/** Método para llenar los combos con Voltages. */
 public void fill_combos_voltages() {
   voltagesFound = ServiceVoltage.find_voltages();
   if (voltagesFound != null) {
     viewMainFeeder.getCmbVoltage().removeAllItems();
     for (Voltage voltage : voltagesFound) {
       if (((Phase) viewMainFeeder.getCmbPhases().getSelectedItem())
               .getName()
               .equalsIgnoreCase(TypePhases.SINGLE_PHASE_TWO_THREAD.getPhase())
           && voltage.getVoltage() < 200) {
         viewMainFeeder.getCmbVoltage().addItem(voltage);
       } else if ((((Phase) viewMainFeeder.getCmbPhases().getSelectedItem())
                   .getName()
                   .equalsIgnoreCase(TypePhases.SINGLE_PHASE_THREE_THREAD.getPhase())
               || ((Phase) viewMainFeeder.getCmbPhases().getSelectedItem())
                   .getName()
                   .equalsIgnoreCase(TypePhases.PHASE_FOUR_THREAD.getPhase()))
           && voltage.getVoltage() >= 200) {
         viewMainFeeder.getCmbVoltage().addItem(voltage);
       }
     }
     viewMainFeeder.getCmbVoltage().setSelectedIndex(0);
   } else {
     MessagesStructure.Warning(
         MessagesStructure.format(
             200, messages.getProperty(Messages.VOLTAGES_NO_FOUND), MessagesStructure.justify));
     viewMainFeeder.dispose();
   }
 } // Fin del método
  /** Método para llenar los combos con Fases. */
  public void fill_combos_phases() {
    phasesFound = ServicePhase.find_phases();
    if (phasesFound != null) {
      for (Phase phase : phasesFound) {
        if (phase.getName().equalsIgnoreCase(TypePhases.PHASE_FOUR_THREAD.getPhase())) {

          viewMainFeeder.getCmbPhases().addItem(phase);
        }
      }
      viewMainFeeder.getCmbPhases().setSelectedIndex(0);
    } else {
      MessagesStructure.Warning(
          MessagesStructure.format(
              200, messages.getProperty(Messages.PHASES_NO_FOUND), MessagesStructure.justify));
      viewMainFeeder.dispose();
    }
  } // Fin del método
 @Override
 public void actionPerformed(ActionEvent e) {
   if (e.getSource().equals(viewMainFeeder.getBtnAdd())) {
     loadRegister();
   } else if (e.getSource().equals(viewMainFeeder.getBtnClose())) {
     viewMainFeeder.dispose();
   } else if (e.getSource().equals(viewMainFeeder.getBtnCalculateCurrentCapacity())) {
     this.calculate_conductor();
   } else if (e.getSource().equals(viewMainFeeder.getBtnCalculateBreakdown())) {
     this.calculate_breakDownVoltage();
   } else if (e.getSource().equals(viewMainFeeder.getCmbPhases())) {
     this.fill_combos_voltages();
   }
 }
  // Método para probar los conductores por caída de voltaje.
  private void calculate_breakDownVoltage() {
    if (caliberPhaseFound == null || caliberNeutralFound == null || calibersHearthFound == null) {
      MessagesStructure.Warning(
          MessagesStructure.format(
              200,
              messages.getProperty(Messages.AREA_CAPACITY_INTENSITY_NO_FOUND),
              MessagesStructure.justify));
    } else {
      if (MethodsForCalculationsGlobal.validate_caliber(
              (Caliber) viewMainFeeder.getCmbCaliber().getSelectedItem())
          && MethodsForCalculationsGlobal.validate_caliber(
              (Caliber) viewMainFeeder.getCmbCalibersNeutral().getSelectedItem())) {
        resistance = calculate_resistance(TypeOfBranchCircuitInArea.ILUMINARIA);
        reactance = calculate_reactance(TypeOfBranchCircuitInArea.ILUMINARIA);
        if (resistance != null) {
          breakdownVoltage =
              MethodsForCalculationsGlobal.breakdownVoltage(
                  viewMainFeeder.getPotency_total(),
                  Double.valueOf(viewMainFeeder.getJspLength().getValue().toString()),
                  ((Voltage) viewMainFeeder.getCmbVoltage().getSelectedItem()).getVoltage(),
                  reactance.getValue().getValour(),
                  Double.valueOf(viewMainFeeder.getJspPowerFactor().getValue().toString()),
                  resistance.getValue().getValour(),
                  Double.valueOf(viewMainFeeder.getJspAngle().getValue().toString()));
          viewMainFeeder.getLblBreakdownVoltage().setText(String.valueOf(breakdownVoltage) + " %");
          caliberSelected = (Caliber) viewMainFeeder.getCmbCaliber().getSelectedItem();

          intensityDesignFound =
              MethodsForCalculationsIluminariaPowerPoint.calculate_instensity_design(
                  new Calibers(
                      0,
                      (Material) viewMainFeeder.getCmbMaterial().getSelectedItem(),
                      (Temperature) viewMainFeeder.getCmbTemperature().getSelectedItem(),
                      null,
                      caliberSelected));

          breakerPhasePersistFound =
              MethodsForCalculationsGlobal.find_breaker_main_feeder(
                  conductorForPhase * intensityDesignFound.getIntensity(),
                  new Intensity(
                      0,
                      null,
                      MethodsForCalculationsGlobal.intensity(
                          viewMainFeeder.getPotency_total(),
                          ((Voltage) viewMainFeeder.getCmbVoltage().getSelectedItem()).getVoltage(),
                          Double.valueOf(viewMainFeeder.getJspPowerFactor().getValue().toString()),
                          2)));

          resistance = calculate_resistance(TypeOfBranchCircuitInArea.NEUTRAL);
          reactance = calculate_reactance(TypeOfBranchCircuitInArea.NEUTRAL);
          if (resistance != null) {
            breakdownVoltage =
                MethodsForCalculationsGlobal.breakdownVoltage(
                    viewMainFeeder.getNeutral_total(),
                    Double.valueOf(viewMainFeeder.getJspLength().getValue().toString()),
                    ((Voltage) viewMainFeeder.getCmbVoltage().getSelectedItem()).getVoltage(),
                    reactance.getValue().getValour(),
                    Double.valueOf(viewMainFeeder.getJspPowerFactor().getValue().toString()),
                    resistance.getValue().getValour(),
                    Double.valueOf(viewMainFeeder.getJspAngle().getValue().toString()));
            viewMainFeeder
                .getLblBreakdownVoltageNeutral()
                .setText(String.valueOf(breakdownVoltage) + " %");
            caliberSelectedNeutral =
                (Caliber) viewMainFeeder.getCmbCalibersNeutral().getSelectedItem();
            caliberPhase = viewMainFeeder.getLblCaliberPhase().getText();
            caliberPhase =
                caliberPhase.replace(
                    "#" + caliberPhaseFound.getCaliber().getName(),
                    "#" + caliberSelected.getName());
            caliberPhase =
                caliberPhase.replace(
                    "3x" + breakerPhaseFound.getCapacity(),
                    "3x" + breakerPhasePersistFound.getCapacity());
            caliberNeutral = viewMainFeeder.getLblCaliberNeutral().getText();
            caliberNeutral =
                caliberNeutral.replace(
                    "#" + caliberNeutralFound.getCaliber().getName(),
                    "#" + caliberSelectedNeutral.getName());
            caliberHearth = viewMainFeeder.getLblCaliberEarth().getText();

            caliberPipeline =
                MethodsForCalculationsGlobal.calculate_pipeline(
                    caliberSelected,
                    null,
                    null,
                    (Phase) viewMainFeeder.getCmbPhases().getSelectedItem(),
                    viewMainFeeder.getCmbPipeline().getSelectedItem().toString());

            caliberPipelineNeutral =
                MethodsForCalculationsGlobal.calculate_pipeline(
                    caliberSelectedNeutral,
                    null,
                    null,
                    new Phase(0, TypePhases.SINGLE_PHASE_TWO_THREAD.getPhase()),
                    viewMainFeeder.getCmbPipeline().getSelectedItem().toString());
          }
        }
      }
    }
  } // Fin del método.
  /** Método para calcular el conductor. */
  private void calculate_conductor() {
    if (!viewMainFeeder.getrBtnAir().isSelected() && !viewMainFeeder.getrBtnGround().isSelected()) {
      MessagesStructure.Warning(
          MessagesStructure.format(
              200, messages.getProperty(Messages.RUSH_NO_FOUND), MessagesStructure.justify));
      viewMainFeeder.getrBtnGround().requestFocus();
    } else {
      caliberPhaseFound =
          MethodsForCalculationsGlobal.calculateCaliberForMainFeeder(
              viewMainFeeder.getPotency_total(),
              (Voltage) viewMainFeeder.getCmbVoltage().getSelectedItem(),
              (Material) viewMainFeeder.getCmbMaterial().getSelectedItem(),
              (Temperature) viewMainFeeder.getCmbTemperature().getSelectedItem(),
              Double.valueOf(viewMainFeeder.getJspPowerFactor().getValue().toString()),
              2);

      caliberNeutralFound =
          MethodsForCalculationsGlobal.calculateCaliberForMainFeeder(
              viewMainFeeder.getNeutral_total(),
              (Voltage) viewMainFeeder.getCmbVoltage().getSelectedItem(),
              (Material) viewMainFeeder.getCmbMaterial().getSelectedItem(),
              (Temperature) viewMainFeeder.getCmbTemperature().getSelectedItem(),
              Double.valueOf(viewMainFeeder.getJspPowerFactor().getValue().toString()),
              2);

      conductorForPhase =
          MethodsForCalculationsGlobal.calculateNumberConductorForPhase(
              MethodsForCalculationsGlobal.intensity(
                  viewMainFeeder.getPotency_total(),
                  ((Voltage) viewMainFeeder.getCmbVoltage().getSelectedItem()).getVoltage(),
                  Double.valueOf(viewMainFeeder.getJspPowerFactor().getValue().toString()),
                  2),
              475);

      conductorForNeutral =
          MethodsForCalculationsGlobal.calculateNumberConductorForPhase(
              MethodsForCalculationsGlobal.intensity(
                  viewMainFeeder.getNeutral_total(),
                  ((Voltage) viewMainFeeder.getCmbVoltage().getSelectedItem()).getVoltage(),
                  Double.valueOf(viewMainFeeder.getJspPowerFactor().getValue().toString()),
                  2),
              475);

      caliberPipeline =
          MethodsForCalculationsGlobal.calculate_pipeline(
              caliberPhaseFound.getCaliber(),
              null,
              null,
              (Phase) viewMainFeeder.getCmbPhases().getSelectedItem(),
              viewMainFeeder.getCmbPipeline().getSelectedItem().toString());

      caliberPipelineNeutral =
          MethodsForCalculationsGlobal.calculate_pipeline(
              caliberNeutralFound.getCaliber(),
              null,
              null,
              new Phase(0, TypePhases.SINGLE_PHASE_TWO_THREAD.getPhase()),
              viewMainFeeder.getCmbPipeline().getSelectedItem().toString());

      intensityDesignFound =
          MethodsForCalculationsIluminariaPowerPoint.calculate_instensity_design(
              new Calibers(
                  0,
                  (Material) viewMainFeeder.getCmbMaterial().getSelectedItem(),
                  (Temperature) viewMainFeeder.getCmbTemperature().getSelectedItem(),
                  null,
                  caliberPhaseFound.getCaliber()));

      breakerPhaseFound =
          MethodsForCalculationsGlobal.find_breaker_main_feeder(
              conductorForPhase * intensityDesignFound.getIntensity(),
              new Intensity(
                  0,
                  null,
                  MethodsForCalculationsGlobal.intensity(
                      viewMainFeeder.getPotency_total(),
                      ((Voltage) viewMainFeeder.getCmbVoltage().getSelectedItem()).getVoltage(),
                      Double.valueOf(viewMainFeeder.getJspPowerFactor().getValue().toString()),
                      2)));

      calibersHearthFound =
          MethodsForCalculationsGlobal.calculate_calibersHearth(
              viewMainFeeder.getPotency_total(),
              (Voltage) viewMainFeeder.getCmbVoltage().getSelectedItem(),
              Double.valueOf(viewMainFeeder.getJspPowerFactor().getValue().toString()),
              2);

      if (caliberPhaseFound == null) {
        MessagesStructure.Warning(
            MessagesStructure.format(
                200, messages.getProperty(Messages.CALIBER_NO_FOUND), MessagesStructure.justify));
      } else {
        viewMainFeeder.getCmbCaliber().setSelectedItem(caliberPhaseFound.getCaliber());
        viewMainFeeder.getCmbCalibersNeutral().setSelectedItem(caliberNeutralFound.getCaliber());
        if (((Material) viewMainFeeder.getCmbMaterial().getSelectedItem())
            .getName()
            .equals(TypeMaterials.COOPER.getMaterial())) {
          viewMainFeeder
              .getLblCaliberPhase()
              .setText(
                  "3 Cables"
                      + " #"
                      + caliberPhaseFound.getCaliber().getName()
                      + " Cu "
                      + MethodsForCalculationsGlobal.typeCaliber(
                          typeCaliber,
                          (Temperature) viewMainFeeder.getCmbTemperature().getSelectedItem())
                      + " "
                      + "3x"
                      + breakerPhaseFound.getCapacity());
          viewMainFeeder
              .getLblCaliberNeutral()
              .setText(
                  "2 Cables"
                      + " #"
                      + caliberNeutralFound.getCaliber().getName()
                      + " Cu "
                      + MethodsForCalculationsGlobal.typeCaliber(
                          typeCaliber,
                          (Temperature) viewMainFeeder.getCmbTemperature().getSelectedItem()));
        } else if (((Material) viewMainFeeder.getCmbMaterial().getSelectedItem())
            .getName()
            .equals(TypeMaterials.ALUMINIUM.getMaterial())) {
          viewMainFeeder
              .getLblCaliberPhase()
              .setText(
                  "3 Cables"
                      + " #"
                      + caliberPhaseFound.getCaliber().getName()
                      + " Al "
                      + MethodsForCalculationsGlobal.typeCaliber(
                          typeCaliber,
                          (Temperature) viewMainFeeder.getCmbTemperature().getSelectedItem())
                      + " "
                      + "3x"
                      + breakerPhaseFound.getCapacity());
          viewMainFeeder
              .getLblCaliberNeutral()
              .setText(
                  "2 Cables"
                      + " #"
                      + caliberNeutralFound.getCaliber().getName()
                      + " Al "
                      + MethodsForCalculationsGlobal.typeCaliber(
                          typeCaliber,
                          (Temperature) viewMainFeeder.getCmbTemperature().getSelectedItem()));
        }
        if (calibersHearthFound == null) {
          viewMainFeeder.getLblCaliberEarth().setText("No aplica");
        } else {
          viewMainFeeder
              .getLblCaliberEarth()
              .setText(
                  "1 Cable "
                      + calibersHearthFound.getCaliber().getName()
                      + " "
                      + MethodsForCalculationsGlobal.typeCaliber(
                          typeCaliber,
                          (Temperature) viewMainFeeder.getCmbTemperature().getSelectedItem()));
        }
        viewMainFeeder.getBtnCalculateBreakdown().doClick();
      }
    }
  } // Fin del método.