ObservationUI(PointObsDatatype obs) {
this.obs = obs;
latlonPos.setLatitude(obs.getLocation().getLatitude());
latlonPos.setLongitude(obs.getLocation().getLongitude());
// text bb
Dimension t = textFont.getBoundingBox("O"); // LOOK temp
bb =
new Rectangle2D.Double(
-circleRadius, -circleRadius - t.getHeight(), t.getWidth(), t.getHeight());
// add circle bb
bb.add(circleBB);
}
/**
* Convert projection coordinates to a LatLonPoint Note: a new object is not created on each call
* for the return value.
*
* @param world convert from these projection coordinates
* @param result the object to write to
* @return LatLonPoint convert to these lat/lon coordinates
*/
public LatLonPoint projToLatLon(ProjectionPoint world, LatLonPointImpl result) {
double fromX = world.getX() - falseEasting;
double fromY = world.getY() - falseNorthing;
double toLon = Math.toDegrees(fromX / A) + lon0;
double e = Math.exp(-fromY / A);
double toLat = Math.toDegrees(Math.PI / 2 - 2 * Math.atan(e)); // Snyder p 44
result.setLatitude(toLat);
result.setLongitude(toLon);
return result;
}
private LatLonRect getBoundingBox(List stnList) {
ucar.unidata.geoloc.Station s = (ucar.unidata.geoloc.Station) stnList.get(0);
LatLonPointImpl llpt = new LatLonPointImpl();
llpt.set(s.getLatitude(), s.getLongitude());
LatLonRect rect = new LatLonRect(llpt, .001, .001);
for (int i = 1; i < stnList.size(); i++) {
s = (ucar.unidata.geoloc.Station) stnList.get(i);
llpt.set(s.getLatitude(), s.getLongitude());
rect.extend(llpt);
}
return rect;
}
/**
* Convert lat/lon coordinates to projection coordinates.
*
* @param from array of lat/lon coordinates: from[2][n], where from[0][i], from[1][i] is the
* (lat,lon) coordinate of the ith point
* @param to resulting array of projection coordinates, where to[0][i], to[1][i] is the (x,y)
* coordinate of the ith point
* @param latIndex index of latitude in "from"
* @param lonIndex index of longitude in "from"
* @return the "to" array.
*/
public double[][] latLonToProj(double[][] from, double[][] to, int latIndex, int lonIndex) {
int cnt = from[0].length;
double[] fromLatA = from[latIndex];
double[] fromLonA = from[lonIndex];
double[] resultXA = to[INDEX_X];
double[] resultYA = to[INDEX_Y];
double toX, toY;
for (int i = 0; i < cnt; i++) {
double fromLat = fromLatA[i];
double fromLon = fromLonA[i];
fromLat = Math.toRadians(fromLat);
double lonDiff = Math.toRadians(LatLonPointImpl.lonNormal(fromLon - lon0Degrees));
double cosc = sinLat0 * Math.sin(fromLat) + cosLat0 * Math.cos(fromLat) * Math.cos(lonDiff);
if (cosc >= 0) {
toX = R * Math.cos(fromLat) * Math.sin(lonDiff);
toY = R * (cosLat0 * Math.sin(fromLat) - sinLat0 * Math.cos(fromLat) * Math.cos(lonDiff));
} else {
toX = Double.POSITIVE_INFINITY;
toY = Double.POSITIVE_INFINITY;
}
resultXA[i] = toX;
resultYA[i] = toY;
}
return to;
}
/**
* get all radar station within box.
*
* @param boundingBox _more_
* @param cancel _more_
* @return List of type DqcRadarStation objects
* @throws IOException java io exception
*/
public List getStations(
ucar.unidata.geoloc.LatLonRect boundingBox, ucar.nc2.util.CancelTask cancel)
throws IOException {
List sl = selStation.getStations();
ArrayList dsl = new ArrayList();
for (Iterator it = sl.iterator(); it.hasNext(); ) {
Station s = (Station) it.next();
LatLonPointImpl latlonPt = new LatLonPointImpl();
latlonPt.set(s.getLocation().getLatitude(), s.getLocation().getLongitude());
if (boundingBox.contains(latlonPt)) {
dsl.add(s);
}
if ((cancel != null) && cancel.isCancel()) {
return null;
}
}
return dsl;
}
/**
* Convert projection coordinates to a LatLonPoint Note: a new object is not created on each call
* for the return value.
*
* @param world convert from these projection coordinates
* @param result the object to write to
* @return LatLonPoint convert to these lat/lon coordinates
*/
public LatLonPoint projToLatLon(ProjectionPoint world, LatLonPointImpl result) {
double toLat, toLon;
double fromX = world.getX();
double fromY = world.getY();
double rho = Math.sqrt(fromX * fromX + fromY * fromY);
double c = Math.asin(rho / R);
toLon = lon0;
double temp = 0;
if (Math.abs(rho) > TOLERANCE) {
toLat = Math.asin(Math.cos(c) * sinLat0 + (fromY * Math.sin(c) * cosLat0 / rho));
if (Math.abs(lat0 - PI_OVER_4) > TOLERANCE) { // not 90 or -90
temp = rho * cosLat0 * Math.cos(c) - fromY * sinLat0 * Math.sin(c);
toLon = lon0 + Math.atan(fromX * Math.sin(c) / temp);
} else if (lat0 == PI_OVER_4) {
toLon = lon0 + Math.atan(fromX / -fromY);
temp = -fromY;
} else {
toLon = lon0 + Math.atan(fromX / fromY);
temp = fromY;
}
} else {
toLat = lat0;
}
toLat = Math.toDegrees(toLat);
toLon = Math.toDegrees(toLon);
if (temp < 0) {
toLon += 180;
}
toLon = LatLonPointImpl.lonNormal(toLon);
result.setLatitude(toLat);
result.setLongitude(toLon);
return result;
}
/**
* Convert a LatLonPoint to projection coordinates
*
* @param latLon convert from these lat, lon coordinates
* @param result the object to write to
* @return the given result
*/
public ProjectionPoint latLonToProj(LatLonPoint latLon, ProjectionPointImpl result) {
double toX, toY;
double fromLat = latLon.getLatitude();
double fromLon = latLon.getLongitude();
double fromLat_r = Math.toRadians(fromLat);
// infinite projection
if ((Math.abs(90.0 - Math.abs(fromLat))) < TOLERANCE) {
toX = Double.POSITIVE_INFINITY;
toY = Double.POSITIVE_INFINITY;
} else {
toX = A * Math.toRadians(LatLonPointImpl.range180(fromLon - this.lon0));
toY = A * SpecialMathFunction.atanh(Math.sin(fromLat_r)); // p 41 Snyder
}
result.setLocation(toX + falseEasting, toY + falseNorthing);
return result;
}
/**
* Convert lat/lon coordinates to projection coordinates.
*
* @param from array of lat/lon coordinates: from[2][n], where (from[0][i], from[1][i]) is the
* (lat,lon) coordinate of the ith point
* @param to resulting array of projection coordinates: to[2][n] where (to[0][i], to[1][i]) is the
* (x,y) coordinate of the ith point
* @return the "to" array
*/
public double[][] projToLatLon(double[][] from, double[][] to) {
int cnt = from[0].length;
double[] fromXA = from[INDEX_X];
double[] fromYA = from[INDEX_Y];
double[] toLatA = to[INDEX_LAT];
double[] toLonA = to[INDEX_LON];
double toLat, toLon;
for (int i = 0; i < cnt; i++) {
double fromX = fromXA[i];
double fromY = fromYA[i];
double rho = Math.sqrt(fromX * fromX + fromY * fromY);
double c = Math.asin(rho / R);
toLon = lon0;
double temp = 0;
if (Math.abs(rho) > TOLERANCE) {
toLat = Math.asin(Math.cos(c) * sinLat0 + (fromY * Math.sin(c) * cosLat0 / rho));
if (Math.abs(lat0 - PI_OVER_4) > TOLERANCE) { // not 90 or -90
temp = rho * cosLat0 * Math.cos(c) - fromY * sinLat0 * Math.sin(c);
toLon = lon0 + Math.atan(fromX * Math.sin(c) / temp);
} else if (lat0 == PI_OVER_4) {
toLon = lon0 + Math.atan(fromX / -fromY);
temp = -fromY;
} else {
toLon = lon0 + Math.atan(fromX / fromY);
temp = fromY;
}
} else {
toLat = lat0;
}
toLat = Math.toDegrees(toLat);
toLon = Math.toDegrees(toLon);
if (temp < 0) {
toLon += 180;
}
toLon = LatLonPointImpl.lonNormal(toLon);
toLatA[i] = toLat;
toLonA[i] = toLon;
}
return to;
}
/**
* @param refPt The geodetic position of the reference point.
* @param neiPt The holder for the geodetic position of the neighboring grid point.
* @param lat The latitude of the neighboring grid point.
* @param lon The longitude of the neighboring grid point.
* @param azTerm An amount in degrees to be added to the computed azimuth.
* @param bearing The holder for the computed range and bearing from the reference point to the
* neighboring grid point.
* @param hat 2-element output array for computed (x,y) components of unit vector.
*/
private static void compute(
LatLonPointImpl refPt,
LatLonPointImpl neiPt,
float lat,
float lon,
float azTerm,
Bearing bearing,
float[] hat) {
neiPt.set(lat, lon);
Bearing.calculateBearing(refPt, neiPt, bearing);
float az = (float) Math.toRadians(bearing.getAngle() + azTerm);
// System.out.println("bearing.Angle = " + bearing.getAngle() + "; azTerm = " + azTerm+ ";
// result= " + Math.toDegrees(az));
hat[0] = (float) Math.sin(az);
hat[1] = (float) Math.cos(az);
}
/**
* Convert a LatLonPoint to projection coordinates
*
* @param latLon convert from these lat, lon coordinates
* @param result the object to write to
* @return the given result
*/
public ProjectionPoint latLonToProj(LatLonPoint latLon, ProjectionPointImpl result) {
double toX, toY;
double fromLat = latLon.getLatitude();
double fromLon = latLon.getLongitude();
fromLat = Math.toRadians(fromLat);
double lonDiff = Math.toRadians(LatLonPointImpl.lonNormal(fromLon - lon0Degrees));
double cosc = sinLat0 * Math.sin(fromLat) + cosLat0 * Math.cos(fromLat) * Math.cos(lonDiff);
if (cosc >= 0) {
toX = R * Math.cos(fromLat) * Math.sin(lonDiff);
toY = R * (cosLat0 * Math.sin(fromLat) - sinLat0 * Math.cos(fromLat) * Math.cos(lonDiff));
} else {
toX = Double.POSITIVE_INFINITY;
toY = Double.POSITIVE_INFINITY;
}
result.setLocation(toX, toY);
return result;
}
/**
* _more_
*
* @param stationLat _more_
* @param stationLon _more_
* @throws RemoteException _more_
* @throws VisADException _more_
*/
protected void initLinePosition(float stationLat, float stationLon)
throws VisADException, RemoteException {
if (getVerticalAxisRange() == null) {
setVerticalAxisRange(new Range(0, 20000));
}
// get station location from the data coordinate transform
LatLonPointImpl lp1 = Bearing.findPoint(stationLat, stationLon, 0, 150.0f, null);
LatLonPointImpl lp2 = Bearing.findPoint(stationLat, stationLon, 180, 150.0f, null);
startLocation = new EarthLocationTuple(lp2.getLatitude(), lp2.getLongitude(), 0.0);
endLocation = new EarthLocationTuple(lp1.getLatitude(), lp1.getLongitude(), 0.0);
}
/**
* @param refPt The geodetic position of the reference point.
* @param neiPt The holder for the geodetic position of the neighboring grid point.
* @param lat The latitude of the neighboring grid point.
* @param lon The longitude of the neighboring grid point.
* @param azTerm An amount in degrees to be added to the computed azimuth.
* @param wind Magnitude of grid-relative wind component.
* @param bearing The holder for the computed range and bearing from the reference point to the
* neighboring grid point.
* @param uv 2-element output array for computed (U,V) wind components.
*/
private static void compute(
LatLonPointImpl refPt,
LatLonPointImpl neiPt,
float lat,
float lon,
float azTerm,
float wind,
Bearing bearing,
float[] uv) {
neiPt.set(lat, lon);
Bearing.calculateBearing(refPt, neiPt, bearing);
float az = (float) Math.toRadians(bearing.getAngle() + azTerm);
float xhat = (float) Math.sin(az);
float yhat = (float) Math.cos(az);
uv[0] = xhat * wind;
uv[1] = yhat * wind;
}
/**
* @param grid The grid.
* @param gridWinds The grid-relative winds.
* @param cs The coordinate system transformation of the grid.
* @param index The index of the grid-relative wind component.
* @param latI The index of latitude in the reference coordinate system.
* @param lonI The index of longitude in the reference coordinate system.
* @param us The array in which to add the computed U-component of the wind.
* @param us The array in which to add the computed V-component of the wind.
* @param vs
* @throws IndexOutOfBoundsException if <code>gridWinds</code>, <code>us
* </code>, or <code>vs</code> is too small.
* @throws VisADException if a VisAD failure occurs.
*/
private static void addComponent(
SampledSet grid,
float[][] gridWinds,
CoordinateSystem cs,
int index,
int latI,
int lonI,
float[] us,
float[] vs)
throws VisADException {
int[][] neighbors = grid.getNeighbors(index);
LatLonPointImpl refPt = new LatLonPointImpl();
LatLonPointImpl neiPt = new LatLonPointImpl();
Bearing bearing = new Bearing();
float[] uv1 = new float[2];
float[] uv2 = new float[2];
boolean hasCS = cs != null;
float[][] domainSamples = grid.getSamples(false);
float[][] crefCoords = (hasCS) ? cs.toReference(Set.copyFloats(domainSamples)) : domainSamples;
// If the grid is lat/lon or has an IdentityCoordinateSystem
// don't do the rotation
// TODO: handle rotated lat/lon grids
if (!hasCS
|| (crefCoords == domainSamples)
|| (Arrays.equals(crefCoords[latI], domainSamples[latI])
&& Arrays.equals(crefCoords[lonI], domainSamples[lonI]))) {
// us = gridWinds[0];
// vs = gridWinds[1];
System.arraycopy(gridWinds[0], 0, us, 0, us.length);
System.arraycopy(gridWinds[1], 0, vs, 0, vs.length);
} else {
for (int i = 0; i < neighbors.length; i++) {
float[][] refCoords = grid.indexToValue(new int[] {i});
if (hasCS) {
refCoords = cs.toReference(refCoords);
}
float[][] neiCoords = grid.indexToValue(neighbors[i]);
if (hasCS) {
neiCoords = cs.toReference(neiCoords);
}
refPt.set(refCoords[latI][0], refCoords[lonI][0]);
compute(
refPt,
neiPt,
neiCoords[latI][0],
neiCoords[lonI][0],
-180,
gridWinds[index][i],
bearing,
uv1);
float d1 = (float) bearing.getDistance();
compute(
refPt,
neiPt,
neiCoords[latI][1],
neiCoords[lonI][1],
0,
gridWinds[index][i],
bearing,
uv2);
float d2 = (float) bearing.getDistance();
boolean bad1 = Double.isNaN(d1);
boolean bad2 = Double.isNaN(d2);
if (bad1 && bad2) {
us[i] = Float.NaN;
vs[i] = Float.NaN;
} else {
if (bad1) {
us[i] += uv2[0];
vs[i] += uv2[1];
} else if (bad2) {
us[i] += uv1[0];
vs[i] += uv1[1];
} else {
float tot = d1 + d2;
float c1 = d2 / tot;
float c2 = d1 / tot;
us[i] += c1 * uv1[0] + c2 * uv2[0];
vs[i] += c1 * uv1[1] + c2 * uv2[1];
}
}
}
}
}
/**
* I have no idea what this does.
*
* @param grid sampling grid
* @param index some sort of index
* @return a new flat field with something different
* @throws RemoteException Java RMI error
* @throws VisADException VisAD error
*/
private static FlatField hatFieldOld(Set grid, int index) throws VisADException, RemoteException {
CoordinateSystem cs = grid.getCoordinateSystem();
boolean hasCS = (cs != null);
RealTupleType rtt = (hasCS) ? cs.getReference() : ((SetType) grid.getType()).getDomain();
int latI = rtt.getIndex(RealType.Latitude);
if (latI == -1) {
throw new IllegalArgumentException(grid.toString());
}
int lonI = rtt.getIndex(RealType.Longitude);
if (lonI == -1) {
throw new IllegalArgumentException(grid.toString());
}
if (grid.getManifoldDimension() < 2) {
throw new IllegalArgumentException(grid.toString());
}
int[][] neighbors = grid.getNeighbors(index);
LatLonPointImpl refPt = new LatLonPointImpl();
LatLonPointImpl neiPt = new LatLonPointImpl();
Bearing bearing = new Bearing();
float[] hat1 = new float[2];
float[] hat2 = new float[2];
float[][] hat = new float[2][grid.getLength()];
for (int i = 0; i < neighbors.length; i++) {
float[][] refCoords = grid.indexToValue(new int[] {i});
if (hasCS) {
refCoords = cs.toReference(refCoords);
}
float[][] neiCoords = grid.indexToValue(neighbors[i]);
if (hasCS) {
neiCoords = cs.toReference(neiCoords);
}
refPt.set(refCoords[latI][0], refCoords[lonI][0]);
compute(refPt, neiPt, neiCoords[latI][0], neiCoords[lonI][0], -180, bearing, hat1);
float d1 = (float) bearing.getDistance();
compute(refPt, neiPt, neiCoords[latI][1], neiCoords[lonI][1], 0, bearing, hat2);
float d2 = (float) bearing.getDistance();
boolean bad1 = Double.isNaN(d1);
boolean bad2 = Double.isNaN(d2);
if (bad1 && bad2) {
hat[0][i] = Float.NaN;
hat[1][i] = Float.NaN;
} else {
if (bad1) {
hat[0][i] = hat2[0];
hat[1][i] = hat2[1];
} else if (bad2) {
hat[0][i] = hat1[0];
hat[1][i] = hat1[1];
} else {
float tot = d1 + d2;
float c1 = d2 / tot;
float c2 = d1 / tot;
float xhat = c1 * hat1[0] + c2 * hat2[0];
float yhat = c1 * hat1[1] + c2 * hat2[1];
float mag = (float) Math.sqrt(xhat * xhat + yhat * yhat);
hat[0][i] = xhat / mag;
hat[1][i] = yhat / mag;
}
}
}
FlatField hatField =
new FlatField(
new FunctionType(
((SetType) grid.getType()).getDomain(),
new RealTupleType(
RealType.getRealType("xHat", CommonUnit.dimensionless),
RealType.getRealType("yHat", CommonUnit.dimensionless))),
grid);
hatField.setSamples(hat, false);
return hatField;
}
/**
* The returned {@link visad.FlatField} will have NaN-s for those unit vector components that
* could not be computed.
*
* @param grid The spatial grid.
* @param index The index of the manifold dimension along which to compute the unit vector.
* @return A field of components of the unit vector for the given manifold dimension.
* @throws NullPointerException if the grid is <code>null</code>.
* @throws IllegalArgumentException if the manifold dimension of the grid is less than 2 or if the
* grid doesn't contain {@link visad.RealType#Latitude} and {@link visad.RealType#Longitude}.
* @throws VisADException if a VisAD failure occurs.
* @throws RemoteException if a Java RMI failure occurs.
*/
private static FlatField hatFieldNew(Set grid, int index) throws VisADException, RemoteException {
CoordinateSystem cs = grid.getCoordinateSystem();
boolean hasCS = cs != null;
RealTupleType rtt = (hasCS) ? cs.getReference() : ((SetType) grid.getType()).getDomain();
int latI = rtt.getIndex(RealType.Latitude);
if (latI == -1) {
throw new IllegalArgumentException(rtt.toString());
}
int lonI = rtt.getIndex(RealType.Longitude);
if (lonI == -1) {
throw new IllegalArgumentException(rtt.toString());
}
if (grid.getManifoldDimension() < 2) {
throw new IllegalArgumentException(grid.toString());
}
int[][] neighbors = grid.getNeighbors(index);
LatLonPointImpl refPt = new LatLonPointImpl();
LatLonPointImpl neiPt = new LatLonPointImpl();
Bearing bearing = new Bearing();
float[] hat1 = new float[2];
float[] hat2 = new float[2];
float[][] hat = new float[2][grid.getLength()];
float[][] refCoords = null;
float[][] neiCoords = null;
float[][] domainSamples = grid.getSamples(false);
refCoords = (hasCS) ? cs.toReference(Set.copyFloats(domainSamples)) : domainSamples;
// If the grid is lat/lon or has an IdentityCoordinateSystem
// don't do the rotation
// TODO: handle rotated lat/lon grids
if (!hasCS
|| (refCoords == domainSamples)
|| (Arrays.equals(refCoords[latI], domainSamples[latI])
&& Arrays.equals(refCoords[lonI], domainSamples[lonI]))) {
if (index == 0) {
Arrays.fill(hat[0], 1);
Arrays.fill(hat[1], 0);
} else {
Arrays.fill(hat[0], 0);
Arrays.fill(hat[1], 1);
}
} else {
float latBefore, lonBefore, latAfter, lonAfter;
// int backOffset = (index==0) ? -180 : 0;
// int foreOffset = (index==0) ? 0 : -180;
int backOffset = -180;
int foreOffset = 0;
for (int i = 0; i < neighbors.length; i++) {
refPt.set(refCoords[latI][i], refCoords[lonI][i]);
if ((neighbors[i][0] < 0) || (neighbors[i][0] >= neighbors.length)) {
latBefore = Float.NaN;
lonBefore = Float.NaN;
} else {
latBefore = refCoords[latI][neighbors[i][0]];
lonBefore = refCoords[lonI][neighbors[i][0]];
}
if ((neighbors[i][1] < 0) || (neighbors[i][1] >= neighbors.length)) {
latAfter = Float.NaN;
lonAfter = Float.NaN;
} else {
latAfter = refCoords[latI][neighbors[i][1]];
lonAfter = refCoords[lonI][neighbors[i][1]];
}
compute(refPt, neiPt, latBefore, lonBefore, backOffset, bearing, hat1);
float d1 = (float) bearing.getDistance();
compute(refPt, neiPt, latAfter, lonAfter, foreOffset, bearing, hat2);
float d2 = (float) bearing.getDistance();
boolean bad1 = Double.isNaN(d1);
boolean bad2 = Double.isNaN(d2);
if (bad1 && bad2) {
hat[0][i] = Float.NaN;
hat[1][i] = Float.NaN;
} else {
if (bad1) {
hat[0][i] = hat2[0];
hat[1][i] = hat2[1];
} else if (bad2) {
hat[0][i] = hat1[0];
hat[1][i] = hat1[1];
} else {
float tot = d1 + d2;
float c1 = d2 / tot;
float c2 = d1 / tot;
float xhat = c1 * hat1[0] + c2 * hat2[0];
float yhat = c1 * hat1[1] + c2 * hat2[1];
float mag = (float) Math.sqrt(xhat * xhat + yhat * yhat);
hat[0][i] = xhat / mag;
hat[1][i] = yhat / mag;
}
}
}
}
FlatField hatField =
new FlatField(
new FunctionType(
((SetType) grid.getType()).getDomain(),
new RealTupleType(
RealType.getRealType("xHat", CommonUnit.dimensionless),
RealType.getRealType("yHat", CommonUnit.dimensionless))),
grid);
hatField.setSamples(hat, false);
return hatField;
}
/**
* set the Wind Direction, in degrees (0 = north) from [0, 360)
*
* @param windDirection
*/
public void setWindDirection(double windDirection) {
this.windDirection = ucar.unidata.geoloc.LatLonPointImpl.lonNormal360(windDirection);
}