Exemplo n.º 1
0
 public void setFullscreen(boolean state) {
   if (renderingConfig.isFullscreen() != state) {
     renderingConfig.setFullscreen(state);
     DisplayDevice display = CoreRegistry.get(DisplayDevice.class);
     display.setFullscreen(state);
   }
 }
Exemplo n.º 2
0
  private void initConfig() {
    if (Files.isRegularFile(Config.getConfigFile())) {
      try {
        config = Config.load(Config.getConfigFile());
      } catch (IOException e) {
        logger.error("Failed to load config", e);
        config = new Config();
      }
    } else {
      config = new Config();
    }
    if (!config.getDefaultModSelection().hasModule(TerasologyConstants.CORE_GAMEPLAY_MODULE)) {
      config.getDefaultModSelection().addModule(TerasologyConstants.CORE_GAMEPLAY_MODULE);
    }

    if (!validateServerIdentity()) {
      CertificateGenerator generator = new CertificateGenerator();
      CertificatePair serverIdentity = generator.generateSelfSigned();
      config
          .getSecurity()
          .setServerCredentials(serverIdentity.getPublicCert(), serverIdentity.getPrivateCert());
      config.save();
    }

    renderingConfig = config.getRendering();
    logger.info("Video Settings: " + renderingConfig.toString());
    CoreRegistry.putPermanently(Config.class, config);
  }
Exemplo n.º 3
0
 /**
  * If blur is enabled through the rendering settings, this method generates the images used by the
  * Blur effect when underwater and for the Depth of Field effect when above water.
  *
  * <p>For more information on blur: http://en.wikipedia.org/wiki/Defocus_aberration For more
  * information on DoF: http://en.wikipedia.org/wiki/Depth_of_field
  */
 public void generateBlurPasses() {
   if (renderingConfig.getBlurIntensity() != 0) {
     PerformanceMonitor.startActivity("Generating Blur Passes");
     generateBlur(buffers.sceneBlur0);
     generateBlur(buffers.sceneBlur1);
     PerformanceMonitor.endActivity();
   }
 }
Exemplo n.º 4
0
  // TODO: verify if this can be achieved entirely in the GPU, during tone mapping perhaps?
  public void downsampleSceneAndUpdateExposure() {
    if (renderingConfig.isEyeAdaptation()) {
      PerformanceMonitor.startActivity("Updating exposure");

      downsampleSceneInto1x1pixelsBuffer();

      renderingProcess
          .getCurrentReadbackPBO()
          .copyFromFBO(
              buffers.downSampledScene[0].fboId, 1, 1, GL12.GL_BGRA, GL11.GL_UNSIGNED_BYTE);

      renderingProcess.swapReadbackPBOs();

      ByteBuffer pixels = renderingProcess.getCurrentReadbackPBO().readBackPixels();

      if (pixels.limit() < 3) {
        logger.error("Failed to auto-update the exposure value.");
        return;
      }

      // TODO: make this line more readable by breaking it in smaller pieces
      currentSceneLuminance =
          0.2126f * (pixels.get(2) & 0xFF) / 255.f
              + 0.7152f * (pixels.get(1) & 0xFF) / 255.f
              + 0.0722f * (pixels.get(0) & 0xFF) / 255.f;

      float targetExposure = hdrMaxExposure;

      if (currentSceneLuminance > 0) {
        targetExposure = hdrTargetLuminance / currentSceneLuminance;
      }

      float maxExposure = hdrMaxExposure;

      if (CoreRegistry.get(BackdropProvider.class).getDaylight()
          == 0.0) { // TODO: fetch the backdropProvider earlier and only once
        maxExposure = hdrMaxExposureNight;
      }

      if (targetExposure > maxExposure) {
        targetExposure = maxExposure;
      } else if (targetExposure < hdrMinExposure) {
        targetExposure = hdrMinExposure;
      }

      currentExposure = TeraMath.lerp(currentExposure, targetExposure, hdrExposureAdjustmentSpeed);

    } else {
      if (CoreRegistry.get(BackdropProvider.class).getDaylight() == 0.0) {
        currentExposure = hdrMaxExposureNight;
      } else {
        currentExposure = hdrExposureDefault;
      }
    }
    PerformanceMonitor.endActivity();
  }
Exemplo n.º 5
0
 /**
  * If bloom is enabled via the rendering settings, this method generates the images needed for the
  * bloom shader effect and stores them in their own frame buffers.
  *
  * <p>This effects renders adds fringes (or "feathers") of light to areas of intense brightness.
  * This in turn give the impression of those areas partially overwhelming the camera or the eye.
  *
  * <p>For more information see: http://en.wikipedia.org/wiki/Bloom_(shader_effect)
  */
 public void generateBloomPasses() {
   if (renderingConfig.isBloom()) {
     PerformanceMonitor.startActivity("Generating Bloom Passes");
     generateHighPass();
     generateBloom(buffers.sceneBloom0);
     generateBloom(buffers.sceneBloom1);
     generateBloom(buffers.sceneBloom2);
     PerformanceMonitor.endActivity();
   }
 }
Exemplo n.º 6
0
  /**
   * Enabled by the "outline" option in the render settings, this method generates landscape/objects
   * outlines and stores them into a buffer in its own FBO. The stored image is eventually combined
   * with others.
   *
   * <p>The outlines visually separate a given object (including the landscape) or parts of it from
   * sufficiently distant objects it overlaps. It is effectively a depth-based edge detection
   * technique and internally uses a Sobel operator.
   *
   * <p>For further information see: http://en.wikipedia.org/wiki/Sobel_operator
   */
  public void generateOutline() {
    if (renderingConfig.isOutline()) {
      materials.outline.enable();

      // TODO: verify inputs: shouldn't there be a texture binding here?
      buffers.outline.bind();

      setViewportTo(buffers.outline.dimensions());
      glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

      renderFullscreenQuad();

      graphicState.bindDisplay(); // TODO: verify this is necessary
      setViewportToWholeDisplay(); // TODO: verify this is necessary
    }
  }
Exemplo n.º 7
0
  /**
   * If each is enabled through the rendering settings, this method adds depth-of-field blur, motion
   * blur and film grain to the rendering obtained so far. If OculusVR support is enabled, it
   * composes (over two calls) the images for each eye into a single image, and applies a distortion
   * pattern to each, to match the optics in the OculusVR headset.
   *
   * <p>Finally, it either sends the image to the display or, when taking a screenshot, instructs
   * the rendering process to save it to a file. // TODO: update this sentence when the
   * FrameBuffersManager becomes available.
   *
   * @param renderingStage Can be MONO, LEFT_EYE or RIGHT_EYE, and communicates to the method
   *     weather it is dealing with a standard display or an OculusVR setup, and in the latter case,
   *     which eye is currently being rendered. Notice that if the OculusVR support is enabled, the
   *     image is sent to screen or saved to file only when the value passed in is RIGHT_EYE, as the
   *     processing for the LEFT_EYE comes first and leads to an incomplete image.
   */
  public void finalPostProcessing(WorldRenderer.WorldRenderingStage renderingStage) {
    PerformanceMonitor.startActivity("Rendering final scene");

    if (!renderingDebugConfig.isEnabled()) {
      materials.finalPost.enable();
    } else {
      materials.debug.enable();
    }

    if (!renderingConfig.isOculusVrSupport()) {
      renderFinalMonoImage();
    } else {
      renderFinalStereoImage(renderingStage);
    }

    PerformanceMonitor.endActivity();
  }
Exemplo n.º 8
0
  /** Generates light shafts and stores them in their own FBO. */
  public void generateLightShafts() {
    if (renderingConfig.isLightShafts()) {
      PerformanceMonitor.startActivity("Rendering light shafts");

      materials.lightShafts.enable();
      // TODO: verify what the inputs are
      buffers.lightShafts.bind();

      setViewportTo(buffers.lightShafts.dimensions());
      glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

      renderFullscreenQuad();

      graphicState.bindDisplay(); // TODO: verify this is necessary
      setViewportToWholeDisplay(); // TODO: verify this is necessary

      PerformanceMonitor.endActivity();
    }
  }
Exemplo n.º 9
0
  private void generateBlur(FBO sceneBlur) {
    materials.blur.enable();
    materials.blur.setFloat(
        "radius", overallBlurRadiusFactor * renderingConfig.getBlurRadius(), true);
    materials.blur.setFloat2(
        "texelSize", 1.0f / sceneBlur.width(), 1.0f / sceneBlur.height(), true);

    if (sceneBlur == buffers.sceneBlur0) {
      buffers.sceneToneMapped.bindTexture();
    } else {
      buffers.sceneBlur0.bindTexture();
    }

    sceneBlur.bind();

    setViewportTo(sceneBlur.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);

    renderFullscreenQuad();

    graphicState.bindDisplay();
    setViewportToWholeDisplay();
  }
Exemplo n.º 10
0
// TODO: Future work should not only "think" in terms of a DAG-like rendering pipeline
// TODO: but actually implement one, see https://github.com/MovingBlocks/Terasology/issues/1741
public class PostProcessor {

  private static final Logger logger = LoggerFactory.getLogger(PostProcessor.class);

  @EditorRange(min = 0.0f, max = 10.0f)
  private float hdrExposureDefault = 2.5f;

  @EditorRange(min = 0.0f, max = 10.0f)
  private float hdrMaxExposure = 8.0f;

  @EditorRange(min = 0.0f, max = 10.0f)
  private float hdrMaxExposureNight = 8.0f;

  @EditorRange(min = 0.0f, max = 10.0f)
  private float hdrMinExposure = 1.0f;

  @EditorRange(min = 0.0f, max = 4.0f)
  private float hdrTargetLuminance = 1.0f;

  @EditorRange(min = 0.0f, max = 0.5f)
  private float hdrExposureAdjustmentSpeed = 0.05f;

  @EditorRange(min = 0.0f, max = 5.0f)
  private float bloomHighPassThreshold = 0.75f;

  @EditorRange(min = 0.0f, max = 32.0f)
  private float bloomBlurRadius = 12.0f;

  @EditorRange(min = 0.0f, max = 16.0f)
  private float overallBlurRadiusFactor = 0.8f;

  private float currentExposure = 2.0f;
  private float currentSceneLuminance = 1.0f;

  private int displayListQuad = -1;
  private FBO.Dimensions fullScale;

  private LwjglRenderingProcess renderingProcess;
  private GraphicState graphicState;
  private Materials materials = new Materials();
  private Buffers buffers = new Buffers();

  private RenderingConfig renderingConfig = CoreRegistry.get(Config.class).getRendering();
  private RenderingDebugConfig renderingDebugConfig = renderingConfig.getDebug();

  /**
   * Returns a PostProcessor instance. On instantiation the returned instance is not yet usable. It
   * lacks references to Material assets and Frame Buffer Objects (FBOs) it needs to function.
   *
   * <p>Method initializeMaterials() must be called to initialize the Materials references. Method
   * obtainStaticFBOs() must be called to initialize unchanging FBOs references. Method
   * refreshDynamicFBOs() must be called at least once to initialize all other FBOs references.
   *
   * @param renderingProcess An LwjglRenderingProcess instance, required to obtain FBO references.
   * @param graphicState A GraphicState instance, providing opengl state-changing methods.
   */
  // TODO: update javadoc when the rendering process becomes the FrameBuffersManager
  public PostProcessor(LwjglRenderingProcess renderingProcess, GraphicState graphicState) {
    this.renderingProcess = renderingProcess;
    this.graphicState = graphicState;
  }

  /**
   * Initializes the internal references to Materials assets.
   *
   * <p>Must be called at least once before the PostProcessor instance is in use. Failure to do so
   * will result in NullPointerExceptions. Calling it additional times shouldn't hurt but shouldn't
   * be necessary either: the asset system refreshes the assets behind the scenes if necessary.
   */
  public void initializeMaterials() {
    // initial renderings
    materials.lightBufferPass = getMaterial("engine:prog.lightBufferPass");

    // pre-post composite
    materials.outline = getMaterial("engine:prog.sobel");
    materials.ssao = getMaterial("engine:prog.ssao");
    materials.ssaoBlurred = getMaterial("engine:prog.ssaoBlur");
    materials.prePostComposite = getMaterial("engine:prog.combine");

    // initial post-processing
    materials.lightShafts =
        getMaterial("engine:prog.lightshaft"); // TODO: rename shader to lightShafts
    materials.initialPost =
        getMaterial("engine:prog.prePost"); // TODO: rename shader to initialPost
    materials.downSampler = getMaterial("engine:prog.down"); // TODO: rename shader to downSampler
    materials.highPass = getMaterial("engine:prog.highp"); // TODO: rename shader to highPass
    materials.blur = getMaterial("engine:prog.blur");
    materials.toneMapping = getMaterial("engine:prog.hdr"); // TODO: rename shader to toneMapping

    // final post-processing
    materials.ocDistortion = getMaterial("engine:prog.ocDistortion");
    materials.finalPost = getMaterial("engine:prog.post"); // TODO: rename shader to finalPost
    materials.debug = getMaterial("engine:prog.debug");
  }

  private Material getMaterial(String assetId) {
    return Assets.getMaterial(assetId)
        .orElseThrow(
            () -> new RuntimeException("Failed to resolve required asset: '" + assetId + "'"));
  }

  /**
   * Fetches a number of static FBOs from the RenderingProcess instance and initializes a number of
   * internal references with them. They are called "static" as they do not change over the lifetime
   * of a PostProcessor instance.
   *
   * <p>This method must to be called at least once for the PostProcessor instance to function, but
   * does not need to be called additional times.
   *
   * <p>Failure to call this method -may- result in a NullPointerException. This is due to the
   * downsampleSceneAndUpdateExposure() method relying on these FBOs. But this method is fully
   * executed only if eye adaptation is enabled: an NPE would be thrown only in that case.
   */
  // TODO: update javadoc when the rendering process becomes the FrameBuffersManager
  public void obtainStaticFBOs() {
    buffers.downSampledScene[4] = renderingProcess.getFBO("scene16");
    buffers.downSampledScene[3] = renderingProcess.getFBO("scene8");
    buffers.downSampledScene[2] = renderingProcess.getFBO("scene4");
    buffers.downSampledScene[1] = renderingProcess.getFBO("scene2");
    buffers.downSampledScene[0] = renderingProcess.getFBO("scene1");
  }

  /**
   * Fetches a number of FBOs from the RenderingProcess instance and initializes or refreshes a
   * number of internal references with them. These FBOs may become obsolete over the lifetime of a
   * PostProcessor instance and refreshing the internal references might be needed. These FBOs are
   * therefore referred to as "dynamic" FBOs.
   *
   * <p>This method must be called at least once for the PostProcessor instance to function. Failure
   * to do so will result in NullPointerExceptions. It will then need to be called every time the
   * dynamic FBOs become obsolete and the internal references need to be refreshed with new FBOs.
   */
  // TODO: update javadoc when the rendering process becomes the FrameBuffersManager
  public void refreshDynamicFBOs() {
    // initial renderings
    buffers.sceneOpaque = renderingProcess.getFBO("sceneOpaque");
    buffers.sceneOpaquePingPong = renderingProcess.getFBO("sceneOpaquePingPong");

    buffers.sceneSkyBand0 = renderingProcess.getFBO("sceneSkyBand0");
    buffers.sceneSkyBand1 = renderingProcess.getFBO("sceneSkyBand1");

    buffers.sceneReflectiveRefractive = renderingProcess.getFBO("sceneReflectiveRefractive");
    // sceneReflected, in case one wonders, is not used by the post-processor.

    // pre-post composite
    buffers.outline = renderingProcess.getFBO("outline");
    buffers.ssao = renderingProcess.getFBO("ssao");
    buffers.ssaoBlurred = renderingProcess.getFBO("ssaoBlurred");

    // initial post-processing
    buffers.lightShafts = renderingProcess.getFBO("lightShafts");
    buffers.initialPost = renderingProcess.getFBO("initialPost");
    buffers.currentReadbackPBO = renderingProcess.getCurrentReadbackPBO();
    buffers.sceneToneMapped = renderingProcess.getFBO("sceneToneMapped");

    buffers.sceneHighPass = renderingProcess.getFBO("sceneHighPass");
    buffers.sceneBloom0 = renderingProcess.getFBO("sceneBloom0");
    buffers.sceneBloom1 = renderingProcess.getFBO("sceneBloom1");
    buffers.sceneBloom2 = renderingProcess.getFBO("sceneBloom2");

    buffers.sceneBlur0 = renderingProcess.getFBO("sceneBlur0");
    buffers.sceneBlur1 = renderingProcess.getFBO("sceneBlur1");

    // final post-processing
    buffers.ocUndistorted = renderingProcess.getFBO("ocUndistorted");
    buffers.sceneFinal = renderingProcess.getFBO("sceneFinal");

    fullScale = buffers.sceneOpaque.dimensions();
  }

  /**
   * In a number of occasions the rendering loop swaps two important FBOs. This method is used to
   * trigger the PostProcessor instance into refreshing the internal references to these FBOs.
   */
  public void refreshSceneOpaqueFBOs() {
    buffers.sceneOpaque = renderingProcess.getFBO("sceneOpaque");
    buffers.sceneOpaquePingPong = renderingProcess.getFBO("sceneOpaquePingPong");
  }

  /** Disposes of the PostProcessor instance. */
  // Not strictly necessary given the simplicity of the objects being nulled,
  // it is probably a good habit to have a dispose() method. It both properly
  // dispose support objects and it clearly marks the end of a PostProcessor
  // instance's lifecycle.
  public void dispose() {
    renderingProcess = null;
    graphicState = null;
    fullScale = null;
  }

  /**
   * Generates SkyBands and stores them into their specific FBOs if inscattering is enabled in the
   * rendering config.
   *
   * <p>SkyBands visually fade the far landscape and its entities into the color of the sky,
   * effectively constituting a form of depth cue.
   */
  public void generateSkyBands() {
    if (renderingConfig.isInscattering()) {
      generateSkyBand(buffers.sceneSkyBand0);
      generateSkyBand(buffers.sceneSkyBand1);
    }
  }

  private void generateSkyBand(FBO skyBand) {
    materials.blur.enable();
    materials.blur.setFloat("radius", 8.0f, true);
    materials.blur.setFloat2("texelSize", 1.0f / skyBand.width(), 1.0f / skyBand.height(), true);

    if (skyBand == buffers.sceneSkyBand0) {
      buffers.sceneOpaque.bindTexture();
    } else {
      buffers.sceneSkyBand0.bindTexture();
    }

    skyBand.bind();
    graphicState.setRenderBufferMask(skyBand, true, false, false);

    setViewportTo(skyBand.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

    renderFullscreenQuad();

    graphicState.bindDisplay(); // TODO: verify this is necessary
    setViewportToWholeDisplay(); // TODO: verify this is necessary
  }

  /**
   * Part of the deferred lighting technique, this method applies lighting through screen-space
   * calculations to the previously flat-lit world rendering stored in the primary FBO. // TODO:
   * rename sceneOpaque* FBOs to primaryA/B
   *
   * <p>See http://en.wikipedia.org/wiki/Deferred_shading as a starting point.
   */
  public void applyLightBufferPass() {

    int texId = 0;

    GL13.glActiveTexture(GL13.GL_TEXTURE0 + texId);
    buffers.sceneOpaque.bindTexture();
    materials.lightBufferPass.setInt("texSceneOpaque", texId++);

    GL13.glActiveTexture(GL13.GL_TEXTURE0 + texId);
    buffers.sceneOpaque.bindDepthTexture();
    materials.lightBufferPass.setInt("texSceneOpaqueDepth", texId++);

    GL13.glActiveTexture(GL13.GL_TEXTURE0 + texId);
    buffers.sceneOpaque.bindNormalsTexture();
    materials.lightBufferPass.setInt("texSceneOpaqueNormals", texId++);

    GL13.glActiveTexture(GL13.GL_TEXTURE0 + texId);
    buffers.sceneOpaque.bindLightBufferTexture();
    materials.lightBufferPass.setInt("texSceneOpaqueLightBuffer", texId, true);

    buffers.sceneOpaquePingPong.bind();
    graphicState.setRenderBufferMask(buffers.sceneOpaquePingPong, true, true, true);

    setViewportTo(buffers.sceneOpaquePingPong.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

    renderFullscreenQuad();

    graphicState.bindDisplay(); // TODO: verify this is necessary
    setViewportToWholeDisplay(); // TODO: verify this is necessary

    renderingProcess.swapSceneOpaqueFBOs();
    buffers.sceneOpaque.attachDepthBufferTo(buffers.sceneReflectiveRefractive);
  }

  /**
   * Enabled by the "outline" option in the render settings, this method generates landscape/objects
   * outlines and stores them into a buffer in its own FBO. The stored image is eventually combined
   * with others.
   *
   * <p>The outlines visually separate a given object (including the landscape) or parts of it from
   * sufficiently distant objects it overlaps. It is effectively a depth-based edge detection
   * technique and internally uses a Sobel operator.
   *
   * <p>For further information see: http://en.wikipedia.org/wiki/Sobel_operator
   */
  public void generateOutline() {
    if (renderingConfig.isOutline()) {
      materials.outline.enable();

      // TODO: verify inputs: shouldn't there be a texture binding here?
      buffers.outline.bind();

      setViewportTo(buffers.outline.dimensions());
      glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

      renderFullscreenQuad();

      graphicState.bindDisplay(); // TODO: verify this is necessary
      setViewportToWholeDisplay(); // TODO: verify this is necessary
    }
  }

  /**
   * If Ambient Occlusion is enabled in the render settings, this method generates and stores the
   * necessary images into their own FBOs. The stored images are eventually combined with others.
   *
   * <p>For further information on Ambient Occlusion see:
   * http://en.wikipedia.org/wiki/Ambient_occlusion
   */
  public void generateAmbientOcclusionPasses() {
    if (renderingConfig.isSsao()) {
      generateSSAO();
      generateBlurredSSAO();
    }
  }

  private void generateSSAO() {
    materials.ssao.enable();
    materials.ssao.setFloat2(
        "texelSize", 1.0f / buffers.ssao.width(), 1.0f / buffers.ssao.height(), true);
    materials.ssao.setFloat2("noiseTexelSize", 1.0f / 4.0f, 1.0f / 4.0f, true);

    // TODO: verify if some textures should be bound here
    buffers.ssao.bind();

    setViewportTo(buffers.ssao.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

    renderFullscreenQuad();

    graphicState.bindDisplay(); // TODO: verify this is necessary
    setViewportToWholeDisplay(); // TODO: verify this is necessary
  }

  private void generateBlurredSSAO() {
    materials.ssaoBlurred.enable();
    materials.ssaoBlurred.setFloat2(
        "texelSize", 1.0f / buffers.ssaoBlurred.width(), 1.0f / buffers.ssaoBlurred.height(), true);

    buffers.ssao.bindTexture(); // TODO: verify this is the only input

    buffers.ssaoBlurred.bind();

    setViewportTo(buffers.ssaoBlurred.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

    renderFullscreenQuad();

    graphicState.bindDisplay(); // TODO: verify this is necessary
    setViewportToWholeDisplay(); // TODO: verify this is necessary
  }

  /**
   * Adds outlines and ambient occlusion to the rendering obtained so far stored in the primary FBO.
   * Stores the resulting output back into the primary buffer.
   */
  public void generatePrePostComposite() {
    materials.prePostComposite.enable();

    // TODO: verify if there should be bound textures here.
    buffers.sceneOpaquePingPong.bind();

    setViewportTo(buffers.sceneOpaquePingPong.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

    renderFullscreenQuad();

    graphicState.bindDisplay(); // TODO: verify this is necessary
    setViewportToWholeDisplay(); // TODO: verify this is necessary

    renderingProcess.swapSceneOpaqueFBOs();
    buffers.sceneOpaque.attachDepthBufferTo(buffers.sceneReflectiveRefractive);
  }

  /** Generates light shafts and stores them in their own FBO. */
  public void generateLightShafts() {
    if (renderingConfig.isLightShafts()) {
      PerformanceMonitor.startActivity("Rendering light shafts");

      materials.lightShafts.enable();
      // TODO: verify what the inputs are
      buffers.lightShafts.bind();

      setViewportTo(buffers.lightShafts.dimensions());
      glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

      renderFullscreenQuad();

      graphicState.bindDisplay(); // TODO: verify this is necessary
      setViewportToWholeDisplay(); // TODO: verify this is necessary

      PerformanceMonitor.endActivity();
    }
  }

  /**
   * Adds chromatic aberration, light shafts, 1/8th resolution bloom, vignette onto the rendering
   * achieved so far. Stores the result into its own buffer to be used at a later stage.
   */
  public void initialPostProcessing() {
    PerformanceMonitor.startActivity("Initial Post-Processing");
    materials.initialPost.enable();

    // TODO: verify what the inputs are
    buffers.initialPost.bind(); // TODO: see if we could write this straight into sceneOpaque

    setViewportTo(buffers.initialPost.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

    renderFullscreenQuad();

    graphicState.bindDisplay(); // TODO: verify this is necessary
    setViewportToWholeDisplay(); // TODO: verify this is necessary

    PerformanceMonitor.endActivity();
  }

  private void downsampleSceneInto1x1pixelsBuffer() {
    PerformanceMonitor.startActivity("Rendering eye adaption");

    materials.downSampler.enable();
    FBO downSampledFBO;

    for (int i = 4; i >= 0; i--) {

      downSampledFBO = buffers.downSampledScene[i];
      materials.downSampler.setFloat("size", downSampledFBO.width(), true);

      downSampledFBO.bind();

      setViewportTo(downSampledFBO.dimensions());
      glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);

      // TODO: move this block above, for consistency
      if (i == 4) {
        buffers.initialPost.bindTexture();
      } else {
        buffers.downSampledScene[i + 1].bindTexture();
      }

      renderFullscreenQuad();

      graphicState.bindDisplay(); // TODO: probably can be removed or moved out of the loop
    }

    setViewportToWholeDisplay(); // TODO: verify this is necessary

    PerformanceMonitor.endActivity();
  }

  /**
   * First downsamples the rendering obtained so far, after the initial post processing, into a 1x1
   * pixel buffer. Then calculate its pixel's luma to update the exposure value. This is used later,
   * during tone mapping.
   */
  // TODO: verify if this can be achieved entirely in the GPU, during tone mapping perhaps?
  public void downsampleSceneAndUpdateExposure() {
    if (renderingConfig.isEyeAdaptation()) {
      PerformanceMonitor.startActivity("Updating exposure");

      downsampleSceneInto1x1pixelsBuffer();

      renderingProcess
          .getCurrentReadbackPBO()
          .copyFromFBO(
              buffers.downSampledScene[0].fboId, 1, 1, GL12.GL_BGRA, GL11.GL_UNSIGNED_BYTE);

      renderingProcess.swapReadbackPBOs();

      ByteBuffer pixels = renderingProcess.getCurrentReadbackPBO().readBackPixels();

      if (pixels.limit() < 3) {
        logger.error("Failed to auto-update the exposure value.");
        return;
      }

      // TODO: make this line more readable by breaking it in smaller pieces
      currentSceneLuminance =
          0.2126f * (pixels.get(2) & 0xFF) / 255.f
              + 0.7152f * (pixels.get(1) & 0xFF) / 255.f
              + 0.0722f * (pixels.get(0) & 0xFF) / 255.f;

      float targetExposure = hdrMaxExposure;

      if (currentSceneLuminance > 0) {
        targetExposure = hdrTargetLuminance / currentSceneLuminance;
      }

      float maxExposure = hdrMaxExposure;

      if (CoreRegistry.get(BackdropProvider.class).getDaylight()
          == 0.0) { // TODO: fetch the backdropProvider earlier and only once
        maxExposure = hdrMaxExposureNight;
      }

      if (targetExposure > maxExposure) {
        targetExposure = maxExposure;
      } else if (targetExposure < hdrMinExposure) {
        targetExposure = hdrMinExposure;
      }

      currentExposure = TeraMath.lerp(currentExposure, targetExposure, hdrExposureAdjustmentSpeed);

    } else {
      if (CoreRegistry.get(BackdropProvider.class).getDaylight() == 0.0) {
        currentExposure = hdrMaxExposureNight;
      } else {
        currentExposure = hdrExposureDefault;
      }
    }
    PerformanceMonitor.endActivity();
  }

  /** // TODO: write javadoc */
  // TODO: Tone mapping usually maps colors from HDR to a more limited range,
  // TODO: i.e. the 24 bit a monitor can display. This method however maps from an HDR buffer
  // TODO: to another HDR buffer and this puzzles me. Will need to dig deep in the shader to
  // TODO: see what it does.
  public void generateToneMappedScene() {
    PerformanceMonitor.startActivity("Tone mapping");

    materials.toneMapping.enable();

    buffers.sceneToneMapped.bind();

    setViewportTo(buffers.sceneToneMapped.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

    renderFullscreenQuad();

    graphicState.bindDisplay(); // TODO: verify this is necessary
    setViewportToWholeDisplay(); // TODO: verify this is necessary

    PerformanceMonitor.endActivity();
  }

  /**
   * If bloom is enabled via the rendering settings, this method generates the images needed for the
   * bloom shader effect and stores them in their own frame buffers.
   *
   * <p>This effects renders adds fringes (or "feathers") of light to areas of intense brightness.
   * This in turn give the impression of those areas partially overwhelming the camera or the eye.
   *
   * <p>For more information see: http://en.wikipedia.org/wiki/Bloom_(shader_effect)
   */
  public void generateBloomPasses() {
    if (renderingConfig.isBloom()) {
      PerformanceMonitor.startActivity("Generating Bloom Passes");
      generateHighPass();
      generateBloom(buffers.sceneBloom0);
      generateBloom(buffers.sceneBloom1);
      generateBloom(buffers.sceneBloom2);
      PerformanceMonitor.endActivity();
    }
  }

  private void generateHighPass() {
    materials.highPass.enable();
    materials.highPass.setFloat("highPassThreshold", bloomHighPassThreshold, true);

    int texId = 0;
    GL13.glActiveTexture(GL13.GL_TEXTURE0 + texId);
    buffers.sceneOpaque.bindTexture();
    materials.highPass.setInt("tex", texId);

    //        GL13.glActiveTexture(GL13.GL_TEXTURE0 + texId);
    //        buffers.sceneOpaque.bindDepthTexture();
    //        program.setInt("texDepth", texId++);

    buffers.sceneHighPass.bind();

    setViewportTo(buffers.sceneHighPass.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);

    renderFullscreenQuad();

    graphicState.bindDisplay();
    setViewportToWholeDisplay();
  }

  private void generateBloom(FBO sceneBloom) {
    materials.blur.enable();
    materials.blur.setFloat("radius", bloomBlurRadius, true);
    materials.blur.setFloat2(
        "texelSize", 1.0f / sceneBloom.width(), 1.0f / sceneBloom.height(), true);

    if (sceneBloom == buffers.sceneBloom0) {
      buffers.sceneHighPass.bindTexture();
    } else if (sceneBloom == buffers.sceneBloom1) {
      buffers.sceneBloom0.bindTexture();
    } else {
      buffers.sceneBloom1.bindTexture();
    }

    sceneBloom.bind();

    setViewportTo(sceneBloom.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // TODO: verify this is necessary

    renderFullscreenQuad();

    graphicState.bindDisplay(); // TODO: verify this is necessary
    setViewportToWholeDisplay(); // TODO: verify this is necessary
  }

  /**
   * If blur is enabled through the rendering settings, this method generates the images used by the
   * Blur effect when underwater and for the Depth of Field effect when above water.
   *
   * <p>For more information on blur: http://en.wikipedia.org/wiki/Defocus_aberration For more
   * information on DoF: http://en.wikipedia.org/wiki/Depth_of_field
   */
  public void generateBlurPasses() {
    if (renderingConfig.getBlurIntensity() != 0) {
      PerformanceMonitor.startActivity("Generating Blur Passes");
      generateBlur(buffers.sceneBlur0);
      generateBlur(buffers.sceneBlur1);
      PerformanceMonitor.endActivity();
    }
  }

  private void generateBlur(FBO sceneBlur) {
    materials.blur.enable();
    materials.blur.setFloat(
        "radius", overallBlurRadiusFactor * renderingConfig.getBlurRadius(), true);
    materials.blur.setFloat2(
        "texelSize", 1.0f / sceneBlur.width(), 1.0f / sceneBlur.height(), true);

    if (sceneBlur == buffers.sceneBlur0) {
      buffers.sceneToneMapped.bindTexture();
    } else {
      buffers.sceneBlur0.bindTexture();
    }

    sceneBlur.bind();

    setViewportTo(sceneBlur.dimensions());
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);

    renderFullscreenQuad();

    graphicState.bindDisplay();
    setViewportToWholeDisplay();
  }

  // Final Post-Processing: depth-of-field blur, motion blur, film grain, grading, OculusVR
  // distortion

  /**
   * If each is enabled through the rendering settings, this method adds depth-of-field blur, motion
   * blur and film grain to the rendering obtained so far. If OculusVR support is enabled, it
   * composes (over two calls) the images for each eye into a single image, and applies a distortion
   * pattern to each, to match the optics in the OculusVR headset.
   *
   * <p>Finally, it either sends the image to the display or, when taking a screenshot, instructs
   * the rendering process to save it to a file. // TODO: update this sentence when the
   * FrameBuffersManager becomes available.
   *
   * @param renderingStage Can be MONO, LEFT_EYE or RIGHT_EYE, and communicates to the method
   *     weather it is dealing with a standard display or an OculusVR setup, and in the latter case,
   *     which eye is currently being rendered. Notice that if the OculusVR support is enabled, the
   *     image is sent to screen or saved to file only when the value passed in is RIGHT_EYE, as the
   *     processing for the LEFT_EYE comes first and leads to an incomplete image.
   */
  public void finalPostProcessing(WorldRenderer.WorldRenderingStage renderingStage) {
    PerformanceMonitor.startActivity("Rendering final scene");

    if (!renderingDebugConfig.isEnabled()) {
      materials.finalPost.enable();
    } else {
      materials.debug.enable();
    }

    if (!renderingConfig.isOculusVrSupport()) {
      renderFinalMonoImage();
    } else {
      renderFinalStereoImage(renderingStage);
    }

    PerformanceMonitor.endActivity();
  }

  private void renderFinalMonoImage() {

    if (renderingProcess.isNotTakingScreenshot()) {
      graphicState.bindDisplay();
      renderFullscreenQuad(0, 0, Display.getWidth(), Display.getHeight());

    } else {
      buffers.sceneFinal.bind();

      glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
      renderFullscreenQuad(0, 0, fullScale.width(), fullScale.height());

      renderingProcess.saveScreenshot();
      // when saving a screenshot we do not send the image to screen,
      // to avoid the brief one-frame flicker of the screenshot

      // This is needed to avoid the UI (which is not currently saved within the
      // screenshot) being rendered for one frame with buffers.sceneFinal size.
      setViewportToWholeDisplay();
    }
  }

  // TODO: have a flag to invert the eyes (Cross Eye 3D), as mentioned in
  // TODO: http://forum.terasology.org/threads/happy-coding.1018/#post-11264
  private void renderFinalStereoImage(WorldRenderer.WorldRenderingStage renderingStage) {
    if (renderingProcess.isNotTakingScreenshot()) {
      buffers.sceneFinal.bind();
    } else {
      buffers.ocUndistorted.bind();
    }

    switch (renderingStage) {
      case LEFT_EYE:
        glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
        renderFullscreenQuad(0, 0, fullScale.width() / 2, fullScale.height());

        break;

      case RIGHT_EYE:
        // no glClear() here: the rendering for the second eye is being added besides the first
        // eye's rendering
        renderFullscreenQuad(
            fullScale.width() / 2 + 1, 0, fullScale.width() / 2, fullScale.height());

        if (renderingProcess.isNotTakingScreenshot()) {
          graphicState.bindDisplay();
          applyOculusDistortion(buffers.sceneFinal);

        } else {
          buffers.sceneFinal.bind();
          applyOculusDistortion(buffers.ocUndistorted);
          renderingProcess.saveScreenshot();
          // when saving a screenshot we do NOT send the image to screen,
          // to avoid the brief flicker of the screenshot for one frame
        }

        break;
    }
  }

  private void applyOculusDistortion(FBO inputBuffer) {
    materials.ocDistortion.enable();

    int texId = 0;
    GL13.glActiveTexture(GL13.GL_TEXTURE0 + texId);
    inputBuffer.bindTexture();
    materials.ocDistortion.setInt("texInputBuffer", texId, true);

    if (renderingProcess.isNotTakingScreenshot()) {
      updateOcShaderParametersForVP(
          0,
          0,
          fullScale.width() / 2,
          fullScale.height(),
          WorldRenderer.WorldRenderingStage.LEFT_EYE);
      renderFullscreenQuad(0, 0, Display.getWidth(), Display.getHeight());
      updateOcShaderParametersForVP(
          fullScale.width() / 2 + 1,
          0,
          fullScale.width() / 2,
          fullScale.height(),
          WorldRenderer.WorldRenderingStage.RIGHT_EYE);
      renderFullscreenQuad(0, 0, Display.getWidth(), Display.getHeight());

    } else {
      // what follows -should- work also when there is no screenshot being taken, but somehow it
      // doesn't, hence the block above
      updateOcShaderParametersForVP(
          0,
          0,
          fullScale.width() / 2,
          fullScale.height(),
          WorldRenderer.WorldRenderingStage.LEFT_EYE);
      renderFullscreenQuad(0, 0, fullScale.width(), fullScale.height());
      updateOcShaderParametersForVP(
          fullScale.width() / 2 + 1,
          0,
          fullScale.width() / 2,
          fullScale.height(),
          WorldRenderer.WorldRenderingStage.RIGHT_EYE);
      renderFullscreenQuad(0, 0, fullScale.width(), fullScale.height());
    }
  }

  private void updateOcShaderParametersForVP(
      int vpX,
      int vpY,
      int vpWidth,
      int vpHeight,
      WorldRenderer.WorldRenderingStage renderingStage) {
    float w = (float) vpWidth / fullScale.width();
    float h = (float) vpHeight / fullScale.height();
    float x = (float) vpX / fullScale.width();
    float y = (float) vpY / fullScale.height();

    float as = (float) vpWidth / vpHeight;

    materials.ocDistortion.setFloat4(
        "ocHmdWarpParam",
        OculusVrHelper.getDistortionParams()[0],
        OculusVrHelper.getDistortionParams()[1],
        OculusVrHelper.getDistortionParams()[2],
        OculusVrHelper.getDistortionParams()[3],
        true);

    float ocLensCenter =
        (renderingStage == WorldRenderer.WorldRenderingStage.RIGHT_EYE)
            ? -1.0f * OculusVrHelper.getLensViewportShift()
            : OculusVrHelper.getLensViewportShift();

    materials.ocDistortion.setFloat2(
        "ocLensCenter", x + (w + ocLensCenter * 0.5f) * 0.5f, y + h * 0.5f, true);
    materials.ocDistortion.setFloat2("ocScreenCenter", x + w * 0.5f, y + h * 0.5f, true);

    float scaleFactor = 1.0f / OculusVrHelper.getScaleFactor();

    materials.ocDistortion.setFloat2(
        "ocScale", (w / 2) * scaleFactor, (h / 2) * scaleFactor * as, true);
    materials.ocDistortion.setFloat2("ocScaleIn", (2 / w), (2 / h) / as, true);
  }

  /** Renders a quad filling the whole currently set viewport. */
  public void renderFullscreenQuad() {
    glMatrixMode(GL_MODELVIEW);
    glPushMatrix();
    glLoadIdentity();

    glMatrixMode(GL_PROJECTION);
    glPushMatrix();
    glLoadIdentity();

    renderQuad();

    glPopMatrix();

    glMatrixMode(GL_MODELVIEW);
    glPopMatrix();
  }

  /**
   * First sets a viewport and then renders a quad filling it.
   *
   * @param x an integer representing the x coordinate (in pixels) of the origin of the viewport.
   * @param y an integer representing the y coordinate (in pixels) of the origin of the viewport.
   * @param viewportWidth an integer representing the width (in pixels) the viewport.
   * @param viewportHeight an integer representing the height (in pixels) the viewport.
   */
  // TODO: perhaps remove this method and make sure the viewport is set explicitely.
  public void renderFullscreenQuad(int x, int y, int viewportWidth, int viewportHeight) {
    glViewport(x, y, viewportWidth, viewportHeight);
    renderFullscreenQuad();
  }

  // TODO: replace with a proper resident buffer with interleaved vertex and uv coordinates
  private void renderQuad() {
    if (displayListQuad == -1) {
      displayListQuad = glGenLists(1);

      glNewList(displayListQuad, GL11.GL_COMPILE);

      glBegin(GL_QUADS);
      glColor4f(1.0f, 1.0f, 1.0f, 1.0f);

      glTexCoord2d(0.0, 0.0);
      glVertex3i(-1, -1, -1);

      glTexCoord2d(1.0, 0.0);
      glVertex3i(1, -1, -1);

      glTexCoord2d(1.0, 1.0);
      glVertex3i(1, 1, -1);

      glTexCoord2d(0.0, 1.0);
      glVertex3i(-1, 1, -1);

      glEnd();

      glEndList();
    }

    glCallList(displayListQuad);
  }

  private void setViewportToWholeDisplay() {
    glViewport(0, 0, fullScale.width(), fullScale.height());
  }

  private void setViewportTo(FBO.Dimensions dimensions) {
    glViewport(0, 0, dimensions.width(), dimensions.height());
  }

  /**
   * Returns the current exposure value (set in downsampleSceneAndUpdateExposure()).
   *
   * @return a float representing the current exposure value.
   */
  public float getExposure() {
    return currentExposure;
  }

  private class Materials {
    // initial renderings
    public Material lightBufferPass;

    // pre-post composite
    public Material outline;
    public Material ssao;
    public Material ssaoBlurred;
    public Material prePostComposite;

    // initial post-processing
    public Material lightShafts;
    public Material downSampler;
    public Material highPass;
    public Material blur;
    public Material toneMapping;
    public Material initialPost;

    // final post-processing
    public Material ocDistortion;
    public Material finalPost;
    public Material debug;
  }

  private class Buffers {
    // initial renderings
    public FBO sceneOpaque;
    public FBO sceneOpaquePingPong;

    public FBO sceneSkyBand0;
    public FBO sceneSkyBand1;

    public FBO sceneReflectiveRefractive;
    // sceneReflected is not used by the postProcessor

    // pre-post composite
    public FBO outline;
    public FBO ssao;
    public FBO ssaoBlurred;
    public FBO initialPost;

    // initial post-processing
    public FBO lightShafts;

    public FBO[] downSampledScene = new FBO[5];
    public PBO currentReadbackPBO;

    public FBO sceneToneMapped;

    public FBO sceneHighPass;
    public FBO sceneBloom0;
    public FBO sceneBloom1;
    public FBO sceneBloom2;

    public FBO sceneBlur0;
    public FBO sceneBlur1;

    // final post-processing
    public FBO ocUndistorted;
    public FBO sceneFinal;
  }
}
Exemplo n.º 11
0
 /**
  * If Ambient Occlusion is enabled in the render settings, this method generates and stores the
  * necessary images into their own FBOs. The stored images are eventually combined with others.
  *
  * <p>For further information on Ambient Occlusion see:
  * http://en.wikipedia.org/wiki/Ambient_occlusion
  */
 public void generateAmbientOcclusionPasses() {
   if (renderingConfig.isSsao()) {
     generateSSAO();
     generateBlurredSSAO();
   }
 }
Exemplo n.º 12
0
 /**
  * Generates SkyBands and stores them into their specific FBOs if inscattering is enabled in the
  * rendering config.
  *
  * <p>SkyBands visually fade the far landscape and its entities into the color of the sky,
  * effectively constituting a form of depth cue.
  */
 public void generateSkyBands() {
   if (renderingConfig.isInscattering()) {
     generateSkyBand(buffers.sceneSkyBand0);
     generateSkyBand(buffers.sceneSkyBand1);
   }
 }
Exemplo n.º 13
0
 public boolean isFullscreen() {
   return renderingConfig.isFullscreen();
 }