Пример #1
0
 /**
  * 判断是否超出策略阀值
  *
  * @param policyType 1:系统功耗,2:CPU功耗,3:内存功耗,4:进风口温度
  * @param policyLimt 阀值
  * @return
  * @author zhangjh 新增日期:2012-9-5
  * @since ipmi_task
  */
 private boolean overPolicyLimit(SerInfo ser, int policyType, int policyLimt) {
   int current = 0;
   if (policyType == 4) {
     CompositeConfiguration conf = Config.getConfig();
     GobblerServer gobblerServer =
         new GobblerServer(
             conf.getString("gobbler.host"),
             conf.getString("gobbler.user"),
             conf.getString("gobbler.passwd"));
     current = ipmiSensor.getTempSensorReading(ser, gobblerServer, Parameter.InletTemp);
   } else {
     PowerReading p = ipmiPower.getPlatformPowerReading(ser, policyType2Domain(policyType));
     current = p.getCurrent();
   }
   if (current >= policyLimt) {
     logger.info(
         "4.["
             + ser.getHost()
             + "]的当前"
             + policyType2Name(policyType)
             + "为<"
             + current
             + ">,阀值为<"
             + policyLimt
             + ">,已超过阀值.");
     return true;
   } else {
     logger.info(
         "4.["
             + ser.getHost()
             + "]的当前"
             + policyType2Name(policyType)
             + "为<"
             + current
             + ">,阀值为<"
             + policyLimt
             + ">,未超过阀值,退出.");
     return false;
   }
 }
Пример #2
0
/**
 * 管理策略任务(包括功耗CPU内存和出风口策略)
 *
 * @author zhangjh 新增日期:2012-9-5
 * @since ipmi_task
 */
@Service("policyService")
public class PolicyService {
  @Autowired(required = true)
  private TbServerDAO tbServerDAO;

  @Autowired(required = true)
  private PolicyDAO policyDAO;

  @Autowired(required = true)
  private PolicyServerDAO policyServerDAO;

  private static Policy ipmiPolicy = Policy.getSingleInstance();
  private static Power ipmiPower = Power.getSingleInstance();
  private static Sensor ipmiSensor = Sensor.getSingleInstance();
  private static final Logger logger = Logger.getLogger(PolicyService.class);

  /**
   * 管理策略的开启与关闭
   *
   * <p>1.查询所有的策略<br>
   * 2.判断是否在时间段范围内<br>
   * 3.在时间段范围外则把该策略关联的服务器的对应策略设置为关闭<br>
   * 4.在时间段范围内则判断该策略关联的服务器的阀值是否达到?<br>
   * 5.未超过阀值则不处理<br>
   * 6.超过阀值则创建/设置对应的策略的值,然后使该策略打开<br>
   *
   * <p>策略分为:电源功耗策略,CPU功耗策略,内存策略,进风口温度策略<br>
   * 进风口温度策略逻辑:<br>
   * 通过传感器获取进风口温度,判断是否大于设置的阀值,如果大于则把功耗降低到当前功耗的15%,<br>
   * 假设当前功耗为300W,300W * 0.15 = 45W,300-45 = 255W,如此类推.
   *
   * @author zhangjh 新增日期:2012-9-5
   * @since ipmi_task
   */
  public void run() {
    List<TbPolicy> policyList = policyDAO.findAll();
    int startHour;
    int startMinute;
    int endHour;
    int endMinute;
    for (TbPolicy policy : policyList) {
      startHour = Integer.parseInt(policy.getPolicyStartHour());
      startMinute = Integer.parseInt(policy.getPolicyStartMinute());
      endHour = Integer.parseInt(policy.getPolicyEndHour());
      endMinute = Integer.parseInt(policy.getPolicyEndMinute());
      logger.info(
          "----------------------------------------------------------------------------------");
      boolean isTimeRange = inTimeRange(startHour, startMinute, endHour, endMinute);
      logger.info(
          "1.policy.id:"
              + policy.getId()
              + ",policy.name:"
              + policy.getPolicyName()
              + ",isTimeRange:"
              + isTimeRange);
      @SuppressWarnings("unchecked")
      List<Object[]> serverList = policyServerDAO.queryServerByPolicyId(policy.getId());
      logger.info(
          "2.扫描绑定<" + policy.getPolicyName() + ">的服务器列表,一共已绑定<" + serverList.size() + ">台服务器.");
      if (serverList.size() <= 0) {
        logger.info("3.无绑定任务服务器,退出.");
        continue;
      }
      if (isTimeRange) {
        // 在时间段范围内的策略
        logger.info("3.策略在指定时间段范围内,裁定生效.下面开始扫描并判断阀值,若达到阀值则触发启动策略.");
        enablePolicy(serverList, policy);
      } else {
        // 时间段范围外的策略
        logger.info("3.策略不在指定时间段范围内,裁定失效.下面开始扫描并关闭策略.");
        closePolicy(serverList, policy);
      }
    }
  }

  /**
   * 判断服务器的当前值是否大于阀值,是则打开策略,降低功耗
   *
   * @param serverList
   * @param p
   * @author zhangjh 新增日期:2012-9-5
   * @since ipmi_task
   */
  private void enablePolicy(List<Object[]> serverList, TbPolicy p) {
    for (Object[] cc : serverList) {
      TbPolicySever serverPolicy = (TbPolicySever) cc[0];
      TbServer server = (TbServer) cc[1];
      SerInfo ser = new SerInfo();
      ser.setHost(server.getIdracIp());
      ser.setUser(server.getIdracUser());
      ser.setPasswd(server.getIdracPassword());
      if (p.getPolicyType() == 4) {
        boolean isOver = overPolicyLimit(ser, p.getPolicyType(), p.getPolicyLimit());
        if (!isOver) {
          continue;
        }
      }
      PolicyEntity policyEntity =
          ipmiPolicy.getPolicyById(
              ser, serverPolicy.getPolicyidInServer(), policyType2Domain(p.getPolicyType()));

      if (policyEntity != null
          && p.getPolicyType() != 4
          && policyEntity.getPolicyLimit() == p.getPolicyLimit()
          && policyEntity.isPolicyEnabled()) {
        continue;
      }
      int policyLimit = p.getPolicyLimit();
      // 当为入风口温度策略时,把策略阀值降低到当前功耗的百分几
      if (p.getPolicyType() == 4) {
        PowerReading powerReading =
            ipmiPower.getPlatformPowerReading(ser, policyType2Domain(p.getPolicyType()));
        policyLimit = powerReading.getCurrent() * (100 - p.getPolicyBumber()) / 100;
      }
      if (policyEntity != null) {
        policyEntity.setPolicyEnabled(true);
        policyEntity.setPolicyLimit(policyLimit);
        policyEntity.setPolicyTriggerLimit(policyLimit);
      } else {
        policyEntity = new PolicyEntity();
        policyEntity.setPolicyId(serverPolicy.getPolicyidInServer());
        policyEntity.setPolicyType(Parameter.policyPower);
        policyEntity.setPolicyEnabled(true);
        policyEntity.setComponent(policyType2Domain(p.getPolicyType()));
        policyEntity.setSendAlert(false);
        policyEntity.setShutdown(false);
        policyEntity.setStatReportingPeriod(10);
        policyEntity.setCorrectionTime(1000L);
        policyEntity.setPolicyTriggerLimit(policyLimit);
        policyEntity.setPolicyLimit(policyLimit);
      }
      serverPolicy.setBiningType(policyEntity.getPolicyType());
      serverPolicy.setBiningState(1);
      policyServerDAO.saveOrUpdate(serverPolicy);
      ipmiPolicy.setPolicy(ser, policyEntity);
      logger.info(
          "5.设置["
              + ser.getHost()
              + "]的<"
              + p.getPolicyName()
              + ">("
              + policyType2Name(p.getPolicyType())
              + ")策略,策略ID为<"
              + policyEntity.getPolicyId()
              + ">,阀值设定为<"
              + policyEntity.getPolicyLimit()
              + ">,策略状态设置为开启.");
    }
    logger.info("6.启动绑定该策略的所有服务器(前提超过阀值),完毕!");
  }

  /**
   * 关闭服务器上的策略
   *
   * @param serverList
   * @author zhangjh 新增日期:2012-9-5
   * @since ipmi_task
   */
  private void closePolicy(List<Object[]> serverList, TbPolicy p) {
    for (Object[] cc : serverList) {
      TbPolicySever serverPolicy = (TbPolicySever) cc[0];
      TbServer server = (TbServer) cc[1];
      SerInfo ser = new SerInfo();
      ser.setHost(server.getIdracIp());
      ser.setUser(server.getIdracUser());
      ser.setPasswd(server.getIdracPassword());
      PolicyEntity e =
          ipmiPolicy.getPolicyById(
              ser, serverPolicy.getPolicyidInServer(), policyType2Domain(p.getPolicyType()));
      if (e == null) {
        logger.info(
            "4.[" + ser.getHost() + "]的<" + serverPolicy.getPolicyidInServer() + ">策略未建立,不必关闭.");
        continue;
      }
      if (e.isPolicyEnabled()) {
        ipmiPolicy.setPolicyStatus(
            ser, serverPolicy.getPolicyidInServer(), false, policyType2Domain(p.getPolicyType()));
        logger.info(
            "4.设置["
                + ser.getHost()
                + "]的<"
                + p.getPolicyName()
                + ">("
                + policyType2Name(p.getPolicyType())
                + ")策略,策略ID为<"
                + e.getPolicyId()
                + ">,,策略状态设置为关闭.");
      }
      if (serverPolicy.getBiningState() != 0) {
        serverPolicy.setBiningType(e.getPolicyType());
        serverPolicy.setBiningState(0);
        policyServerDAO.saveOrUpdate(serverPolicy);
      }
    }
    logger.info("5.关闭绑定该策略的所有服务器,完毕!");
  }

  /**
   * 策略类型转domain
   *
   * @param policyType 1: 系统 2:CPU 3:内存 4:入风口温度
   * @return
   * @author zhangjh 新增日期:2012-9-5
   * @since ipmi_task
   */
  private int policyType2Domain(int policyType) {
    int domain = 0;
    if (policyType == 2) {
      domain = 1;
    } else if (policyType == 3) {
      domain = 2;
    }
    return domain;
  }

  /**
   * 判断是否在时间段范围内
   *
   * <p>当startHour - endHour大于或等于12,则endTime加一天
   *
   * <p>
   *
   * @param startHour
   * @param startMinute
   * @param endHour
   * @param endMinute
   * @return boolean
   * @author zhangjh 新增日期:2012-9-5
   * @since ipmi_task
   */
  private boolean inTimeRange(int startHour, int startMinute, int endHour, int endMinute) {
    Calendar nowTime = Calendar.getInstance(); // 现在的时间
    Calendar startTime = Calendar.getInstance(); // 开始的时间
    startTime.set(Calendar.HOUR_OF_DAY, startHour);
    startTime.set(Calendar.MINUTE, startMinute);
    startTime.set(Calendar.MILLISECOND, 0);
    Calendar endTime = Calendar.getInstance(); // 结束的时间
    if (endHour < startHour) {
      endTime.add(Calendar.DATE, 1);
    }
    if (endHour == startHour && startMinute >= endMinute) {
      endTime.add(Calendar.DATE, 1);
    }
    endTime.set(Calendar.HOUR_OF_DAY, endHour);
    endTime.set(Calendar.MINUTE, endMinute);
    endTime.set(Calendar.MILLISECOND, 59);

    logger.info(
        "现在的时间:"
            + nowTime.get(Calendar.YEAR)
            + "-"
            + nowTime.get(Calendar.MONTH)
            + "-"
            + nowTime.get(Calendar.DAY_OF_MONTH)
            + " "
            + nowTime.get(Calendar.HOUR_OF_DAY)
            + ":"
            + nowTime.get(Calendar.MINUTE));
    logger.info(
        "开始的时间:"
            + startTime.get(Calendar.YEAR)
            + "-"
            + startTime.get(Calendar.MONTH)
            + "-"
            + startTime.get(Calendar.DAY_OF_MONTH)
            + " "
            + startTime.get(Calendar.HOUR_OF_DAY)
            + ":"
            + startTime.get(Calendar.MINUTE));
    logger.info(
        "结束的时间:"
            + endTime.get(Calendar.YEAR)
            + "-"
            + endTime.get(Calendar.MONTH)
            + "-"
            + endTime.get(Calendar.DAY_OF_MONTH)
            + " "
            + endTime.get(Calendar.HOUR_OF_DAY)
            + ":"
            + endTime.get(Calendar.MINUTE));

    if (nowTime.compareTo(startTime) >= 0 && nowTime.compareTo(endTime) <= 0) {
      return true;
    }
    return false;
  }

  /**
   * 判断是否超出策略阀值
   *
   * @param policyType 1:系统功耗,2:CPU功耗,3:内存功耗,4:进风口温度
   * @param policyLimt 阀值
   * @return
   * @author zhangjh 新增日期:2012-9-5
   * @since ipmi_task
   */
  private boolean overPolicyLimit(SerInfo ser, int policyType, int policyLimt) {
    int current = 0;
    if (policyType == 4) {
      CompositeConfiguration conf = Config.getConfig();
      GobblerServer gobblerServer =
          new GobblerServer(
              conf.getString("gobbler.host"),
              conf.getString("gobbler.user"),
              conf.getString("gobbler.passwd"));
      current = ipmiSensor.getTempSensorReading(ser, gobblerServer, Parameter.InletTemp);
    } else {
      PowerReading p = ipmiPower.getPlatformPowerReading(ser, policyType2Domain(policyType));
      current = p.getCurrent();
    }
    if (current >= policyLimt) {
      logger.info(
          "4.["
              + ser.getHost()
              + "]的当前"
              + policyType2Name(policyType)
              + "为<"
              + current
              + ">,阀值为<"
              + policyLimt
              + ">,已超过阀值.");
      return true;
    } else {
      logger.info(
          "4.["
              + ser.getHost()
              + "]的当前"
              + policyType2Name(policyType)
              + "为<"
              + current
              + ">,阀值为<"
              + policyLimt
              + ">,未超过阀值,退出.");
      return false;
    }
  }

  /**
   * 转换TbPolicy.policyType的类型名字
   *
   * @param type 1: 系统 2:CPU 3:内存 4:入风口温度
   * @return
   * @author zhangjh 新增日期:2012-9-7
   * @since ipmi_task
   */
  private String policyType2Name(int type) {
    String name = "未知策略";
    switch (type) {
      case 1:
        name = "系统功耗";
        break;
      case 2:
        name = "CPU功耗";
        break;
      case 3:
        name = "内存功耗";
        break;
      case 4:
        name = "入风口温度";
        break;
      default:
        break;
    }
    return name;
  }
}
Пример #3
0
  /**
   * 判断服务器的当前值是否大于阀值,是则打开策略,降低功耗
   *
   * @param serverList
   * @param p
   * @author zhangjh 新增日期:2012-9-5
   * @since ipmi_task
   */
  private void enablePolicy(List<Object[]> serverList, TbPolicy p) {
    for (Object[] cc : serverList) {
      TbPolicySever serverPolicy = (TbPolicySever) cc[0];
      TbServer server = (TbServer) cc[1];
      SerInfo ser = new SerInfo();
      ser.setHost(server.getIdracIp());
      ser.setUser(server.getIdracUser());
      ser.setPasswd(server.getIdracPassword());
      if (p.getPolicyType() == 4) {
        boolean isOver = overPolicyLimit(ser, p.getPolicyType(), p.getPolicyLimit());
        if (!isOver) {
          continue;
        }
      }
      PolicyEntity policyEntity =
          ipmiPolicy.getPolicyById(
              ser, serverPolicy.getPolicyidInServer(), policyType2Domain(p.getPolicyType()));

      if (policyEntity != null
          && p.getPolicyType() != 4
          && policyEntity.getPolicyLimit() == p.getPolicyLimit()
          && policyEntity.isPolicyEnabled()) {
        continue;
      }
      int policyLimit = p.getPolicyLimit();
      // 当为入风口温度策略时,把策略阀值降低到当前功耗的百分几
      if (p.getPolicyType() == 4) {
        PowerReading powerReading =
            ipmiPower.getPlatformPowerReading(ser, policyType2Domain(p.getPolicyType()));
        policyLimit = powerReading.getCurrent() * (100 - p.getPolicyBumber()) / 100;
      }
      if (policyEntity != null) {
        policyEntity.setPolicyEnabled(true);
        policyEntity.setPolicyLimit(policyLimit);
        policyEntity.setPolicyTriggerLimit(policyLimit);
      } else {
        policyEntity = new PolicyEntity();
        policyEntity.setPolicyId(serverPolicy.getPolicyidInServer());
        policyEntity.setPolicyType(Parameter.policyPower);
        policyEntity.setPolicyEnabled(true);
        policyEntity.setComponent(policyType2Domain(p.getPolicyType()));
        policyEntity.setSendAlert(false);
        policyEntity.setShutdown(false);
        policyEntity.setStatReportingPeriod(10);
        policyEntity.setCorrectionTime(1000L);
        policyEntity.setPolicyTriggerLimit(policyLimit);
        policyEntity.setPolicyLimit(policyLimit);
      }
      serverPolicy.setBiningType(policyEntity.getPolicyType());
      serverPolicy.setBiningState(1);
      policyServerDAO.saveOrUpdate(serverPolicy);
      ipmiPolicy.setPolicy(ser, policyEntity);
      logger.info(
          "5.设置["
              + ser.getHost()
              + "]的<"
              + p.getPolicyName()
              + ">("
              + policyType2Name(p.getPolicyType())
              + ")策略,策略ID为<"
              + policyEntity.getPolicyId()
              + ">,阀值设定为<"
              + policyEntity.getPolicyLimit()
              + ">,策略状态设置为开启.");
    }
    logger.info("6.启动绑定该策略的所有服务器(前提超过阀值),完毕!");
  }