/** DoubleBuffer version of: {@link #glTexSubImage3D TexSubImage3D} */
public static void glTexSubImage3D(
int target,
int level,
int xoffset,
int yoffset,
int zoffset,
int width,
int height,
int depth,
int format,
int type,
DoubleBuffer pixels) {
if (LWJGLUtil.CHECKS) GLChecks.ensureBufferObject(GL21.GL_PIXEL_UNPACK_BUFFER_BINDING, false);
nglTexSubImage3D(
target,
level,
xoffset,
yoffset,
zoffset,
width,
height,
depth,
format,
type,
memAddress(pixels));
}
/**
* <a href="http://www.opengl.org/sdk/docs/man/xhtml/glDrawRangeElements.xml">OpenGL SDK
* Reference</a>
*
* <p>A restricted form of {@link GL11#glDrawElements DrawElements}. mode, start, end, and count
* match the corresponding arguments to glDrawElements, with the additional constraint that all
* values in the arrays count must lie between start and end, inclusive.
*
* <p>Implementations denote recommended maximum amounts of vertex and index data, which may be
* queried by calling glGet with argument {@link #GL_MAX_ELEMENTS_VERTICES MAX_ELEMENTS_VERTICES}
* and {@link #GL_MAX_ELEMENTS_INDICES MAX_ELEMENTS_INDICES}. If end - start + 1 is greater than
* the value of GL_MAX_ELEMENTS_VERTICES, or if count is greater than the value of
* GL_MAX_ELEMENTS_INDICES, then the call may operate at reduced performance. There is no
* requirement that all vertices in the range start end be referenced. However, the implementation
* may partially process unused vertices, reducing performance from what could be achieved with an
* optimal index set.
*
* <p>When glDrawRangeElements is called, it uses count sequential elements from an enabled array,
* starting at start to construct a sequence of geometric primitives. mode specifies what kind of
* primitives are constructed, and how the array elements construct these primitives. If more than
* one array is enabled, each is used.
*
* <p>Vertex attributes that are modified by glDrawRangeElements have an unspecified value after
* glDrawRangeElements returns. Attributes that aren't modified maintain their previous values.
*
* <h3>Errors</h3>
*
* It is an error for indices to lie outside the range start end, but implementations may not
* check for this situation. Such indices cause implementation-dependent behavior.
*
* <ul>
* <li>GL_INVALID_ENUM is generated if mode is not an accepted value.
* <li>GL_INVALID_VALUE is generated if count is negative.
* <li>GL_INVALID_VALUE is generated if end < start.
* <li>GL_INVALID_OPERATION is generated if a geometry shader is active and mode is incompatible
* with the input primitive type of the geometry shader in the currently installed program
* object.
* <li>GL_INVALID_OPERATION is generated if a non-zero buffer object name is bound to an enabled
* array or the element array and the buffer object's data store is currently mapped.
* </ul>
*
* @param mode the kind of primitives to render. One of:
* <p>{@link GL11#GL_POINTS POINTS}, {@link GL11#GL_LINE_STRIP LINE_STRIP}, {@link
* GL11#GL_LINE_LOOP LINE_LOOP}, {@link GL11#GL_LINES LINES}, {@link GL11#GL_POLYGON POLYGON},
* {@link GL11#GL_TRIANGLE_STRIP TRIANGLE_STRIP}, {@link GL11#GL_TRIANGLE_FAN TRIANGLE_FAN},
* {@link GL11#GL_TRIANGLES TRIANGLES}, {@link GL11#GL_QUAD_STRIP QUAD_STRIP}, {@link
* GL11#GL_QUADS QUADS}, {@link GL32#GL_LINES_ADJACENCY LINES_ADJACENCY}, {@link
* GL32#GL_LINE_STRIP_ADJACENCY LINE_STRIP_ADJACENCY}, {@link GL32#GL_TRIANGLES_ADJACENCY
* TRIANGLES_ADJACENCY}, {@link GL32#GL_TRIANGLE_STRIP_ADJACENCY TRIANGLE_STRIP_ADJACENCY},
* {@link GL40#GL_PATCHES PATCHES}
* @param start the minimum array index contained in {@code indices}
* @param end the maximum array index contained in {@code indices}
* @param count the number of elements to be rendered
* @param type the type of the values in {@code indices}. One of:
* <p>{@link GL11#GL_UNSIGNED_BYTE UNSIGNED_BYTE}, {@link GL11#GL_UNSIGNED_SHORT
* UNSIGNED_SHORT}, {@link GL11#GL_UNSIGNED_INT UNSIGNED_INT}
* @param indices a pointer to the location where the indices are stored
*/
public static void glDrawRangeElements(
int mode, int start, int end, int count, int type, ByteBuffer indices) {
if (LWJGLUtil.CHECKS) {
checkBuffer(indices, count / GLChecks.typeToBytes(type));
GLChecks.ensureBufferObject(GL15.GL_ELEMENT_ARRAY_BUFFER_BINDING, false);
}
nglDrawRangeElements(mode, start, end, count, type, memAddress(indices));
}
/** int[] version of: {@link #glVertexAttribIPointerEXT VertexAttribIPointerEXT} */
public static void glVertexAttribIPointerEXT(
int index, int size, int type, int stride, int[] pointer) {
long __functionAddress = GL.getCapabilities().glVertexAttribIPointerEXT;
if (CHECKS) {
checkFunctionAddress(__functionAddress);
GLChecks.ensureBufferObject(GL15.GL_ARRAY_BUFFER_BINDING, false);
}
callPV(__functionAddress, index, size, type, stride, pointer);
}
/** Alternative version of: {@link #glDrawRangeElements DrawRangeElements} */
public static void glDrawRangeElements(
int mode, int start, int end, int type, ByteBuffer indices) {
if (LWJGLUtil.CHECKS) GLChecks.ensureBufferObject(GL15.GL_ELEMENT_ARRAY_BUFFER_BINDING, true);
nglDrawRangeElements(
mode,
start,
end,
indices.remaining() * GLChecks.typeToBytes(type),
type,
memAddress(indices));
}
/** Buffer object offset version of: {@link #glTexImage3D TexImage3D} */
public static void glTexImage3D(
int target,
int level,
int internalformat,
int width,
int height,
int depth,
int border,
int format,
int type,
long pixelsOffset) {
if (LWJGLUtil.CHECKS) GLChecks.ensureBufferObject(GL21.GL_PIXEL_UNPACK_BUFFER_BINDING, true);
nglTexImage3D(
target, level, internalformat, width, height, depth, border, format, type, pixelsOffset);
}
/** DoubleBuffer version of: {@link #glTexImage3D TexImage3D} */
public static void glTexImage3D(
int target,
int level,
int internalformat,
int width,
int height,
int depth,
int border,
int format,
int type,
DoubleBuffer pixels) {
if (LWJGLUtil.CHECKS) GLChecks.ensureBufferObject(GL21.GL_PIXEL_UNPACK_BUFFER_BINDING, false);
nglTexImage3D(
target,
level,
internalformat,
width,
height,
depth,
border,
format,
type,
memAddressSafe(pixels));
}
/** GL_UNSIGNED_INT version of: {@link #glDrawRangeElements DrawRangeElements} */
public static void glDrawRangeElements(int mode, int start, int end, IntBuffer indices) {
if (LWJGLUtil.CHECKS) GLChecks.ensureBufferObject(GL15.GL_ELEMENT_ARRAY_BUFFER_BINDING, false);
nglDrawRangeElements(
mode, start, end, indices.remaining(), GL11.GL_UNSIGNED_INT, memAddress(indices));
}
/** Buffer object offset version of: {@link #glDrawRangeElements DrawRangeElements} */
public static void glDrawRangeElements(
int mode, int start, int end, int count, int type, long indicesOffset) {
if (LWJGLUtil.CHECKS) GLChecks.ensureBufferObject(GL15.GL_ELEMENT_ARRAY_BUFFER_BINDING, true);
nglDrawRangeElements(mode, start, end, count, type, indicesOffset);
}
/** IntBuffer version of: {@link #glVertexAttribIPointerEXT VertexAttribIPointerEXT} */
public static void glVertexAttribIPointerEXT(
int index, int size, int type, int stride, IntBuffer pointer) {
if (CHECKS) GLChecks.ensureBufferObject(GL15.GL_ARRAY_BUFFER_BINDING, false);
nglVertexAttribIPointerEXT(index, size, type, stride, memAddress(pointer));
}
/**
* Specifies the location and organization of a pure integer vertex attribute array.
*
* @param index the index of the pure integer generic vertex attribute to be modified
* @param size the number of values per vertex that are stored in the array. The initial value is
* 4. One of:<br>
* <table><tr><td>1</td><td>2</td><td>3</td><td>4</td><td>{@link GL12#GL_BGRA BGRA}</td></tr>
* </table>
*
* @param type the data type of each component in the array. One of:<br>
* <table>
* <tr><td>{@link GL11#GL_BYTE BYTE}</td><td>{@link GL11#GL_UNSIGNED_BYTE UNSIGNED_BYTE}</td><td>{@link GL11#GL_SHORT SHORT}</td><td>{@link GL11#GL_UNSIGNED_SHORT UNSIGNED_SHORT}</td><td>{@link GL11#GL_INT INT}</td><td>{@link GL11#GL_UNSIGNED_INT UNSIGNED_INT}</td></tr>
* </table>
*
* @param stride the byte offset between consecutive generic vertex attributes. If stride is 0,
* the generic vertex attributes are understood to be tightly packed in the array. The initial
* value is 0.
* @param pointer the vertex attribute data or the offset of the first component of the first
* generic vertex attribute in the array in the data store of the buffer currently bound to
* the {@link GL15#GL_ARRAY_BUFFER ARRAY_BUFFER} target. The initial value is 0.
*/
public static void glVertexAttribIPointerEXT(
int index, int size, int type, int stride, long pointer) {
if (CHECKS) GLChecks.ensureBufferObject(GL15.GL_ARRAY_BUFFER_BINDING, true);
nglVertexAttribIPointerEXT(index, size, type, stride, pointer);
}