Exemplo n.º 1
0
 private void finalizeSurface(World world, int x, int y, int z) {
   for (byte px = 0; px < 16; px++) {
     for (byte pz = 0; pz < 16; pz++) {
       for (byte py = -1; py < 4; py++) {
         final Block block = world.getBlock(x + px, y + py, z + pz, world);
         if (block.isAtSurface()) {
           final BlockMaterial material = block.getMaterial();
           if (material == VanillaMaterials.DIRT) {
             final BlockMaterial top;
             final Biome biome = block.getBiomeType();
             if (biome instanceof GrassyBiome) {
               top = ((GrassyBiome) biome).getTopCover();
             } else {
               top = VanillaMaterials.GRASS;
             }
             block.setMaterial(top);
           } else if (material == VanillaMaterials.STATIONARY_WATER
               && block.translate(0, 1, 0).isMaterial(VanillaMaterials.AIR)) {
             if (block.getBiomeType() instanceof IcyBiome) {
               block.setMaterial(VanillaMaterials.ICE);
             }
           }
         }
       }
     }
   }
 }
Exemplo n.º 2
0
 @Override
 public void onUpdate(BlockMaterial oldMaterial, Block block) {
   super.onUpdate(oldMaterial, block);
   boolean power = isReceivingPower(block);
   if (power) {
     block.setData(HAS_REDSTONE_POWER);
   } else {
     block.setData(HAS_NO_REDSTONE_POWER);
     for (BlockFace face : BlockFaces.BTEWNS) {
       Block other = block.translate(face);
       if (other.getMaterial() instanceof RedstoneLamp) {
         if (other.getData() == HAS_REDSTONE_POWER) {
           power = true;
           break;
         }
       }
     }
   }
   if (on != power) {
     if (power) {
       block.setMaterial(VanillaMaterials.REDSTONE_LAMP_ON);
     } else {
       block.setMaterial(VanillaMaterials.REDSTONE_LAMP_OFF);
     }
   }
 }
Exemplo n.º 3
0
 @Override
 public boolean onPlacement(Block block, short data, BlockFace against, boolean isClickedBlock) {
   if (block.getMaterial().equals(this)) {
     block.setMaterial(this.doubletype).update();
   } else {
     block.setMaterial(this);
     this.setTop(block, against == BlockFace.TOP);
     block.update();
   }
   return true;
 }
Exemplo n.º 4
0
 @Override
 public void onUpdate(Block block) {
   BlockMaterial below = block.translate(BlockFace.BOTTOM).getMaterial();
   if (below.getMaterial() == VanillaMaterials.AIR) {
     block.setMaterial(VanillaMaterials.AIR).update(true);
   }
 }
Exemplo n.º 5
0
  @Override
  public void onDynamicUpdate(Block block, long updateTime, int data) {
    if (block.translate(BlockFace.TOP).getLight() < this.getMinimumLightToGrow()) {
      block.dynamicUpdate(updateTime + getGrowthTime(block), true);
      return;
    }
    int chance = VanillaBlockMaterial.getCropGrowthChance(block) + 1;
    final Random rand = GenericMath.getRandom();
    if (rand.nextInt(chance) == 0) {
      if (isFullyGrown(block)) {
        for (int i = 0; i < BlockFaces.NESW.size(); i++) {
          Block spread = block.translate(BlockFaces.NESW.get(i));
          BlockMaterial material = spread.getMaterial();
          if (material == VanillaMaterials.AIR) {
            BlockMaterial belowSpread = spread.translate(BlockFace.BOTTOM).getMaterial();
            if (belowSpread.isMaterial(
                VanillaMaterials.FARMLAND, VanillaMaterials.DIRT, VanillaMaterials.GRASS)) {
              spread.setMaterial(this.getLastStageMaterial());
              break;
            }
          } else if (material == getLastStageMaterial()) {
            break;
          }
        }
      } else {
        block.addData(1);
      }
    }

    block.dynamicUpdate(updateTime + getGrowthTime(block), true);
  }
Exemplo n.º 6
0
 /**
  * Called when this liquid created a new liquid because it spread
  *
  * @param block of the Liquid that got created
  * @param from where it spread
  * @return True to notify spreading was allowed, False to deny
  */
 public void onSpread(Block block, int newLevel, BlockFace from) {
   block.getMaterial().destroy(block);
   block.setMaterial(this.getFlowingMaterial());
   this.setLevel(block, newLevel);
   if (from == BlockFace.TOP) {
     this.setFlowingDown(block, true);
   }
 }
Exemplo n.º 7
0
 @Override
 public void setAttachedFace(Block block, BlockFace attachedFace, Cause<?> cause) {
   if (attachedFace == BlockFace.BOTTOM) {
     short data = 0;
     if (cause instanceof EntityCause) {
       Entity entity = ((EntityCause) cause).getSource();
       float yaw = entity.getTransform().getYaw() * -1.0f;
       float rotation = (yaw + 180F) * 16F / 360F;
       data = (short) (rotation + 0.5F);
       data &= 15;
     }
     block.setMaterial(VanillaMaterials.SIGN_POST, data, cause);
   } else {
     // get the data for this face
     short data = (short) (BlockFaces.WESN.indexOf(attachedFace, 0) + 2);
     block.setMaterial(VanillaMaterials.WALL_SIGN, data, cause);
   }
 }
Exemplo n.º 8
0
 public void fillDownwards(int xx, int yy, int zz, int limit, BlockMaterial material, short data) {
   short counter = 0;
   Block block;
   while (((block = getBlock(xx, yy, zz)).getMaterial().isMaterial(VanillaMaterials.AIR)
           || block.getMaterial() instanceof Liquid)
       && counter++ < limit) {
     block.setMaterial(material, data);
     yy--;
   }
 }
Exemplo n.º 9
0
 public void attachMaterial(int xx, int yy, int zz, Attachable attachable) {
   final Block block = getBlock(xx, yy, zz);
   for (BlockFace face : BlockFaces.BTNSWE) {
     final Block adjacent = block.translate(face);
     if (attachable.canAttachTo(adjacent, face.getOpposite())) {
       block.setMaterial((BlockMaterial) attachable);
       attachable.setAttachedFace(block, face, null);
     }
   }
 }
Exemplo n.º 10
0
 @Override
 public void setAttachedFace(Block block, BlockFace attachedFace) {
   if (attachedFace == BlockFace.BOTTOM) {
     Source source = block.getSource();
     short data = 0;
     if (source instanceof Entity) {
       Vector3 direction =
           block.getPosition().subtract(((Entity) source).getTransform().getPosition());
       float rotation = direction.rotationTo(Vector3.RIGHT).getYaw();
       rotation = rotation / 360f * 16f;
       data = (short) rotation;
     }
     block.setMaterial(VanillaMaterials.SIGN_POST, data).queueUpdate(EffectRange.THIS);
   } else {
     // get the data for this face
     short data = (short) (BlockFaces.NSWE.indexOf(attachedFace, 0) + 2);
     block.setMaterial(VanillaMaterials.WALL_SIGN, data).queueUpdate(EffectRange.THIS);
   }
 }
Exemplo n.º 11
0
 @Override
 public void onUpdate(BlockMaterial oldMaterial, Block block) {
   super.onUpdate(oldMaterial, block);
   if (!block.translate(BlockFace.BOTTOM).getMaterial().isPlacementObstacle()) {
     // turn this block into a mobile block
     Entity e =
         block
             .getWorld()
             .createAndSpawnEntity(block.getPosition(), FallingBlock.class, LoadOption.NO_LOAD);
     e.add(FallingBlock.class).setMaterial(this);
     block.setMaterial(VanillaMaterials.AIR);
   }
 }
Exemplo n.º 12
0
 @Override
 public void placeObject(World world, int x, int y, int z) {
   x -= 8;
   z -= 8;
   Biome biome = world.getBiomeType(x, y, z);
   boolean sandy = biome instanceof SandyBiome;
   for (byte px = 0; px < 16; px++) {
     for (byte pz = 0; pz < 16; pz++) {
       boolean columnHasWater = false;
       for (byte py = (byte) -holeHeightMap[16 * px + pz]; py < 0; py++) {
         world.setBlockMaterial(px + x, py + y, pz + z, liquid, (short) 0, world);
         columnHasWater = true;
       }
       if (stoneWalls) {
         for (byte py = 1; py < 5; py++) {
           if (isWallBlock(px, py, pz, holeHeightMap)) {
             world.setBlockMaterial(
                 x + px, y - py, z + pz, VanillaMaterials.STONE, (short) 0, world);
           }
         }
       }
       for (byte py = 0; py < topHeightMap[16 * px + pz]; py++) {
         world.setBlockMaterial(px + x, py + y, pz + z, VanillaMaterials.AIR, (short) 0, world);
       }
       if (stonyTop) {
         for (byte py = 1; py < 5; py++) {
           if (isWallBlock(px, py, pz, topHeightMap)) {
             final Block block = world.getBlock(px + x, py + y - 1, pz + z, world);
             if (random.nextBoolean() && block.getMaterial().isOpaque()) {
               block.setMaterial(VanillaMaterials.STONE);
             }
           }
         }
       }
       if (sandy && columnHasWater) {
         int ty = topHeightMap[16 * px + pz] + y;
         if (world.getBlockMaterial(x + px, ty, z + pz).equals(VanillaMaterials.SAND)) {
           world.setBlockMaterial(
               x + px, ty, z + pz, VanillaMaterials.SANDSTONE, (short) 0, world);
         }
       }
     }
   }
   if (biomeAdaptedSurface) {
     finalizeSurface(world, x, y, z);
   }
 }
Exemplo n.º 13
0
 @Override
 public void onDynamicUpdate(Block block, long updateTime, int data) {
   if (willMeltAt(block)) {
     short dataBlock = block.getData();
     if (dataBlock > 0) {
       block.setData(dataBlock - 1);
     } else {
       block.setMaterial(VanillaMaterials.AIR);
     }
   } else { // not warm enough to melt the snow and last poll was a long time ago, might as well
            // skip repeated polls
     long age = block.getWorld().getAge();
     if (age - updateTime > POLL_TIME) {
       block.dynamicUpdate(age + new Random().nextInt((int) POLL_TIME), true);
       return;
     }
   }
   block.dynamicUpdate(updateTime + POLL_TIME, true);
   // TODO : Delay before next check ?
 }
Exemplo n.º 14
0
 /**
  * Let's this liquid flow from the block to the direction given
  *
  * @param block to flow from
  * @param to flow to
  * @return True if flowing was successful
  */
 public boolean onFlow(Block block, BlockFace to) {
   int level;
   if (to == BlockFace.BOTTOM) {
     level = this.getMaxLevel();
   } else {
     level = this.getLevel(block) - 1;
     if (level < 0) {
       return false;
     }
   }
   Block spread =
       block.getWorld().getBlock(block.getX(), block.getY(), block.getZ(), this).translate(to);
   BlockMaterial spreadMat = spread.getMaterial();
   if (this.isMaterial(spreadMat)) {
     if (this.isMaximumLevel(spread)) {
       // If the block above was a non-flowing source, return false to make it spread outwards
       // If the block above was not a source, return true to stop spreading
       return !this.isSource(block);
     } else {
       // Compare levels
       if (level > this.getLevel(spread)) {
         if (spreadMat != this.getFlowingMaterial()) {
           // Make sure the material is adjusted
           spread.setMaterial(this.getFlowingMaterial(), spread.getData());
         }
         this.setLevel(spread, level);
         if (to == BlockFace.BOTTOM) {
           this.setFlowingDown(spread, true);
         }
         // Update blocks around
         return true;
       }
     }
   } else if (!isLiquidObstacle(spreadMat)) {
     // Create a new liquid
     this.onSpread(spread, level, to.getOpposite());
     return true;
   }
   return false;
 }
Exemplo n.º 15
0
 @Override
 public void populate(Chunk chunk, Random random) {
   if (chunk.getY() != 4) {
     return;
   }
   final int size = Chunk.BLOCKS.SIZE;
   final int x = chunk.getBlockX();
   final int z = chunk.getBlockZ();
   final World world = chunk.getWorld();
   final int seed = (int) (world.getSeed() * 73);
   SHIELD_BASE.setSeed(seed);
   SHIELD.setSeed(seed);
   final double[][] noise = WorldGeneratorUtils.fastNoise(SHIELD, size, size, 4, x, 63, z);
   for (int xx = 0; xx < size; xx++) {
     for (int zz = 0; zz < size; zz++) {
       if (noise[xx][zz] > 0.92) {
         final int y = world.getSurfaceHeight(x + xx, z + zz);
         for (int yy = 0; yy >= -7; yy--) {
           if (yy == 0) {
             final Block block = world.getBlock(x + xx, y + yy, z + zz, world);
             if (!canReplace(block.getMaterial())) {
               continue;
             }
             block.setMaterial(
                 block.getY() <= NormalGenerator.SEA_LEVEL
                     ? VanillaMaterials.STATIONARY_WATER
                     : VanillaMaterials.AIR);
           } else {
             if (canReplace(world.getBlockMaterial(x + xx, y + yy, z + zz))) {
               world.setBlockMaterial(
                   x + xx, y + yy, z + zz, VanillaMaterials.STONE, (short) 0, world);
             }
           }
         }
       }
     }
   }
 }
Exemplo n.º 16
0
  @Override
  public void onInteractBy(Entity entity, Block block, Action type, BlockFace clickedFace) {
    super.onInteractBy(entity, block, type, clickedFace);
    Slot inv = PlayerUtil.getHeldSlot(entity);

    if (inv != null
        && inv.get() != null
        && inv.get().isMaterial(Dye.BONE_MEAL)
        && type.equals(Action.RIGHT_CLICK)) {
      if (!PlayerUtil.isCostSuppressed(entity)) {
        inv.addAmount(-1);
      }
      final Random random = GenericMath.getRandom();
      // Minecraft does grass growing by Bone Meal as follows. Keep in mind the radius is 8.
      // - Tall Grass is placed 9/10 times.
      // - If Tall Grass fails, place Dandelion 2/3 times (within the 1/10 window Tall Grass failed
      // on)
      // - If Dandelion fails, place Rose within the 1/3 times window that Dandelion failed (which
      // is within the 1/10 window Tall Grass failed on).
      for (int dx = -4; dx < 4; dx++) {
        for (int dy = -1; dy <= 1; dy++) {
          for (int dz = -4; dz < 4; dz++) {
            // Fertilization only occurs 1/3 times.
            if (random.nextInt(3) != 2) {
              continue;
            }
            // Grass/flowers have lower chance to go to a lower/higher height than the center block
            // is at.
            // It incurs another 1/3 times. Only do this when iterating over -1 or 1 on the dy,
            // otherwise its on the same
            // plane and we don't care.
            if (dy != 0) {
              if (random.nextInt(3) != 2) {
                continue;
              }
            }

            final Block around = block.translate(dx, dy, dz);

            // Only spread to Grass blocks
            if (!around.getMaterial().equals(VanillaMaterials.GRASS)) {
              continue;
            }

            final Block aboveAround = around.translate(BlockFace.TOP);

            // Make sure the block above the translated one is Air.
            if (!aboveAround.getMaterial().equals(VanillaMaterials.AIR)) {
              continue;
            }

            if (random.nextInt(10) != 0) {
              if (VanillaMaterials.TALL_GRASS.canAttachTo(around, BlockFace.TOP)) {
                aboveAround.setMaterial(VanillaMaterials.TALL_GRASS);
              }
            } else if (random.nextInt(3) != 0) {
              if (VanillaMaterials.DANDELION.canAttachTo(around, BlockFace.TOP)) {
                aboveAround.setMaterial(VanillaMaterials.DANDELION);
              }
            } else {
              if (VanillaMaterials.ROSE.canAttachTo(around, BlockFace.TOP)) {
                aboveAround.setMaterial(VanillaMaterials.ROSE);
              }
            }
          }
        }
      }
    }
  }
Exemplo n.º 17
0
 @Override
 public void place() {
   // rng
   final Random random = getRandom();
   // properties
   final short lenght = (short) (sections * 5 - 1);
   // building objects
   final PieceCuboidBuilder box = new PieceCuboidBuilder(this);
   final SimpleBlockMaterialPicker picker = new SimpleBlockMaterialPicker();
   box.setPicker(picker);
   // the basic tunnel
   picker.setOuterInnerMaterials(VanillaMaterials.AIR, VanillaMaterials.AIR);
   box.setMinMax(0, 0, 0, 2, 1, lenght);
   box.fill();
   box.offsetMinMax(0, 2, 0, 0, 1, 0);
   box.randomFill(0.8f);
   // spider webs for spawner
   if (caveSpiders) {
     picker.setOuterMaterial(VanillaMaterials.WEB);
     box.setMinMax(0, 0, 0, 2, 1, lenght);
     box.randomFill(0.6f);
   }
   // decorate sections
   for (byte section = 0; section < sections; section++) {
     final short sectionZ = (short) (section * 5 + 2);
     // fences
     picker.setOuterMaterial(VanillaMaterials.WOODEN_FENCE);
     box.setMinMax(0, 0, sectionZ, 0, 1, sectionZ);
     box.fill();
     box.offsetMinMax(2, 0, 0, 2, 0, 0);
     box.fill();
     // ceiling planks
     picker.setOuterMaterial(VanillaMaterials.PLANK);
     if (random.nextInt(4) != 0) {
       box.setMinMax(0, 2, sectionZ, 2, 2, sectionZ);
       box.fill();
     } else {
       box.setMinMax(0, 2, sectionZ, 0, 2, sectionZ);
       box.fill();
       box.offsetMinMax(2, 0, 0, 2, 0, 0);
       box.fill();
     }
     // webs and torches
     setBlockMaterial(0.9f, 0, 2, sectionZ - 1, VanillaMaterials.WEB);
     setBlockMaterial(0.9f, 2, 2, sectionZ - 1, VanillaMaterials.WEB);
     setBlockMaterial(0.9f, 0, 2, sectionZ + 1, VanillaMaterials.WEB);
     setBlockMaterial(0.9f, 2, 2, sectionZ + 1, VanillaMaterials.WEB);
     setBlockMaterial(0.95f, 0, 2, sectionZ - 2, VanillaMaterials.WEB);
     setBlockMaterial(0.95f, 2, 2, sectionZ - 2, VanillaMaterials.WEB);
     setBlockMaterial(0.95f, 0, 2, sectionZ + 2, VanillaMaterials.WEB);
     setBlockMaterial(0.95f, 2, 2, sectionZ + 2, VanillaMaterials.WEB);
     attachMaterial(0.95f, 1, 2, sectionZ - 1, VanillaMaterials.TORCH);
     attachMaterial(0.95f, 1, 2, sectionZ + 1, VanillaMaterials.TORCH);
     // loot
     if (random.nextInt(100) == 0) {
       final LootChestObject chest = new LootChestObject(getRandom());
       // TODO: give them proper loot
       placeObject(2, 0, sectionZ - 1, chest);
     }
     if (random.nextInt(100) == 0) {
       final LootChestObject chest = new LootChestObject(getRandom());
       // TODO: give them proper loot
       placeObject(0, 0, sectionZ + 1, chest);
     }
     // spawner
     if (!caveSpiders || hasSpawner) {
       continue;
     }
     hasSpawner = true;
     setBlockMaterial(1, 0, sectionZ + random.nextInt(3), VanillaMaterials.MONSTER_SPAWNER);
   }
   // bridge gaps
   for (byte xx = 0; xx <= 2; xx++) {
     for (byte zz = 0; zz <= lenght; zz++) {
       final Block block = getBlock(xx, -1, zz);
       if (block.isMaterial(VanillaMaterials.AIR)) {
         block.setMaterial(VanillaMaterials.PLANK);
       }
     }
   }
   // rails
   if (hasRails) {
     for (byte zz = 0; zz <= lenght; zz++) {
       if (getBlockMaterial(1, -1, zz).isOpaque()) {
         setBlockMaterial(0.3f, 1, 0, zz, VanillaMaterials.RAIL);
       }
     }
   }
 }
Exemplo n.º 18
0
 @Override
 public void onRandomTick(Block block) {
   if (block.getBlockLight() > 11) {
     block.setMaterial(VanillaMaterials.AIR);
   }
 }
Exemplo n.º 19
0
 @Override
 public void onUpdate(BlockMaterial oldMaterial, Block block) {
   if (block.translate(BlockFace.BOTTOM).isMaterial(VanillaMaterials.AIR)) {
     block.setMaterial(VanillaMaterials.AIR);
   }
 }
Exemplo n.º 20
0
 private static void placeFrame(Block block, BlockFace facing) {
   block.setMaterial(VanillaMaterials.END_PORTAL_FRAME);
   VanillaMaterials.END_PORTAL_FRAME.setFacing(block, facing);
 }