private void checkCompressedTextureExtensions(TextureData data) {
GL gl = GLU.getCurrentGL();
if (data.isDataCompressed()) {
switch (data.getInternalFormat()) {
case GL.GL_COMPRESSED_RGB_S3TC_DXT1_EXT:
case GL.GL_COMPRESSED_RGBA_S3TC_DXT1_EXT:
case GL.GL_COMPRESSED_RGBA_S3TC_DXT3_EXT:
case GL.GL_COMPRESSED_RGBA_S3TC_DXT5_EXT:
if (!gl.isExtensionAvailable("GL_EXT_texture_compression_s3tc")
&& !gl.isExtensionAvailable("GL_NV_texture_compression_vtc")) {
throw new GLException("DXTn compressed textures not supported by this graphics card");
}
break;
default:
// FIXME: should test availability of more texture
// compression extensions here
break;
}
}
}
/**
* Updates a subregion of the content area of this texture using the specified sub-region of the
* given data. If automatic mipmap generation is in use (see {@link #isUsingAutoMipmapGeneration
* isUsingAutoMipmapGeneration}), updates to the base (level 0) mipmap will cause the lower-level
* mipmaps to be regenerated, and updates to other mipmap levels will be ignored. Otherwise, if
* automatic mipmap generation is not in use, only updates the specified mipmap level and does not
* re-generate mipmaps if they were originally produced or loaded. This method is only supported
* for uncompressed TextureData sources.
*
* @param data the image data to be uploaded to this texture
* @param mipmapLevel the mipmap level of the texture to set. If this is non-zero and the
* TextureData contains mipmap data, the appropriate mipmap level will be selected.
* @param dstx the x offset (in pixels) relative to the lower-left corner of this texture where
* the update will be applied
* @param dsty the y offset (in pixels) relative to the lower-left corner of this texture where
* the update will be applied
* @param srcx the x offset (in pixels) relative to the lower-left corner of the supplied
* TextureData from which to fetch the update rectangle
* @param srcy the y offset (in pixels) relative to the lower-left corner of the supplied
* TextureData from which to fetch the update rectangle
* @param width the width (in pixels) of the rectangle to be updated
* @param height the height (in pixels) of the rectangle to be updated
* @throws GLException if no OpenGL context was current or if any OpenGL-related errors occurred
*/
public void updateSubImage(
TextureData data,
int mipmapLevel,
int dstx,
int dsty,
int srcx,
int srcy,
int width,
int height)
throws GLException {
if (data.isDataCompressed()) {
throw new GLException(
"updateSubImage specifying a sub-rectangle is not supported for compressed TextureData");
}
if (usingAutoMipmapGeneration && mipmapLevel != 0) {
// When we're using mipmap generation via GL_GENERATE_MIPMAP, we
// don't need to update other mipmap levels
return;
}
bind();
updateSubImageImpl(data, target, mipmapLevel, dstx, dsty, srcx, srcy, width, height);
}
private void updateSubImageImpl(
TextureData data,
int newTarget,
int mipmapLevel,
int dstx,
int dsty,
int srcx,
int srcy,
int width,
int height)
throws GLException {
GL gl = GLU.getCurrentGL();
data.setHaveEXTABGR(gl.isExtensionAvailable("GL_EXT_abgr"));
data.setHaveGL12(gl.isExtensionAvailable("GL_VERSION_1_2"));
Buffer buffer = data.getBuffer();
if (buffer == null && data.getMipmapData() == null) {
// Assume user just wanted to get the Texture object allocated
return;
}
int rowlen = data.getRowLength();
int dataWidth = data.getWidth();
int dataHeight = data.getHeight();
if (data.getMipmapData() != null) {
// Compute the width, height and row length at the specified mipmap level
// Note we do not support specification of the row length for
// mipmapped textures at this point
for (int i = 0; i < mipmapLevel; i++) {
width = Math.max(width / 2, 1);
height = Math.max(height / 2, 1);
dataWidth = Math.max(dataWidth / 2, 1);
dataHeight = Math.max(dataHeight / 2, 1);
}
rowlen = 0;
buffer = data.getMipmapData()[mipmapLevel];
}
// Clip incoming rectangles to what is available both on this
// texture and in the incoming TextureData
if (srcx < 0) {
width += srcx;
srcx = 0;
}
if (srcy < 0) {
height += srcy;
srcy = 0;
}
// NOTE: not sure whether the following two are the correct thing to do
if (dstx < 0) {
width += dstx;
dstx = 0;
}
if (dsty < 0) {
height += dsty;
dsty = 0;
}
if (srcx + width > dataWidth) {
width = dataWidth - srcx;
}
if (srcy + height > dataHeight) {
height = dataHeight - srcy;
}
if (dstx + width > texWidth) {
width = texWidth - dstx;
}
if (dsty + height > texHeight) {
height = texHeight - dsty;
}
checkCompressedTextureExtensions(data);
if (data.isDataCompressed()) {
gl.glCompressedTexSubImage2D(
newTarget,
mipmapLevel,
dstx,
dsty,
width,
height,
data.getInternalFormat(),
buffer.remaining(),
buffer);
} else {
int[] align = new int[1];
int[] rowLength = new int[1];
int[] skipRows = new int[1];
int[] skipPixels = new int[1];
gl.glGetIntegerv(GL.GL_UNPACK_ALIGNMENT, align, 0); // save alignment
gl.glGetIntegerv(GL.GL_UNPACK_ROW_LENGTH, rowLength, 0); // save row length
gl.glGetIntegerv(GL.GL_UNPACK_SKIP_ROWS, skipRows, 0); // save skipped rows
gl.glGetIntegerv(GL.GL_UNPACK_SKIP_PIXELS, skipPixels, 0); // save skipped pixels
gl.glPixelStorei(GL.GL_UNPACK_ALIGNMENT, data.getAlignment());
if (DEBUG && VERBOSE) {
System.out.println("Row length = " + rowlen);
System.out.println("skip pixels = " + srcx);
System.out.println("skip rows = " + srcy);
System.out.println("dstx = " + dstx);
System.out.println("dsty = " + dsty);
System.out.println("width = " + width);
System.out.println("height = " + height);
}
gl.glPixelStorei(GL.GL_UNPACK_ROW_LENGTH, rowlen);
gl.glPixelStorei(GL.GL_UNPACK_SKIP_ROWS, srcy);
gl.glPixelStorei(GL.GL_UNPACK_SKIP_PIXELS, srcx);
gl.glTexSubImage2D(
newTarget,
mipmapLevel,
dstx,
dsty,
width,
height,
data.getPixelFormat(),
data.getPixelType(),
buffer);
gl.glPixelStorei(GL.GL_UNPACK_ALIGNMENT, align[0]); // restore alignment
gl.glPixelStorei(GL.GL_UNPACK_ROW_LENGTH, rowLength[0]); // restore row length
gl.glPixelStorei(GL.GL_UNPACK_SKIP_ROWS, skipRows[0]); // restore skipped rows
gl.glPixelStorei(GL.GL_UNPACK_SKIP_PIXELS, skipPixels[0]); // restore skipped pixels
}
}
/**
* Updates the content area of the specified target of this texture using the data in the given
* image. In general this is intended for construction of cube maps.
*
* @throws GLException if no OpenGL context was current or if any OpenGL-related errors occurred
*/
public void updateImage(TextureData data, int target) throws GLException {
GL gl = GLU.getCurrentGL();
imgWidth = data.getWidth();
imgHeight = data.getHeight();
aspectRatio = (float) imgWidth / (float) imgHeight;
mustFlipVertically = data.getMustFlipVertically();
int texTarget = 0;
int texParamTarget = this.target;
// See whether we have automatic mipmap generation support
boolean haveAutoMipmapGeneration =
(gl.isExtensionAvailable("GL_VERSION_1_4")
|| gl.isExtensionAvailable("GL_SGIS_generate_mipmap"));
// Indicate to the TextureData what functionality is available
data.setHaveEXTABGR(gl.isExtensionAvailable("GL_EXT_abgr"));
data.setHaveGL12(gl.isExtensionAvailable("GL_VERSION_1_2"));
// Note that automatic mipmap generation doesn't work for
// GL_ARB_texture_rectangle
if ((!isPowerOfTwo(imgWidth) || !isPowerOfTwo(imgHeight)) && !haveNPOT(gl)) {
haveAutoMipmapGeneration = false;
}
boolean expandingCompressedTexture = false;
if (data.getMipmap() && !haveAutoMipmapGeneration) {
// GLU always scales the texture's dimensions to be powers of
// two. It also doesn't really matter exactly what the texture
// width and height are because the texture coords are always
// between 0.0 and 1.0.
imgWidth = nextPowerOfTwo(imgWidth);
imgHeight = nextPowerOfTwo(imgHeight);
texWidth = imgWidth;
texHeight = imgHeight;
texTarget = GL.GL_TEXTURE_2D;
} else if ((isPowerOfTwo(imgWidth) && isPowerOfTwo(imgHeight)) || haveNPOT(gl)) {
if (DEBUG) {
if (isPowerOfTwo(imgWidth) && isPowerOfTwo(imgHeight)) {
System.err.println("Power-of-two texture");
} else {
System.err.println("Using GL_ARB_texture_non_power_of_two");
}
}
texWidth = imgWidth;
texHeight = imgHeight;
texTarget = GL.GL_TEXTURE_2D;
} else if (haveTexRect(gl) && !data.isDataCompressed()) {
// GL_ARB_texture_rectangle does not work for compressed textures
if (DEBUG) {
System.err.println("Using GL_ARB_texture_rectangle");
}
texWidth = imgWidth;
texHeight = imgHeight;
texTarget = GL.GL_TEXTURE_RECTANGLE_ARB;
} else {
// If we receive non-power-of-two compressed texture data and
// don't have true hardware support for compressed textures, we
// can fake this support by producing an empty "compressed"
// texture image, using glCompressedTexImage2D with that to
// allocate the texture, and glCompressedTexSubImage2D with the
// incoming data.
if (data.isDataCompressed()) {
if (data.getMipmapData() != null) {
// We don't currently support expanding of compressed,
// mipmapped non-power-of-two textures to the nearest power
// of two; the obvious port of the non-mipmapped code didn't
// work
throw new GLException(
"Mipmapped non-power-of-two compressed textures only supported on OpenGL 2.0 hardware (GL_ARB_texture_non_power_of_two)");
}
expandingCompressedTexture = true;
}
if (DEBUG) {
System.err.println("Expanding texture to power-of-two dimensions");
}
if (data.getBorder() != 0) {
throw new RuntimeException(
"Scaling up a non-power-of-two texture which has a border won't work");
}
texWidth = nextPowerOfTwo(imgWidth);
texHeight = nextPowerOfTwo(imgHeight);
texTarget = GL.GL_TEXTURE_2D;
}
texParamTarget = texTarget;
setImageSize(imgWidth, imgHeight, texTarget);
if (target != 0) {
// Allow user to override auto detection and skip bind step (for
// cubemap construction)
texTarget = target;
if (this.target == 0) {
throw new GLException("Override of target failed; no target specified yet");
}
texParamTarget = this.target;
gl.glBindTexture(texParamTarget, texID);
} else {
gl.glBindTexture(texTarget, texID);
}
if (data.getMipmap() && !haveAutoMipmapGeneration) {
int[] align = new int[1];
gl.glGetIntegerv(GL.GL_UNPACK_ALIGNMENT, align, 0); // save alignment
gl.glPixelStorei(GL.GL_UNPACK_ALIGNMENT, data.getAlignment());
if (data.isDataCompressed()) {
throw new GLException("May not request mipmap generation for compressed textures");
}
try {
GLU glu = new GLU();
glu.gluBuild2DMipmaps(
texTarget,
data.getInternalFormat(),
data.getWidth(),
data.getHeight(),
data.getPixelFormat(),
data.getPixelType(),
data.getBuffer());
} finally {
gl.glPixelStorei(GL.GL_UNPACK_ALIGNMENT, align[0]); // restore alignment
}
} else {
checkCompressedTextureExtensions(data);
Buffer[] mipmapData = data.getMipmapData();
if (mipmapData != null) {
int width = texWidth;
int height = texHeight;
for (int i = 0; i < mipmapData.length; i++) {
if (data.isDataCompressed()) {
// Need to use glCompressedTexImage2D directly to allocate and fill this image
// Avoid spurious memory allocation when possible
gl.glCompressedTexImage2D(
texTarget,
i,
data.getInternalFormat(),
width,
height,
data.getBorder(),
mipmapData[i].remaining(),
mipmapData[i]);
} else {
// Allocate texture image at this level
gl.glTexImage2D(
texTarget,
i,
data.getInternalFormat(),
width,
height,
data.getBorder(),
data.getPixelFormat(),
data.getPixelType(),
null);
updateSubImageImpl(data, texTarget, i, 0, 0, 0, 0, data.getWidth(), data.getHeight());
}
width = Math.max(width / 2, 1);
height = Math.max(height / 2, 1);
}
} else {
if (data.isDataCompressed()) {
if (!expandingCompressedTexture) {
// Need to use glCompressedTexImage2D directly to allocate and fill this image
// Avoid spurious memory allocation when possible
gl.glCompressedTexImage2D(
texTarget,
0,
data.getInternalFormat(),
texWidth,
texHeight,
data.getBorder(),
data.getBuffer().capacity(),
data.getBuffer());
} else {
ByteBuffer buf =
DDSImage.allocateBlankBuffer(texWidth, texHeight, data.getInternalFormat());
gl.glCompressedTexImage2D(
texTarget,
0,
data.getInternalFormat(),
texWidth,
texHeight,
data.getBorder(),
buf.capacity(),
buf);
updateSubImageImpl(data, texTarget, 0, 0, 0, 0, 0, data.getWidth(), data.getHeight());
}
} else {
if (data.getMipmap() && haveAutoMipmapGeneration) {
// For now, only use hardware mipmapping for uncompressed 2D
// textures where the user hasn't explicitly specified
// mipmap data; don't know about interactions between
// GL_GENERATE_MIPMAP and glCompressedTexImage2D
gl.glTexParameteri(texParamTarget, GL.GL_GENERATE_MIPMAP, GL.GL_TRUE);
usingAutoMipmapGeneration = true;
}
gl.glTexImage2D(
texTarget,
0,
data.getInternalFormat(),
texWidth,
texHeight,
data.getBorder(),
data.getPixelFormat(),
data.getPixelType(),
null);
updateSubImageImpl(data, texTarget, 0, 0, 0, 0, 0, data.getWidth(), data.getHeight());
}
}
}
int minFilter = (data.getMipmap() ? GL.GL_LINEAR_MIPMAP_LINEAR : GL.GL_LINEAR);
int magFilter = GL.GL_LINEAR;
int wrapMode = (gl.isExtensionAvailable("GL_VERSION_1_2") ? GL.GL_CLAMP_TO_EDGE : GL.GL_CLAMP);
// REMIND: figure out what to do for GL_TEXTURE_RECTANGLE_ARB
if (texTarget != GL.GL_TEXTURE_RECTANGLE_ARB) {
gl.glTexParameteri(texParamTarget, GL.GL_TEXTURE_MIN_FILTER, minFilter);
gl.glTexParameteri(texParamTarget, GL.GL_TEXTURE_MAG_FILTER, magFilter);
gl.glTexParameteri(texParamTarget, GL.GL_TEXTURE_WRAP_S, wrapMode);
gl.glTexParameteri(texParamTarget, GL.GL_TEXTURE_WRAP_T, wrapMode);
if (this.target == GL.GL_TEXTURE_CUBE_MAP) {
gl.glTexParameteri(texParamTarget, GL.GL_TEXTURE_WRAP_R, wrapMode);
}
}
// Don't overwrite target if we're loading e.g. faces of a cube
// map
if ((this.target == 0)
|| (this.target == GL.GL_TEXTURE_2D)
|| (this.target == GL.GL_TEXTURE_RECTANGLE_ARB)) {
this.target = texTarget;
}
// This estimate will be wrong for cube maps
estimatedMemorySize = data.getEstimatedMemorySize();
}