/**
* Flushes this output stream, forcing any pending buffered output bytes to be written.
*
* @throws IOException if an I/O error occurs or this stream is already closed
*/
public void flush() throws IOException {
ensureOpen();
// Finish decompressing and writing pending output data
if (!inf.finished()) {
try {
while (!inf.finished() && !inf.needsInput()) {
int n;
// Decompress pending output data
n = inf.inflate(buf, 0, buf.length);
if (n < 1) {
break;
}
// Write the uncompressed output data block
out.write(buf, 0, n);
}
super.flush();
} catch (DataFormatException ex) {
// Improperly formatted compressed (ZIP) data
String msg = ex.getMessage();
if (msg == null) {
msg = "Invalid ZLIB data format";
}
throw new ZipException(msg);
}
}
}
/**
* @param compressed_size or use null if not known
* @param uncompressed_size or use null if not known
* @return uncompressed ByteArrayOutputStream
* @throws IOException
* @throws DataFormatException
*/
private ByteArrayOutputStream unCompress(Integer compressed_size, Integer uncompressed_size)
throws IOException, DataFormatException {
byte[] uncompressed_data = null;
byte[] input_data = null;
ByteArrayOutputStream ret = new ByteArrayOutputStream();
Inflater decompresser = new Inflater(false);
long first_seek = fileChannel.position();
Boolean uncompressing = true;
while (uncompressing) {
if (decompresser.needsInput()) {
input_data = new byte[(compressed_size != null) ? compressed_size.intValue() : 1024];
fileChannel.read(ByteBuffer.wrap(input_data));
decompresser.setInput(input_data, 0, input_data.length);
}
uncompressed_data =
new byte
[(uncompressed_size != null)
? uncompressed_size.intValue()
: (input_data.length * 4)];
decompresser.inflate(uncompressed_data);
int op = (int) (decompresser.getBytesWritten() - (long) ret.size());
if (op > 0) ret.write(uncompressed_data, 0, op);
if (decompresser.finished()) uncompressing = false;
}
fileChannel.position(
(first_seek + decompresser.getBytesRead())); // move file pointer to start of next stream
decompresser.end();
return ret;
}
/**
* Reads uncompressed data into an array of bytes. If <code>len</code> is not zero, the method
* will block until some input can be decompressed; otherwise, no bytes are read and <code>0
* </code> is returned.
*
* @param b the buffer into which the data is read
* @param off the start offset in the destination array <code>b</code>
* @param len the maximum number of bytes read
* @return the actual number of bytes read, or -1 if the end of the compressed input is reached or
* a preset dictionary is needed
* @exception NullPointerException If <code>b</code> is <code>null</code>.
* @exception IndexOutOfBoundsException If <code>off</code> is negative, <code>len</code> is
* negative, or <code>len</code> is greater than <code>b.length - off</code>
* @exception ZipException if a ZIP format error has occurred
* @exception IOException if an I/O error has occurred
*/
public int read(byte[] b, int off, int len) throws IOException {
ensureOpen();
if (b == null) {
throw new NullPointerException();
} else if (off < 0 || len < 0 || len > b.length - off) {
throw new IndexOutOfBoundsException();
} else if (len == 0) {
return 0;
}
try {
int n;
while ((n = inf.inflate(b, off, len)) == 0) {
if (inf.finished() || inf.needsDictionary()) {
reachEOF = true;
return -1;
}
if (inf.needsInput()) {
fill();
}
}
return n;
} catch (DataFormatException e) {
String s = e.getMessage();
throw new ZipException(s != null ? s : "Invalid ZLIB data format");
}
}
@Override
public void decompress() {
if (compressed) {
Inflater decompressor = new Inflater();
decompressor.setInput(data);
ByteArrayOutputStream bos = new ByteArrayOutputStream(data.length);
byte[] buf = new byte[1024];
while (!decompressor.finished()) {
try {
int count = decompressor.inflate(buf);
bos.write(buf, 0, count);
} catch (DataFormatException e) {
}
}
try {
bos.close();
} catch (IOException e) {
}
data = bos.toByteArray();
}
}
private final byte[] uncompress(final byte[] input) throws IOException {
Inflater decompressor = new Inflater();
decompressor.setInput(input);
// Create an expandable byte array to hold the decompressed data
ByteArrayOutputStream bos = new ByteArrayOutputStream(input.length);
// Decompress the data
byte[] buf = new byte[1024];
while (!decompressor.finished()) {
try {
int count = decompressor.inflate(buf);
bos.write(buf, 0, count);
} catch (DataFormatException e) {
// this will happen if the field is not compressed
IOException newException =
new IOException("field data are in wrong format: " + e.toString());
newException.initCause(e);
throw newException;
}
}
decompressor.end();
// Get the decompressed data
return bos.toByteArray();
}
/**
* inflater 解壓縮
*
* @param value
* @return
*/
public static byte[] inflater(byte[] value) {
byte[] result = new byte[0];
Inflater inflater = null;
ByteArrayOutputStream out = null;
try {
inflater = new Inflater();
inflater.setInput(value);
//
out = new ByteArrayOutputStream();
byte[] buffer = new byte[1024];
while (!inflater.finished()) {
int count = inflater.inflate(buffer);
out.write(buffer, 0, count);
}
//
result = out.toByteArray();
} catch (Exception ex) {
ex.printStackTrace();
} finally {
if (inflater != null) {
inflater.end(); // 不end也不會有oom,不過還是關了吧
}
IoHelper.close(out);
}
return result;
}
public static byte[] decompress(byte[] data) throws IOException, DataFormatException {
Inflater inflater = new Inflater();
inflater.setInput(data);
ByteArrayOutputStream outputStream = new ByteArrayOutputStream(data.length);
byte[] buffer = new byte[1024];
while (!inflater.finished()) {
int count = inflater.inflate(buffer);
outputStream.write(buffer, 0, count);
}
outputStream.close();
byte[] output = outputStream.toByteArray();
System.out.println("Original: " + data.length);
System.out.println("Compressed: " + output.length);
return output;
}
private boolean handleCompressedFrame(ChannelHandlerContext ctx, ByteBuf in, List<Object> out)
throws Exception {
if (!in.isReadable(FRAME_COMPRESS_HEADER_LENGTH)) {
return false;
}
int compressedPayloadLength = in.readInt();
if (!in.isReadable(compressedPayloadLength)) {
return false;
}
// decompress payload
Inflater inflater = new Inflater();
if (in.hasArray()) {
inflater.setInput(in.array(), in.arrayOffset() + in.readerIndex(), compressedPayloadLength);
in.skipBytes(compressedPayloadLength);
} else {
byte[] array = new byte[compressedPayloadLength];
in.readBytes(array);
inflater.setInput(array);
}
while (!inflater.finished()) {
ByteBuf decompressed = ctx.alloc().heapBuffer(1024, 1024);
byte[] outArray = decompressed.array();
int count =
inflater.inflate(outArray, decompressed.arrayOffset(), decompressed.writableBytes());
decompressed.writerIndex(count);
// put data in the pipeline
out.add(decompressed);
}
return true;
}
public static byte[] inflateObject(byte[] compressedData) throws Exception {
// Create the decompressor and give it the data to compress
Inflater decompressor = new Inflater();
decompressor.setInput(compressedData);
// Create an expandable byte array to hold the decompressed data
ByteArrayOutputStream bos = new ByteArrayOutputStream(compressedData.length);
// Decompress the data
byte[] buf = new byte[1024];
while (!decompressor.finished()) {
try {
int count = decompressor.inflate(buf);
bos.write(buf, 0, count);
} catch (DataFormatException e) {
throw e;
} finally {
try {
bos.close();
} catch (IOException ioe) {
}
}
}
// Get the decompressed data
return bos.toByteArray();
}
/**
* Writes an array of bytes to the uncompressed output stream.
*
* @param b buffer containing compressed data to decompress and write to the output stream
* @param off starting offset of the compressed data within {@code b}
* @param len number of bytes to decompress from {@code b}
* @throws IndexOutOfBoundsException if {@code off < 0}, or if {@code len < 0}, or if {@code len >
* b.length - off}
* @throws IOException if an I/O error occurs or this stream is already closed
* @throws NullPointerException if {@code b} is null
* @throws ZipException if a compression (ZIP) format error occurs
*/
public void write(byte[] b, int off, int len) throws IOException {
// Sanity checks
ensureOpen();
if (b == null) {
throw new NullPointerException("Null buffer for read");
} else if (off < 0 || len < 0 || len > b.length - off) {
throw new IndexOutOfBoundsException();
} else if (len == 0) {
return;
}
// Write uncompressed data to the output stream
try {
for (; ; ) {
int n;
// Fill the decompressor buffer with output data
if (inf.needsInput()) {
int part;
if (len < 1) {
break;
}
part = (len < 512 ? len : 512);
inf.setInput(b, off, part);
off += part;
len -= part;
}
// Decompress and write blocks of output data
do {
n = inf.inflate(buf, 0, buf.length);
if (n > 0) {
out.write(buf, 0, n);
}
} while (n > 0);
// Check the decompressor
if (inf.finished()) {
break;
}
if (inf.needsDictionary()) {
throw new ZipException("ZLIB dictionary missing");
}
}
} catch (DataFormatException ex) {
// Improperly formatted compressed (ZIP) data
String msg = ex.getMessage();
if (msg == null) {
msg = "Invalid ZLIB data format";
}
throw new ZipException(msg);
}
}
/** TIFF Adobe ZIP support contributed by Jason Newton. */
public byte[] zipUncompress(byte[] input) {
ByteArrayOutputStream imageBuffer = new ByteArrayOutputStream();
byte[] buffer = new byte[1024];
Inflater decompressor = new Inflater();
decompressor.setInput(input);
try {
while (!decompressor.finished()) {
int rlen = decompressor.inflate(buffer);
imageBuffer.write(buffer, 0, rlen);
}
} catch (DataFormatException e) {
IJ.log(e.toString());
}
decompressor.end();
return imageBuffer.toByteArray();
}
public static byte[] decompress(byte[] compressedData) throws IOException {
Inflater inflater = new Inflater();
inflater.setInput(compressedData);
ByteArrayOutputStream bos = new ByteArrayOutputStream(compressedData.length);
byte[] buf = new byte[1024];
while (!inflater.finished()) {
try {
int count = inflater.inflate(buf);
bos.write(buf, 0, count);
} catch (DataFormatException e) {
}
}
bos.close();
inflater.end();
return bos.toByteArray();
}
/**
* Reads from the compressed stream and stores the resulting uncompressed data into the byte
* array.
*
* @return number of bytes read, or -1 upon EOF
*/
public int read(byte[] b, int off, int len) throws IOException {
if (len <= 0 || off < 0 || off + len > b.length) return 0;
if (_eof) return -1;
// Read from uncompressed stream
if (!_isGzip) return _in.read(b, off, len);
try {
int sublen;
int length = 0;
while (length < len) {
if (_inflater.needsInput()) {
_readBufferSize = _in.read(_readBuffer, 0, _readBuffer.length);
if (_readBufferSize < 0) break;
_inflater.setInput(_readBuffer, 0, _readBufferSize);
}
sublen = _inflater.inflate(b, off + length, len - length);
_crc.update(b, off + length, sublen);
_inputSize += sublen;
_totalInputSize += sublen;
length += sublen;
// Unread gzip trailer and possibly beginning of appended gzip data.
if (_inflater.finished()) {
int remaining = _inflater.getRemaining();
_in.unread(_readBuffer, _readBufferSize - remaining, remaining);
readTrailer();
int secondPart = read(b, off + length, len - length);
return secondPart > 0 ? length + secondPart : length;
}
}
return length;
} catch (DataFormatException e) {
throw new IOException(e.getMessage());
}
}
private static byte[] inflate(byte[] input) throws IOException {
ByteArrayOutputStream bos;
Inflater decompressor = new Inflater();
decompressor.setInput(input, 0, input.length);
bos = new ByteArrayOutputStream(input.length);
byte[] buf = new byte[CHUNKSIZE];
try {
while (!decompressor.finished()) {
int count = decompressor.inflate(buf);
bos.write(buf, 0, count);
}
return bos.toByteArray();
} catch (DataFormatException e) {
throw new IOException("failed to inflate data", e);
}
}
/**
* decompress 0..len in data
*
* @param data
* @param len length of data for decompress in data[]
* @return
* @throws java.util.zip.DataFormatException
*/
public static byte[] defalteDecompress(byte[] data) throws DataFormatException {
ByteArrayOutputStream o = new ByteArrayOutputStream(data.length);
Inflater decompresser = new Inflater();
try {
decompresser.reset();
decompresser.setInput(data, 0, data.length);
byte[] buf = new byte[1024];
while (!decompresser.finished()) {
int i = decompresser.inflate(buf);
o.write(buf, 0, i);
}
return o.toByteArray();
} finally {
decompresser.end();
try {
o.close();
} catch (IOException e) {
}
}
}
/** Decompress the data bytes in the given message (in place). */
private void _decompressMessageData(Message msg) {
if ((msg.flags & Message.FLAGS_COMPRESSED) == 0) {
throw new IllegalArgumentException("message data is not compressed");
}
Inflater decompresser = new Inflater();
decompresser.setInput(msg.data);
ByteArrayOutputStream bos = new ByteArrayOutputStream(msg.data.length);
byte[] buffer = new byte[8192];
try {
while (!decompresser.finished()) {
int size = decompresser.inflate(buffer);
bos.write(buffer, 0, size);
}
msg.data = bos.toByteArray();
msg.flags &= ~Message.FLAGS_COMPRESSED;
decompresser.end();
} catch (DataFormatException e) {
throw new PyroException("invalid compressed data: ", e);
}
}
/**
* Descomprime un certificado contenido en la tarjeta CERES.
*
* @param compressedCertificate Certificado comprimido en ZIP a partir del 9 octeto.
* @return Certificado codificado.
* @throws IOException Cuando se produce un error en la descompresión del certificado.
*/
private static byte[] deflate(final byte[] compressedCertificate) throws IOException {
final ByteArrayOutputStream buffer = new ByteArrayOutputStream();
final Inflater decompressor = new Inflater();
decompressor.setInput(compressedCertificate, 8, compressedCertificate.length - 8);
final byte[] buf = new byte[1024];
try {
// Descomprimimos los datos
while (!decompressor.finished()) {
final int count = decompressor.inflate(buf);
if (count == 0) {
throw new DataFormatException();
}
buffer.write(buf, 0, count);
}
// Obtenemos los datos descomprimidos
return buffer.toByteArray();
} catch (final DataFormatException ex) {
throw new IOException("Error al descomprimir el certificado: " + ex, ex); // $NON-NLS-1$
}
}
/*
* feed inflater more bytes in order to get some
* decompressed output.
* returns number of bytes actually got
*/
private int doRead(byte[] buf, int offset, int len) throws DataFormatException, IOException {
int read = 0;
int n = 0;
byte[] inputBuffer = new byte[len];
while (len > 0) {
n = inflater.inflate(buf, offset, len);
if (n == 0) {
if (inflater.finished()) {
break;
} else if (inflater.needsInput()) {
// feeding
int m = input.read(inputBuffer);
if (m == -1) {
// it shouldn't be here, throw exception
throw new DataFormatException("Input is over while inflater still expecting data");
} else {
// feed the data in
inflater.setInput(inputBuffer, 0, m);
n = inflater.inflate(buf, offset, len);
if (n > 0) {
read += n;
offset += n;
len -= n;
}
}
} else {
// it shouldn't be here, throw
throw new DataFormatException("Inflater is neither finished nor needing input.");
}
} else {
read += n;
offset += n;
len -= n;
}
}
return read;
}
public static byte[] decompress(byte[] data) throws Exception {
if (data.length == 0) return null;
Inflater inf = new Inflater();
inf.setInput(data);
ByteArrayOutputStream baos = new ByteArrayOutputStream(data.length);
byte[] buf = new byte[1024];
while (!inf.finished()) {
int decompressed = inf.inflate(buf);
baos.write(buf, 0, decompressed);
}
inf.end();
baos.close();
return baos.toByteArray();
}
/**
* Decompresses a compressed byte array.
*
* @param input The byte array to be decompressed.
* @return The byte array in its decompressed, readable form.
*/
public static byte[] decompress(byte[] input) {
try {
final Inflater inflater = new Inflater();
final ByteArrayOutputStream byteOutput = new ByteArrayOutputStream(input.length);
final byte[] buffer = new byte[1024];
inflater.setInput(input);
while (!inflater.finished()) {
final int count = inflater.inflate(buffer);
byteOutput.write(buffer, 0, count);
}
byteOutput.close();
return byteOutput.toByteArray();
} catch (final DataFormatException e) {
RadixCore.getInstance().quitWithException("Error decompressing byte array.", e);
return null;
} catch (final IOException e) {
RadixCore.getInstance().quitWithException("Error decompressing byte array.", e);
return null;
}
}
/** Parse out and decompress the data part of a fileblock helper function. */
FileBlock parseData(byte buf[]) throws InvalidProtocolBufferException {
FileBlock out = FileBlock.newInstance(type, indexdata);
Fileformat.Blob blob = Fileformat.Blob.parseFrom(buf);
if (blob.hasRaw()) {
out.data = blob.getRaw();
} else if (blob.hasZlibData()) {
byte buf2[] = new byte[blob.getRawSize()];
Inflater decompresser = new Inflater();
decompresser.setInput(blob.getZlibData().toByteArray());
// decompresser.getRemaining();
try {
decompresser.inflate(buf2);
} catch (DataFormatException e) {
e.printStackTrace();
throw new Error(e);
}
assert (decompresser.finished());
decompresser.end();
out.data = ByteString.copyFrom(buf2);
}
return out;
}
@Override
public void onDataAvailable(DataEmitter emitter, ByteBufferList bb) {
try {
ByteBufferList transformed = new ByteBufferList();
ByteBuffer output = ByteBuffer.allocate(bb.remaining() * 2);
int totalInflated = 0;
int totalRead = 0;
while (bb.size() > 0) {
ByteBuffer b = bb.remove();
if (b.hasRemaining()) {
totalRead = +b.remaining();
mInflater.setInput(b.array(), b.arrayOffset() + b.position(), b.remaining());
do {
int inflated =
mInflater.inflate(
output.array(), output.arrayOffset() + output.position(), output.remaining());
totalInflated += inflated;
output.position(output.position() + inflated);
if (!output.hasRemaining()) {
output.limit(output.position());
output.position(0);
transformed.add(output);
Assert.assertNotSame(totalRead, 0);
int newSize = output.capacity() * 2;
output = ByteBuffer.allocate(newSize);
}
} while (!mInflater.needsInput() && !mInflater.finished());
}
}
output.limit(output.position());
output.position(0);
transformed.add(output);
Util.emitAllData(this, transformed);
} catch (Exception ex) {
report(ex);
}
}
/**
* Returns the non-null InputStream that should be returned to by all requests to {@link
* #getContent()}.
*
* @return a non-null InputStream
* @throws IOException if there was a problem
*/
@Override
InputStream decorate(final InputStream wrapped) throws IOException {
/*
* A zlib stream will have a header.
*
* CMF | FLG [| DICTID ] | ...compressed data | ADLER32 |
*
* * CMF is one byte.
*
* * FLG is one byte.
*
* * DICTID is four bytes, and only present if FLG.FDICT is set.
*
* Sniff the content. Does it look like a zlib stream, with a CMF, etc? c.f. RFC1950,
* section 2.2. http://tools.ietf.org/html/rfc1950#page-4
*
* We need to see if it looks like a proper zlib stream, or whether it is just a deflate
* stream. RFC2616 calls zlib streams deflate. Confusing, isn't it? That's why some servers
* implement deflate Content-Encoding using deflate streams, rather than zlib streams.
*
* We could start looking at the bytes, but to be honest, someone else has already read
* the RFCs and implemented that for us. So we'll just use the JDK libraries and exception
* handling to do this. If that proves slow, then we could potentially change this to check
* the first byte - does it look like a CMF? What about the second byte - does it look like
* a FLG, etc.
*/
/* We read a small buffer to sniff the content. */
final byte[] peeked = new byte[6];
final PushbackInputStream pushback = new PushbackInputStream(wrapped, peeked.length);
final int headerLength = pushback.read(peeked);
if (headerLength == -1) {
throw new IOException("Unable to read the response");
}
/* We try to read the first uncompressed byte. */
final byte[] dummy = new byte[1];
final Inflater inf = new Inflater();
try {
int n;
while ((n = inf.inflate(dummy)) == 0) {
if (inf.finished()) {
/* Not expecting this, so fail loudly. */
throw new IOException("Unable to read the response");
}
if (inf.needsDictionary()) {
/* Need dictionary - then it must be zlib stream with DICTID part? */
break;
}
if (inf.needsInput()) {
inf.setInput(peeked);
}
}
if (n == -1) {
throw new IOException("Unable to read the response");
}
/*
* We read something without a problem, so it's a valid zlib stream. Just need to reset
* and return an unused InputStream now.
*/
pushback.unread(peeked, 0, headerLength);
return new DeflateStream(pushback, new Inflater());
} catch (final DataFormatException e) {
/* Presume that it's an RFC1951 deflate stream rather than RFC1950 zlib stream and try
* again. */
pushback.unread(peeked, 0, headerLength);
return new DeflateStream(pushback, new Inflater(true));
} finally {
inf.end();
}
}
/**
* Look up the byte code definition of the named class.
*
* <p>Created: Mar 30, 2004
*
* @param className
* @return - byte code for the class definition.
*/
private byte[] lookupClassData(String className) {
if (isJar(moduleParentLocator)) {
String fileName;
if (LECCMachineConfiguration.generateBytecode()) {
fileName = className.replace('.', '/') + COMPRESSED_CLASS_FILE_EXTENSION;
} else {
fileName = className.replace('.', '/') + CLASS_FILE_EXTENSION;
}
return loadJarData((ProgramResourceLocator.File) moduleParentLocator, fileName);
} else {
ProgramResourceLocator.File fileLocator;
if (LECCMachineConfiguration.generateBytecode()) {
String extension =
className.substring(className.lastIndexOf('.') + 1)
+ CALClassLoader.COMPRESSED_CLASS_FILE_EXTENSION;
fileLocator = ((ProgramResourceLocator.Folder) moduleParentLocator).extendFile(extension);
} else {
String extension =
className.substring(className.lastIndexOf('.') + 1)
+ CALClassLoader.CLASS_FILE_EXTENSION;
fileLocator = ((ProgramResourceLocator.Folder) moduleParentLocator).extendFile(extension);
}
byte[] fileData = loadFileData(fileLocator);
if (LECCMachineConfiguration.generateBytecode()) {
if (fileData == null) {
return null;
}
// uncompress the data..
inflater.reset();
inflater.setInput(fileData);
// Reusing this baos should be ok, since its only other use is in loadFileData(), which
// we've finished calling.
ByteArrayOutputStream baos = threadLocalByteArrayOutputStream.get();
baos.reset();
try {
// Reusing this bytearray should be ok, since its only other use is in loadFileData(),
// which we've finished calling.
byte[] buf = threadLocalByteArray.get();
while (!inflater.finished()) {
int len = inflater.inflate(buf);
baos.write(buf, 0, len);
}
} catch (DataFormatException e) {
// Can't read the compressed class..
// return null;
throw new IllegalStateException("Can't read compressed class: " + className);
}
return baos.toByteArray();
// Not necessary to close the ByteArrayOutputStream.
} else {
// Source generator.
return fileData;
}
}
}
/**
* {@inheritDoc}
*
* <p>If the decoding did not produce any output, for example because it consumed gzip header or
* trailer bytes, it returns a buffer with zero capacity.
*
* <p>This method never returns null.
*
* <p>The given {@code buffer}'s position will be modified to reflect the bytes consumed during
* the decoding.
*
* <p>The decoding may be finished without consuming the buffer completely if the buffer contains
* gzip bytes plus other bytes (either plain or gzipped).
*/
@Override
public ByteBuffer decode(ByteBuffer buffer) {
try {
while (buffer.hasRemaining()) {
byte currByte = buffer.get();
switch (state) {
case INITIAL:
{
buffer.position(buffer.position() - 1);
state = State.ID;
break;
}
case ID:
{
value += (currByte & 0xFF) << 8 * size;
++size;
if (size == 2) {
if (value != 0x8B1F) throw new ZipException("Invalid gzip bytes");
state = State.CM;
}
break;
}
case CM:
{
if ((currByte & 0xFF) != 0x08)
throw new ZipException("Invalid gzip compression method");
state = State.FLG;
break;
}
case FLG:
{
flags = currByte;
state = State.MTIME;
size = 0;
value = 0;
break;
}
case MTIME:
{
// Skip the 4 MTIME bytes
++size;
if (size == 4) state = State.XFL;
break;
}
case XFL:
{
// Skip XFL
state = State.OS;
break;
}
case OS:
{
// Skip OS
state = State.FLAGS;
break;
}
case FLAGS:
{
buffer.position(buffer.position() - 1);
if ((flags & 0x04) == 0x04) {
state = State.EXTRA_LENGTH;
size = 0;
value = 0;
} else if ((flags & 0x08) == 0x08) state = State.NAME;
else if ((flags & 0x10) == 0x10) state = State.COMMENT;
else if ((flags & 0x2) == 0x2) {
state = State.HCRC;
size = 0;
value = 0;
} else state = State.DATA;
break;
}
case EXTRA_LENGTH:
{
value += (currByte & 0xFF) << 8 * size;
++size;
if (size == 2) state = State.EXTRA;
break;
}
case EXTRA:
{
// Skip EXTRA bytes
--value;
if (value == 0) {
// Clear the EXTRA flag and loop on the flags
flags &= ~0x04;
state = State.FLAGS;
}
break;
}
case NAME:
{
// Skip NAME bytes
if (currByte == 0) {
// Clear the NAME flag and loop on the flags
flags &= ~0x08;
state = State.FLAGS;
}
break;
}
case COMMENT:
{
// Skip COMMENT bytes
if (currByte == 0) {
// Clear the COMMENT flag and loop on the flags
flags &= ~0x10;
state = State.FLAGS;
}
break;
}
case HCRC:
{
// Skip HCRC
++size;
if (size == 2) {
// Clear the HCRC flag and loop on the flags
flags &= ~0x02;
state = State.FLAGS;
}
break;
}
case DATA:
{
buffer.position(buffer.position() - 1);
while (true) {
int decoded = inflate(bytes);
if (decoded == 0) {
if (inflater.needsInput()) {
if (buffer.hasRemaining()) {
byte[] input = new byte[buffer.remaining()];
buffer.get(input);
inflater.setInput(input);
} else {
if (output != null) {
ByteBuffer result = ByteBuffer.wrap(output);
output = null;
return result;
}
break;
}
} else if (inflater.finished()) {
int remaining = inflater.getRemaining();
buffer.position(buffer.limit() - remaining);
state = State.CRC;
size = 0;
value = 0;
break;
} else {
throw new ZipException("Invalid inflater state");
}
} else {
if (output == null) {
// Save the inflated bytes and loop to see if we have finished
output = Arrays.copyOf(bytes, decoded);
} else {
// Accumulate inflated bytes and loop to see if we have finished
byte[] newOutput = Arrays.copyOf(output, output.length + decoded);
System.arraycopy(bytes, 0, newOutput, output.length, decoded);
output = newOutput;
}
}
}
break;
}
case CRC:
{
value += (currByte & 0xFF) << 8 * size;
++size;
if (size == 4) {
// From RFC 1952, compliant decoders need not to verify the CRC
state = State.ISIZE;
size = 0;
value = 0;
}
break;
}
case ISIZE:
{
value += (currByte & 0xFF) << 8 * size;
++size;
if (size == 4) {
if (value != inflater.getBytesWritten())
throw new ZipException("Invalid input size");
ByteBuffer result =
output == null ? BufferUtil.EMPTY_BUFFER : ByteBuffer.wrap(output);
reset();
return result;
}
break;
}
default:
throw new ZipException();
}
}
return BufferUtil.EMPTY_BUFFER;
} catch (ZipException x) {
throw new RuntimeException(x);
}
}
public boolean finished() {
return inflater.finished();
}