예제 #1
0
  /**
   * there is a socket listening on the port for this packet. process if it is a new connection rdp
   * packet
   */
  public void processNewConnection(RDPServerSocket serverSocket, RDPPacket packet) {
    if (Log.loggingNet)
      Log.net(
          "processNewConnection: RDPPACKET (localport=" + serverSocket.getPort() + "): " + packet);

    //        int localPort = serverSocket.getPort();
    InetAddress remoteAddr = packet.getInetAddress();
    int remotePort = packet.getPort();
    if (!packet.isSyn()) {
      // the client is not attemping to start a new connection
      // send a reset and forget about it
      Log.debug("socket got non-syn packet, replying with reset: packet=" + packet);
      RDPPacket rstPacket = RDPPacket.makeRstPacket();
      rstPacket.setPort(remotePort);
      rstPacket.setInetAddress(remoteAddr);
      RDPServer.sendPacket(serverSocket.getDatagramChannel(), rstPacket);
      return;
    }

    // it is a syn packet, lets make a new connection for it
    RDPConnection con = new RDPConnection();
    DatagramChannel dc = serverSocket.getDatagramChannel();
    con.initConnection(dc, packet);

    // add new connection to allConnectionMap
    registerConnection(con, dc);

    // ack it with a syn
    RDPPacket synPacket = RDPPacket.makeSynPacket(con);
    con.sendPacketImmediate(synPacket, false);
  }
예제 #2
0
  /**
   * we have a packet that belongs to the passed in connection. process the packet for the
   * connection. It returns true if the connection is open and the packet was a data packet
   */
  boolean processExistingConnection(RDPConnection con, RDPPacket packet) {

    if (Log.loggingNet)
      Log.net("RDPServer.processExistingConnection: con state=" + con + ", packet=" + packet);
    packetCounter.add();

    int state = con.getState();
    if (state == RDPConnection.LISTEN) {
      // something is wrong, we shouldn't be here
      // we get to this method after looking in the connections map
      // but all LISTEN connections should be listed direct
      // from serversockets
      Log.error("RDPServer.processExistingConnection: connection shouldnt be in LISTEN state");
      return false;
    }
    if (state == RDPConnection.SYN_SENT) {
      if (!packet.isAck()) {
        Log.warn("got a non-ack packet when we're in SYN_SENT");
        return false;
      }
      if (!packet.isSyn()) {
        Log.warn("got a non-syn packet when we're in SYN_SENT");
        return false;
      }
      if (Log.loggingNet) Log.net("good: got syn-ack packet in syn_sent");

      // make sure its acking our initial segment #
      if (packet.getAckNum() != con.getInitialSendSeqNum()) {
        if (Log.loggingNet) Log.net("syn's ack number does not match initial seq #");
        return false;
      }

      con.setRcvCur(packet.getSeqNum());
      con.setRcvIrs(packet.getSeqNum());
      con.setMaxSendUnacks(packet.getSendUnacks());
      con.setMaxReceiveSegmentSize(packet.getMaxRcvSegmentSize());
      con.setSendUnackd(packet.getAckNum() + 1);

      // ack first before setting state to open
      // otherwise some other thread will get woken up and send data
      // before we send the ack
      if (Log.loggingNet) Log.net("new connection state: " + con);
      RDPPacket replyPacket = new RDPPacket(con);
      con.sendPacketImmediate(replyPacket, false);
      con.setState(RDPConnection.OPEN);
      return false;
    }
    if (state == RDPConnection.SYN_RCVD) {
      if (packet.getSeqNum() <= con.getRcvIrs()) {
        Log.error("seqnum is not above rcv initial seq num");
        return false;
      }
      if (packet.getSeqNum() > (con.getRcvCur() + (con.getRcvMax() * 2))) {
        Log.error("seqnum is too big");
        return false;
      }
      if (packet.isAck()) {
        if (packet.getAckNum() == con.getInitialSendSeqNum()) {
          if (Log.loggingNet) Log.net("got ack for our syn - setting state to open");
          con.setState(RDPConnection.OPEN); // this will notify()

          // call the accept callback
          // first find the serversocket
          DatagramChannel dc = con.getDatagramChannel();
          if (dc == null) {
            throw new MVRuntimeException(
                "RDPServer.processExistingConnection: no datagramchannel for connection that just turned OPEN");
          }
          RDPServerSocket rdpSocket = RDPServer.getRDPSocket(dc);
          if (rdpSocket == null) {
            throw new MVRuntimeException(
                "RDPServer.processExistingConnection: no socket for connection that just turned OPEN");
          }
          ClientConnection.AcceptCallback acceptCB = rdpSocket.getAcceptCallback();
          if (acceptCB != null) {
            acceptCB.acceptConnection(con);
          } else {
            Log.warn("serversocket has no accept callback");
          }
          if (Log.loggingNet)
            Log.net(
                "RDPServer.processExistingConnection: got ACK, removing from unack list: "
                    + packet.getSeqNum());
          con.removeUnackPacket(packet.getSeqNum());
        }
      }
    }
    if (state == RDPConnection.CLOSE_WAIT) {
      // reply with a reset on all packets
      if (!packet.isRst()) {
        RDPPacket rstPacket = RDPPacket.makeRstPacket();
        con.sendPacketImmediate(rstPacket, false);
      }
    }
    if (state == RDPConnection.OPEN) {
      if (packet.isRst()) {
        // the other side wants to close the connection
        // set the state,
        // dont call con.close() since that will send a reset packet
        if (Log.loggingDebug)
          Log.debug("RDPServer.processExistingConnection: got reset packet for con " + con);
        if (con.getState() != RDPConnection.CLOSE_WAIT) {
          con.setState(RDPConnection.CLOSE_WAIT);
          con.setCloseWaitTimer();
          // Only invoke callback when moving into CLOSE_WAIT
          // state.  This prevents two calls to connectionReset.
          Log.net("RDPServer.processExistingConnection: calling reset callback");
          ClientConnection.MessageCallback pcb = con.getCallback();
          pcb.connectionReset(con);
        }

        return false;
      }
      if (packet.isSyn()) {
        // this will close the connection (put into CLOSE_WAIT)
        // send a reset packet and call the connectionReset callback
        Log.error(
            "RDPServer.processExistingConnection: closing connection because we got a syn packet, con="
                + con);
        con.close();
        return false;
      }

      // TODO: shouldnt it be ok for it to have same seq num?
      // if it is a 0 data packet?
      long rcvCur = con.getRcvCur();
      if (packet.getSeqNum() <= rcvCur) {
        if (Log.loggingNet)
          Log.net("RDPServer.processExistingConnection: seqnum too small - acking/not process");
        if (packet.getData() != null) {
          if (Log.loggingNet)
            Log.net(
                "RDPServer.processExistingConnection: sending ack even though seqnum out of range");
          RDPPacket replyPacket = new RDPPacket(con);
          con.sendPacketImmediate(replyPacket, false);
        }
        return false;
      }
      if (packet.getSeqNum() > (rcvCur + (con.getRcvMax() * 2))) {
        Log.error("RDPServer.processExistingConnection: seqnum too big - discarding");
        return false;
      }
      if (packet.isAck()) {
        if (Log.loggingNet)
          Log.net("RDPServer.processExistingConnection: processing ack " + packet.getAckNum());
        // lock for race condition (read then set)
        con.getLock().lock();
        try {
          if (packet.getAckNum() >= con.getSendNextSeqNum()) {
            // acking something we didnt even send yet
            Log.error(
                "RDPServer.processExistingConnection: discarding -- got ack #"
                    + packet.getAckNum()
                    + ", but our next send seqnum is "
                    + con.getSendNextSeqNum()
                    + " -- "
                    + con);
            return false;
          }
          if (con.getSendUnackd() <= packet.getAckNum()) {
            con.setSendUnackd(packet.getAckNum() + 1);
            if (Log.loggingNet)
              Log.net(
                  "RDPServer.processExistingConnection: updated send_unackd num to "
                      + con.getSendUnackd()
                      + " (one greater than packet ack) - "
                      + con);
            con.removeUnackPacketUpTo(packet.getAckNum());
          }
          if (packet.isEak()) {
            List eackList = packet.getEackList();
            Iterator iter = eackList.iterator();
            while (iter.hasNext()) {
              Long seqNum = (Long) iter.next();
              if (Log.loggingNet)
                Log.net("RDPServer.processExistingConnection: got EACK: " + seqNum);
              con.removeUnackPacket(seqNum.longValue());
            }
          }
        } finally {
          con.getLock().unlock();
          if (Log.loggingNet)
            Log.net("RDPServer.processExistingConnection: processed ack " + packet.getAckNum());
        }
      }
      // process the data
      byte[] data = packet.getData();
      if ((data != null) || packet.isNul()) {
        dataCounter.add();

        // lock - since racecondition: we read then set
        con.getLock().lock();
        try {
          rcvCur = con.getRcvCur(); // update rcvCur
          if (Log.loggingNet) Log.net("RDPServer.processExistingConnection: rcvcur is " + rcvCur);

          ClientConnection.MessageCallback pcb = con.getCallback();
          if (pcb == null) {
            Log.warn("RDPServer.processExistingConnection: no packet callback registered");
          }

          // call callback only if we havent seen it already - eackd
          if (!con.hasEack(packet.getSeqNum())) {
            if (con.isSequenced()) {
              // this is a sequential connection,
              // make sure this is the 'next' packet
              // is this the next sequential packet
              if (packet.getSeqNum() == (rcvCur + 1)) {
                // this is the next packet
                if (Log.loggingNet)
                  Log.net(
                      "RDPServer.processExistingConnection: conn is sequenced and received next packet, rcvCur="
                          + rcvCur
                          + ", packet="
                          + packet);
                if ((pcb != null) && (data != null)) {
                  queueForCallbackProcessing(pcb, con, packet);
                }
              } else {
                // not the next packet, place it in queue
                if (Log.loggingNet)
                  Log.net(
                      "RDPServer.processExistingConnection: conn is sequenced, BUT PACKET is OUT OF ORDER: rcvcur="
                          + rcvCur
                          + ", packet="
                          + packet);
                con.addSequencePacket(packet);
              }
            } else {
              if ((pcb != null) && (data != null)) {
                // make sure we havent already processed packet
                queueForCallbackProcessing(pcb, con, packet);
              }
            }
          } else {
            if (Log.loggingNet) Log.net(con.toString() + " already seen this packet");
          }

          // is this the next sequential packet
          if (packet.getSeqNum() == (rcvCur + 1)) {
            con.setRcvCur(rcvCur + 1);
            if (Log.loggingNet)
              Log.net(
                  "RDPServer.processExistingConnection RCVD: incremented last sequenced rcvd: "
                      + (rcvCur + 1));

            // packet in order - dont add to eack
            // Take any additional sequential packets off eack
            long seqNum = rcvCur + 2;
            while (con.removeEack(seqNum)) {
              if (Log.loggingNet)
                Log.net("RDPServer.processExistingConnection: removing/collapsing eack: " + seqNum);
              con.setRcvCur(seqNum++);
            }

            if (con.isSequenced()) {
              rcvCur++; // since we just process the last one
              Log.net(
                  "RDPServer.processExistingConnection: connection is sequenced, processing collapsed packets.");
              // send any saved sequential packets also
              Iterator iter = con.getSequencePackets().iterator();
              while (iter.hasNext()) {
                RDPPacket p = (RDPPacket) iter.next();
                if (Log.loggingNet)
                  Log.net(
                      "rdpserver: stored packet seqnum="
                          + p.getSeqNum()
                          + ", if equal to (rcvcur + 1)="
                          + (rcvCur + 1));
                if (p.getSeqNum() == (rcvCur + 1)) {
                  Log.net(
                      "RDPServer.processExistingConnection: this is the next packet, processing");
                  // this is the next packet - update rcvcur
                  rcvCur++;

                  // process this packet
                  Log.net(
                      "RDPServer.processExistingConnection: processing stored sequential packet "
                          + p);
                  byte[] storedData = p.getData();
                  if (pcb != null && storedData != null) {
                    queueForCallbackProcessing(pcb, con, packet);
                  }
                  iter.remove();
                }
              }
            } else {
              if (Log.loggingNet)
                Log.net("RDPServer.processExistingConnection: connection is not sequenced");
            }
          } else {
            if (Log.loggingNet)
              Log.net(
                  "RDPServer.processExistingConnection: RCVD OUT OF ORDER: packet seq#: "
                      + packet.getSeqNum()
                      + ", but last sequential rcvd packet was: "
                      + con.getRcvCur()
                      + " -- not incrementing counter");
            if (packet.getSeqNum() > rcvCur) {
              // must be at least + 2 larger than rcvCur
              if (Log.loggingNet) Log.net("adding to eack list " + packet);
              con.addEack(packet);
            }
          }
        } finally {
          con.getLock().unlock();
        }
        return true;
      }
    }
    return false;
  }