예제 #1
0
  private void writeWithHeader(SocketChannel channel, byte[] body) throws IOException {
    ByteBuffer header = ByteBuffer.allocate(4);
    header.putInt(body.length);
    header.flip();
    int len = channel.write(header);
    assert (len == header.capacity());

    channel.write(ByteBuffer.wrap(body));
  }
예제 #2
0
  @Test
  public void testGentleCloseDuringHandshake() throws Exception {
    InetSocketAddress address = startServer(version, null);
    SslContextFactory sslContextFactory = newSslContextFactory();
    sslContextFactory.start();
    SSLEngine sslEngine = sslContextFactory.newSSLEngine(address);
    sslEngine.setUseClientMode(true);
    NextProtoNego.put(
        sslEngine,
        new NextProtoNego.ClientProvider() {
          @Override
          public boolean supports() {
            return true;
          }

          @Override
          public void unsupported() {}

          @Override
          public String selectProtocol(List<String> protocols) {
            return null;
          }
        });
    sslEngine.beginHandshake();

    ByteBuffer encrypted = ByteBuffer.allocate(sslEngine.getSession().getPacketBufferSize());
    sslEngine.wrap(BufferUtil.EMPTY_BUFFER, encrypted);
    encrypted.flip();

    try (SocketChannel channel = SocketChannel.open(address)) {
      // Send ClientHello, immediately followed by TLS Close Alert and then by FIN
      channel.write(encrypted);
      sslEngine.closeOutbound();
      encrypted.clear();
      sslEngine.wrap(BufferUtil.EMPTY_BUFFER, encrypted);
      encrypted.flip();
      channel.write(encrypted);
      channel.shutdownOutput();

      // Read ServerHello from server
      encrypted.clear();
      int read = channel.read(encrypted);
      encrypted.flip();
      Assert.assertTrue(read > 0);
      // Cannot decrypt, as the SSLEngine has been already closed

      // Now if we read more, we should either read the TLS Close Alert, or directly -1
      encrypted.clear();
      read = channel.read(encrypted);
      // Sending a TLS Close Alert during handshake results in an exception when
      // unwrapping that the server react to by closing the connection abruptly.
      Assert.assertTrue(read < 0);
    }
  }
예제 #3
0
  /**
   * Tests a bug in QuorumCnxManager that causes a spin lock when a negative value is sent. This
   * test checks if the connection is being closed upon a message with negative length.
   *
   * @throws Exception
   */
  @Test
  public void testCnxManagerSpinLock() throws Exception {
    QuorumPeer peer =
        new QuorumPeer(peers, peerTmpdir[1], peerTmpdir[1], peerClientPort[1], 3, 1, 1000, 2, 2);
    QuorumCnxManager cnxManager = new QuorumCnxManager(peer);
    QuorumCnxManager.Listener listener = cnxManager.listener;
    if (listener != null) {
      listener.start();
    } else {
      LOG.error("Null listener when initializing cnx manager");
    }

    int port = peers.get(peer.getId()).electionAddr.getPort();
    LOG.info("Election port: " + port);
    InetSocketAddress addr = new InetSocketAddress(port);

    Thread.sleep(1000);

    SocketChannel sc = SocketChannel.open();
    sc.socket().connect(peers.get(new Long(1)).electionAddr, 5000);

    /*
     * Write id first then negative length.
     */
    byte[] msgBytes = new byte[8];
    ByteBuffer msgBuffer = ByteBuffer.wrap(msgBytes);
    msgBuffer.putLong(new Long(2));
    msgBuffer.position(0);
    sc.write(msgBuffer);

    msgBuffer = ByteBuffer.wrap(new byte[4]);
    msgBuffer.putInt(-20);
    msgBuffer.position(0);
    sc.write(msgBuffer);

    Thread.sleep(1000);

    try {
      /*
       * Write a number of times until it
       * detects that the socket is broken.
       */
      for (int i = 0; i < 100; i++) {
        msgBuffer.position(0);
        sc.write(msgBuffer);
      }
      fail("Socket has not been closed");
    } catch (Exception e) {
      LOG.info("Socket has been closed as expected");
    }
    peer.shutdown();
    cnxManager.halt();
  }
 public void sendException(Exception e) {
   SocketChannel channel = this.socket.getChannel();
   if (channel == null || !channel.isOpen()) {
     throw new IllegalStateException("cannot write to channel");
   }
   try {
     if (e instanceof ClientError) {
       channel.write(charsetASCII.encode(Reply.CLIENT_ERROR.toString()));
     } else {
       channel.write(charsetASCII.encode(Reply.ERROR.toString()));
     }
   } catch (IOException ex) {
   }
 }
예제 #5
0
파일: RpcServer.java 프로젝트: alogfans/rpc
  public void writeResponsePacket(SocketChannel socketChannel, ResponsePacket responsePacket) {
    try {
      ByteBuffer byteBuffer;
      byteBuffer = ByteBuffer.allocate(BUFFER_SIZE);

      byte[] marshalObject = MarshalHelper.objectToBytes(responsePacket);
      byte[] marshalHeader = MarshalHelper.int32ToBytes(marshalObject.length);
      byteBuffer.clear();
      byteBuffer.put(marshalHeader);
      byteBuffer.put(marshalObject);
      byteBuffer.flip();

      // If no connection now, please ignore it (usually in async calling)
      try {
        if (socketChannel.isConnected()) {
          socketChannel.write(byteBuffer);
        }
      } catch (IOException e) {
        socketChannel.close();
      }

    } catch (IOException e) {
      e.printStackTrace();
    }
  }
예제 #6
0
  public int write(byte[] buf, int off, int len) throws IOException {
    if (!ready) {
      throw ISEnotusable;
    }
    int pos = 7;
    int current = len;

    // Force a blocking read.
    if (isComplete) {
      while (current > 0) {
        int digit = current % 16;
        current = current / 16;
        chunkLength[pos--] = HexUtils.HEX[digit];
      }

      OutputWriter.flushChannel(socketChannel, ByteBuffer.wrap(chunkLength, pos + 1, 9 - pos));
    }

    int nWrite = socketChannel.write(ByteBuffer.wrap(buf, off, len));
    if (nWrite == len) {
      isComplete = true;
      OutputWriter.flushChannel(socketChannel, ByteBuffer.wrap(chunkLength, 8, 2));
      OutputWriter.flushChannel(socketChannel, end.slice());
    } else {
      isComplete = false;
    }
    return nWrite;
  }
예제 #7
0
  private void write(SelectionKey key) throws IOException {
    SocketChannel ch = (SocketChannel) key.channel();
    int count = 0;

    synchronized (pendingData) {
      List queue = (List) pendingData.get(ch);
      /**
       * Null exception alert: This can happen once a connection was established. Check send() for
       * more information.
       */
      if (queue == null) return;

      while (!queue.isEmpty()) {
        ByteBuffer buf = (ByteBuffer) queue.get(0);
        ch.write(buf);

        count += buf.capacity() - buf.remaining();
        if (buf.remaining() > 0) break;
        queue.remove(0);
      }

      if (queue.isEmpty()) key.interestOps(SelectionKey.OP_READ);
    }

    if (!listener.handleWrite(ch, count)) close(ch);
  }
예제 #8
0
파일: NioNetwork.java 프로젝트: Ziver/zutil
  /** Writes data pending message into a specific socket defined by the key */
  private void write(SelectionKey key) throws IOException {
    SocketChannel socketChannel = (SocketChannel) key.channel();

    synchronized (pendingWriteData) {
      List<ByteBuffer> queue = pendingWriteData.get(socketChannel);
      if (queue == null) {
        queue = new ArrayList<>();
        pendingWriteData.put(socketChannel, queue);
      }

      // Write until there's no more data ...
      while (!queue.isEmpty()) {
        ByteBuffer buf = queue.get(0);
        socketChannel.write(buf);
        if (buf.remaining() > 0) {
          logger.finest("Write Buffer Full!");
          break;
        }
        queue.remove(0);
      }

      if (queue.isEmpty()) {
        // All data written, change selector interest
        logger.finest("No more Data to write!");
        key.interestOps(SelectionKey.OP_READ);
      }
    }
  }
예제 #9
0
 private void processWritableKey(SelectionKey key) {
   CrawlURL url = (CrawlURL) key.attachment();
   SocketChannel channel = (SocketChannel) key.channel();
   ByteBuffer buffer = (ByteBuffer) url.getHandlerAttr(_REQUEST_BUFFER);
   try {
     // 发送http请求,若发送完成,取消OP_WRITE。
     int writtenBytes = 0;
     for (int i = WRITE_SPIN_COUNT; i > 0; i--) {
       writtenBytes = channel.write(buffer);
       // write success
       if (writtenBytes != 0) {
         url.setHandlerAttr(_LAST_SEND_REQUEST_MILLIS, System.currentTimeMillis());
         url.setHandlerAttr(
             _REQUEST_ALREADY_SEND_SIZE,
             (Integer) url.getHandlerAttr(_REQUEST_ALREADY_SEND_SIZE) + writtenBytes);
         url.setHandlerAttr(
             _REQUEST_SEND_TIMES, (Integer) url.getHandlerAttr(_REQUEST_SEND_TIMES) + 1);
         break;
       }
     }
     boolean reqSendFinished = !buffer.hasRemaining();
     url.setHandlerAttr(_REQUEST_SEND_FINISHED, reqSendFinished);
     url.setHandlerAttr(_REQUEST_SEND_FINISHED_MILLIS, reqSendFinished);
     if (reqSendFinished) {
       url.removeHandlerAttr(_REQUEST_BUFFER);
       key.interestOps(key.interestOps() & ~SelectionKey.OP_WRITE);
     }
   } catch (IOException e) {
     logger.error("error send http request ! URL: " + url);
     cancelAndClose(key);
     url.setFetchStatus(FETCH_FAILED);
     url.getPipeline().resume(DefaultPipeline.EMPTY_MSG);
   }
 }
예제 #10
0
  // Called when a peer we're trying to connect to sends us a message
  private void processNewPeer(SocketChannel c) throws IOException {
    ByteBuffer message = ChannelHelper.readBytes(c, 4);
    String recognize = utf8.decode(message).toString();
    if (!recognize.equals("bam!")) {
      // Connected to something that wasn't a BAMPong client...
      c.close();
      Peer p = new_peers.remove(c);
      log("Closing attempt to " + p.getName() + " got " + recognize);
      return;
    }

    // Assemble response
    ByteBuffer name = utf8.encode(nick);
    message = ByteBuffer.allocateDirect(name.limit() + 10); // id(4), port(4), name(2+limit)
    message.putInt(id);
    message.putInt(getPort());
    ChannelHelper.putString(message, name);
    message.flip();

    // Send message
    c.write(message);

    // Move socket to connected peers.
    Peer peer = new_peers.remove(c);
    peers.put(c, peer);
    sockets.put(peer, c);
  }
예제 #11
0
  public boolean transmit(SocketChannel ch) throws IOException {
    if (buf == null) {
      byte[] data = serializeBinary(this);
      int len = data.length;
      buf = ByteBuffer.allocateDirect(len + 4);

      buf.put((byte) ((len >> 24) & 0xFF));
      buf.put((byte) ((len >> 16) & 0xFF));
      buf.put((byte) ((len >> 8) & 0xFF));
      buf.put((byte) ((len) & 0xFF));
      buf.put(data);
      buf.flip();
    }

    if (ch.write(buf) < 0) {
      throw new IOException("Server went down");
    }

    if (buf.hasRemaining()) {
      return false;
    } else {
      buf.flip();
      return true;
    }
  }
예제 #12
0
  private void write(SelectionKey key) throws IOException {
    SocketChannel socketChannel = (SocketChannel) key.channel();

    synchronized (this.pendingData) {
      List queue = (List) this.pendingData.get(socketChannel);

      // Write until there's not more data ...
      while (!queue.isEmpty()) {
        ByteBuffer buf = (ByteBuffer) queue.get(0);
        socketChannel.write(buf);
        if (buf.remaining() > 0) {
          // ... or the socket's buffer fills up
          break;
        }
        queue.remove(0);
      }

      if (queue.isEmpty()) {
        // We wrote away all data, so we're no longer interested
        // in writing on this socket. Switch back to waiting for
        // data.
        key.interestOps(SelectionKey.OP_READ);
      }
    }
  }
  private static void acceptClient(SocketChannel channel) throws IOException {
    buffer.clear();
    buffer.put("you have already connected server!".getBytes());
    buffer.flip();

    channel.write(buffer);
  }
예제 #14
0
 /* (non-Javadoc)
  * @see edu.tsinghua.lumaqq.qq.IPort#send(java.nio.ByteBuffer)
  */
 public void send(ByteBuffer buffer) {
   try {
     channel.write(buffer);
   } catch (IOException e) {
     log.error(e.getMessage());
   }
 }
 public void serve(int port) throws IOException {
   ServerSocketChannel serverChannel = ServerSocketChannel.open();
   serverChannel.configureBlocking(false);
   ServerSocket ss = serverChannel.socket();
   InetSocketAddress address = new InetSocketAddress(port);
   // Binds the server to the selected port
   ss.bind(address);
   // Opens the Selector for handling channels
   Selector selector = Selector.open();
   // Registers the ServerSocket with the Selector to accept connections
   serverChannel.register(selector, SelectionKey.OP_ACCEPT);
   final ByteBuffer msg = ByteBuffer.wrap("Hi!\r\n".getBytes());
   while (true) {
     try {
       // Waits for new events to process; blocks until the next incoming event
       selector.select();
     } catch (IOException e) {
       e.printStackTrace();
       break;
     }
     // Obtains all SelectionKey instances that received events
     Set<SelectionKey> readyKeys = selector.selectedKeys();
     Iterator<SelectionKey> iterator = readyKeys.iterator();
     while (iterator.hasNext()) {
       SelectionKey key = iterator.next();
       iterator.remove();
       try {
         // Checks if the event is a new connection ready to be accepted
         if (key.isAcceptable()) {
           ServerSocketChannel server = (ServerSocketChannel) key.channel();
           SocketChannel client = server.accept();
           client.configureBlocking(false);
           // Accepts client and registers it with the selector
           client.register(
               selector, SelectionKey.OP_WRITE | SelectionKey.OP_READ, msg.duplicate());
           System.out.println("Accepted connection from " + client);
         }
         // Checks if the socket is ready for writing data
         if (key.isWritable()) {
           SocketChannel client = (SocketChannel) key.channel();
           ByteBuffer buffer = (ByteBuffer) key.attachment();
           while (buffer.hasRemaining()) {
             // Writes data to the connected client
             if (client.write(buffer) == 0) {
               break;
             }
           }
           // Closes the connection
           client.close();
         }
       } catch (IOException e) {
         key.cancel();
         try {
           key.channel().close();
         } catch (IOException e1) {
         }
       }
     }
   }
 }
  @Override
  public void writeAfterController(long timestamp) {
    jointCommand.clear();

    jointCommand.putLong(estimatorTicksPerControlTick);
    jointCommand.putLong(timestamp);
    jointCommand.putLong(estimatorFrequencyInHz);

    for (int i = 0; i < joints.size(); i++) {
      OneDoFJoint joint = joints.get(i);

      if (fingerJointMap == null || !fingerJointMap.containsKey(joint.getName())) {
        if (joint.isUnderPositionControl()) jointCommand.putDouble(joint.getqDesired());
        else jointCommand.putDouble(joint.getTau());
      } else
        jointCommand.putDouble(
            fingerJointMap
                .get(joint.getName())
                .getqDesired()); // fingers are always position controlled
    }

    jointCommand.flip();

    try {
      while (jointCommand.hasRemaining()) {
        channel.write(jointCommand);
      }
    } catch (IOException e) {
      e.printStackTrace();
    }
  }
예제 #17
0
  public void send(byte[] d) throws IOException {
    ByteBuffer send = ByteBuffer.allocate(messageSize + 4);
    send.clear();
    if (d.length + send.position() > send.capacity()) {
      out("!!!!!: Cant not send message, message length greater than max buffer size");
      throw new RuntimeException(
          "!!!!!: Cant not send message, message length greater than max buffer size. capacity:"
              + send.capacity()
              + " , position:"
              + send.position()
              + ","
              + " data size:"
              + d.length);
    }
    if (this.pad) {
      send.putInt(d.length);
    }
    send.put(d);
    send.flip();

    while (send.hasRemaining()) // write to channel
    {
      int bw = ssc.write(send);
      // out("bytes written: "+bw + " remaining: "+send.hasRemaining() +"   r:"+send.position()+" v
      // "+send.limit());
    }
  }
예제 #18
0
 /**
  * attempts to send data to the client<br>
  * if all the data has been successfully sent, the ConnectionHandler will automatically switch to
  * read only mode, otherwise it'll stay in it's current mode (which is read / write).
  *
  * @throws IOException if the write operation fails
  * @throws ClosedChannelException if the channel have been closed while registering to the
  *     Selector
  */
 public synchronized void write() {
   if (_outData.size() == 0) {
     // if nothing left in the output string, go back to read mode
     switchToReadOnlyMode();
     return;
   }
   // if there is something to send
   ByteBuffer buf = _outData.remove(0);
   if (buf.remaining() != 0) {
     try {
       _sChannel.write(buf);
     } catch (IOException e) {
       // this should never happen.
       e.printStackTrace();
     }
     // check if the buffer contains more data
     if (buf.remaining() != 0) {
       _outData.add(0, buf);
     }
   }
   // check if the OLD.protocol indicated close.
   if (_protocol.shouldClose()) {
     switchToWriteOnlyMode();
     if (buf.remaining() == 0) {
       closeConnection();
       SocketAddress address = _sChannel.socket().getRemoteSocketAddress();
       logger.info("disconnecting client on " + address);
     }
   }
 }
예제 #19
0
 /**
  * Send the given message to the given client. The message does not need to have the length of the
  * message prepended. It is not guaranteed the message will arrive, as it can't be determined if
  * writing on a closed connection (it could appear to work). This won't be known until later when
  * get a disconnected callback is made.
  *
  * @param channelKey the key of the client to which the message should be sent.
  * @param buffer the message to send.
  */
 public void write(SelectionKey channelKey, byte[] buffer) {
   short len = (short) buffer.length;
   byte[] lengthBytes = messageLength.lengthToBytes(len);
   // copying into byte buffer is actually faster than writing to channel twice over many (>10000)
   // runs
   ByteBuffer writeBuffer = ByteBuffer.allocate(len + lengthBytes.length);
   writeBuffer.put(lengthBytes);
   writeBuffer.put(buffer);
   writeBuffer.flip();
   if (buffer != null && state.get() == State.RUNNING) {
     int bytesWritten;
     try {
       // only 1 thread can write to a channel at a time
       SocketChannel channel = (SocketChannel) channelKey.channel();
       synchronized (channel) {
         bytesWritten = channel.write(writeBuffer);
       }
       if (bytesWritten == -1) {
         resetKey(channelKey);
         disconnected(channelKey);
       }
     } catch (Exception e) {
       resetKey(channelKey);
       disconnected(channelKey);
     }
   }
 }
예제 #20
0
파일: ReadThread.java 프로젝트: ricado/ATM
 public void write(String line, SocketChannel socketChannel) {
   try {
     socketChannel.write(charset.encode(line));
   } catch (Exception e) {
     log.info("error");
   }
 }
예제 #21
0
파일: TCPWrap.java 프로젝트: huntc/trireme
 private void offerWrite(QueuedWrite qw, Context cx) {
   if (writeQueue.isEmpty() && !qw.shutdown) {
     int written;
     try {
       written = clientChannel.write(qw.buf);
     } catch (IOException ioe) {
       // Hacky? We failed the immediate write, but the callback isn't set yet,
       // so go back and do it later
       queueWrite(qw);
       return;
     }
     if (log.isDebugEnabled()) {
       log.debug("Wrote {} to {} from {}", written, clientChannel, qw.buf);
     }
     if (qw.buf.hasRemaining()) {
       // We didn't write the whole thing.
       writeReady = false;
       queueWrite(qw);
     } else if (qw.onComplete != null) {
       qw.onComplete.call(cx, qw.onComplete, this, new Object[] {0, this, qw});
     }
   } else {
     queueWrite(qw);
   }
 }
예제 #22
0
  private void handle(SelectionKey key) throws IOException {
    // TODO Auto-generated method stub

    ServerSocketChannel server = null;
    SocketChannel client = null;
    String receiveText = null;
    int count = 0;

    if (key.isAcceptable()) {
      // client require accept events
      server = (ServerSocketChannel) key.channel();
      client = server.accept();
      client.configureBlocking(false);
      client.register(selector, SelectionKey.OP_READ);
    } else if (key.isReadable()) {
      // 如果是read事件,则直接读取
      client = (SocketChannel) key.channel();
      recBuffer.clear();
      count = client.read(recBuffer);
      if (count > 0) {
        recBuffer.flip();
        receiveText = decode.decode(recBuffer.asReadOnlyBuffer()).toString();
        System.out.println(client.toString() + ":" + receiveText);
        sendBuffer.clear();
        sendBuffer.put((sdf.format(new Date()) + "服务器收到你的消息").getBytes());
        sendBuffer.flip();
        client.write(sendBuffer);
        dispatch(client, receiveText);
        client = (SocketChannel) key.channel();
        client.register(selector, SelectionKey.OP_READ);
      }
    }
  }
예제 #23
0
  public static void main(String[] args) throws IOException {
    SocketChannel socketChannel = SocketChannel.open();

    // 如果设置非阻塞模式,就可以在异步模式下调用connect(), read() 和write()了。可以进一步和Selector配合。之后章节会涉及
    // socketChannel.configureBlocking(false);
    // 这个需要127.0.0.1的9999端口有进程在监听了,之后会将用ServerSocketChannel监听端口,做服务端
    socketChannel.connect(new InetSocketAddress("127.0.0.1", 9999));
    ByteBuffer buf = ByteBuffer.allocate(48);

    // 剩下的读写都可以参考fileChannel

    // 非阻塞模式时候可以如下等待
    // while(! socketChannel.finishConnect() ){
    // wait, or do something else...
    // }

    // 读取数据
    //		int bytesRead = socketChannel.read(buf);
    //		System.out.println(bytesRead);

    // 写入数据
    String newData = "New String to write to file..." + System.currentTimeMillis();
    buf.clear();
    buf.put(newData.getBytes());
    buf.flip();
    System.out.println("Start send message");
    while (buf.hasRemaining()) {
      socketChannel.write(buf);
    }
    System.out.println("Finish send");
  }
예제 #24
0
  /**
   * Writes bytes to the socket.
   *
   * @param buf byte buffer containing the bytes
   * @param offset offset into the buffer
   * @param length number of bytes to read
   * @param isEnd if the write is at a close.
   * @exception throws ClientDisconnectException if the connection is dropped
   */
  @Override
  public void write(byte[] buf, int offset, int length, boolean isEnd) throws IOException {
    if (_s == null) {
      return;
    }

    try {
      _needsFlush = true;

      while (length > 0) {
        _writeBuffer.clear();
        int sublen = Math.min(length, _writeBuffer.remaining());

        _writeBuffer.put(buf, offset, sublen);
        _writeBuffer.flip();

        _s.write(_writeBuffer);

        length -= sublen;
        offset += sublen;
      }

      _totalWriteBytes += length;
    } catch (IOException e) {
      IOException exn = ClientDisconnectException.create(this + ":" + e, e);

      try {
        close();
      } catch (IOException e1) {
      }

      throw exn;
    }
  }
예제 #25
0
파일: ModeX.java 프로젝트: sureddy/dcache
 @Override
 public void write(Multiplexer multiplexer, SelectionKey key) throws Exception {
   try {
     _socket.write(_command);
     if (_command.position() == _command.limit()) {
       if (_state == ReceiverState.SEND_BYE) {
         close(multiplexer, key, true); // TODO: Check true
       } else {
         key.interestOps(SelectionKey.OP_READ);
       }
     }
   } catch (ClosedChannelException e) {
     /* From GridFTP v2 spec: "...the sender may choose not
      * to wait for 'BYE' acknowledgement. The sender is
      * allowed to close data channels immediately after
      * sending EOD, and the receiver may get a socket
      * error trying to send 'BYE' message back to the
      * sender".
      */
     if (_state == ReceiverState.SEND_BYE) {
       close(multiplexer, key, true); // TODO: Check true
     } else {
       throw e;
     }
   }
 }
예제 #26
0
  protected void writeBuffer(SocketChannel channel) throws IOException {
    synchronized (this.writeQueue) {
      ByteBuffer buffer = this.writeQueue.peek();
      while (buffer != null) {
        writeSize += channel.write(buffer);
        if (buffer.hasRemaining()) {
          this.selectionKey.interestOps(selectionKey.interestOps() | SelectionKey.OP_WRITE);
          this.selectionKey.selector().wakeup();
          break;
        } else {
          this.writeQueue.remove();
          buffer = this.writeQueue.peek();
        }
      }
      this.writeQueue.notifyAll();
    }

    if (System.currentTimeMillis() - this.lastWriteTime > 1000) {
      writeSpeed = this.writeSize * 1.0 / (System.currentTimeMillis() - this.lastWriteTime);
      this.writeSize = 0;
      this.lastWriteTime = System.currentTimeMillis();

      if (log.isDebugEnabled()) {
        log.debug(
            String.format(
                "Write speed %1.3f Kb/s on %s.", this.writeSpeed, this.listener.toString()));
        if (this.writeQueue.size() > 0) {
          log.warn(
              String.format(
                  "Write buffer queue size:%s, on %s",
                  this.writeQueue.size(), this.listener.toString()));
        }
      }
    }
  }
예제 #27
0
 void send(byte[] data) throws IOException {
   SocketChannel channel = (SocketChannel) key.channel();
   verboseLog("TCP write", data);
   byte[] lengthArray = new byte[2];
   lengthArray[0] = (byte) (data.length >>> 8);
   lengthArray[1] = (byte) (data.length & 0xFF);
   ByteBuffer[] buffers = new ByteBuffer[2];
   buffers[0] = ByteBuffer.wrap(lengthArray);
   buffers[1] = ByteBuffer.wrap(data);
   int nsent = 0;
   key.interestOps(SelectionKey.OP_WRITE);
   try {
     while (nsent < data.length + 2) {
       if (key.isWritable()) {
         long n = channel.write(buffers);
         if (n < 0) throw new EOFException();
         nsent += (int) n;
         if (nsent < data.length + 2 && System.currentTimeMillis() > endTime)
           throw new SocketTimeoutException();
       } else blockUntil(key, endTime);
     }
   } finally {
     if (key.isValid()) key.interestOps(0);
   }
 }
예제 #28
0
    /**
     * writes the contents of the buffer to the socket
     *
     * @param socketChannel the socket to publish the buffer to
     * @param approxTime an approximation of the current time in millis
     * @throws IOException
     */
    private int writeBufferToSocket(
        @NotNull final SocketChannel socketChannel, final long approxTime) throws IOException {

      if (in.position() == 0) return 0;

      // if we still have some unwritten writer from last time
      lastSentTime = approxTime;
      out.limit((int) in.position());

      final int len = socketChannel.write(out);

      if (LOG.isDebugEnabled()) LOG.debug("bytes-written=" + len);

      if (out.remaining() == 0) {
        out.clear();
        in.clear();
      } else {
        out.compact();
        in.position(out.position());
        in.limit(in.capacity());
        out.clear();
      }

      return len;
    }
예제 #29
0
 /**
  * ������ѯ�ķ�ʽ����selector���Ƿ�����Ҫ������¼�������У�����д���
  *
  * @throws IOException
  */
 public void listen() {
   // ��ѯ����selector
   while (true) {
     int readyChannels = 0;
     try {
       readyChannels = selector.select();
       if (readyChannels == 0) {
         continue;
       }
     } catch (IOException e) {
       // TODO Auto-generated catch block
       e.printStackTrace();
       if (selector != null) {
         try {
           selector.close();
         } catch (IOException e1) {
           // TODO Auto-generated catch block
           e1.printStackTrace();
         }
       }
     }
     // ���selector��ѡ�е���ĵ����
     Iterator ite = this.selector.selectedKeys().iterator();
     while (ite.hasNext()) {
       SelectionKey key = (SelectionKey) ite.next();
       // ɾ����ѡ��key,�Է��ظ�����
       ite.remove();
       // �����¼�����
       if (key.isValid() && key.isConnectable()) {
         SocketChannel channel = (SocketChannel) key.channel();
         // ����������ӣ����������
         if (channel.isConnectionPending()) {
           try {
             channel.finishConnect();
             // ���óɷ�����
             channel.configureBlocking(false);
             // ��������Ը����˷�����ϢŶ
             channel.write(ByteBuffer.wrap(new String("�����˷�����һ����Ϣ").getBytes()));
             // �ںͷ�������ӳɹ�֮��Ϊ�˿��Խ��յ�����˵���Ϣ����Ҫ��ͨ�����ö���Ȩ�ޡ�
             channel.register(this.selector, SelectionKey.OP_READ);
           } catch (IOException e) {
             // TODO Auto-generated catch block
             e.printStackTrace();
             if (channel != null) {
               try {
                 channel.close();
               } catch (IOException e1) {
                 // TODO Auto-generated catch block
                 e1.printStackTrace();
               }
             }
           }
         }
       } else if (key.isReadable()) { // ����˿ɶ����¼�
         read(key);
       }
     }
   }
 }
예제 #30
0
파일: ReadThread.java 프로젝트: ricado/ATM
 /**
  * 将字符串写入
  *
  * @param line
  */
 public void write(String line) {
   try {
     SocketChannel sk = (SocketChannel) selectionKey.channel();
     sk.write(charset.encode(line));
   } catch (Exception e) {
     log.info("error");
   }
 }