/**
* Casts the rhs to an {@link AssignableValue} using that interface's standard assignment
* method. i.e.
*
* <pre>
* [AssignableValueType] lhs;
* lhs.[assignMethod](rhs);
* </pre>
*
* or perhaps a type-specific cast:
*
* <pre>
* [AssignableValueType] lhs;
* lhs.[castMethod](rhs, lhs.getPrecision());
* </pre>
*
* <p>Code is also generated to pad and truncate values which need special handling, such as
* date and time types. Plus good old null handling.
*/
private Expression castToAssignableValue() {
ensureLhs();
if (requiresSpecializedCast() && rhsType.isNullable()) {
assert (lhsType.isNullable());
// propagate null value; normally, we can rely on
// assignFrom to do it for us, but for specialized casts,
// we can't
Expression nullTest =
new MethodCall(rhsExp, NullableValue.NULL_IND_ACCESSOR_NAME, new ExpressionList());
addStatement(
new ExpressionStatement(
new MethodCall(
lhsExp, NullableValue.NULL_IND_MUTATOR_NAME, new ExpressionList(nullTest))));
StatementList ifStmtList = new StatementList();
addStatement(new IfStatement(not(nullTest), ifStmtList));
borrowStmtList(ifStmtList);
try {
return castToAssignableValueImpl();
} finally {
returnStmtList(ifStmtList);
}
} else {
return castToAssignableValueImpl();
}
}
/**
* Gets the right hand expression as a valid value to be assigned to the left hand side. Usually
* returns the original rhs. However, if the lhs is of a primitive type, and the rhs is an
* explicit null, returns a primitive value instead.
*/
private Expression rhsAsValue() {
if (SqlTypeUtil.isJavaPrimitive(lhsType) && (rhsType.getSqlTypeName() == SqlTypeName.NULL)) {
if (lhsType.getSqlTypeName() == SqlTypeName.BOOLEAN) {
return Literal.constantFalse();
} else {
return Literal.constantZero();
}
}
return rhsExp;
}
/**
* Burrows into a synthetic record and returns the underlying relation which provides the field
* called <code>fieldName</code>.
*/
public JavaRel implementFieldAccess(JavaRelImplementor implementor, String fieldName) {
if (!isBoxed()) {
return implementor.implementFieldAccess((JavaRel) getChild(), fieldName);
}
RelDataType type = getRowType();
int field = type.getFieldOrdinal(fieldName);
RexLocalRef ref = program.getProjectList().get(field);
final int index = ref.getIndex();
return implementor.findRel((JavaRel) this, program.getExprList().get(index));
}
/** Generates code to throw an exception when a NULL value is casted to a NOT NULL type */
private void checkNotNull() {
if (!lhsType.isNullable() && rhsType.isNullable()) {
rhsExp = rhsAsJava();
addStatement(
new ExpressionStatement(
new MethodCall(
translator.getRelImplementor().getConnectionVariable(),
"checkNotNull",
new ExpressionList(Literal.makeLiteral(targetName), rhsExp))));
}
}
/**
* Implements a cast from any Java primitive to a nullable Java primitive as a simple
* assignment. i.e.
*
* <pre>
* [NullablePrimitiveType] lhs;
* lhs.[nullIndicator] = ...;
* if (! lhs.[nullIndicator]) {
* // check overflow ...
* // round ...
* lhs.[value] = ...;
* }
* </pre>
*/
private Expression castPrimitiveToNullablePrimitive() {
ensureLhs();
boolean nullableSource = rhsType.isNullable();
Expression rhsIsNull;
if (nullableSource) {
rhsIsNull = getNullIndicator(rhsExp);
rhsExp = getValue(rhsType, rhsExp);
} else {
rhsIsNull = Literal.constantFalse();
}
addStatement(assign(getNullIndicator(lhsExp), rhsIsNull));
StatementList setValueBlock = new StatementList();
StatementList oldList = borrowStmtList(setValueBlock);
try {
checkOverflow();
roundAsNeeded();
addStatement(assign(getValue(lhsType, lhsExp), new CastExpression(getLhsClass(), rhsExp)));
} finally {
returnStmtList(oldList);
}
if (nullableSource) {
addStatement(new IfStatement(not(getNullIndicator(lhsExp)), setValueBlock));
} else {
addStatementList(setValueBlock);
}
return lhsExp;
}
/**
* Checks for overflow when assigning one primitive type to another. Non-primitive types check
* for overflow during assignment.
*/
private void checkOverflow() {
String maxLiteral = null;
String minLiteral = null;
if (lhsType == null) {
return;
}
// Assume that equivalent types can be assigned without overflow
if (lhsType.getSqlTypeName() == rhsType.getSqlTypeName()) {
return;
}
// Approximate numerics have a wider range than exact numerics
if (SqlTypeUtil.isApproximateNumeric(lhsType) && SqlTypeUtil.isExactNumeric(rhsType)) {
return;
}
// We can skip an error check if the left type is "larger"
if (SqlTypeUtil.isIntType(lhsType)
&& SqlTypeUtil.isIntType(rhsType)
&& (SqlTypeUtil.maxValue(lhsType) >= SqlTypeUtil.maxValue(rhsType))) {
return;
}
if (SqlTypeUtil.isExactNumeric(lhsType)) {
String numClassName = SqlTypeUtil.getNumericJavaClassName(lhsType);
minLiteral = numClassName + ".MIN_VALUE";
maxLiteral = numClassName + ".MAX_VALUE";
} else if (SqlTypeUtil.isApproximateNumeric(lhsType)) {
String numClassName = SqlTypeUtil.getNumericJavaClassName(lhsType);
maxLiteral = numClassName + ".MAX_VALUE";
minLiteral = "-" + maxLiteral;
}
if (maxLiteral == null) {
return;
}
Statement ifstmt =
new IfStatement(
new BinaryExpression(
new BinaryExpression(
rhsExp, BinaryExpression.LESS, new Literal(Literal.STRING, minLiteral)),
BinaryExpression.LOGICAL_OR,
new BinaryExpression(
rhsExp, BinaryExpression.GREATER, new Literal(Literal.STRING, maxLiteral))),
getThrowStmtList());
addStatement(ifstmt);
}
private boolean requiresSpecializedCast() {
if ((rhsType != null)
&& (SqlTypeUtil.isNumeric(rhsType) || (rhsType.getSqlTypeName() == SqlTypeName.BOOLEAN))
&& SqlTypeUtil.inCharOrBinaryFamilies(lhsType)
&& !SqlTypeUtil.isLob(lhsType)) {
// Boolean or Numeric to String.
// sometimes the Integer got slipped by.
return true;
} else {
return false;
}
}
// implement FarragoOJRexImplementor
public Expression implementFarrago(
FarragoRexToOJTranslator translator, RexCall call, Expression[] operands) {
RelDataType lhsType = call.getType();
RelDataType rhsType = call.operands[0].getType();
Expression rhsExp = operands[0];
SqlTypeName lhsTypeName = lhsType.getSqlTypeName();
if ((lhsTypeName == SqlTypeName.CURSOR) || (lhsTypeName == SqlTypeName.COLUMN_LIST)) {
// Conversion should already have been taken care of outside.
return rhsExp;
}
// NOTE jvs 19-Nov-2008: In some cases (e.g. FRG-273) a cast
// may be illegal at the SQL level, but allowable as part of
// implementation, so don't try to enforce
// SqlTypeUtil.canCastFrom here. Anything which was supposed
// to have been prevented should already have been caught
// by the validator.
CastHelper helper =
new CastHelper(translator, null, call.toString(), lhsType, rhsType, null, rhsExp);
return helper.implement();
}
/**
* Implement the cast expression.
*
* <p>TODO: check for overflow
*
* @return the rhs expression casted as the lhs type
*/
public Expression implement() {
// Check for invalid null assignment. Code generated afterwards
// can assume null will never be assigned to a not null value.
checkNotNull();
// Check for an explicit rhs null value. Code generated
// afterwards need never check for an explicit null.
if (rhsType.getSqlTypeName() == SqlTypeName.NULL) {
if (lhsType.isNullable()) {
return castFromNull();
} else {
// NOTE jvs 27-Jan-2005: this code will never actually
// be executed do to previous checkNotNull test, but
// it still has to compile!
return rhsAsValue();
}
}
// Case when left hand side is a nullable primitive
if (translator.isNullablePrimitive(lhsType)) {
if (SqlTypeUtil.isJavaPrimitive(rhsType)
&& (!rhsType.isNullable() || translator.isNullablePrimitive(rhsType))) {
return castPrimitiveToNullablePrimitive();
}
return castToAssignableValue();
}
// Case when left hand side is a not nullable primitive
if (SqlTypeUtil.isJavaPrimitive(lhsType)) {
return castToNotNullPrimitive();
}
// Case when left hand side is a structure
if (lhsType.isStruct()) {
assert (rhsType.isStruct());
// TODO jvs 27-May-2004: relax this assert and deal with
// conversions, null checks, etc.
assert (lhsType.equals(rhsType));
return getDirectAssignment();
}
// Default is to treat non-primitives as AssignableValue
return castToAssignableValue();
}
/**
* Casts the rhs to a non nullable primitive value. Non nullable primitive values only have a
* single value field.
*/
private Expression castToNotNullPrimitive() {
// If the left and the right types are the same, perform a
// trivial cast.
if (lhsType == rhsType) {
return getDirectAssignment();
}
// Retrieve the value of the right side if it is a nullable
// primitive or a Datetime or an Interval type.
// TODO: is Decimal a nullable primitive?
if (translator.isNullablePrimitive(rhsType)
|| SqlTypeUtil.isDatetime(rhsType)
|| SqlTypeUtil.isInterval(rhsType)) {
rhsExp = getValue(rhsType, rhsExp);
}
// Get the name of the numeric class such as Byte, Short, etc.
String numClassName = SqlTypeUtil.getNumericJavaClassName(lhsType);
OJClass lhsClass = getLhsClass();
// When casting from a string (or binary) to a number, trim the
// value and perform the cast by calling a class-specific parsing
// function.
if ((numClassName != null)
&& SqlTypeUtil.inCharOrBinaryFamilies(rhsType)
&& !SqlTypeUtil.isLob(rhsType)) {
// TODO: toString will cause too much garbage collection.
rhsExp = new MethodCall(rhsExp, "toString", new ExpressionList());
rhsExp = new MethodCall(rhsExp, "trim", new ExpressionList());
String methodName = "parse" + numClassName;
if (lhsType.getSqlTypeName() == SqlTypeName.INTEGER) {
methodName = "parseInt";
}
rhsExp =
new MethodCall(
new Literal(Literal.STRING, numClassName), methodName, new ExpressionList(rhsExp));
Variable outTemp = translator.getRelImplementor().newVariable();
translator.addStatement(
new VariableDeclaration(
TypeName.forOJClass(lhsClass), new VariableDeclarator(outTemp.toString(), rhsExp)));
rhsExp = outTemp;
// Note: this check for overflow should only be required
// when the string conversion does not perform a check.
checkOverflow();
} else if ((lhsType.getSqlTypeName() == SqlTypeName.BOOLEAN)
&& SqlTypeUtil.inCharOrBinaryFamilies(rhsType)
&& !SqlTypeUtil.isLob(rhsType)) {
// Casting from string to boolean relies on the runtime type.
// Note: string is trimmed by conversion method.
// TODO: toString will cause too much garbage collection.
Expression str = new MethodCall(rhsExp, "toString", new ExpressionList());
rhsExp =
new MethodCall(
OJClass.forClass(NullablePrimitive.NullableBoolean.class),
"convertString",
new ExpressionList(str));
} else {
// In general, check for overflow
checkOverflow();
}
roundAsNeeded();
rhsExp = new CastExpression(lhsClass, rhsExp);
return getDirectAssignment();
}
private Expression castToAssignableValueImpl() {
if (requiresSpecializedCast()) {
if (rhsType.isNullable() && (!SqlTypeUtil.isDecimal(rhsType))) {
rhsExp = getValue(rhsType, rhsExp);
}
addStatement(
new ExpressionStatement(
new MethodCall(
lhsExp,
"cast",
new ExpressionList(rhsExp, Literal.makeLiteral(lhsType.getPrecision())))));
} else {
// Set current_date for casting time to timestamp. If
// rhsType is null then we may have to be ready for anything.
// But it will be null even for current_timestamp, so the
// condition below seems a bit excessive.
if ((lhsType.getSqlTypeName() == SqlTypeName.TIMESTAMP)
&& ((rhsType == null) || (rhsType.getSqlTypeName() == SqlTypeName.TIME))) {
addStatement(
new ExpressionStatement(
new MethodCall(lhsExp, "setCurrentDate", new ExpressionList(getCurrentDate()))));
}
addStatement(
new ExpressionStatement(
new MethodCall(
lhsExp, AssignableValue.ASSIGNMENT_METHOD_NAME, new ExpressionList(rhsExp))));
}
// Trim precision of datetime values.
//
if (((lhsType.getSqlTypeName() == SqlTypeName.TIMESTAMP)
|| (lhsType.getSqlTypeName() == SqlTypeName.TIME))) {
if ((rhsType != null)
// FIXME: JavaType(java.sql.Time) and
// JavaType(java.sql.Timestamp) say they support precision
// but do not.
&& !rhsType.toString().startsWith("JavaType(")
&& rhsType.getSqlTypeName().allowsPrec()
&& (lhsType.getPrecision() < rhsType.getPrecision())) {
int lhsPrecision = lhsType.getPrecision();
if (lhsPrecision == -1) {
lhsPrecision = 0;
}
addStatement(
new ExpressionStatement(
new MethodCall(
lhsExp,
SqlDateTimeWithoutTZ.ADJUST_PRECISION_METHOD_NAME,
new ExpressionList(Literal.makeLiteral(lhsPrecision)))));
}
}
boolean mayNeedPadOrTruncate = false;
if (SqlTypeUtil.inCharOrBinaryFamilies(lhsType) && !SqlTypeUtil.isLob(lhsType)) {
mayNeedPadOrTruncate = true;
}
if (mayNeedPadOrTruncate) {
// check overflow if it is datetime.
// TODO: should check it at the run time.
// so, it should be in the
// cast(SqlDateTimeWithTZ, int precision);
if ((rhsType != null) && (rhsType.getSqlTypeName() != null)) {
SqlTypeName typeName = rhsType.getSqlTypeName();
int precision = 0;
switch (typeName) {
case DATE:
precision = 10;
break;
case TIME:
precision = 8;
break;
case TIMESTAMP:
precision = 19;
break;
}
if ((precision != 0) && (precision > lhsType.getPrecision())) {
addStatement(
new IfStatement(
new BinaryExpression(
Literal.makeLiteral(precision),
BinaryExpression.GREATER,
Literal.makeLiteral(lhsType.getPrecision())),
getThrowStmtList()));
}
}
if ((rhsType != null)
&& (rhsType.getFamily() == lhsType.getFamily())
&& !SqlTypeUtil.isLob(rhsType)) {
// we may be able to skip pad/truncate based on
// known facts about source and target precisions
if (SqlTypeUtil.isBoundedVariableWidth(lhsType)) {
if (lhsType.getPrecision() >= rhsType.getPrecision()) {
// target precision is greater than source
// precision, so truncation is impossible
// and we can skip adjustment
return lhsExp;
}
} else {
if ((lhsType.getPrecision() == rhsType.getPrecision())
&& !SqlTypeUtil.isBoundedVariableWidth(rhsType)) {
// source and target are both fixed-width, and
// precisions are the same, so there's no adjustment
// needed
return lhsExp;
}
}
}
// determine target precision
Expression precisionExp = Literal.makeLiteral(lhsType.getPrecision());
// need to pad only for fixed width
Expression needPadExp = Literal.makeLiteral(!SqlTypeUtil.isBoundedVariableWidth(lhsType));
// pad character is 0 for binary, space for character
Expression padByteExp;
if (!SqlTypeUtil.inCharFamily(lhsType)) {
padByteExp = new CastExpression(OJSystem.BYTE, Literal.makeLiteral(0));
} else {
padByteExp = new CastExpression(OJSystem.BYTE, Literal.makeLiteral(' '));
}
// generate the call to do the job
addStatement(
new ExpressionStatement(
new MethodCall(
lhsExp,
BytePointer.ENFORCE_PRECISION_METHOD_NAME,
new ExpressionList(precisionExp, needPadExp, padByteExp))));
}
return lhsExp;
}
/**
* Generates code for a Java expression satisfying the {@link org.eigenbase.runtime.TupleIter}
* interface. The generated code allocates a {@link org.eigenbase.runtime.CalcTupleIter} with a
* dynamic {@link org.eigenbase.runtime.TupleIter#fetchNext()} method. If the "abort on error"
* flag is false, or an error handling tag is specified, then fetchNext is written to handle row
* errors.
*
* <p>Row errors are handled by wrapping expressions that can fail with a try/catch block. A
* caught RuntimeException is then published to an "connection variable." In the event that errors
* can overflow, an "error buffering" flag allows them to be posted again on the next iteration of
* fetchNext.
*
* @param implementor an object that implements relations as Java code
* @param rel the relation to be implemented
* @param childExp the implemented child of the relation
* @param varInputRow the Java variable to use for the input row
* @param inputRowType the rel data type of the input row
* @param outputRowType the rel data type of the output row
* @param program the rex program to implemented by the relation
* @param tag an error handling tag
* @return a Java expression satisfying the TupleIter interface
*/
public static Expression implementAbstractTupleIter(
JavaRelImplementor implementor,
JavaRel rel,
Expression childExp,
Variable varInputRow,
final RelDataType inputRowType,
final RelDataType outputRowType,
RexProgram program,
String tag) {
MemberDeclarationList memberList = new MemberDeclarationList();
// Perform error recovery if continuing on errors or if
// an error handling tag has been specified
boolean errorRecovery = !abortOnError || (tag != null);
// Error buffering should not be enabled unless error recovery is
assert !errorBuffering || errorRecovery;
// Allow backwards compatibility until all Farrago extensions are
// satisfied with the new error handling semantics. The new semantics
// include:
// (1) cast input object to input row object outside of try block,
// should be fine, at least for base Farrago
// (2) maintain a columnIndex counter to better locate of error,
// at the cost of a few cycles
// (3) publish errors to the runtime context. FarragoRuntimeContext
// now supports this API
boolean backwardsCompatible = true;
if (tag != null) {
backwardsCompatible = false;
}
RelDataTypeFactory typeFactory = implementor.getTypeFactory();
OJClass outputRowClass = OJUtil.typeToOJClass(outputRowType, typeFactory);
OJClass inputRowClass = OJUtil.typeToOJClass(inputRowType, typeFactory);
Variable varOutputRow = implementor.newVariable();
FieldDeclaration inputRowVarDecl =
new FieldDeclaration(
new ModifierList(ModifierList.PRIVATE),
TypeName.forOJClass(inputRowClass),
varInputRow.toString(),
null);
FieldDeclaration outputRowVarDecl =
new FieldDeclaration(
new ModifierList(ModifierList.PRIVATE),
TypeName.forOJClass(outputRowClass),
varOutputRow.toString(),
new AllocationExpression(outputRowClass, new ExpressionList()));
// The method body for fetchNext, a main target of code generation
StatementList nextMethodBody = new StatementList();
// First, post an error if it overflowed the previous time
// if (pendingError) {
// rc = handleRowError(...);
// if (rc instanceof NoDataReason) {
// return rc;
// }
// pendingError = false;
// }
if (errorBuffering) {
// add to next method body...
}
// Most of fetchNext falls within a while() block. The while block
// allows us to try multiple input rows against a filter condition
// before returning a single row.
// while (true) {
// Object varInputObj = inputIterator.fetchNext();
// if (varInputObj instanceof TupleIter.NoDataReason) {
// return varInputObj;
// }
// varInputRow = (InputRowClass) varInputObj;
// int columnIndex = 0;
// [calculation statements]
// }
StatementList whileBody = new StatementList();
Variable varInputObj = implementor.newVariable();
whileBody.add(
new VariableDeclaration(
OJUtil.typeNameForClass(Object.class),
varInputObj.toString(),
new MethodCall(new FieldAccess("inputIterator"), "fetchNext", new ExpressionList())));
StatementList ifNoDataReasonBody = new StatementList();
whileBody.add(
new IfStatement(
new InstanceofExpression(
varInputObj, OJUtil.typeNameForClass(TupleIter.NoDataReason.class)),
ifNoDataReasonBody));
ifNoDataReasonBody.add(new ReturnStatement(varInputObj));
// Push up the row declaration for new error handling so that the
// input row is available to the error handler
if (!backwardsCompatible) {
whileBody.add(assignInputRow(inputRowClass, varInputRow, varInputObj));
}
Variable varColumnIndex = null;
if (errorRecovery && !backwardsCompatible) {
// NOTE jvs 7-Oct-2006: Declare varColumnIndex as a member
// (rather than a local) in case in the future we want
// to decompose complex expressions into helper methods.
varColumnIndex = implementor.newVariable();
FieldDeclaration varColumnIndexDecl =
new FieldDeclaration(
new ModifierList(ModifierList.PRIVATE),
OJUtil.typeNameForClass(int.class),
varColumnIndex.toString(),
null);
memberList.add(varColumnIndexDecl);
whileBody.add(
new ExpressionStatement(
new AssignmentExpression(
varColumnIndex, AssignmentExpression.EQUALS, Literal.makeLiteral(0))));
}
// Calculator (projection, filtering) statements are later appended
// to calcStmts. Typically, this target will be the while list itself.
StatementList calcStmts;
if (!errorRecovery) {
calcStmts = whileBody;
} else {
// For error recovery, we wrap the calc statements
// (e.g., everything but the code that reads rows from the
// inputIterator) in a try/catch that publishes exceptions.
calcStmts = new StatementList();
// try { /* calcStmts */ }
// catch(RuntimeException ex) {
// Object rc = connection.handleRowError(...);
// [buffer error if necessary]
// }
StatementList catchStmts = new StatementList();
if (backwardsCompatible) {
catchStmts.add(
new ExpressionStatement(
new MethodCall(
new MethodCall(
OJUtil.typeNameForClass(EigenbaseTrace.class), "getStatementTracer", null),
"log",
new ExpressionList(
new FieldAccess(OJUtil.typeNameForClass(Level.class), "WARNING"),
Literal.makeLiteral("java calc exception"),
new FieldAccess("ex")))));
} else {
Variable varRc = implementor.newVariable();
ExpressionList handleRowErrorArgs =
new ExpressionList(varInputRow, new FieldAccess("ex"), varColumnIndex);
handleRowErrorArgs.add(Literal.makeLiteral(tag));
catchStmts.add(
new VariableDeclaration(
OJUtil.typeNameForClass(Object.class),
varRc.toString(),
new MethodCall(
implementor.getConnectionVariable(), "handleRowError", handleRowErrorArgs)));
// Buffer an error if it overflowed
// if (rc instanceof NoDataReason) {
// pendingError = true;
// [save error state]
// return rc;
// }
if (errorBuffering) {
// add to catch statements...
}
}
CatchList catchList =
new CatchList(
new CatchBlock(
new Parameter(OJUtil.typeNameForClass(RuntimeException.class), "ex"),
catchStmts));
TryStatement tryStmt = new TryStatement(calcStmts, catchList);
whileBody.add(tryStmt);
}
if (backwardsCompatible) {
calcStmts.add(assignInputRow(inputRowClass, varInputRow, varInputObj));
}
StatementList condBody;
RexToOJTranslator translator = implementor.newStmtTranslator(rel, calcStmts, memberList);
try {
translator.pushProgram(program);
if (program.getCondition() != null) {
// TODO jvs 8-Oct-2006: move condition to its own
// method if big, as below for project exprs.
condBody = new StatementList();
RexNode rexIsTrue =
rel.getCluster()
.getRexBuilder()
.makeCall(SqlStdOperatorTable.isTrueOperator, program.getCondition());
Expression conditionExp = translator.translateRexNode(rexIsTrue);
calcStmts.add(new IfStatement(conditionExp, condBody));
} else {
condBody = calcStmts;
}
RelDataTypeField[] fields = outputRowType.getFields();
final List<RexLocalRef> projectRefList = program.getProjectList();
int i = -1;
for (RexLocalRef rhs : projectRefList) {
// NOTE jvs 14-Sept-2006: Put complicated project expressions
// into their own method, otherwise a big select list can easily
// blow the 64K Java limit on method bytecode size. Make
// methods private final in the hopes that they will get inlined
// JIT. For now we decide "complicated" based on the size of
// the generated Java parse tree. A big enough select list of
// simple expressions could still blow the limit, so we may need
// to group them together, sub-divide, etc.
StatementList projMethodBody = new StatementList();
if (errorRecovery && !backwardsCompatible) {
projMethodBody.add(
new ExpressionStatement(
new UnaryExpression(varColumnIndex, UnaryExpression.POST_INCREMENT)));
}
++i;
RexToOJTranslator projTranslator = translator.push(projMethodBody);
String javaFieldName = Util.toJavaId(fields[i].getName(), i);
Expression lhs = new FieldAccess(varOutputRow, javaFieldName);
projTranslator.translateAssignment(fields[i], lhs, rhs);
int complexity = OJUtil.countParseTreeNodes(projMethodBody);
// REVIEW: HCP 5/18/2011
// The projMethod should be checked
// for causing possible compiler errors caused by the use of
// variables declared in other projMethods. Also the
// local declaration of variabled used by other proj methods
// should also be checked.
// Fixing for backswing integration 14270
// TODO: check if abstracting this method body will cause
// a compiler error
if (true) {
// No method needed; just append.
condBody.addAll(projMethodBody);
continue;
}
// Need a separate method.
String projMethodName = "calc_" + varOutputRow.toString() + "_f_" + i;
MemberDeclaration projMethodDecl =
new MethodDeclaration(
new ModifierList(ModifierList.PRIVATE | ModifierList.FINAL),
TypeName.forOJClass(OJSystem.VOID),
projMethodName,
new ParameterList(),
null,
projMethodBody);
memberList.add(projMethodDecl);
condBody.add(new ExpressionStatement(new MethodCall(projMethodName, new ExpressionList())));
}
} finally {
translator.popProgram(program);
}
condBody.add(new ReturnStatement(varOutputRow));
WhileStatement whileStmt = new WhileStatement(Literal.makeLiteral(true), whileBody);
nextMethodBody.add(whileStmt);
MemberDeclaration fetchNextMethodDecl =
new MethodDeclaration(
new ModifierList(ModifierList.PUBLIC),
OJUtil.typeNameForClass(Object.class),
"fetchNext",
new ParameterList(),
null,
nextMethodBody);
// The restart() method should reset variables used to buffer errors
// pendingError = false
if (errorBuffering) {
// declare refinement of restart() and add to member list...
}
memberList.add(inputRowVarDecl);
memberList.add(outputRowVarDecl);
memberList.add(fetchNextMethodDecl);
Expression newTupleIterExp =
new AllocationExpression(
OJUtil.typeNameForClass(CalcTupleIter.class), new ExpressionList(childExp), memberList);
return newTupleIterExp;
}