예제 #1
0
파일: Node.java 프로젝트: Jinxzy/P2PIoT
  @GET
  @Path("/predecessor-of/{param}")
  public NodeInfo findPredecessor(@PathParam("param") int id) {

    // Checks if the id searched for is greater/equal to this nodes ID, and smaller/equal than
    // successors nodes ID, in which case this node should be returned
    // if(id >= this.id && id < successorID()).
    if (this.id < id && successor.getID() >= id) {
      return thisNode;
    }
    // Check if successor is smaller than this node ID, and if searched ID is in between. If so
    // we're crossing the '0' line, and this node is predecessor
    // if(succID < this.id)
    // if(id > this.id || id < succID
    else if (successor.getID() < this.id) { // we are the highest id in the hood
      if (this.id < id || successor.getID() >= id) {
        return thisNode;
      }
    }
    // Special case, only this node in network
    else if (successor.getID() == this.id) {
      return thisNode;
    }

    // System.out.println(this.id + ": Routed to node " + successor.getID());
    // return requestSender.findIdPredecessor(successor, id);
    // System.out.println(this.id + ": Routed to node " + closestPreceedingFinger(id).getID());
    return requestSender.findIdPredecessor(closestPreceedingFinger(id), id);
  }
예제 #2
0
파일: Node.java 프로젝트: Jinxzy/P2PIoT
  // Updates the finger table with the {param} ID node as potential finger
  @PUT
  @Path("/update/{param}")
  @Produces(MediaType.APPLICATION_JSON)
  public Response updateFingerTable(NodeInfo n, @PathParam("param") int fingerNr) {

    if (isInRange(n.getID(), thisNode.getID(), fingers[fingerNr].getID())) {
      fingers[fingerNr] = n;
      requestSender.updateFingerTable(predecessor, n, fingerNr);
    }

    return Response.status(200).entity(n).build();
  }
예제 #3
0
파일: Node.java 프로젝트: Jinxzy/P2PIoT
  public void takeResponsibilities() {
    String responsible = requestSender.takePhotonResponsibility(successor, thisNode.getID());

    if (responsible.equals("true")) {
      System.out.println("Becoming new responsible node");
      photonData = requestSender.getPhotonData(successor).getList();
      updatePhoton(thisNode); // Begin being the responsible node
    }
  }
예제 #4
0
파일: Node.java 프로젝트: Jinxzy/P2PIoT
 public NodeInfo closestPreceedingFinger(int id) {
   for (int i = 15; i >= 0; i--) {
     int fID = fingers[i].getID();
     if (isInRange(fID, thisNode.getID(), id)) {
       return fingers[i];
     }
   }
   // Returning this node here means something went wrong with the node routing, and it will loop
   // forever
   System.out.println("Shouldn't happen");
   return thisNode;
 }
예제 #5
0
파일: Node.java 프로젝트: Jinxzy/P2PIoT
  // Receive data from node responsible for data, for replication purposes
  @POST
  @Path("/sendPhotonData")
  @Consumes(MediaType.APPLICATION_JSON)
  public Response replicatePhotonData(PhotonData pd) {

    if (photonData.isEmpty()) {
      photonData = requestSender.getPhotonData(predecessor).getList();
    } else {
      photonData.add(pd);
    }
    replicatedValue = pd.replica--;
    if (pd.replica > 0) {

      if (successor.getID() != thisNode.getID()) {
        requestSender.sendPhotonData(successor, pd);
      }
    }
    // System.out.println(thisNode.getPort() + " recieved bunch of data: " + photonData.toString());

    return Response.status(200).entity(pd).build();
  }
예제 #6
0
파일: Node.java 프로젝트: Jinxzy/P2PIoT
  public void initFingerTable(String ip, int port) {
    // Set first finger, which is just immediate successor
    fingers[0] = successor;

    // Fill finger table
    NodeInfo recentFinger = fingers[0];
    int nextFingerID = 0;

    for (int i = 1; i < 16; i++) {
      nextFingerID = (thisNode.getID() + (int) Math.pow(2, i)) % (int) Math.pow(2, 16);

      if (isInRange(nextFingerID, thisNode.getID(), recentFinger.getID())) {
        fingers[i] = recentFinger;
      }

      // ID searched is higher than our current finger, so we ask it to find the next one for us.
      else {
        recentFinger = requestSender.findIdSuccessor(ip, port, nextFingerID);
        fingers[i] = recentFinger;
      }
    }
  }
예제 #7
0
파일: Node.java 프로젝트: Jinxzy/P2PIoT
  private void updateOthers() {
    requestSender.updateNodeSuccessor(predecessor, thisNode);
    requestSender.updateNodePredecessor(successor, thisNode);

    int preceedingNodeID;

    for (int i = 0; i < 16; i++) {
      preceedingNodeID =
          ((int) Math.pow(2, 16) + thisNode.getID() - (int) Math.pow(2, i)) % (int) Math.pow(2, 16);

      NodeInfo p = findPredecessor(preceedingNodeID);
      requestSender.updateFingerTable(p, thisNode, i);
    }
  }
예제 #8
0
파일: Node.java 프로젝트: Jinxzy/P2PIoT
 // Finds the responsible node for the photon and updates it and the successor of it
 public void findResponsibleNode() {
   String photonJson = requestSender.findSpark();
   try {
     JSONObject temp = new JSONObject(photonJson);
     JSONObject temp2 = temp.getJSONObject("coreInfo");
     String deviceID = temp2.getString("deviceID");
     int convertedID = Key.generate16BitsKey(deviceID);
     NodeInfo responsible = findSuccessor(convertedID);
     // NodeInfo resposibleSuccessor = requestSender.getNodeSuccessor(responsible);
     requestSender.updatePhoton(responsible);
     // requestSender.updatePhoton(resposibleSuccessor);
     System.out.println("PhotonID: " + convertedID);
     System.out.println("Responsible is:\n" + responsible.getID());
   } catch (JSONException e) {
     e.printStackTrace();
   }
 }
예제 #9
0
파일: Node.java 프로젝트: Jinxzy/P2PIoT
  public void join(String ip, int port) { // n is existing known node to bootstrap into the network

    System.out.println(this.port + ": Joining");

    // Initialize own successor/predecessors
    successor = requestSender.findIdSuccessor(ip, port, thisNode.getID());

    // No ID needed for path
    predecessor = requestSender.getNodePredecessor(successor);

    takeResponsibilities();

    // createTimerCheckPredecessor();

    initFingerTable(ip, port);
    listenToRequests();
    System.out.println(this.port + ": Listening");

    // Update successors and predecessor with this node
    updateOthers();
    System.out.println("Join complete!");
    System.out.println("Check the node at status at " + thisNode.getIndex());
  }
예제 #10
0
파일: Node.java 프로젝트: Jinxzy/P2PIoT
 public void printTable() {
   for (NodeInfo n : fingers) {
     System.out.println(n.getIP() + ":" + n.getPort() + "/" + n.getID());
   }
 }