예제 #1
0
  /**
   * Indicates that the security is timeouted, is not supported by the other end.
   *
   * @param evt Details about the event that caused this message.
   */
  public void securityTimeout(final CallPeerSecurityTimeoutEvent evt) {
    if (!SwingUtilities.isEventDispatchThread()) {
      SwingUtilities.invokeLater(
          new Runnable() {
            public void run() {
              securityTimeout(evt);
            }
          });
      return;
    }

    if (securityPanel != null) securityPanel.securityTimeout(evt);
  }
예제 #2
0
  /**
   * Indicates that the security has gone off.
   *
   * @param evt the <tt>CallPeerSecurityOffEvent</tt> that notified us
   */
  public void securityOff(final CallPeerSecurityOffEvent evt) {
    if (!SwingUtilities.isEventDispatchThread()) {
      SwingUtilities.invokeLater(
          new Runnable() {
            public void run() {
              securityOff(evt);
            }
          });
      return;
    }

    if (evt.getSessionType() == CallPeerSecurityOffEvent.AUDIO_SESSION) {
      securityStatusLabel.setText("");
      securityStatusLabel.setSecurityOff();
      if (securityStatusLabel.getBorder() == null)
        securityStatusLabel.setBorder(BorderFactory.createEmptyBorder(2, 5, 2, 3));
    }

    securityPanel.securityOff(evt);
  }
예제 #3
0
  /**
   * Shows/hides the security panel.
   *
   * @param isVisible <tt>true</tt> to show the security panel, <tt>false</tt> to hide it
   */
  public void setSecurityPanelVisible(final boolean isVisible) {
    if (!SwingUtilities.isEventDispatchThread()) {
      SwingUtilities.invokeLater(
          new Runnable() {
            public void run() {
              setSecurityPanelVisible(isVisible);
            }
          });
      return;
    }

    final JFrame callFrame = callRenderer.getCallContainer().getCallWindow().getFrame();

    final JPanel glassPane = (JPanel) callFrame.getGlassPane();

    if (!isVisible) {
      // Need to hide the security panel explicitly in order to keep the
      // fade effect.
      securityPanel.setVisible(false);
      glassPane.setVisible(false);
      glassPane.removeAll();
    } else {
      glassPane.setLayout(null);
      glassPane.addMouseListener(
          new MouseListener() {
            public void mouseClicked(MouseEvent e) {
              redispatchMouseEvent(glassPane, e);
            }

            public void mouseEntered(MouseEvent e) {
              redispatchMouseEvent(glassPane, e);
            }

            public void mouseExited(MouseEvent e) {
              redispatchMouseEvent(glassPane, e);
            }

            public void mousePressed(MouseEvent e) {
              redispatchMouseEvent(glassPane, e);
            }

            public void mouseReleased(MouseEvent e) {
              redispatchMouseEvent(glassPane, e);
            }
          });

      Point securityLabelPoint = securityStatusLabel.getLocation();

      Point newPoint =
          SwingUtilities.convertPoint(
              securityStatusLabel.getParent(),
              securityLabelPoint.x,
              securityLabelPoint.y,
              callFrame);

      securityPanel.setBeginPoint(new Point((int) newPoint.getX() + 15, 0));
      securityPanel.setBounds(0, (int) newPoint.getY() - 5, this.getWidth(), 130);

      glassPane.add(securityPanel);
      // Need to show the security panel explicitly in order to keep the
      // fade effect.
      securityPanel.setVisible(true);
      glassPane.setVisible(true);

      glassPane.addComponentListener(
          new ComponentAdapter() {
            /** Invoked when the component's size changes. */
            @Override
            public void componentResized(ComponentEvent e) {
              if (glassPane.isVisible()) {
                glassPane.setVisible(false);
                callFrame.removeComponentListener(this);
              }
            }
          });
    }
  }
예제 #4
0
  /**
   * Indicates that the security is turned on.
   *
   * <p>Sets the secured status icon to the status panel and initializes/updates the corresponding
   * security details.
   *
   * @param evt Details about the event that caused this message.
   */
  public void securityOn(final CallPeerSecurityOnEvent evt) {
    if (!SwingUtilities.isEventDispatchThread()) {
      SwingUtilities.invokeLater(
          new Runnable() {
            public void run() {
              securityOn(evt);
            }
          });
      return;
    }

    // If the securityOn is called without a specific event, we'll just set
    // the security label status to on.
    if (evt == null) {
      securityStatusLabel.setSecurityOn();
      return;
    }

    SrtpControl srtpControl = evt.getSecurityController();

    if (!srtpControl.requiresSecureSignalingTransport()
        || callPeer.getProtocolProvider().isSignalingTransportSecure()) {
      if (srtpControl instanceof ZrtpControl) {
        securityStatusLabel.setText("zrtp");

        if (!((ZrtpControl) srtpControl).isSecurityVerified())
          securityStatusLabel.setSecurityPending();
        else securityStatusLabel.setSecurityOn();
      } else securityStatusLabel.setSecurityOn();
    }

    // if we have some other panel, using other control
    if (!srtpControl.getClass().isInstance(securityPanel.getSecurityControl())
        || (securityPanel instanceof ParanoiaTimerSecurityPanel)) {
      setSecurityPanelVisible(false);

      securityPanel = SecurityPanel.create(this, callPeer, srtpControl);

      if (srtpControl instanceof ZrtpControl)
        ((ZrtpSecurityPanel) securityPanel).setSecurityStatusLabel(securityStatusLabel);
    }

    securityPanel.securityOn(evt);

    boolean isSecurityLowPriority =
        Boolean.parseBoolean(
            GuiActivator.getResources()
                .getSettingsString("impl.gui.I_DONT_CARE_THAT_MUCH_ABOUT_SECURITY"));

    // Display ZRTP panel in case SAS was not verified or a AOR mismtach
    // was detected during creation of ZrtpSecurityPanel.
    // Don't show panel if user does not care about security at all.
    if (srtpControl instanceof ZrtpControl
        && !isSecurityLowPriority
        && (!((ZrtpControl) srtpControl).isSecurityVerified()
            || ((ZrtpSecurityPanel) securityPanel).isZidAorMismatch())) {
      setSecurityPanelVisible(true);
    }

    this.revalidate();
  }
예제 #5
0
  /**
   * Creates a <tt>CallPeerPanel</tt> for the given call peer.
   *
   * @param callRenderer the renderer of the call
   * @param callPeer the <tt>CallPeer</tt> represented in this panel
   * @param uiVideoHandler the facility which is to aid the new instance in the dealing with the
   *     video-related information
   */
  public OneToOneCallPeerPanel(
      SwingCallRenderer callRenderer, CallPeer callPeer, UIVideoHandler2 uiVideoHandler) {
    this.callRenderer = callRenderer;
    this.callPeer = callPeer;
    // we need to obtain call as soon as possible
    // cause if it fails too quickly we may fail to show it
    this.call = callPeer.getCall();
    this.uiVideoHandler = uiVideoHandler;

    peerName = CallManager.getPeerDisplayName(callPeer);
    securityPanel = SecurityPanel.create(this, callPeer, null);

    photoLabel = new JLabel(getPhotoLabelIcon());
    center = createCenter();
    statusBar = createStatusBar();

    setPeerImage(CallManager.getPeerImage(callPeer));

    /* Lay out the main Components of the UI. */
    setLayout(new GridBagLayout());

    GridBagConstraints cnstrnts = new GridBagConstraints();

    if (center != null) {
      cnstrnts.fill = GridBagConstraints.BOTH;
      cnstrnts.gridx = 0;
      cnstrnts.gridy = 1;
      cnstrnts.weightx = 1;
      cnstrnts.weighty = 1;
      add(center, cnstrnts);
    }
    if (statusBar != null) {
      cnstrnts.fill = GridBagConstraints.NONE;
      cnstrnts.gridx = 0;
      cnstrnts.gridy = 3;
      cnstrnts.weightx = 0;
      cnstrnts.weighty = 0;
      cnstrnts.insets = new Insets(5, 0, 0, 0);
      add(statusBar, cnstrnts);
    }

    createSoundLevelIndicators();
    initSecuritySettings();

    /*
     * Add the listeners which will be notified about changes in the model
     * and which will update this view.
     */
    callPeerAdapter = new CallPeerAdapter(callPeer, this);
    uiVideoHandler.addObserver(uiVideoHandlerObserver);

    /*
     * This view adapts to whether it is displayed in full-screen or
     * windowed mode.
     */
    if (callRenderer instanceof Component) {
      ((Component) callRenderer).addPropertyChangeListener(CallContainer.PROP_FULL_SCREEN, this);
    }

    OperationSetDesktopSharingClient desktopSharingClient =
        callPeer.getProtocolProvider().getOperationSet(OperationSetDesktopSharingClient.class);
    if (desktopSharingClient != null) {
      desktopSharingMouseAndKeyboardListener =
          new DesktopSharingMouseAndKeyboardListener(callPeer, desktopSharingClient);
    } else desktopSharingMouseAndKeyboardListener = null;

    updateViewFromModel();
  }