public static List<TransactionOutput> getMyOutputs(Transaction tx, DeterministicKey key) {
List<TransactionOutput> mines = new ArrayList<>();
for (TransactionOutput curr : tx.getOutputs()) {
boolean isMine = false;
String to = null;
Address add = curr.getAddressFromP2PKHScript(BitcoinNetwork.getInstance().get().getParams());
if (add != null) to = add.toString();
else {
add = curr.getAddressFromP2SH(BitcoinNetwork.getInstance().get().getParams());
if (add != null) to = add.toString();
}
if (to != null) { // VERIFICATION BY ADDRESS
isMine = to.equals(keyToStringAddress(key));
} else { // VERIFICATION BY PUBKEY
final byte[] pubKeyCurr = curr.getScriptPubKey().getPubKey();
isMine = Arrays.equals(key.getPubKey(), pubKeyCurr);
}
if (isMine) {
mines.add(curr);
break;
}
}
return mines;
}
@Override
public CoinSelection select(Coin target, List<TransactionOutput> candidates) {
ArrayList<TransactionOutput> selected = new ArrayList<TransactionOutput>();
// Sort the inputs by age*value so we get the highest "coindays" spent.
// TODO: Consider changing the wallets internal format to track just outputs and keep them
// ordered.
ArrayList<TransactionOutput> sortedOutputs = new ArrayList<TransactionOutput>(candidates);
// When calculating the wallet balance, we may be asked to select all possible coins, if so,
// avoid sorting
// them in order to improve performance.
// TODO: Take in network parameters when instanatiated, and then test against the current
// network. Or just have a boolean parameter for "give me everything"
if (!target.equals(NetworkParameters.MAX_MONEY)) {
sortOutputs(sortedOutputs);
}
// Now iterate over the sorted outputs until we have got as close to the target as possible or a
// little
// bit over (excessive value will be change).
long total = 0;
for (TransactionOutput output : sortedOutputs) {
if (total >= target.value) break;
// Only pick chain-included transactions, or transactions that are ours and pending.
if (!shouldSelect(output.getParentTransaction())) continue;
selected.add(output);
total += output.getValue().value;
}
// Total may be lower than target here, if the given candidates were insufficient to create to
// requested
// transaction.
return new CoinSelection(Coin.valueOf(total), selected);
}
@CheckForNull
private static List<Address> getToAddresses(
@Nonnull final Transaction tx, @Nonnull final AbstractWallet pocket, boolean toMe) {
List<Address> addresses = new ArrayList<Address>();
for (final TransactionOutput output : tx.getOutputs()) {
try {
if (output.isMine(pocket) == toMe) {
addresses.add(output.getScriptPubKey().getToAddress(pocket.getCoinType()));
}
} catch (final ScriptException x) {
/* ignore this output */
}
}
return addresses;
}
public static boolean isInternal(@Nonnull final Transaction tx) {
if (tx.isCoinBase()) return false;
final List<TransactionOutput> outputs = tx.getOutputs();
if (outputs.size() != 1) return false;
try {
final TransactionOutput output = outputs.get(0);
final Script scriptPubKey = output.getScriptPubKey();
if (!scriptPubKey.isSentToRawPubKey()) return false;
return true;
} catch (final ScriptException x) {
return false;
}
}
// Create a payment transaction with valueToMe going back to us
private synchronized Wallet.SendRequest makeUnsignedChannelContract(Coin valueToMe) {
Transaction tx = new Transaction(wallet.getParams());
if (!totalValue.subtract(valueToMe).equals(Coin.ZERO)) {
clientOutput.setValue(totalValue.subtract(valueToMe));
tx.addOutput(clientOutput);
}
tx.addInput(multisigContract.getOutput(0));
return Wallet.SendRequest.forTx(tx);
}
private void tryOpenDispute(boolean isSupportTicket) {
if (trade != null) {
Transaction depositTx = trade.getDepositTx();
if (depositTx != null) {
doOpenDispute(isSupportTicket, trade.getDepositTx());
} else {
log.warn("Trade.depositTx is null. We try to find the tx in our wallet.");
List<Transaction> candidates = new ArrayList<>();
List<Transaction> transactions = walletService.getWallet().getRecentTransactions(100, true);
transactions
.stream()
.forEach(
transaction -> {
Coin valueSentFromMe = transaction.getValueSentFromMe(walletService.getWallet());
if (!valueSentFromMe.isZero()) {
// spending tx
for (TransactionOutput transactionOutput : transaction.getOutputs()) {
if (!transactionOutput.isMine(walletService.getWallet())) {
if (transactionOutput.getScriptPubKey().isPayToScriptHash()) {
// MS tx
candidates.add(transaction);
}
}
}
}
});
if (candidates.size() == 1) doOpenDispute(isSupportTicket, candidates.get(0));
else if (candidates.size() > 1)
new SelectDepositTxPopup()
.transactions(candidates)
.onSelect(
transaction -> {
doOpenDispute(isSupportTicket, transaction);
})
.closeButtonText("Cancel")
.show();
else log.error("Trade.depositTx is null and we did not find any MultiSig transaction.");
}
} else {
log.error("Trade is null");
}
}
/**
* Called when the client provides us with a new signature and wishes to increment total payment
* by size. Verifies the provided signature and only updates values if everything checks out. If
* the new refundSize is not the lowest we have seen, it is simply ignored.
*
* @param refundSize How many satoshis of the original contract are refunded to the client (the
* rest are ours)
* @param signatureBytes The new signature spending the multi-sig contract to a new payment
* transaction
* @throws VerificationException If the signature does not verify or size is out of range (incl
* being rejected by the network as dust).
* @return true if there is more value left on the channel, false if it is now fully used up.
*/
public synchronized boolean incrementPayment(Coin refundSize, byte[] signatureBytes)
throws VerificationException, ValueOutOfRangeException, InsufficientMoneyException {
checkState(state == State.READY);
checkNotNull(refundSize);
checkNotNull(signatureBytes);
TransactionSignature signature = TransactionSignature.decodeFromBitcoin(signatureBytes, true);
// We allow snapping to zero for the payment amount because it's treated specially later, but
// not less than
// the dust level because that would prevent the transaction from being relayed/mined.
final boolean fullyUsedUp = refundSize.equals(Coin.ZERO);
if (refundSize.compareTo(clientOutput.getMinNonDustValue()) < 0 && !fullyUsedUp)
throw new ValueOutOfRangeException(
"Attempt to refund negative value or value too small to be accepted by the network");
Coin newValueToMe = totalValue.subtract(refundSize);
if (newValueToMe.signum() < 0)
throw new ValueOutOfRangeException("Attempt to refund more than the contract allows.");
if (newValueToMe.compareTo(bestValueToMe) < 0)
throw new ValueOutOfRangeException("Attempt to roll back payment on the channel.");
// Get the wallet's copy of the multisigContract (ie with confidence information), if this is
// null, the wallet
// was not connected to the peergroup when the contract was broadcast (which may cause issues
// down the road, and
// disables our double-spend check next)
Transaction walletContract = wallet.getTransaction(multisigContract.getHash());
checkNotNull(
walletContract,
"Wallet did not contain multisig contract {} after state was marked READY",
multisigContract.getHash());
// Note that we check for DEAD state here, but this test is essentially useless in production
// because we will
// miss most double-spends due to bloom filtering right now anyway. This will eventually fixed
// by network-wide
// double-spend notifications, so we just wait instead of attempting to add all dependant
// outpoints to our bloom
// filters (and probably missing lots of edge-cases).
if (walletContract.getConfidence().getConfidenceType()
== TransactionConfidence.ConfidenceType.DEAD) {
close();
throw new VerificationException("Multisig contract was double-spent");
}
Transaction.SigHash mode;
// If the client doesn't want anything back, they shouldn't sign any outputs at all.
if (fullyUsedUp) mode = Transaction.SigHash.NONE;
else mode = Transaction.SigHash.SINGLE;
if (signature.sigHashMode() != mode || !signature.anyoneCanPay())
throw new VerificationException(
"New payment signature was not signed with the right SIGHASH flags.");
Wallet.SendRequest req = makeUnsignedChannelContract(newValueToMe);
// Now check the signature is correct.
// Note that the client must sign with SIGHASH_{SINGLE/NONE} | SIGHASH_ANYONECANPAY to allow us
// to add additional
// inputs (in case we need to add significant fee, or something...) and any outputs we want to
// pay to.
Sha256Hash sighash = req.tx.hashForSignature(0, multisigScript, mode, true);
if (!clientKey.verify(sighash, signature))
throw new VerificationException("Signature does not verify on tx\n" + req.tx);
bestValueToMe = newValueToMe;
bestValueSignature = signatureBytes;
updateChannelInWallet();
return !fullyUsedUp;
}
private static Protos.Transaction makeTxProto(WalletTransaction wtx) {
Transaction tx = wtx.getTransaction();
Protos.Transaction.Builder txBuilder = Protos.Transaction.newBuilder();
txBuilder
.setPool(getProtoPool(wtx))
.setHash(hashToByteString(tx.getHash()))
.setVersion((int) tx.getVersion());
if (tx.getUpdateTime() != null) {
txBuilder.setUpdatedAt(tx.getUpdateTime().getTime());
}
if (tx.getLockTime() > 0) {
txBuilder.setLockTime((int) tx.getLockTime());
}
// Handle inputs.
for (TransactionInput input : tx.getInputs()) {
Protos.TransactionInput.Builder inputBuilder =
Protos.TransactionInput.newBuilder()
.setScriptBytes(ByteString.copyFrom(input.getScriptBytes()))
.setTransactionOutPointHash(hashToByteString(input.getOutpoint().getHash()))
.setTransactionOutPointIndex((int) input.getOutpoint().getIndex());
if (input.hasSequence()) inputBuilder.setSequence((int) input.getSequenceNumber());
if (input.getValue() != null) inputBuilder.setValue(input.getValue().value);
txBuilder.addTransactionInput(inputBuilder);
}
// Handle outputs.
for (TransactionOutput output : tx.getOutputs()) {
Protos.TransactionOutput.Builder outputBuilder =
Protos.TransactionOutput.newBuilder()
.setScriptBytes(ByteString.copyFrom(output.getScriptBytes()))
.setValue(output.getValue().value);
final TransactionInput spentBy = output.getSpentBy();
if (spentBy != null) {
Sha256Hash spendingHash = spentBy.getParentTransaction().getHash();
int spentByTransactionIndex = spentBy.getParentTransaction().getInputs().indexOf(spentBy);
outputBuilder
.setSpentByTransactionHash(hashToByteString(spendingHash))
.setSpentByTransactionIndex(spentByTransactionIndex);
}
txBuilder.addTransactionOutput(outputBuilder);
}
// Handle which blocks tx was seen in.
final Map<Sha256Hash, Integer> appearsInHashes = tx.getAppearsInHashes();
if (appearsInHashes != null) {
for (Map.Entry<Sha256Hash, Integer> entry : appearsInHashes.entrySet()) {
txBuilder.addBlockHash(hashToByteString(entry.getKey()));
txBuilder.addBlockRelativityOffsets(entry.getValue());
}
}
if (tx.hasConfidence()) {
TransactionConfidence confidence = tx.getConfidence();
Protos.TransactionConfidence.Builder confidenceBuilder =
Protos.TransactionConfidence.newBuilder();
writeConfidence(txBuilder, confidence, confidenceBuilder);
}
Protos.Transaction.Purpose purpose;
switch (tx.getPurpose()) {
case UNKNOWN:
purpose = Protos.Transaction.Purpose.UNKNOWN;
break;
case USER_PAYMENT:
purpose = Protos.Transaction.Purpose.USER_PAYMENT;
break;
case KEY_ROTATION:
purpose = Protos.Transaction.Purpose.KEY_ROTATION;
break;
case ASSURANCE_CONTRACT_CLAIM:
purpose = Protos.Transaction.Purpose.ASSURANCE_CONTRACT_CLAIM;
break;
case ASSURANCE_CONTRACT_PLEDGE:
purpose = Protos.Transaction.Purpose.ASSURANCE_CONTRACT_PLEDGE;
break;
case ASSURANCE_CONTRACT_STUB:
purpose = Protos.Transaction.Purpose.ASSURANCE_CONTRACT_STUB;
break;
default:
throw new RuntimeException("New tx purpose serialization not implemented.");
}
txBuilder.setPurpose(purpose);
ExchangeRate exchangeRate = tx.getExchangeRate();
if (exchangeRate != null) {
Protos.ExchangeRate.Builder exchangeRateBuilder =
Protos.ExchangeRate.newBuilder()
.setCoinValue(exchangeRate.coin.value)
.setFiatValue(exchangeRate.fiat.value)
.setFiatCurrencyCode(exchangeRate.fiat.currencyCode);
txBuilder.setExchangeRate(exchangeRateBuilder);
}
if (tx.getMemo() != null) txBuilder.setMemo(tx.getMemo());
return txBuilder.build();
}