/** Save all code in the current sketch. */
public boolean save() throws IOException {
// make sure the user didn't hide the sketch folder
ensureExistence();
// first get the contents of the editor text area
if (current.modified) {
current.program = editor.getText();
}
// don't do anything if not actually modified
// if (!modified) return false;
if (isReadOnly()) {
// if the files are read-only, need to first do a "save as".
Base.showMessage(
"Sketch is read-only",
"Some files are marked \"read-only\", so you'll\n"
+ "need to re-save this sketch to another location.");
// if the user cancels, give up on the save()
if (!saveAs()) return false;
}
for (int i = 0; i < codeCount; i++) {
if (code[i].modified) code[i].save();
}
calcModified();
return true;
}
/** Save all code in the current sketch. */
public boolean save() throws IOException {
if (mainFilename == null) {
return saveAs();
}
if (isReadOnly()) {
// if the files are read-only, need to first do a "save as".
Base.showMessage(
"File is read-only",
"This file is marked \"read-only\", so you'll\n"
+ "need to re-save this file to another location.");
// if the user cancels, give up on the save()
if (!saveAs()) return false;
return true;
}
BuildCode code = getCode();
if (code != null) {
if (hasMainWindow) {
if (code.isModified()) {
code.program = editor.getText();
code.save();
}
}
}
BuildModel model = getModel();
if (model != null) {
if (model.isModified()) {
model.save();
}
}
return true;
}
public void hideCode() {
// make sure the user didn't hide the sketch folder
ensureExistence();
// if read-only, give an error
if (isReadOnly()) {
// if the files are read-only, need to first do a "save as".
Base.showMessage(
"Sketch is Read-Only",
"Some files are marked \"read-only\", so you'll\n"
+ "need to re-save the sketch in another location,\n"
+ "and try again.");
return;
}
// don't allow hide of the main code
// TODO maybe gray out the menu on setCurrent(0)
if (currentIndex == 0) {
Base.showMessage(
"Can't do that", "You cannot hide the main " + ".gcode file from a sketch\n");
return;
}
// rename the file
File newFile = new File(current.file.getAbsolutePath() + ".x");
if (!current.file.renameTo(newFile)) {
Base.showWarning("Error", "Could not hide " + "\"" + current.file.getName() + "\".", null);
return;
}
current.file = newFile;
// move it to the hidden list
if (hiddenCount == hidden.length) {
SketchCode temp[] = new SketchCode[hiddenCount + 1];
System.arraycopy(hidden, 0, temp, 0, hiddenCount);
hidden = temp;
}
hidden[hiddenCount++] = current;
// remove it from the main list
removeCode(current);
// update the tabs
setCurrent(0);
editor.header.repaint();
}
public void unhideCode(String what) {
SketchCode unhideCode = null;
String name = what.substring(0, (what.indexOf(".") == -1 ? what.length() : what.indexOf(".")));
String extension = what.indexOf(".") == -1 ? "" : what.substring(what.indexOf("."));
for (int i = 0; i < hiddenCount; i++) {
if (hidden[i].name.equals(name)
&& Sketch.flavorExtensionsShown[hidden[i].flavor].equals(extension)) {
// unhideIndex = i;
unhideCode = hidden[i];
// remove from the 'hidden' list
for (int j = i; j < hiddenCount - 1; j++) {
hidden[j] = hidden[j + 1];
}
hiddenCount--;
break;
}
}
// if (unhideIndex == -1) {
if (unhideCode == null) {
System.err.println("internal error: could find " + what + " to unhide.");
return;
}
if (!unhideCode.file.exists()) {
Base.showMessage("Can't unhide", "The file \"" + what + "\" no longer exists.");
// System.out.println(unhideCode.file);
return;
}
String unhidePath = unhideCode.file.getAbsolutePath();
File unhideFile = new File(unhidePath.substring(0, unhidePath.length() - 2));
if (!unhideCode.file.renameTo(unhideFile)) {
Base.showMessage(
"Can't unhide", "The file \"" + what + "\" could not be" + "renamed and unhidden.");
return;
}
unhideCode.file = unhideFile;
insertCode(unhideCode);
sortCode();
setCurrent(unhideCode.name);
editor.header.repaint();
}
public void newCode() {
// make sure the user didn't hide the sketch folder
ensureExistence();
// if read-only, give an error
if (isReadOnly()) {
// if the files are read-only, need to first do a "save as".
Base.showMessage(
"Sketch is Read-Only",
"Some files are marked \"read-only\", so you'll\n"
+ "need to re-save the sketch in another location,\n"
+ "and try again.");
return;
}
renamingCode = false;
// editor.status.edit("Name for new file:", "");
}
public void renameCode() {
// make sure the user didn't hide the sketch folder
ensureExistence();
// if read-only, give an error
if (isReadOnly()) {
// if the files are read-only, need to first do a "save as".
Base.showMessage(
"Sketch is Read-Only",
"Some files are marked \"read-only\", so you'll\n"
+ "need to re-save the sketch in another location,\n"
+ "and try again.");
return;
}
// ask for new name of file (internal to window)
// TODO maybe just popup a text area?
renamingCode = true;
// editor.status.edit(prompt, oldName);
}
public static void main(String args[]) {
// make sure that this is running on java 1.5 or better.
if (Base.javaVersion < 1.5f) {
Base.quitWithError(
"Need to install Java 1.5",
"This version of ReplicatorG requires\n"
+ "Java 1.5 or later to run properly.\n"
+ "Please visit java.com to upgrade.",
null);
}
if (Base.isMacOS()) {
// Default to sun's XML parser, PLEASE. Some apps are installing some janky-ass xerces.
System.setProperty(
"javax.xml.parsers.DocumentBuilderFactory",
"com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl");
System.setProperty("com.apple.mrj.application.apple.menu.about.name", "ReplicatorG");
}
// parse command line input
for (int i = 0; i < args.length; i++) {
// grab any opened file from the command line
if (supportedExtension(args[i])) {
Base.openedAtStartup = args[i];
}
// Allow for [--debug] [DEBUGLEVEL]
if (args[i].equals("--debug")) {
int debugLevelArg = 2;
if ((i + 1) < args.length) {
try {
debugLevelArg = Integer.parseInt(args[i + 1]);
} catch (NumberFormatException e) {
}
;
}
if (debugLevelArg == 0) {
logger.setLevel(Level.INFO);
logger.info("Debug level is 'INFO'");
} else if (debugLevelArg == 1) {
logger.setLevel(Level.FINE);
logger.info("Debug level is 'FINE'");
} else if (debugLevelArg == 2) {
logger.setLevel(Level.FINER);
logger.info("Debug level is 'FINER'");
} else if (debugLevelArg == 3) {
logger.setLevel(Level.FINEST);
logger.info("Debug level is 'FINEST'");
} else if (debugLevelArg >= 4) {
logger.setLevel(Level.ALL);
logger.info("Debug level is 'ALL'");
}
} else if (args[i].startsWith("-")) {
System.out.println("Usage: ./replicatorg [[--debug] [DEBUGLEVEL]] [filename.stl]");
System.exit(1);
}
}
// Warn about read-only directories
{
File userDir = getUserDirectory();
String header = null;
if (!userDir.exists()) header = new String("Unable to create user directory");
else if (!userDir.canWrite()) header = new String("Unable to write to user directory");
else if (!userDir.isDirectory()) header = new String("User directory must be a directory");
if (header != null) {
Base.showMessage(
header,
"<html><body>ReplicatorG can not write to the directory "
+ userDir.getAbsolutePath()
+ ".<br>"
+ "Some functions of ReplicatorG, like toolpath generation and firmware updates,<br>"
+ "require ReplicatorG to write data to this directory. You should end this<br>"
+ "session, change the permissions on this directory, and start again.");
}
}
// Use the default system proxy settings
System.setProperty("java.net.useSystemProxies", "true");
// Use antialiasing implicitly
System.setProperty("j3d.implicitAntialiasing", "true");
// Start the firmware check thread.
FirmwareUploader.checkFirmware();
// MAC OS X ONLY:
// register a temporary/early version of the mrj open document handler,
// because the event may be lost (sometimes, not always) by the time
// that MainWindow is properly constructed.
MRJOpenDocumentHandler startupOpen =
new MRJOpenDocumentHandler() {
public void handleOpenFile(File file) {
// this will only get set once.. later will be handled
// by the MainWindow version of this fella
if (Base.openedAtStartup == null) {
Base.openedAtStartup = file.getAbsolutePath();
}
}
};
MRJApplicationUtils.registerOpenDocumentHandler(startupOpen);
// Create the new application "Base" class.
new Base();
}
/** Remove a piece of code from the sketch and from the disk. */
public void deleteCode() {
// make sure the user didn't hide the sketch folder
ensureExistence();
// if read-only, give an error
if (isReadOnly()) {
// if the files are read-only, need to first do a "save as".
Base.showMessage(
"Sketch is Read-Only",
"Some files are marked \"read-only\", so you'll\n"
+ "need to re-save the sketch in another location,\n"
+ "and try again.");
return;
}
// confirm deletion with user, yes/no
Object[] options = {"OK", "Cancel"};
String prompt =
(currentIndex == 0)
? "Are you sure you want to delete this sketch?"
: "Are you sure you want to delete \""
+ current.name
+ flavorExtensionsShown[current.flavor]
+ "\"?";
int result =
JOptionPane.showOptionDialog(
editor,
prompt,
"Delete",
JOptionPane.YES_NO_OPTION,
JOptionPane.QUESTION_MESSAGE,
null,
options,
options[0]);
if (result == JOptionPane.YES_OPTION) {
if (currentIndex == 0) {
// need to unset all the modified flags, otherwise tries
// to do a save on the handleNew()
// delete the entire sketch
Base.removeDir(folder);
// get the changes into the sketchbook menu
// sketchbook.rebuildMenus();
// make a new sketch, and i think this will rebuild the sketch
// menu
editor.handleNewUnchecked();
} else {
// delete the file
if (!current.file.delete()) {
Base.showMessage("Couldn't do it", "Could not delete \"" + current.name + "\".");
return;
}
// remove code from the list
removeCode(current);
// just set current tab to the main tab
setCurrent(0);
// update the tabs
editor.header.repaint();
}
}
}
/**
* This is called upon return from entering a new file name. (that is, from either newCode or
* renameCode after the prompt) This code is almost identical for both the newCode and renameCode
* cases, so they're kept merged except for right in the middle where they diverge.
*/
public void nameCode(String newName) {
// make sure the user didn't hide the sketch folder
ensureExistence();
// if renaming to the same thing as before, just ignore.
// also ignoring case here, because i don't want to write
// a bunch of special stuff for each platform
// (osx is case insensitive but preserving, windows insensitive,
// *nix is sensitive and preserving.. argh)
if (renamingCode && newName.equalsIgnoreCase(current.name)) {
// exit quietly for the 'rename' case.
// if it's a 'new' then an error will occur down below
return;
}
// don't allow blank names
if (newName.trim().equals("")) {
return;
}
if (newName.trim().equals(".gcode")) {
return;
}
String newFilename = null;
int newFlavor = 0;
// separate into newName (no extension) and newFilename (with ext)
// add .gcode to file if it has no extension
if (newName.endsWith(".gcode")) {
newFilename = newName;
newName = newName.substring(0, newName.length() - 6);
newFlavor = GCODE;
} else {
newFilename = newName + ".gcode";
newFlavor = GCODE;
}
// dots are allowed for the .gcode and .java, but not in the name
// make sure the user didn't name things poo.time.gcode
// or something like that (nothing against poo time)
if (newName.indexOf('.') != -1) {
newFilename = newName + ".gcode";
}
// create the new file, new SketchCode object and load it
File newFile = new File(folder, newFilename);
if (newFile.exists()) { // yay! users will try anything
Base.showMessage(
"Nope",
"A file named \""
+ newFile
+ "\" already exists\n"
+ "in \""
+ folder.getAbsolutePath()
+ "\"");
return;
}
File newFileHidden = new File(folder, newFilename + ".x");
if (newFileHidden.exists()) {
// don't let them get away with it if they try to create something
// with the same name as something hidden
Base.showMessage(
"No Way",
"A hidden tab with the same name already exists.\n" + "Use \"Unhide\" to bring it back.");
return;
}
if (renamingCode) {
if (currentIndex == 0) {
// get the new folder name/location
File newFolder = new File(folder.getParentFile(), newName);
if (newFolder.exists()) {
Base.showWarning(
"Cannot Rename",
"Sorry, a sketch (or folder) named " + "\"" + newName + "\" already exists.",
null);
return;
}
// unfortunately this can't be a "save as" because that
// only copies the sketch files and the data folder
// however this *will* first save the sketch, then rename
// first get the contents of the editor text area
if (current.modified) {
current.program = editor.getText();
try {
// save this new SketchCode
current.save();
} catch (Exception e) {
Base.showWarning("Error", "Could not rename the sketch. (0)", e);
return;
}
}
if (!current.file.renameTo(newFile)) {
Base.showWarning(
"Error",
"Could not rename \""
+ current.file.getName()
+ "\" to \""
+ newFile.getName()
+ "\"",
null);
return;
}
// save each of the other tabs because this is gonna be
// re-opened
try {
for (int i = 1; i < codeCount; i++) {
// if (code[i].modified) code[i].save();
code[i].save();
}
} catch (Exception e) {
Base.showWarning("Error", "Could not rename the sketch. (1)", e);
return;
}
// now rename the sketch folder and re-open
boolean success = folder.renameTo(newFolder);
if (!success) {
Base.showWarning("Error", "Could not rename the sketch. (2)", null);
return;
}
// if successful, set base properties for the sketch
File mainFile = new File(newFolder, newName + ".gcode");
mainFilename = mainFile.getAbsolutePath();
// having saved everything and renamed the folder and the main
// .gcode,
// use the editor to re-open the sketch to re-init state
// (unfortunately this will kill positions for carets etc)
editor.handleOpenUnchecked(
mainFilename,
currentIndex,
editor.textarea.getSelectionStart(),
editor.textarea.getSelectionEnd(),
editor.textarea.getScrollPosition());
// get the changes into the sketchbook menu
// (re-enabled in 0115 to fix bug #332)
// editor.sketchbook.rebuildMenus();
} else { // else if something besides code[0]
if (!current.file.renameTo(newFile)) {
Base.showWarning(
"Error",
"Could not rename \""
+ current.file.getName()
+ "\" to \""
+ newFile.getName()
+ "\"",
null);
return;
}
// just reopen the class itself
current.name = newName;
current.file = newFile;
current.flavor = newFlavor;
}
} else { // creating a new file
try {
newFile.createNewFile(); // TODO returns a boolean
} catch (IOException e) {
Base.showWarning(
"Error",
"Could not create the file \""
+ newFile
+ "\"\n"
+ "in \""
+ folder.getAbsolutePath()
+ "\"",
e);
return;
}
SketchCode newCode = new SketchCode(newName, newFile, newFlavor);
insertCode(newCode);
}
// sort the entries
sortCode();
// set the new guy as current
setCurrent(newName + flavorExtensionsShown[newFlavor]);
// update the tabs
// editor.header.repaint();
editor.header.rebuild();
// force the update on the mac?
Toolkit.getDefaultToolkit().sync();
// editor.header.getToolkit().sync();
}
