Exemplo n.º 1
1
  /**
   * If the outbound level is BINARY, convert the string field to binary, then pad to the left with
   * the appropriate number of zero bits to reach a number of bits specified by the bitLength
   * attribute of the TDT definition file.
   */
  private void binaryPadding(Map<String, String> extraparams, Field tdtfield) {
    String fieldname = tdtfield.getName();
    int reqbitlength = tdtfield.getBitLength();
    String value;

    String binaryValue = fieldToBinary(tdtfield, extraparams);
    if (binaryValue.length() < reqbitlength) {
      int extraBitLength = reqbitlength - binaryValue.length();

      StringBuilder zeroPaddedBinaryValue = new StringBuilder("");
      for (int i = 0; i < extraBitLength; i++) {
        zeroPaddedBinaryValue.append("0");
      }
      zeroPaddedBinaryValue.append(binaryValue);
      value = zeroPaddedBinaryValue.toString();
    } else {
      if (binaryValue.length() > reqbitlength)
        throw new TDTException(
            "Binary value ["
                + binaryValue
                + "] for field "
                + fieldname
                + " exceeds maximum allowed "
                + reqbitlength
                + " bits.  Decimal value was "
                + extraparams.get(fieldname));

      value = binaryValue;
    }
    extraparams.put(fieldname, value);
  }
Exemplo n.º 2
0
  private AlbumBean addOrUpdateAlbum(
      Map<Integer, AlbumBean> map, SongBean song, boolean albumOnly) {
    // Add an album bean
    if (song != null && song.getAlbum() != null) {
      int hashCode = (song.getAlbum() + (albumOnly ? "" : '\uFFFF' + song.getArtist())).hashCode();

      // Check if the album beam already exists
      AlbumBean album = map.get(hashCode);
      if (album == null) {
        album = new AlbumBean();
        album.setAlbum(song.getAlbum());
        map.put(hashCode, album);
      }

      // Update the album properties
      try {
        // Add the track id to the album bean
        album.addSong(song);
        album.incTracks();
        album.setArtist(song.getArtist());
        album.setGenre(song.getGenre());
        album.setDisc_Count(song.getDisc_Count());
      } catch (LibraryException le) {
        // There was an error adding the song to this album, remove it
        map.remove(hashCode);

        // Add to warning message
        warningList.add(song.getName() + " " + le);
      }

      return album;
    }

    return null;
  }
Exemplo n.º 3
0
 /**
  * converts a map to string
  *
  * @param map the map to convert
  * @param nvSep the nvp separator
  * @param entrySep the separator of each entry
  * @return the serialised map.
  */
 public static String convertMapToString(Map<String, String> map, String nvSep, String entrySep) {
   StringBuffer sb = new StringBuffer();
   if (map != null) {
     for (Entry<String, String> entry : map.entrySet()) {
       String el = entry.getKey();
       sb.append(convertEntryToString(el, map.get(el), nvSep)).append(entrySep);
     }
   }
   String repr = sb.toString();
   int pos = repr.lastIndexOf(entrySep);
   return repr.substring(0, pos);
 }
Exemplo n.º 4
0
  /**
   * Returns a string built using a particular grammar. Single-quotes strings are counted as literal
   * strings, whereas all other strings appearing in the grammar require substitution with the
   * corresponding value from the extraparams hashmap.
   */
  private String buildGrammar(String grammar, Map<String, String> extraparams) {
    StringBuilder outboundstring = new StringBuilder();
    String[] fields = Pattern.compile("\\s+").split(grammar);
    for (int i = 0; i < fields.length; i++) {
      if (fields[i].substring(0, 1).equals("'")) {
        outboundstring.append(fields[i].substring(1, fields[i].length() - 1));
      } else {
        outboundstring.append(extraparams.get(fields[i]));
      }
    }

    return outboundstring.toString();
  }
Exemplo n.º 5
0
  /**
   * The convert method translates a String input to a specified outbound level of the same coding
   * scheme. For example, the input string value may be a tag-encoding URI and the outbound level
   * specified by string outboundlevel may be BINARY, in which case the return value is a binary
   * representation expressed as a string.
   *
   * @param input the identifier to be converted.
   * @param inputParameters additional parameters which need to be provided because they cannot
   *     always be determined from the input value alone. Examples include the taglength,
   *     companyprefixlength and filter values.
   * @param outputLevel the outbound level required for the ouput. Permitted values include BINARY,
   *     TAG_ENCODING, PURE_IDENTITY, LEGACY and ONS_HOSTNAME.
   * @return the identifier converted to the output level.
   */
  public String convert(
      String input, Map<String, String> inputParameters, LevelTypeList outputLevel) {

    TagLengthList tagLength = null;
    if (inputParameters.containsKey("taglength")) {
      // in principle, the user should provide a
      // TagLengthList object in the parameter list.
      String s = inputParameters.get("taglength");
      tagLength = TagLengthList.valueOf(s);
    }

    PrefixMatch match = findPrefixMatch(input, tagLength);

    return convertLevel(match.getScheme(), match.getLevel(), input, inputParameters, outputLevel);
  }
Exemplo n.º 6
0
 /**
  * Returns the value of a specified fieldname from the specified hashmap and returns an integer
  * value or throws an exception if the value is not an integer
  */
 private int getIntValue(String fieldname, Map<String, String> extraparams) {
   Matcher checkint = Pattern.compile("^\\d+$").matcher(fieldname);
   int rv;
   if (checkint.matches()) {
     rv = Integer.parseInt(fieldname);
   } else {
     if (extraparams.containsKey(fieldname)) {
       rv = Integer.parseInt(extraparams.get(fieldname));
     } else {
       rv = -1;
       throw new TDTException(
           "No integer value for " + fieldname + " can be found - check extraparams");
     }
   }
   return rv;
 }
Exemplo n.º 7
0
  /** pad a value according the field definition. */
  private void padField(Map<String, String> extraparams, Field field) {
    String name = field.getName();
    String value = extraparams.get(name);
    PadDirectionList padDir = field.getPadDir();
    int requiredLength = field.getLength();

    // assert value != null;
    if (value == null) return;

    String padCharString = field.getPadChar();
    // if no pad char specified, don't attempt padding
    if (padCharString == null) return;
    assert padCharString.length() > 0;
    char padChar = padCharString.charAt(0);

    StringBuilder buf = new StringBuilder(requiredLength);
    if (padDir == PadDirectionList.LEFT) {
      for (int i = 0; i < requiredLength - value.length(); i++) buf.append(padChar);
      buf.append(value);
    } else if (padDir == PadDirectionList.RIGHT) {
      buf.append(value);
      for (int i = 0; i < requiredLength - value.length(); i++) buf.append(padChar);
    }
    assert buf.length() == requiredLength;
    if (requiredLength != value.length()) {
      // System.out.println("    updated " + name + " to '" + buf + "'");
      extraparams.put(name, buf.toString());
    }
    /*
    else {
        StringBuilder mybuf = new StringBuilder();
        for (int i = 0; i < value.length(); i++) {
    	if (i > 0)
    	    mybuf.append(',');
    	mybuf.append('\'');
    	mybuf.append(value.charAt(i));
    	mybuf.append('\'');
        }


        System.out.println("    field " + name + " not padded as " + mybuf.toString() + " is already " + requiredLength + " characters long");
    }
    */
  }
Exemplo n.º 8
0
  /**
   * Converts the value of a specified fieldname from the extraparams map into binary, either
   * handling it as a large integer or taking into account the compaction of each ASCII byte that is
   * specified in the TDT definition file for that particular field
   */
  private String fieldToBinary(Field field, Map<String, String> extraparams) {
    // really need an index to find field number given fieldname;

    String fieldname = field.getName();
    String value = extraparams.get(fieldname);
    CompactionMethodList compaction = field.getCompaction();

    if (compaction == null) {
      value = dec2bin(value);
    } else {
      if (compaction == CompactionMethodList.VALUE_5) {
        value = uppercasefive2bin(value);
      } else if (compaction == CompactionMethodList.VALUE_4) {
        value = alphanumsix2bin(value);
      } else if (compaction == CompactionMethodList.VALUE_3) {
        value = asciiseven2bin(value);
      } else if (compaction == CompactionMethodList.VALUE_2) {
        value = bytestring2bin(value);
      } else throw new Error("Unsupported compaction " + compaction);
    }

    return value;
  }
Exemplo n.º 9
0
 public static AUTH_TYPE getByConfigName(String configName) {
   return LOOKUP.get(configName);
 }
Exemplo n.º 10
0
  private void processTxt(Node operation) {
    List<Node> targets = getChildNodes(operation, "target");
    List<Node> optionNodes = getChildNodes(operation, "opt");
    List<Node> separatorNode = getChildNodes(operation, "separator");
    if (targets.isEmpty() || optionNodes.isEmpty()) {
      return;
    }
    String defaultSeparator = "=";
    String globalSeparator = defaultSeparator;
    if (!separatorNode.isEmpty()) {
      globalSeparator = separatorNode.get(0).getTextContent();
      if (globalSeparator.length() != 1) {
        globalSeparator = defaultSeparator;
      }
    }
    Map<String, String> options = new HashMap<String, String>();
    Map<String, String> processedOptions = new HashMap<String, String>();
    for (int i = 0; i < optionNodes.size(); i++) {
      Node option = optionNodes.get(i);
      String name = option.getAttributes().getNamedItem("name").getNodeValue();
      String value = option.getTextContent();
      if (options.containsKey(name)) {
        options.remove(name);
      }
      options.put(name, value);
    }
    for (int t = 0; t < targets.size(); t++) {
      File target = new File(absolutePath(targets.get(t).getTextContent()));
      File tmpFile = new File(Utils.timestamp());
      BufferedWriter bw = null;
      BufferedReader br = null;
      try {
        Node separatorAttr = targets.get(t).getAttributes().getNamedItem("separator");
        String separator = (separatorAttr == null) ? globalSeparator : separatorAttr.getNodeValue();
        if (separator.length() != 1) {
          separator = globalSeparator;
        }
        bw = new BufferedWriter(new FileWriter(tmpFile));
        if (target.exists()) {
          br = new BufferedReader(new FileReader(target));
          for (String line; (line = br.readLine()) != null; ) {
            String[] parts = line.split(separator);
            if (parts.length < 2) {
              bw.write(line);
              bw.newLine();
              continue;
            }

            String optName = parts[0].trim();
            if (options.containsKey(optName)) {
              String optValue = options.get(optName);
              bw.write(optName + " " + separator + " " + optValue);
              bw.newLine();
              processedOptions.put(optName, optValue);
              options.remove(optName);
            } else if (processedOptions.containsKey(optName)) {
              bw.write(optName + " " + separator + " " + processedOptions.get(optName));
              bw.newLine();
            } else {
              bw.write(line);
              bw.newLine();
            }
          }
          br.close();
        }
        for (Map.Entry<String, String> entry : options.entrySet()) {
          bw.write(entry.getKey() + " " + separator + " " + entry.getValue());
          bw.newLine();
        }
        bw.close();
        FileUtils.copyFile(tmpFile, target);
        FileUtils.forceDelete(tmpFile);
      } catch (IOException ex) {
        Utils.onError(new Error.WriteTxtConfig(target.getPath()));
      }
    }
  }
Exemplo n.º 11
0
  /**
   * Adds additional entries to the extraparams hashmap by processing various rules defined in the
   * TDT definition files. Typically used for string processing functions, lookup in tables,
   * calculation of check digits etc.
   */
  private void processRules(Map<String, String> extraparams, Rule tdtrule) {
    String tdtfunction = tdtrule.getFunction();
    int openbracket = tdtfunction.indexOf("(");
    assert openbracket != -1;
    String params = tdtfunction.substring(openbracket + 1, tdtfunction.length() - 1);
    String rulename = tdtfunction.substring(0, openbracket);
    String[] parameter = params.split(",");
    String newfieldname = tdtrule.getNewFieldName();
    // System.out.println(tdtfunction + " " + parameter[0] + " " + extraparams.get(parameter[0]));
    /**
     * Stores in the hashmap extraparams the value obtained from a lookup in a specified XML table.
     *
     * <p>The first parameter is the given value already known. This is denoted as $1 in the
     * corresponding XPath expression
     *
     * <p>The second parameter is the string filename of the table which must be present in the
     * auxiliary subdirectory
     *
     * <p>The third parameter is the column in which the supplied input value should be sought
     *
     * <p>The fourth parameter is the column whose value should be read for the corresponding row,
     * in order to obtain the result of the lookup.
     *
     * <p>The rule in the definition file may contain an XPath expression and a URL where the table
     * may be obtained.
     */
    if (rulename.equals("TABLELOOKUP")) {
      // parameter[0] is given value
      // parameter[1] is table
      // parameter[2] is input column supplied
      // parameter[3] is output column required
      assert parameter.length == 4 : "incorrect number of parameters to tablelookup " + params;
      if (parameter[1].equals("tdt64bitcpi")) {
        String s = extraparams.get(parameter[0]);
        assert s != null : tdtfunction + " when " + parameter[0] + " is null";
        String t = gs1cpi.get(s);
        assert t != null : "gs1cpi[" + s + "] is null";
        assert newfieldname != null;
        extraparams.put(newfieldname, t);
        // extraparams.put(newfieldname, gs1cpi.get(extraparams.get(parameter[0])));
      } else { // JPB! the following is untested
        String tdtxpath = tdtrule.getTableXPath();
        String tdttableurl = tdtrule.getTableURL();
        String tdtxpathsub = tdtxpath.replaceAll("\\$1", extraparams.get(parameter[0]));
        extraparams.put(newfieldname, xpathlookup("ManagerTranslation.xml", tdtxpathsub));
      }
    }

    /**
     * Stores the length of the specified string under the new fieldname specified by the
     * corresponding rule of the definition file.
     */
    if (rulename.equals("LENGTH")) {
      assert extraparams.get(parameter[0]) != null
          : tdtfunction + " when " + parameter[0] + " is null";
      if (extraparams.get(parameter[0]) != null) {
        extraparams.put(newfieldname, Integer.toString(extraparams.get(parameter[0]).length()));
      }
    }

    /**
     * Stores a GS1 check digit in the extraparams hashmap, keyed under the new fieldname specified
     * by the corresponding rule of the definition file.
     */
    if (rulename.equals("GS1CHECKSUM")) {
      assert extraparams.get(parameter[0]) != null
          : tdtfunction + " when " + parameter[0] + " is null";
      if (extraparams.get(parameter[0]) != null) {
        extraparams.put(newfieldname, gs1checksum(extraparams.get(parameter[0])));
      }
    }

    /**
     * Obtains a substring of the string provided as the first parameter. If only a single second
     * parameter is specified, then this is considered as the start index and all characters from
     * the start index onwards are stored in the extraparams hashmap under the key named
     * 'newfieldname' in the corresponding rule of the definition file. If a second and third
     * parameter are specified, then the second parameter is the start index and the third is the
     * length of characters required. A substring consisting characters from the start index up to
     * the required length of characters is stored in the extraparams hashmap, keyed under the new
     * fieldname specified by the corresponding rule of the defintion file.
     */
    if (rulename.equals("SUBSTR")) {
      assert extraparams.get(parameter[0]) != null
          : tdtfunction + " when " + parameter[0] + " is null";
      if (parameter.length == 2) {
        if (extraparams.get(parameter[0]) != null) {
          int start = getIntValue(parameter[1], extraparams);
          if (start >= 0) {
            extraparams.put(newfieldname, extraparams.get(parameter[0]).substring(start));
          }
        }
      }
      if (parameter.length
          == 3) { // need to check that this variation is correct - c.f. Perl substr
        assert extraparams.get(parameter[0]) != null
            : tdtfunction + " when " + parameter[0] + " is null";
        if (extraparams.get(parameter[0]) != null) {
          int start = getIntValue(parameter[1], extraparams);
          int end = getIntValue(parameter[2], extraparams);
          if ((start >= 0) && (end >= 0)) {
            extraparams.put(
                newfieldname, extraparams.get(parameter[0]).substring(start, start + end));
          }
        }
      }
    }

    /**
     * Concatenates specified string parameters together. Literal values must be enclosed within
     * single or double quotes or consist of unquoted digits. Other unquoted strings are considered
     * as fieldnames and the corresponding value from the extraparams hashmap are inserted. The
     * result of the concatenation (and substitution) of the strings is stored as a new entry in the
     * extraparams hashmap, keyed under the new fieldname specified by the rule.
     */
    if (rulename.equals("CONCAT")) {
      StringBuilder buffer = new StringBuilder();
      for (int p1 = 0; p1 < parameter.length; p1++) {
        Matcher matcher = Pattern.compile("\"(.*?)\"|'(.*?)'|[0-9]").matcher(parameter[p1]);
        if (matcher.matches()) {
          buffer.append(parameter[p1]);
        } else {
          assert extraparams.get(parameter[p1]) != null
              : tdtfunction + " when " + parameter[p1] + " is null";
          if (extraparams.get(parameter[p1]) != null) {
            buffer.append(extraparams.get(parameter[p1]));
          }
        }
      }
      extraparams.put(newfieldname, buffer.toString());
    }
  }
Exemplo n.º 12
0
  /** convert from a particular scheme / level */
  private String convertLevel(
      Scheme tdtscheme,
      Level tdtlevel,
      String input,
      Map<String, String> inputParameters,
      LevelTypeList outboundlevel) {

    String outboundstring;
    Map<String, String> extraparams =
        //	    new NoisyMap
        (new HashMap<String, String>(inputParameters));

    // get the scheme's option key, which is the name of a
    // parameter whose value is matched to the option key of the
    // level.

    String optionkey = tdtscheme.getOptionKey();
    String optionValue = extraparams.get(optionkey);
    // the name of a parameter which allows the appropriate option
    // to be selected

    // now consider the various options within the scheme and
    // level for each option element inside the level, check
    // whether the pattern attribute matches as a regular
    // expression

    String matchingOptionKey = null;
    Option matchingOption = null;
    Matcher prefixMatcher = null;
    for (Enumeration e = tdtlevel.enumerateOption(); e.hasMoreElements(); ) {
      Option opt = (Option) e.nextElement();
      if (optionValue == null || optionValue.equals(opt.getOptionKey())) {
        // possible match

        Matcher matcher = Pattern.compile(opt.getPattern()).matcher(input);
        if (matcher.matches()) {
          if (prefixMatcher != null) throw new TDTException("Multiple patterns matched");
          prefixMatcher = matcher;
          matchingOptionKey = opt.getOptionKey();
          matchingOption = opt;
        }
      }
    }
    if (prefixMatcher == null) throw new TDTException("No patterns matched");

    optionValue = matchingOptionKey;

    for (Enumeration e = matchingOption.enumerateField(); e.hasMoreElements(); ) {
      Field field = (Field) e.nextElement();
      int seq = field.getSeq();

      String strfieldname = field.getName();
      int fieldlength = field.getLength();
      String strfieldvalue = prefixMatcher.group(seq);
      // System.out.println("   processing field " + strfieldname + " = '" + strfieldvalue + "'");

      if (field.getCompaction() == null) {
        // if compaction is null, treat field as an integer

        if (field.getCharacterSet() != null) { // if the character set is specified
          Matcher charsetmatcher =
              Pattern.compile("^" + field.getCharacterSet() + "$").matcher(strfieldvalue);
          if (!charsetmatcher.matches()) {
            throw new TDTException(
                "field "
                    + strfieldname
                    + " ("
                    + strfieldvalue
                    + ") does not conform to the allowed character set ("
                    + field.getCharacterSet()
                    + ") ");
          }
        }

        BigInteger bigvalue = null;

        if (tdtlevel.getType() == LevelTypeList.BINARY) { // if the input was BINARY
          bigvalue = new BigInteger(strfieldvalue, 2);
          extraparams.put(strfieldname, bigvalue.toString());
        } else {
          if (field.getDecimalMinimum() != null || field.getDecimalMaximum() != null)
            bigvalue = new BigInteger(strfieldvalue);
          extraparams.put(strfieldname, strfieldvalue);
        }

        if (field.getDecimalMinimum() != null) { // if the decimal minimum is specified
          BigInteger bigmin = new BigInteger(field.getDecimalMinimum());

          if (bigvalue.compareTo(bigmin)
              == -1) { // throw an exception if the field value is less than the decimal minimum
            throw new TDTException(
                "field "
                    + strfieldname
                    + " ("
                    + bigvalue
                    + ") is less than DecimalMinimum ("
                    + field.getDecimalMinimum()
                    + ") allowed");
          }
        }

        if (field.getDecimalMaximum() != null) { // if the decimal maximum is specified
          BigInteger bigmax = new BigInteger(field.getDecimalMaximum());

          if (bigvalue.compareTo(bigmax)
              == 1) { // throw an excpetion if the field value is greater than the decimal maximum
            throw new TDTException(
                "field "
                    + strfieldname
                    + " ("
                    + bigvalue
                    + ") is greater than DecimalMaximum ("
                    + field.getDecimalMaximum()
                    + ") allowed");
          }
        }

        // after extracting the field, it may be necessary to pad it.

        padField(extraparams, field);

      } else {
        // compaction is specified - interpret binary as a string value using a truncated byte per
        // character

        CompactionMethodList compaction = field.getCompaction();
        PadDirectionList padDir = field.getPadDir();
        String padchar = field.getPadChar();
        String s;
        if (compaction == CompactionMethodList.VALUE_5)
          // "5-bit"
          s = bin2uppercasefive(strfieldvalue);
        else if (compaction == CompactionMethodList.VALUE_4)
          // 6-bit
          s = bin2alphanumsix(strfieldvalue);
        else if (compaction == CompactionMethodList.VALUE_3)
          // 7-bit
          s = bin2asciiseven(strfieldvalue);
        else if (compaction == CompactionMethodList.VALUE_2)
          // 8-bit
          s = bin2bytestring(strfieldvalue);
        else throw new Error("unsupported compaction method " + compaction);
        extraparams.put(strfieldname, stripPadChar(s, padDir, padchar));
      }
    } // for each field;

    /**
     * the EXTRACT rules are performed after parsing the input, in order to determine additional
     * fields that are to be derived from the fields obtained by the pattern match process
     */
    int seq = 0;
    for (Enumeration e = tdtlevel.enumerateRule(); e.hasMoreElements(); ) {
      Rule tdtrule = (Rule) e.nextElement();
      if (tdtrule.getType() == ModeList.EXTRACT) {
        assert seq < tdtrule.getSeq() : "Rule out of sequence order";
        seq = tdtrule.getSeq();
        processRules(extraparams, tdtrule);
      }
    }

    /**
     * Now we need to consider the corresponding output level and output option. The scheme must
     * remain the same, as must the value of optionkey (to select the corresponding option element
     * nested within the required outbound level)
     */
    Level tdtoutlevel = findLevel(tdtscheme, outboundlevel);
    Option tdtoutoption = findOption(tdtoutlevel, optionValue);

    /**
     * the FORMAT rules are performed before formatting the output, in order to determine additional
     * fields that are required for preparation of the outbound format
     */
    seq = 0;
    for (Enumeration e = tdtoutlevel.enumerateRule(); e.hasMoreElements(); ) {
      Rule tdtrule = (Rule) e.nextElement();
      if (tdtrule.getType() == ModeList.FORMAT) {
        assert seq < tdtrule.getSeq() : "Rule out of sequence order";
        seq = tdtrule.getSeq();
        processRules(extraparams, tdtrule);
      }
    }

    /**
     * Now we need to ensure that all fields required for the outbound grammar are suitably padded
     * etc. processPadding takes care of firstly padding the non-binary fields if padChar and
     * padDir, length are specified then (if necessary) converting to binary and padding the binary
     * representation to the left with zeros if the bit string is has fewer bits than the bitLength
     * attribute specifies. N.B. TDTv1.1 will be more specific about bit-level padding rather than
     * assuming that it is always to the left with the zero bit.
     */

    // System.out.println(" prior to processPadding, " + extraparams);
    for (Enumeration e = tdtoutoption.enumerateField(); e.hasMoreElements(); ) {
      Field field = (Field) e.nextElement();
      // processPadding(extraparams, field, outboundlevel, tdtoutoption);

      padField(extraparams, field);
      if (outboundlevel == LevelTypeList.BINARY) binaryPadding(extraparams, field);
    }

    /**
     * Construct the output from the specified grammar (in ABNF format) together with the field
     * values stored in inputparams
     */
    outboundstring = buildGrammar(tdtoutoption.getGrammar(), extraparams);

    // System.out.println("final extraparams = " + extraparams);
    // System.out.println("returned " + outboundstring);
    return outboundstring;
  }