = new GenericDialog("Auto Local Threshold");
    String[] methods = {
      "Try all",
      "Bernsen",
      "Contrast",
      "Mean",
      "Median",
      "MidGrey",
      "Niblack",
      "Otsu",
      "Phansalkar",
      "Sauvola"
    };
    gd.addMessage("Auto Local Threshold v1.5");
    gd.addChoice("Method", methods, methods[0]);
    gd.addNumericField("Radius", 15, 0);
    gd.addMessage("Special paramters (if different from default)");
    gd.addNumericField("Parameter_1", 0, 0);
    gd.addNumericField("Parameter_2", 0, 0);
    gd.addCheckbox("White objects on black background", true);
    if (imp.getStackSize() > 1) {
      gd.addCheckbox("Stack", false);
    }
    gd.addMessage("Thresholded result is always shown in white [255].");
    gd.showDialog();
    if (gd.wasCanceled()) return;

    // 3 - Retrieve parameters from the dialog
    String myMethod = gd.getNextChoice();
    int radius = (int) gd.getNextNumber();
    double par1 = (double) gd.getNextNumber();
    double par2 = (double) gd.getNextNumber();
    boolean doIwhite = gd.getNextBoolean();
    boolean doIstack = false;

    int stackSize = imp.getStackSize();
    if (stackSize > 1) doIstack = gd.getNextBoolean();

    // 4 - Execute!
    // long start = System.currentTimeMillis();
    if (myMethod.equals("Try all")) {
      ImageProcessor ip = imp.getProcessor();
      int xe = ip.getWidth();
      int ye = ip.getHeight();
      int ml = methods.length;
      ImagePlus imp2, imp3;
      ImageStack tstack = null, stackNew;
      if (stackSize > 1 && doIstack) {
        boolean doItAnyway = true;
        if (stackSize > 25) {
          YesNoCancelDialog d =
              new YesNoCancelDialog(
                  IJ.getInstance(),
                  "Auto Local Threshold",
                  "You might run out of memory.\n \nDisplay "
                      + stackSize
                      + " slices?\n \n \'No\' will process without display and\noutput results to the log window.");
          if (!d.yesPressed()) {
            //						doIlog=true; //will show in the log window
            doItAnyway = false;
          }
          if (d.cancelPressed()) return;
        }

        for (int j = 1; j <= stackSize; j++) {
          imp.setSlice(j);
          ip = imp.getProcessor();
          tstack = new ImageStack(xe, ye);
          for (int k = 1; k < ml; k++) tstack.addSlice(methods[k], ip.duplicate());
          imp2 = new ImagePlus("Auto Threshold", tstack);
          imp2.updateAndDraw();

          for (int k = 1; k < ml; k++) {
            imp2.setSlice(k);
            Object[] result = exec(imp2, methods[k], radius, par1, par2, doIwhite);
          }
          // if (doItAnyway){
          CanvasResizer cr = new CanvasResizer();
          stackNew = cr.expandStack(tstack, (xe + 2), (ye + 18), 1, 1);
          imp3 = new ImagePlus("Auto Threshold", stackNew);
          imp3.updateAndDraw();
          MontageMaker mm = new MontageMaker();
          mm.makeMontage(imp3, 3, 3, 1.0, 1, (ml - 1), 1, 0, true); // 3 columns and 3 rows
        }
        imp.setSlice(1);
        // if (doItAnyway)
        IJ.run("Images to Stack", "method=[Copy (center)] title=Montage");
        return;
      } else { // single image try all
        tstack = new ImageStack(xe, ye);
        for (int k = 1; k < ml; k++) tstack.addSlice(methods[k], ip.duplicate());
        imp2 = new ImagePlus("Auto Threshold", tstack);
        imp2.updateAndDraw();

        for (int k = 1; k < ml; k++) {
          imp2.setSlice(k);
          // IJ.log("analyzing slice with "+methods[k]);
          Object[] result = exec(imp2, methods[k], radius, par1, par2, doIwhite);
        }
        // imp2.setSlice(1);
        CanvasResizer cr = new CanvasResizer();
        stackNew = cr.expandStack(tstack, (xe + 2), (ye + 18), 1, 1);
        imp3 = new ImagePlus("Auto Threshold", stackNew);
        imp3.updateAndDraw();
        MontageMaker mm = new MontageMaker();
        mm.makeMontage(imp3, 3, 3, 1.0, 1, (ml - 1), 1, 0, true);
        return;
      }
    } else { // selected a method
      if (stackSize > 1 && doIstack) { // whole stack
        //				if (doIstackHistogram) {// one global histogram
        //					Object[] result = exec(imp, myMethod, noWhite, noBlack, doIwhite, doIset, doIlog,
        // doIstackHistogram );
        //				}
        //				else{ // slice by slice
        for (int k = 1; k <= stackSize; k++) {
          imp.setSlice(k);
          Object[] result = exec(imp, myMethod, radius, par1, par2, doIwhite);
        }
        //				}
        imp.setSlice(1);
      } else { // just one slice
        Object[] result = exec(imp, myMethod, radius, par1, par2, doIwhite);
      }
      // 5 - If all went well, show the image:
      // not needed here as the source image is binarised
    }
  }
Пример #15
0
 public void run(String arg) {
   String[] labels = {
     "Masked_Chromosomes", "Unmixed_Image", "Spectral_Image(optional)", "Spectra(optional)"
   };
   ImagePlus[] imps = jutils.selectImages(true, 4, labels);
   if (imps == null) {
     return;
   }
   if (imps[0] == null) {
     return;
   }
   float[] mask = (float[]) imps[0].getStack().getPixels(2);
   findblobs3 fb = new findblobs3(imps[0].getWidth(), imps[0].getHeight());
   float[] objects = fb.dofindblobs(mask, 0.5f);
   WaitForUserDialog dg =
       new WaitForUserDialog(
           "Optional Input", "Place RoiManager Points on Chromosome Segments (if desired)");
   dg.show();
   if (!dg.escPressed()) {
     RoiManager rman = RoiManager.getInstance();
     while (rman != null && rman.getCount() > 1) {
       Roi[] rois = rman.getRoisAsArray();
       int[] ids = new int[rois.length];
       for (int i = 0; i < rois.length; i++) {
         Rectangle r = rois[i].getBounds();
         ids[i] = (int) objects[r.x + fb.width * r.y];
       }
       objects = fb.link_objects(objects, ids);
       rman.reset();
       dg =
           new WaitForUserDialog(
               "Optional Input",
               "Place More RoiManager Points on Chromosome Segments (if desired)");
       dg.show();
       if (dg.escPressed()) break;
     }
   }
   int[] areas = fb.get_areas(objects);
   int[] temprank = jsort.get_javasort_order(areas);
   int[] arearank = jsort.get_javasort_order(temprank);
   for (int i = 0; i < fb.nobjects; i++) {
     arearank[i] = fb.nobjects - arearank[i] - 1;
   }
   // if the spectra are available, get them
   float[][][] spectra = null;
   Object[] data = null;
   if (imps[1] != null && imps[2] != null && imps[3] != null) {
     ImageWindow iw = imps[3].getWindow();
     if (iw.getClass().getName().equals("jguis.PlotWindow4")) {
       float[][] yvals = (float[][]) jutils.runPW4VoidMethod(iw, "getYValues");
       data = jutils.stack2array(imps[2].getStack());
       Object[] coef = jutils.stack2array(imps[1].getStack());
       spectra = new float[fb.nobjects][2][];
       for (int i = 0; i < fb.nobjects; i++) {
         spectra[i][0] = fb.get_object_spectrum(objects, (i + 1), data, "Sum");
         spectra[i][1] = new float[yvals[0].length];
         float[] tempcoef = fb.get_object_spectrum(objects, (i + 1), coef, "Sum");
         for (int j = 0; j < yvals[0].length; j++) {
           for (int k = 0; k < 5; k++) {
             spectra[i][1][j] += tempcoef[k] * yvals[k][j];
           }
         }
       }
     }
   }
   CompositeImage imp = (CompositeImage) imps[0];
   imp.setPosition(1, 1, 1);
   LUT graylut = jutils.get_lut_for_color(Color.white);
   imp.setChannelColorModel(graylut);
   imp.setPosition(2, 1, 1);
   LUT redlut = jutils.get_lut_for_color(Color.red);
   imp.setChannelColorModel(redlut);
   imp.setPosition(1, 1, 1);
   imp.updateAndRepaintWindow();
   SkyPanel_v3 sp = new SkyPanel_v3();
   int skychan = 6;
   if (imps[1] != null) skychan = imps[1].getNChannels();
   // assume that the sky image has 6 channels and that the second is the unknown green
   // shift the unknown green to the end
   ImagePlus skyimp = null;
   if (imps[1] != null) {
     Object[] skystack = jutils.stack2array(imps[1].getStack());
     // Object[]
     // skystack2={skystack[0],skystack[2],skystack[3],skystack[4],skystack[5],skystack[1]};
     Object[] skystack2 = null;
     if (skychan == 6)
       skystack2 = new Object[] {skystack[0], skystack[2], skystack[3], skystack[4], skystack[5]};
     else
       skystack2 = new Object[] {skystack[0], skystack[1], skystack[2], skystack[3], skystack[4]};
     skyimp =
         new ImagePlus(
             "rearranged", jutils.array2stack(skystack2, imps[1].getWidth(), imps[1].getHeight()));
   }
   int nch = 5;
   if (skyimp != null) nch = skyimp.getStack().getSize();
   GenericDialog gd2 = new GenericDialog("Options");
   gd2.addNumericField("Area Accuracy (percent)", 30, 0);
   for (int i = 0; i < nch; i++) {
     gd2.addNumericField("Ch_" + (i + 1) + "_Contr_Thresh", 0.35, 5, 15, null);
   }
   // gd2.addNumericField("Contribution Threshold",0.35,5,15,null);
   gd2.addCheckbox("Mouse?", false);
   gd2.addNumericField("Box_Width", 150, 0);
   gd2.addNumericField("Box_Height", 100, 0);
   gd2.showDialog();
   if (gd2.wasCanceled()) {
     return;
   }
   sp.areathresh = (float) gd2.getNextNumber();
   sp.objthresh2 = new float[nch];
   for (int i = 0; i < nch; i++) sp.objthresh2[i] = (float) gd2.getNextNumber();
   // sp.objthresh=(float)gd2.getNextNumber();
   boolean mouse = gd2.getNextBoolean();
   int bwidth = (int) gd2.getNextNumber();
   int bheight = (int) gd2.getNextNumber();
   int[] colorindices = {4, 1, 2, 6, 3};
   GenericDialog gd3 = new GenericDialog("Color Options");
   for (int i = 0; i < 5; i++)
     gd3.addChoice(
         "Ch" + (i + 1) + " Color",
         SkyPanel_v3.colornames,
         SkyPanel_v3.colornames[colorindices[i]]);
   gd3.showDialog();
   if (gd3.wasCanceled()) return;
   for (int i = 0; i < 5; i++) colorindices[i] = gd3.getNextChoiceIndex();
   sp.colorindices = colorindices;
   sp.nch = 5;
   sp.dapilast = false;
   sp.cellwidth = bwidth;
   sp.cellheight = bheight;
   sp.init(imps[0], skyimp, objects, areas, arearank, fb, true, spectra, data, mouse);
   SkyPanel_v3.launch_frame(sp);
 }
Пример #16
0
  public void run(String arg) {
    ImagePlus imp = WindowManager.getCurrentImage();
    Calibration cal = imp.getCalibration();
    GenericDialog gd = new GenericDialog("Options");
    int subsize = 32;
    gd.addNumericField("Subregion Size (pixels)?", subsize, 0);
    int stepsize = 16;
    gd.addNumericField("Step Size?", stepsize, 0);
    int shift = 3;
    gd.addNumericField("STICS temporal Shift?", shift, 0);
    float xoffset = 0.0f;
    gd.addNumericField("X_Offset", xoffset, 5, 15, null);
    float yoffset = 0.0f;
    gd.addNumericField("Y_Offset", yoffset, 5, 15, null);
    float multiplier = 8.0f;
    gd.addNumericField("Velocity Multiplier", multiplier, 5, 15, null);
    float ftime = 1.0f;
    gd.addNumericField("Frame_Time(min)", ftime, 5, 15, null);
    float scaling = (float) cal.pixelWidth;
    gd.addNumericField("Pixel_Size(um)", scaling, 5, 15, null);
    boolean norm = true;
    gd.addCheckbox("Normalize_Vector_lengths?", norm);
    boolean centered = true;
    gd.addCheckbox("Center_Vectors?", centered);
    float magthresh = 0.0f;
    gd.addNumericField("Magnitude_Threshhold?", magthresh, 5, 15, null);
    int rlength = 10;
    gd.addNumericField("Running_avg_length", rlength, 0);
    int inc = 5;
    gd.addNumericField("Start_frame_increment", inc, 0);
    gd.showDialog();
    if (gd.wasCanceled()) {
      return;
    }
    subsize = (int) gd.getNextNumber();
    stepsize = (int) gd.getNextNumber();
    shift = (int) gd.getNextNumber();
    xoffset = (float) gd.getNextNumber();
    yoffset = (float) gd.getNextNumber();
    multiplier = (float) gd.getNextNumber();
    ftime = (float) gd.getNextNumber();
    scaling = (float) gd.getNextNumber();
    norm = gd.getNextBoolean();
    centered = gd.getNextBoolean();
    magthresh = (float) gd.getNextNumber();
    rlength = (int) gd.getNextNumber();
    inc = (int) gd.getNextNumber();

    int width = imp.getWidth();
    int xregions = 1 + (int) (((float) width - (float) subsize) / (float) stepsize);
    int newwidth = xregions * subsize;
    int height = imp.getHeight();
    int yregions = 1 + (int) (((float) height - (float) subsize) / (float) stepsize);
    int newheight = yregions * subsize;
    ImageStack stack = imp.getStack();
    int slices = imp.getNSlices();
    int channels = imp.getNChannels();
    int frames = imp.getNFrames();
    if (frames == 1) {
      frames = slices;
      slices = 1;
    }

    Roi roi = imp.getRoi();
    if (roi == null) {
      roi = new Roi(0, 0, width, height);
    }

    STICS_map map = new STICS_map(subsize, stepsize);
    Object[] tseries = jutils.get3DTSeries(stack, 0, 0, frames, slices, channels);
    map.update_STICS_map(tseries, width, height, 0, rlength, roi.getPolygon(), shift);
    FloatProcessor fp =
        map.get_map(scaling, ftime, stepsize, centered, norm, multiplier, stepsize, magthresh);
    ImageStack vector_stack = new ImageStack(fp.getWidth(), fp.getHeight());
    vector_stack.addSlice("", fp);
    float[][] vel = map.get_scaled_velocities(scaling, ftime, stepsize);
    ImageStack velstack = new ImageStack(map.xregions, map.yregions);
    velstack.addSlice("", vel[0]);
    velstack.addSlice("", vel[1]);
    int velframes = 2;
    IJ.showStatus("frame " + 0 + " calculated");
    for (int i = inc; i < (frames - rlength); i += inc) {
      map.update_STICS_map(tseries, width, height, i, rlength, roi.getPolygon(), shift);
      FloatProcessor fp2 =
          map.get_map(scaling, ftime, stepsize, centered, norm, multiplier, stepsize, magthresh);
      vector_stack.addSlice("", fp2);
      vel = map.get_scaled_velocities(scaling, ftime, stepsize);
      velstack.addSlice("", vel[0]);
      velstack.addSlice("", vel[1]);
      velframes += 2;
      IJ.showStatus("frame " + i + " calculated");
    }
    (new ImagePlus("STICS Vectors", vector_stack)).show();
    ImagePlus imp3 = new ImagePlus("Velocities", velstack);
    imp3.setOpenAsHyperStack(true);
    imp3.setDimensions(2, 1, velframes / 2);
    new CompositeImage(imp3, CompositeImage.COLOR).show();
  }