private void adjustDateLineCrossingPoints() {
      ArrayList<LatLon> corners = new ArrayList<LatLon>(Arrays.asList(sw, se, nw, ne));
      if (!LatLon.locationsCrossDateLine(corners)) return;

      double lonSign = 0;
      for (LatLon corner : corners) {
        if (Math.abs(corner.getLongitude().degrees) != 180)
          lonSign = Math.signum(corner.getLongitude().degrees);
      }

      if (lonSign == 0) return;

      if (Math.abs(sw.getLongitude().degrees) == 180
          && Math.signum(sw.getLongitude().degrees) != lonSign)
        sw = new Position(sw.getLatitude(), sw.getLongitude().multiply(-1), sw.getElevation());
      if (Math.abs(se.getLongitude().degrees) == 180
          && Math.signum(se.getLongitude().degrees) != lonSign)
        se = new Position(se.getLatitude(), se.getLongitude().multiply(-1), se.getElevation());
      if (Math.abs(nw.getLongitude().degrees) == 180
          && Math.signum(nw.getLongitude().degrees) != lonSign)
        nw = new Position(nw.getLatitude(), nw.getLongitude().multiply(-1), nw.getElevation());
      if (Math.abs(ne.getLongitude().degrees) == 180
          && Math.signum(ne.getLongitude().degrees) != lonSign)
        ne = new Position(ne.getLatitude(), ne.getLongitude().multiply(-1), ne.getElevation());
    }
예제 #2
0
  protected void movePolygon(Point previousMousePoint, Point mousePoint) {
    // Intersect a ray through each mouse point, with a geoid passing through the reference
    // elevation.
    // If either ray fails to intersect the geoid, then ignore this event. Use the difference
    // between the two
    // intersected positions to move the control point's location.

    View view = this.wwd.getView();
    Globe globe = this.wwd.getModel().getGlobe();

    Position refPos = this.polygon.getReferencePosition();
    if (refPos == null) return;

    Line ray = view.computeRayFromScreenPoint(mousePoint.getX(), mousePoint.getY());
    Line previousRay =
        view.computeRayFromScreenPoint(previousMousePoint.getX(), previousMousePoint.getY());

    Vec4 vec = AirspaceEditorUtil.intersectGlobeAt(this.wwd, refPos.getElevation(), ray);
    Vec4 previousVec =
        AirspaceEditorUtil.intersectGlobeAt(this.wwd, refPos.getElevation(), previousRay);

    if (vec == null || previousVec == null) {
      return;
    }

    Position pos = globe.computePositionFromPoint(vec);
    Position previousPos = globe.computePositionFromPoint(previousVec);
    LatLon change = pos.subtract(previousPos);

    this.polygon.move(new Position(change.getLatitude(), change.getLongitude(), 0.0));
  }
  /**
   * Select the visible grid elements
   *
   * @param dc the current <code>DrawContext</code>.
   */
  protected void selectRenderables(DrawContext dc) {
    if (dc == null) {
      String message = Logging.getMessage("nullValue.DrawContextIsNull");
      Logging.logger().severe(message);
      throw new IllegalArgumentException(message);
    }
    Sector vs = dc.getVisibleSector();
    OrbitView view = (OrbitView) dc.getView();
    // Compute labels offset from view center
    Position centerPos = view.getCenterPosition();
    Double pixelSizeDegrees =
        Angle.fromRadians(
                view.computePixelSizeAtDistance(view.getZoom())
                    / dc.getGlobe().getEquatorialRadius())
            .degrees;
    Double labelOffsetDegrees = pixelSizeDegrees * view.getViewport().getWidth() / 4;
    Position labelPos =
        Position.fromDegrees(
            centerPos.getLatitude().degrees - labelOffsetDegrees,
            centerPos.getLongitude().degrees - labelOffsetDegrees,
            0);
    Double labelLatDegrees = labelPos.getLatitude().normalizedLatitude().degrees;
    labelLatDegrees = Math.min(Math.max(labelLatDegrees, -76), 78);
    labelPos =
        new Position(
            Angle.fromDegrees(labelLatDegrees), labelPos.getLongitude().normalizedLongitude(), 0);

    if (vs != null) {
      for (GridElement ge : this.gridElements) {
        if (ge.isInView(dc)) {
          if (ge.renderable instanceof GeographicText) {
            GeographicText gt = (GeographicText) ge.renderable;
            if (labelPos.getLatitude().degrees < 72
                || "*32*34*36*".indexOf("*" + gt.getText() + "*") == -1) {
              // Adjust label position according to eye position
              Position pos = gt.getPosition();
              if (ge.type.equals(GridElement.TYPE_LATITUDE_LABEL))
                pos =
                    Position.fromDegrees(
                        pos.getLatitude().degrees,
                        labelPos.getLongitude().degrees,
                        pos.getElevation());
              else if (ge.type.equals(GridElement.TYPE_LONGITUDE_LABEL))
                pos =
                    Position.fromDegrees(
                        labelPos.getLatitude().degrees,
                        pos.getLongitude().degrees,
                        pos.getElevation());

              gt.setPosition(pos);
            }
          }

          this.graticuleSupport.addRenderable(ge.renderable, GRATICULE_UTM);
        }
      }
      // System.out.println("Total elements: " + count + " visible sector: " + vs);
    }
  }
예제 #4
0
  protected void dragWholeShape(DragSelectEvent dragEvent, Movable dragObject) {
    View view = getWwd().getView();
    EllipsoidalGlobe globe = (EllipsoidalGlobe) getWwd().getModel().getGlobe();

    // Compute ref-point position in screen coordinates.
    Position refPos = dragObject.getReferencePosition();
    if (refPos == null) return;

    Vec4 refPoint = globe.computePointFromPosition(refPos);
    Vec4 screenRefPoint = view.project(refPoint);

    // Compute screen-coord delta since last event.
    int dx = dragEvent.getPickPoint().x - dragEvent.getPreviousPickPoint().x;
    int dy = dragEvent.getPickPoint().y - dragEvent.getPreviousPickPoint().y;

    // Find intersection of screen coord ref-point with globe.
    double x = screenRefPoint.x + dx;
    double y =
        dragEvent.getMouseEvent().getComponent().getSize().height - screenRefPoint.y + dy - 1;
    Line ray = view.computeRayFromScreenPoint(x, y);
    Intersection inters[] = globe.intersect(ray, refPos.getElevation());

    if (inters != null) {
      // Intersection with globe. Move reference point to the intersection point.
      Position p = globe.computePositionFromPoint(inters[0].getIntersectionPoint());
      dragObject.moveTo(p);
    }
  }
예제 #5
0
  protected void setPolygonHeight(Point previousMousePoint, Point mousePoint) {
    // Find the closest points between the rays through each screen point, and the ray from the
    // control point
    // and in the direction of the globe's surface normal. Compute the elevation difference between
    // these two
    // points, and use that as the change in polygon height.

    Position referencePos = this.polygon.getReferencePosition();
    if (referencePos == null) return;

    Vec4 referencePoint = this.wwd.getModel().getGlobe().computePointFromPosition(referencePos);

    Vec4 surfaceNormal =
        this.wwd
            .getModel()
            .getGlobe()
            .computeSurfaceNormalAtLocation(
                referencePos.getLatitude(), referencePos.getLongitude());
    Line verticalRay = new Line(referencePoint, surfaceNormal);
    Line screenRay =
        this.wwd.getView().computeRayFromScreenPoint(mousePoint.getX(), mousePoint.getY());
    Line previousScreenRay =
        this.wwd
            .getView()
            .computeRayFromScreenPoint(previousMousePoint.getX(), previousMousePoint.getY());

    Vec4 pointOnLine = AirspaceEditorUtil.nearestPointOnLine(verticalRay, screenRay);
    Vec4 previousPointOnLine =
        AirspaceEditorUtil.nearestPointOnLine(verticalRay, previousScreenRay);

    Position pos = this.wwd.getModel().getGlobe().computePositionFromPoint(pointOnLine);
    Position previousPos =
        this.wwd.getModel().getGlobe().computePositionFromPoint(previousPointOnLine);
    double elevationChange = pos.getElevation() - previousPos.getElevation();

    java.util.List<Position> boundary = new ArrayList<Position>();
    for (LatLon ll : this.polygon.getOuterBoundary()) {
      boundary.add(new Position(ll, ((Position) ll).getElevation() + elevationChange));
    }

    this.polygon.setOuterBoundary(boundary);
  }
  protected static boolean isNameVisible(
      DrawContext dc, PlaceNameService service, Position namePosition) {
    double elevation = dc.getVerticalExaggeration() * namePosition.getElevation();
    Vec4 namePoint =
        dc.getGlobe()
            .computePointFromPosition(
                namePosition.getLatitude(), namePosition.getLongitude(), elevation);
    Vec4 eyeVec = dc.getView().getEyePoint();

    double dist = eyeVec.distanceTo3(namePoint);
    return dist >= service.getMinDisplayDistance() && dist <= service.getMaxDisplayDistance();
  }
예제 #7
0
  protected void moveControlPoint(
      ControlPointMarker controlPoint, Point lastMousePoint, Point moveToPoint) {
    View view = this.wwd.getView();
    Globe globe = this.wwd.getModel().getGlobe();

    Position refPos = controlPoint.getPosition();
    if (refPos == null) return;

    Line ray = view.computeRayFromScreenPoint(moveToPoint.getX(), moveToPoint.getY());
    Line previousRay = view.computeRayFromScreenPoint(lastMousePoint.getX(), lastMousePoint.getY());

    Vec4 vec = AirspaceEditorUtil.intersectGlobeAt(this.wwd, refPos.getElevation(), ray);
    Vec4 previousVec =
        AirspaceEditorUtil.intersectGlobeAt(this.wwd, refPos.getElevation(), previousRay);

    if (vec == null || previousVec == null) {
      return;
    }

    Position pos = globe.computePositionFromPoint(vec);
    Position previousPos = globe.computePositionFromPoint(previousVec);
    LatLon change = pos.subtract(previousPos);

    java.util.List<LatLon> boundary = new ArrayList<LatLon>();
    for (LatLon ll : this.polygon.getOuterBoundary()) {
      boundary.add(ll);
    }

    boundary.set(controlPoint.getIndex(), new Position(pos.add(change), refPos.getAltitude()));

    // ExtrudedPolygon ensures that the last boundary position is the same as the first. Remove the
    // last point
    // before setting the boundary.
    boundary.remove(boundary.size() - 1);

    this.polygon.setOuterBoundary(boundary);
  }
예제 #8
0
 /**
  * Compute the view range footprint on the globe.
  *
  * @param dc the current <code>DrawContext</code>
  * @param steps the number of steps.
  * @return an array list of <code>LatLon</code> forming a closed shape.
  */
 protected ArrayList<LatLon> computeViewFootPrint(DrawContext dc, int steps) {
   ArrayList<LatLon> positions = new ArrayList<LatLon>();
   Position eyePos = dc.getView().getEyePosition();
   Angle distance =
       Angle.fromRadians(
           Math.asin(
               dc.getView().getFarClipDistance()
                   / (dc.getGlobe().getRadius() + eyePos.getElevation())));
   if (distance.degrees > 10) {
     double headStep = 360d / steps;
     Angle heading = Angle.ZERO;
     for (int i = 0; i <= steps; i++) {
       LatLon p = LatLon.greatCircleEndPosition(eyePos, heading, distance);
       positions.add(p);
       heading = heading.addDegrees(headStep);
     }
     return positions;
   } else return null;
 }