@Override
public void onReceive(final Context context, final Intent intent) {
final BluetoothDevice device = intent.getParcelableExtra(BluetoothDevice.EXTRA_DEVICE);
// Skip other devices
if (mBluetoothGatt == null
|| !device.getAddress().equals(mBluetoothGatt.getDevice().getAddress())) return;
// String values are used as the constants are not available for Android 4.3.
final int variant =
intent.getIntExtra(
"android.bluetooth.device.extra.PAIRING_VARIANT" /*BluetoothDevice.EXTRA_PAIRING_VARIANT*/,
0);
Logger.d(
mLogSession,
"[Broadcast] Action received: android.bluetooth.device.action.PAIRING_REQUEST" /*BluetoothDevice.ACTION_PAIRING_REQUEST*/
+ ", pairing variant: "
+ pairingVariantToString(variant)
+ " ("
+ variant
+ ")");
// The API below is available for Android 4.4 or newer.
// An app may set the PIN here or set pairing confirmation (depending on the variant)
// using:
// device.setPin(new byte[] { '1', '2', '3', '4', '5', '6' });
// device.setPairingConfirmation(true);
}
/**
* Connects to the Bluetooth Smart device
*
* @param device a device to connect to
*/
public void connect(final BluetoothDevice device) {
if (mConnected) return;
if (mBluetoothGatt != null) {
Logger.d(mLogSession, "gatt.close()");
mBluetoothGatt.close();
mBluetoothGatt = null;
}
final boolean autoConnect = shouldAutoConnect();
mUserDisconnected =
!autoConnect; // We will receive Linkloss events only when the device is connected with
// autoConnect=true
Logger.v(mLogSession, "Connecting...");
Logger.d(mLogSession, "gatt = device.connectGatt(autoConnect = " + autoConnect + ")");
mBluetoothGatt = device.connectGatt(mContext, autoConnect, getGattCallback());
}
@Override
public void onReceive(final Context context, final Intent intent) {
final BluetoothDevice device = intent.getParcelableExtra(BluetoothDevice.EXTRA_DEVICE);
final int bondState = intent.getIntExtra(BluetoothDevice.EXTRA_BOND_STATE, -1);
final int previousBondState =
intent.getIntExtra(BluetoothDevice.EXTRA_PREVIOUS_BOND_STATE, -1);
// Skip other devices
if (mBluetoothGatt == null
|| !device.getAddress().equals(mBluetoothGatt.getDevice().getAddress())) return;
Logger.d(
mLogSession,
"[Broadcast] Action received: "
+ BluetoothDevice.ACTION_BOND_STATE_CHANGED
+ ", bond state changed to: "
+ bondStateToString(bondState)
+ " ("
+ bondState
+ ")");
DebugLogger.i(
TAG,
"Bond state changed for: "
+ device.getName()
+ " new state: "
+ bondState
+ " previous: "
+ previousBondState);
switch (bondState) {
case BluetoothDevice.BOND_BONDING:
mCallbacks.onBondingRequired();
break;
case BluetoothDevice.BOND_BONDED:
Logger.i(mLogSession, "Device bonded");
mCallbacks.onBonded();
// Start initializing again.
// In fact, bonding forces additional, internal service discovery (at least on Nexus
// devices), so this method may safely be used to start this process again.
Logger.v(mLogSession, "Discovering Services...");
Logger.d(mLogSession, "gatt.discoverServices()");
mBluetoothGatt.discoverServices();
break;
}
}
/**
* This method tries to enable notifications on the Battery Level characteristic.
*
* @param enable <code>true</code> to enable battery notifications, false to disable
* @return true if request has been sent
*/
public boolean setBatteryNotifications(final boolean enable) {
final BluetoothGatt gatt = mBluetoothGatt;
if (gatt == null) {
return false;
}
final BluetoothGattService batteryService = gatt.getService(BATTERY_SERVICE);
if (batteryService == null) return false;
final BluetoothGattCharacteristic batteryLevelCharacteristic =
batteryService.getCharacteristic(BATTERY_LEVEL_CHARACTERISTIC);
if (batteryLevelCharacteristic == null) return false;
// Check characteristic property
final int properties = batteryLevelCharacteristic.getProperties();
if ((properties & BluetoothGattCharacteristic.PROPERTY_NOTIFY) == 0) return false;
gatt.setCharacteristicNotification(batteryLevelCharacteristic, enable);
final BluetoothGattDescriptor descriptor =
batteryLevelCharacteristic.getDescriptor(CLIENT_CHARACTERISTIC_CONFIG_DESCRIPTOR_UUID);
if (descriptor != null) {
if (enable) {
descriptor.setValue(BluetoothGattDescriptor.ENABLE_NOTIFICATION_VALUE);
Logger.a(mLogSession, "Enabling battery level notifications...");
Logger.v(mLogSession, "Enabling notifications for " + BATTERY_LEVEL_CHARACTERISTIC);
Logger.d(
mLogSession,
"gatt.writeDescriptor("
+ CLIENT_CHARACTERISTIC_CONFIG_DESCRIPTOR_UUID
+ ", value=0x01-00)");
} else {
descriptor.setValue(BluetoothGattDescriptor.DISABLE_NOTIFICATION_VALUE);
Logger.a(mLogSession, "Disabling battery level notifications...");
Logger.v(mLogSession, "Disabling notifications for " + BATTERY_LEVEL_CHARACTERISTIC);
Logger.d(
mLogSession,
"gatt.writeDescriptor("
+ CLIENT_CHARACTERISTIC_CONFIG_DESCRIPTOR_UUID
+ ", value=0x00-00)");
}
return gatt.writeDescriptor(descriptor);
}
return false;
}
/**
* Sends the read request to the given characteristic.
*
* @param characteristic the characteristic to read
* @return true if request has been sent
*/
protected final boolean readCharacteristic(final BluetoothGattCharacteristic characteristic) {
final BluetoothGatt gatt = mBluetoothGatt;
if (gatt == null || characteristic == null) return false;
// Check characteristic property
final int properties = characteristic.getProperties();
if ((properties & BluetoothGattCharacteristic.PROPERTY_READ) == 0) return false;
Logger.v(mLogSession, "Reading characteristic " + characteristic.getUuid());
Logger.d(mLogSession, "gatt.readCharacteristic(" + characteristic.getUuid() + ")");
return gatt.readCharacteristic(characteristic);
}
/**
* Disconnects from the device. Does nothing if not connected.
*
* @return true if device is to be disconnected. False if it was already disconnected.
*/
public boolean disconnect() {
mUserDisconnected = true;
if (mConnected && mBluetoothGatt != null) {
Logger.v(mLogSession, "Disconnecting...");
mCallbacks.onDeviceDisconnecting();
Logger.d(mLogSession, "gatt.disconnect()");
mBluetoothGatt.disconnect();
return true;
}
return false;
}
/**
* Writes the characteristic value to the given characteristic.
*
* @param characteristic the characteristic to write to
* @return true if request has been sent
*/
protected final boolean writeCharacteristic(final BluetoothGattCharacteristic characteristic) {
final BluetoothGatt gatt = mBluetoothGatt;
if (gatt == null || characteristic == null) return false;
// Check characteristic property
final int properties = characteristic.getProperties();
if ((properties
& (BluetoothGattCharacteristic.PROPERTY_WRITE
| BluetoothGattCharacteristic.PROPERTY_WRITE_NO_RESPONSE))
== 0) return false;
Logger.v(mLogSession, "Writing characteristic " + characteristic.getUuid());
Logger.d(mLogSession, "gatt.writeCharacteristic(" + characteristic.getUuid() + ")");
return gatt.writeCharacteristic(characteristic);
}
/**
* Enables indications on given characteristic
*
* @return true is the request has been sent, false if one of the arguments was <code>null</code>
* or the characteristic does not have the CCCD.
*/
protected final boolean enableIndications(final BluetoothGattCharacteristic characteristic) {
final BluetoothGatt gatt = mBluetoothGatt;
if (gatt == null || characteristic == null) return false;
// Check characteristic property
final int properties = characteristic.getProperties();
if ((properties & BluetoothGattCharacteristic.PROPERTY_INDICATE) == 0) return false;
gatt.setCharacteristicNotification(characteristic, true);
final BluetoothGattDescriptor descriptor =
characteristic.getDescriptor(CLIENT_CHARACTERISTIC_CONFIG_DESCRIPTOR_UUID);
if (descriptor != null) {
descriptor.setValue(BluetoothGattDescriptor.ENABLE_INDICATION_VALUE);
Logger.v(mLogSession, "Enabling indications for " + characteristic.getUuid());
Logger.d(
mLogSession,
"gatt.writeDescriptor("
+ CLIENT_CHARACTERISTIC_CONFIG_DESCRIPTOR_UUID
+ ", value=0x02-00)");
return gatt.writeDescriptor(descriptor);
}
return false;
}
@Override
public final void onConnectionStateChange(
final BluetoothGatt gatt, final int status, final int newState) {
Logger.d(
mLogSession,
"[Callback] Connection state changed with status: "
+ status
+ " and new state: "
+ newState
+ " ("
+ stateToString(newState)
+ ")");
if (status == BluetoothGatt.GATT_SUCCESS && newState == BluetoothProfile.STATE_CONNECTED) {
// Notify the parent activity/service
Logger.i(mLogSession, "Connected to " + gatt.getDevice().getAddress());
mConnected = true;
mCallbacks.onDeviceConnected();
/*
* The onConnectionStateChange event is triggered just after the Android connects to a device.
* In case of bonded devices, the encryption is reestablished AFTER this callback is called.
* Moreover, when the device has Service Changed indication enabled, and the list of services has changed (e.g. using the DFU),
* the indication is received few milliseconds later, depending on the connection interval.
* When received, Android will start performing a service discovery operation itself, internally.
*
* If the mBluetoothGatt.discoverServices() method would be invoked here, if would returned cached services,
* as the SC indication wouldn't be received yet.
* Therefore we have to postpone the service discovery operation until we are (almost, as there is no such callback) sure, that it had to be handled.
* Our tests has shown that 600 ms is enough. It is important to call it AFTER receiving the SC indication, but not necessarily
* after Android finishes the internal service discovery.
*
* NOTE: This applies only for bonded devices with Service Changed characteristic, but to be sure we will postpone
* service discovery for all devices.
*/
mHandler.postDelayed(
new Runnable() {
@Override
public void run() {
// Some proximity tags (e.g. nRF PROXIMITY) initialize bonding automatically when
// connected.
if (gatt.getDevice().getBondState() != BluetoothDevice.BOND_BONDING) {
Logger.v(mLogSession, "Discovering Services...");
Logger.d(mLogSession, "gatt.discoverServices()");
gatt.discoverServices();
}
}
},
600);
} else {
if (newState == BluetoothProfile.STATE_DISCONNECTED) {
if (status != BluetoothGatt.GATT_SUCCESS)
Logger.w(
mLogSession,
"Error: (0x"
+ Integer.toHexString(status)
+ "): "
+ GattError.parseConnectionError(status));
onDeviceDisconnected();
mConnected = false;
if (mUserDisconnected) {
Logger.i(mLogSession, "Disconnected");
mCallbacks.onDeviceDisconnected();
close();
} else {
Logger.w(mLogSession, "Connection lost");
mCallbacks.onLinklossOccur();
// We are not closing the connection here as the device should try to reconnect
// automatically.
// This may be only called when the shouldAutoConnect() method returned true.
}
return;
}
// TODO Should the disconnect method be called or the connection is still valid? Does this
// ever happen?
Logger.e(
mLogSession,
"Error (0x"
+ Integer.toHexString(status)
+ "): "
+ GattError.parseConnectionError(status));
mCallbacks.onError(ERROR_CONNECTION_STATE_CHANGE, status);
}
}
