protected String[] getSketchParams(boolean presenting) {
ArrayList<String> params = new ArrayList<String>();
// It's dangerous to add your own main() to your code,
// but if you've done it, we'll respect your right to hang yourself.
// http://processing.org/bugs/bugzilla/1446.html
if (build.getFoundMain()) {
params.add(build.getSketchClassName());
} else {
params.add("processing.core.PApplet");
// get the stored device index (starts at 0)
int runDisplay = Preferences.getInteger("run.display");
// If there was a saved location (this guy has been run more than once)
// then the location will be set to the last position of the sketch window.
// This will be passed to the PApplet runner using something like
// --location=30,20
// Otherwise, the editor location will be passed, and the applet will
// figure out where to place itself based on the editor location.
// --editor-location=150,20
if (editor != null) { // if running processing-cmd, don't do placement
GraphicsDevice editorDevice = editor.getGraphicsConfiguration().getDevice();
GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
GraphicsDevice[] devices = ge.getScreenDevices();
// Make sure the display set in Preferences actually exists
GraphicsDevice runDevice = editorDevice;
if (runDisplay >= 0 && runDisplay < devices.length) {
runDevice = devices[runDisplay];
} else {
runDevice = editorDevice;
for (int i = 0; i < devices.length; i++) {
if (devices[i] == runDevice) {
runDisplay = i;
break;
// Don't set the pref, might be a temporary thing. Users can
// open/close Preferences to reset the device themselves.
// Preferences.setInteger("run.display", runDisplay);
}
}
}
Point windowLocation = editor.getSketchLocation();
// if (windowLocation != null) {
// // could check to make sure the sketch location is on the device
// // that's specified in Preferences, but that's going to be annoying
// // if you move a sketch to another window, then it keeps jumping
// // back to the specified window.
//// Rectangle screenRect =
//// runDevice.getDefaultConfiguration().getBounds();
// }
if (windowLocation == null) {
if (editorDevice == runDevice) {
// If sketches are to be shown on the same display as the editor,
// provide the editor location so the sketch's main() can place it.
Point editorLocation = editor.getLocation();
params.add(
PApplet.ARGS_EDITOR_LOCATION + "=" + editorLocation.x + "," + editorLocation.y);
} else {
// The sketch's main() will set a location centered on the new
// display. It has to happen in main() because the width/height
// of the sketch are not known here.
// Set a location centered on the other display
// Rectangle screenRect =
// runDevice.getDefaultConfiguration().getBounds();
// int runX =
// params.add(PApplet.ARGS_LOCATION + "=" + runX + "," + runY);
}
} else {
params.add(PApplet.ARGS_LOCATION + "=" + windowLocation.x + "," + windowLocation.y);
}
params.add(PApplet.ARGS_EXTERNAL);
}
params.add(PApplet.ARGS_DISPLAY + "=" + runDisplay);
if (presenting) {
params.add(PApplet.ARGS_FULL_SCREEN);
// if (Preferences.getBoolean("run.present.exclusive")) {
// params.add(PApplet.ARGS_EXCLUSIVE);
// }
params.add(PApplet.ARGS_STOP_COLOR + "=" + Preferences.get("run.present.stop.color"));
params.add(PApplet.ARGS_BGCOLOR + "=" + Preferences.get("run.present.bgcolor"));
}
params.add(build.getSketchClassName());
params.add(PApplet.ARGS_SKETCH_FOLDER + "=" + build.getSketchPath());
// Adding sketch path in the end coz it's likely to
// contain spaces and things go wrong on UNIX systems.
}
// String outgoing[] = new String[params.size()];
// params.toArray(outgoing);
// return outgoing;
return params.toArray(new String[0]);
}
protected String[] getSketchParams(boolean presenting) {
ArrayList<String> params = new ArrayList<String>();
// It's dangerous to add your own main() to your code,
// but if you've done it, we'll respect your right to hang yourself.
// http://processing.org/bugs/bugzilla/1446.html
if (build.getFoundMain()) {
params.add(build.getSketchClassName());
} else {
params.add("processing.core.PApplet");
// get the stored device index (starts at 1)
int runDisplay = Preferences.getInteger("run.display");
// If there was a saved location (this guy has been run more than once)
// then the location will be set to the last position of the sketch window.
// This will be passed to the PApplet runner using something like
// --location=30,20
// Otherwise, the editor location will be passed, and the applet will
// figure out where to place itself based on the editor location.
// --editor-location=150,20
if (editor != null) { // if running processing-cmd, don't do placement
GraphicsDevice editorDevice = editor.getGraphicsConfiguration().getDevice();
GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
GraphicsDevice[] devices = ge.getScreenDevices();
// Make sure the display set in Preferences actually exists
GraphicsDevice runDevice = editorDevice;
if (runDisplay > 0 && runDisplay <= devices.length) {
runDevice = devices[runDisplay - 1];
} else {
// If a bad display is selected, use the same display as the editor
if (runDisplay > 0) { // don't complain about -1 or 0
System.err.println("Display " + runDisplay + " not available.");
}
runDevice = editorDevice;
for (int i = 0; i < devices.length; i++) {
if (devices[i] == runDevice) {
// Wasn't setting the pref to avoid screwing things up with
// something temporary. But not setting it makes debugging one's
// setup just too damn weird, so changing that behavior.
runDisplay = i + 1;
System.err.println(
"Setting 'Run Sketches on Display' preference to display " + runDisplay);
Preferences.setInteger("run.display", runDisplay);
break;
}
}
}
Point windowLocation = editor.getSketchLocation();
// if (windowLocation != null) {
// // could check to make sure the sketch location is on the device
// // that's specified in Preferences, but that's going to be annoying
// // if you move a sketch to another window, then it keeps jumping
// // back to the specified window.
//// Rectangle screenRect =
//// runDevice.getDefaultConfiguration().getBounds();
// }
if (windowLocation == null) {
if (editorDevice == runDevice) {
// If sketches are to be shown on the same display as the editor,
// provide the editor location so the sketch's main() can place it.
Point editorLocation = editor.getLocation();
params.add(
PApplet.ARGS_EDITOR_LOCATION + "=" + editorLocation.x + "," + editorLocation.y);
} else {
// The sketch's main() will set a location centered on the new
// display. It has to happen in main() because the width/height
// of the sketch are not known here.
// Set a location centered on the other display
// Rectangle screenRect =
// runDevice.getDefaultConfiguration().getBounds();
// int runX =
// params.add(PApplet.ARGS_LOCATION + "=" + runX + "," + runY);
}
} else {
params.add(PApplet.ARGS_LOCATION + "=" + windowLocation.x + "," + windowLocation.y);
}
params.add(PApplet.ARGS_EXTERNAL);
}
params.add(PApplet.ARGS_DISPLAY + "=" + runDisplay);
if (presenting) {
params.add(PApplet.ARGS_PRESENT);
// if (Preferences.getBoolean("run.present.exclusive")) {
// params.add(PApplet.ARGS_EXCLUSIVE);
// }
params.add(PApplet.ARGS_STOP_COLOR + "=" + Preferences.get("run.present.stop.color"));
params.add(PApplet.ARGS_WINDOW_COLOR + "=" + Preferences.get("run.present.bgcolor"));
}
// There was a PDE X hack that put this after the class name, but it was
// removed for 3.0a6 because it would break the args passed to sketches.
params.add(PApplet.ARGS_SKETCH_FOLDER + "=" + build.getSketchPath());
params.add(build.getSketchClassName());
}
// String outgoing[] = new String[params.size()];
// params.toArray(outgoing);
// return outgoing;
return params.toArray(new String[0]);
}