예제 #1
0
  /** Force all meters in active circuit to sample. */
  @Override
  public void sampleAll() {
    Circuit ckt = DSS.activeCircuit;

    for (EnergyMeterObj meter : ckt.getEnergyMeters()) if (meter.isEnabled()) meter.takeSample();

    systemMeter.takeSample();

    if (saveDemandInterval) {
        /* Write totals demand interval file */
      PrintWriter pw = new PrintWriter(DI_Totals);

      pw.printf("%-.6g ", ckt.getSolution().getDblHour());
      for (int i = 0; i < NUM_EM_REGISTERS; i++) pw.printf(", %-.6g", DI_RegisterTotals[i]);
      pw.println();
      pw.close();

      clearDI_Totals();
      if (overloadFileIsOpen) writeOverloadReport();
      if (voltageFileIsOpen) writeVoltageReport();
    }

    // sample generator and storage objects, too
    generatorClass.sampleAll();
    DSS.storageClass.sampleAll(); // samples energymeter part of storage elements (not update)
  }
예제 #2
0
  private void writeVoltageReport() {
    int i, j;
    double VmagPU;
    int underCount;
    int overCount;
    double overVMax;
    double underVMin;
    Bus bus;

    /* For any bus with a defined voltage base, test for > Vmax or < Vmin */

    overCount = 0;
    underCount = 0;

    Circuit ckt = DSS.activeCircuit;

    overVMax = ckt.getNormalMinVolts();
    underVMin = ckt.getNormalMaxVolts();
    for (i = 0; i < ckt.getNumBuses(); i++) {
      bus = ckt.getBus(i);
      if (bus.getKVBase() > 0.0) {
        for (j = 0; j < bus.getNumNodesThisBus(); j++) {
          VmagPU = ckt.getSolution().getNodeV(bus.getRef(j)).abs() / bus.getKVBase() * 0.001;
          if (VmagPU > 0.1) { // ignore neutral buses
            underVMin = Math.min(underVMin, VmagPU);
            overVMax = Math.max(overVMax, VmagPU);
            if (VmagPU < ckt.getNormalMinVolts()) {
              underCount += 1;
              break; /* next i */
            } else if (VmagPU > ckt.getNormalMaxVolts()) {
              overCount += 1;
              break;
            }
          }
        }
      }
    } /* for i */

    PrintWriter pw = new PrintWriter(voltageFile);
    pw.printf("%-.6g,", ckt.getSolution().getDblHour());
    pw.printf(" %d, %-.6g, %d, %-.6g", underCount, underVMin, overCount, overVMax);
    pw.println();
    pw.close();
  }
예제 #3
0
  /** Reset all meters in active circuit to zero. */
  @Override
  public void resetAll() {
    Circuit ckt = DSS.activeCircuit;

    if (DSS.DIFilesAreOpen) closeAllDIFiles();

    if (saveDemandInterval) {
      /* Make directories to save data */
      File dir = new File(ckt.getCaseName());
      if (!dir.exists()) {
        try {
          dir.mkdir();
        } catch (Exception e) {
          DSS.doSimpleMsg(
              "Error making directory \"" + ckt.getCaseName() + "\": " + e.getMessage(), 522);
        }
      }
      DI_Dir = ckt.getCaseName() + "/DI_yr_" + String.valueOf(ckt.getSolution().getYear()).trim();
      dir = new File(DI_Dir);
      if (!dir.exists()) {
        try {
          dir.mkdir();
        } catch (Exception e) {
          DSS.doSimpleMsg(
              "Error making demand interval directory: \"" + DI_Dir + "\". " + e.getMessage(), 523);
        }
      }

      createDI_Totals();
      try {
        DI_Totals.close();
      } catch (IOException e) {
        DSS.doSimpleMsg("Error closing DI totals file: " + e.getMessage(), -1);
      }
    }

    for (EnergyMeterObj meter : ckt.getEnergyMeters()) meter.resetRegisters();

    systemMeter.reset();

    // reset generator objects, too
    generatorClass.resetRegistersAll();
    DSS.storageClass.resetRegistersAll();
  }
예제 #4
0
  /**
   * Scans the active circuit for overloaded PD elements and writes each to a file. This is called
   * only if in Demand Interval (DI) mode and the file is open.
   */
  private void writeOverloadReport() {
    double Cmax;
    Circuit ckt = DSS.activeCircuit;

    PrintWriter pw = new PrintWriter(overloadFile);

    /* Check PDElements only */
    for (PDElement elem : ckt.getPDElements()) {
      if (elem.isEnabled() && !elem.isShunt()) { // ignore shunts

        if (elem.getNormAmps() > 0.0 || elem.getEmergAmps() > 0.0) {
          elem.computeITerminal();
          Cmax = elem.maxTerminalOneIMag(); // for now, check only terminal 1 for overloads
          if (Cmax > elem.getNormAmps() || Cmax > elem.getEmergAmps()) {
            pw.printf("%-.6g,", ckt.getSolution().getDblHour());
            pw.printf(
                " %s, %-.4g, %-.4g,", Util.fullName(elem), elem.getNormAmps(), elem.getEmergAmps());
            if (elem.getNormAmps() > 0.0) {
              pw.printf(" %-.7g,", Cmax / elem.getNormAmps() * 100.0);
            } else {
              pw.print(" 0.0,");
            }
            if (elem.getEmergAmps() > 0.0) {
              pw.printf(" %-.7g,", Cmax / elem.getEmergAmps() * 100.0);
            } else {
              pw.print(" 0.0,");
            }
            /* Find bus of first terminal */
            pw.printf(
                " %-.3g ",
                ckt.getBus(ckt.getMapNodeToBus(elem.getNodeRef(0)).busRef - 1).getKVBase());

            pw.println();
          }
        }
      }
    }

    pw.close();
  }
예제 #5
0
  /** Get DSS options requested and put in the global result string. */
  public static int doGetCmd() {
    int paramPointer;
    Circuit ckt = DSS.activeCircuit;

    try {
      DSS.globalResult = ""; // initialize for appending

      // continue parsing command line
      String paramName = Parser.getInstance().getNextParam();
      String param = Parser.getInstance().stringValue();

      // there will be no named parameters in this command and the params
      // themselves will be the parameter name to return
      while (param.length() > 0) {
        paramPointer = optionList.getCommand(param);

        switch (paramPointer) {
          case -1:
            DSS.doSimpleMsg("Unknown parameter \"" + paramName + "\" for Get command ", 133);
            break;
          case 0:
            DSS.appendGlobalResult(ckt.getActiveCktElement().getDSSClassName());
            break;
          case 11:
            DSS.appendGlobalResult(ckt.getActiveCktElement().getDSSClassName());
            break;
          case 1:
            DSS.appendGlobalResult(ckt.getActiveCktElement().getName());
            break;
          case 12:
            DSS.appendGlobalResult(ckt.getActiveCktElement().getName());
            break;
          case 2:
            DSS.appendGlobalResult(String.valueOf(ckt.getSolution().getIntHour()));
            break;
          case 3:
            DSS.appendGlobalResult(String.format("%g", ckt.getSolution().getDynaVars().t));
            break;
          case 4:
            DSS.appendGlobalResult(String.valueOf(ckt.getSolution().getYear()));
            break;
          case 5:
            DSS.appendGlobalResult(String.format("%g", ckt.getSolution().getFrequency()));
            break;
          case 6:
            DSS.appendGlobalResult(String.format("%g", ckt.getSolution().getDynaVars().h));
            break;
          case 17:
            DSS.appendGlobalResult(String.format("%g", ckt.getSolution().getDynaVars().h));
            break;
          case 7:
            DSS.appendGlobalResult(Util.getSolutionModeID());
            break;
          case 8:
            DSS.appendGlobalResult(Util.getRandomModeID());
            break;
          case 9:
            DSS.appendGlobalResult(String.valueOf(ckt.getSolution().getNumberOfTimes()));
            break;
          case 10:
            DSS.appendGlobalResult(
                String.format(
                    "[ %d, %g ]",
                    String.valueOf(ckt.getSolution().getIntHour()),
                    ckt.getSolution().getDynaVars().t));
            break;
          case 13:
            DSS.appendGlobalResult(ckt.getName());
            break;
          case 14:
            DSS.appendGlobalResult(DSS.defaultEditor);
            break;
          case 15:
            DSS.appendGlobalResult(
                String.format("%g", ckt.getSolution().getConvergenceTolerance()));
            break;
          case 16:
            DSS.appendGlobalResult(String.valueOf(ckt.getSolution().getMaxIterations()));
            break;
          case 18:
            DSS.appendGlobalResult(Util.getLoadModel());
            break;
          case 19:
            DSS.appendGlobalResult(String.format("%g", ckt.getLoadMultiplier()));
            break;
          case 20:
            DSS.appendGlobalResult(String.format("%g", ckt.getNormalMinVolts()));
            break;
          case 21:
            DSS.appendGlobalResult(String.format("%g", ckt.getNormalMaxVolts()));
            break;
          case 22:
            DSS.appendGlobalResult(String.format("%g", ckt.getEmergMinVolts()));
            break;
          case 23:
            DSS.appendGlobalResult(String.format("%g", ckt.getEmergMaxVolts()));
            break;
          case 24:
            DSS.appendGlobalResult(
                String.format("%g", ckt.getDefaultDailyShapeObj().getMean() * 100.0));
            break;
          case 25:
            DSS.appendGlobalResult(
                String.format("%g", ckt.getDefaultDailyShapeObj().getStdDev() * 100.0));
            break;
          case 26:
            DSS.appendGlobalResult(ckt.getLoadDurCurve());
            break;
          case 27:
            DSS.appendGlobalResult(String.format("%g", (ckt.getDefaultGrowthRate() - 1.0) * 100.0));
            break;
          case 28:
            DSS.appendGlobalResult(String.format("%g", ckt.getAutoAddObj().getGenKW()));
            break;
          case 29:
            DSS.appendGlobalResult(String.format("%g", ckt.getAutoAddObj().getGenPF()));
            break;
          case 30:
            DSS.appendGlobalResult(String.format("%g", ckt.getAutoAddObj().getCapKVAr()));
            break;
          case 31:
            switch (ckt.getAutoAddObj().getAddType()) {
              case GEN:
                DSS.appendGlobalResult("generator");
                break;
              case CAP:
                DSS.appendGlobalResult("capacitor");
                break;
            }
            break;
          case 32:
            if (ckt.isDuplicatesAllowed()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 33:
            if (ckt.isZonesLocked()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 34:
            DSS.appendGlobalResult(String.format("%g", ckt.getUEWeight()));
            break;
          case 35:
            DSS.appendGlobalResult(String.format("%g", ckt.getLossWeight()));
            break;
          case 36:
            DSS.appendGlobalResult(Util.intArrayToString(ckt.getUERegs(), ckt.getNumUERegs()));
            break;
          case 37:
            DSS.appendGlobalResult(Util.intArrayToString(ckt.getLossRegs(), ckt.getNumLossRegs()));
            break;
          case 38:
            DSS.globalResult = "(";
            for (double vBase : ckt.getLegalVoltageBases())
              DSS.globalResult += String.format("%g, ", vBase);
            DSS.globalResult += ")";
            break;
          case 39:
            switch (ckt.getSolution().getAlgorithm()) {
              case NORMAL:
                DSS.appendGlobalResult("normal");
                break;
              case NEWTON:
                DSS.appendGlobalResult("newton");
                break;
            }
            break;
          case 40:
            if (ckt.isTrapezoidalIntegration()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 41:
            for (int i = 0; i < ckt.getAutoAddBusList().listSize(); i++)
              DSS.appendGlobalResult(ckt.getAutoAddBusList().get(i));
            break;
          case 42:
            DSS.appendGlobalResult(Util.getControlModeID());
            break;
          case 43:
            if (ckt.getControlQueue().isTrace()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 44:
            DSS.appendGlobalResult(String.format("%g", ckt.getGenMultiplier()));
            break;
          case 45:
            DSS.appendGlobalResult(ckt.getDefaultDailyShapeObj().getName());
            break;
          case 46:
            DSS.appendGlobalResult(ckt.getDefaultYearlyShapeObj().getName());
            break;
          case 47:
            DSS.appendGlobalResult("Get function not applicable.");
            break;
          case 48:
            if (ckt.isPositiveSequence()) {
              DSS.appendGlobalResult("positive");
            } else {
              DSS.appendGlobalResult("multiphase");
            }
            break;
          case 49:
            DSS.appendGlobalResult(String.format("%g", ckt.getPriceSignal()));
            break;
          case 50:
            DSS.appendGlobalResult(ckt.getPriceCurve());
            break;
          case 51:
            DSS.appendGlobalResult(
                String.format("%d", ckt.getActiveCktElement().getActiveTerminalIdx()));
            break;
          case 52:
            DSS.appendGlobalResult(String.format("%g", ckt.getFundamental()));
            break;
          case 53:
            if (ckt.getSolution().isDoAllHarmonics()) {
              DSS.appendGlobalResult("ALL");
            } else {
              for (int i = 0; i < ckt.getSolution().getHarmonicListSize(); i++)
                DSS.appendGlobalResult(String.format("%g", ckt.getSolution().getHarmonicList()[i]));
            }
            break;
          case 54:
            DSS.appendGlobalResult(String.valueOf(ckt.getSolution().getMaxControlIterations()));
            break;
          case 55:
            DSS.appendGlobalResult(ckt.getBusList().get(ckt.getActiveBusIndex()));
            break;
          case 56:
            DSS.appendGlobalResult(DSS.dataDirectory);
            break;
          case 57:
            for (int i = 0; i < ckt.getNumBuses(); i++)
              if (ckt.getBus(i).isKeep()) DSS.appendGlobalResult(ckt.getBusList().get(i));
            break;
          case 58:
            DSS.appendGlobalResult(ckt.getReductionStrategyString());
            break;
          case 59:
            if (DSS.energyMeterClass.isSaveDemandInterval()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 60:
            DSS.appendGlobalResult(String.format("%-.g", ckt.getPctNormalFactor()));
            break;
          case 61:
            if (DSS.energyMeterClass.isDI_Verbose()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 62:
            DSS.appendGlobalResult(ckt.getCaseName());
            break;
          case 63:
            DSS.appendGlobalResult(String.format("%d", ckt.getNodeMarkerCode()));
            break;
          case 64:
            DSS.appendGlobalResult(String.format("%d", ckt.getNodeMarkerWidth()));
            break;
          case 65:
            if (ckt.isLogEvents()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 66:
            if (Executive.getInstance().isRecorderOn()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 67:
            if (DSS.energyMeterClass.isDoOverloadReport()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 68:
            if (DSS.energyMeterClass.isDoVoltageExceptionReport()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 69:
            DSS.appendGlobalResult("Get function not applicable.");
            break;
          case 70:
            if (DSS.autoShowExport) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 71:
            DSS.appendGlobalResult(String.format("%d", DSS.maxAllocationIterations));
            break;
          case 72:
            DSS.appendGlobalResult(String.format("%d", DSS.defaultBaseFreq));
            break;
          case 73:
            if (ckt.isMarkSwitches()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 74:
            DSS.appendGlobalResult(String.format("%d", ckt.getSwitchMarkerCode()));
            break;
          case 75:
            DSS.appendGlobalResult(String.format("%-.6g", DSS.daisySize));
            break;
          case 76:
            if (ckt.isMarkTransformers()) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
            break;
          case 77:
            DSS.appendGlobalResult(String.format("%d", ckt.getTransMarkerCode()));
            break;
          case 78:
            DSS.appendGlobalResult(String.format("%d", ckt.getTransMarkerSize()));
            break;
          case 79:
            DSS.appendGlobalResult(Util.getActiveLoadShapeClass());
            break;
          case 80:
            DSS.appendGlobalResult(Util.getEarthModel(DSS.defaultEarthModel));
            break;
          case 81:
            if (DSS.logQueries) {
              DSS.appendGlobalResult("Yes");
            } else {
              DSS.appendGlobalResult("No");
            }
          default:
            // ignore excess parameters
            break;
        }

        paramName = Parser.getInstance().getNextParam();
        param = Parser.getInstance().stringValue();
      }

    } catch (Exception e) {
      DSS.appendGlobalResult("***Error***");
    }

    return 0;
  }
예제 #6
0
  /**
   * Set DSS options.
   *
   * <p>Solve command is re-routed here first to set options before solving.
   */
  public static int doSetCmd(int solveOption) {
    LoadShapeObj testLoadShapeObj;
    int[] numRegs;

    Parser parser = Parser.getInstance();
    Circuit ckt = DSS.activeCircuit;

    int ret = 0;

    // continue parsing command line
    int paramPointer = -1;
    String paramName = parser.getNextParam();
    String param = parser.stringValue();

    while (param.length() > 0) {
      if (paramName.length() == 0) {
        paramPointer += 1;
      } else {
        paramPointer = optionList.getCommand(paramName);
      }

      switch (paramPointer) {
        case -1:
          DSS.doSimpleMsg("Unknown parameter \"" + paramName + "\" for set command ", 130);
          break;
        case 0:
        case 11:
          DSSClassDefs.setObjectClass(param);
          break;
        case 1:
        case 12:
          DSS.setObject(param);
          break;
        case 2:
          ckt.getSolution().setIntHour(parser.integerValue());
          break;
        case 3:
          ckt.getSolution().getDynaVars().t = parser.doubleValue();
          break;
        case 4:
          ckt.getSolution().setYear(parser.integerValue());
          ckt.setDefaultGrowthFactor(
              Math.pow(ckt.getDefaultGrowthRate(), ckt.getSolution().getYear() - 1));
          break;
        case 5:
          ckt.getSolution().setFrequency(parser.doubleValue());
          break;
        case 6:
          ckt.getSolution().getDynaVars().h = Util.interpretTimeStepSize(param);
          break;
        case 17:
          ckt.getSolution().getDynaVars().h = Util.interpretTimeStepSize(param);
          break;
        case 7:
          ckt.getSolution().setMode(Util.interpretSolveMode(param)); // see DSSGlobals
          break;
        case 8:
          ckt.getSolution().setRandomType(Util.interpretRandom(param));
          break;
        case 9:
          ckt.getSolution().setNumberOfTimes(parser.integerValue());
          break;
        case 10:
          ExecHelper.setTime();
          break;
        case 13:
          ExecHelper.setActiveCircuit(param);
          break;
        case 14:
          DSS.defaultEditor = param; // 'Editor='
          break;
        case 15:
          ckt.getSolution().setConvergenceTolerance(parser.doubleValue());
          break;
        case 16:
          ckt.getSolution().setMaxIterations(parser.integerValue());
          break;
        case 18:
          ckt.getSolution()
              .setDefaultLoadModel(
                  Util.interpretLoadModel(param)); // for reverting to last on specified
          ckt.getSolution().setLoadModel(ckt.getSolution().getDefaultLoadModel());
          break;
        case 19:
          ckt.setLoadMultiplier(parser.doubleValue()); // set using loadMultiplier property
          break;
        case 20:
          ckt.setNormalMinVolts(parser.doubleValue());
          break;
        case 21:
          ckt.setNormalMaxVolts(parser.doubleValue());
          break;
        case 22:
          ckt.setEmergMinVolts(parser.doubleValue());
          break;
        case 23:
          ckt.setEmergMaxVolts(parser.doubleValue());
          break;
        case 24:
          ckt.getDefaultDailyShapeObj().setMean(parser.doubleValue() / 100.0);
          break;
        case 25:
          ckt.getDefaultDailyShapeObj().setStdDev(parser.doubleValue() / 100.0);
          break;
        case 26:
          ckt.setLoadDurCurve(param);
          ckt.setLoadDurCurveObj((LoadShapeObj) DSS.loadShapeClass.find(param));
          if (ckt.getLoadDurCurveObj() == null)
            DSS.doSimpleMsg("Load-duration curve not found.", 131);
          break;
        case 27:
          ckt.setDefaultGrowthRate(1.0 + parser.doubleValue() / 100.0);
          ckt.setDefaultGrowthFactor(
              Math.pow(ckt.getDefaultGrowthRate(), ckt.getSolution().getYear() - 1));
          break;
        case 28:
          ckt.getAutoAddObj().setGenKW(parser.doubleValue());
          break;
        case 29:
          ckt.getAutoAddObj().setGenPF(parser.doubleValue());
          break;
        case 30:
          ckt.getAutoAddObj().setCapKVAr(parser.doubleValue());
          break;
        case 31:
          ckt.getAutoAddObj().setAddType(Util.interpretAddType(param));
          break;
        case 32:
          ckt.setDuplicatesAllowed(Util.interpretYesNo(param));
          break;
        case 33:
          ckt.setZonesLocked(Util.interpretYesNo(param));
          break;
        case 34:
          ckt.setUEWeight(parser.doubleValue());
          break;
        case 35:
          ckt.setLossWeight(parser.doubleValue());
          break;
        case 36:
          numRegs = new int[1];
          ckt.setUERegs(Util.parseIntArray(ckt.getUERegs(), numRegs, param));
          ckt.setNumUERegs(numRegs[0]);
          break;
        case 37:
          numRegs = new int[1];
          ckt.setLossRegs(Util.parseIntArray(ckt.getLossRegs(), numRegs, param));
          ckt.setNumLossRegs(numRegs[0]);
          break;
        case 38:
          ExecHelper.doLegalVoltageBases();
          break;
        case 39:
          ckt.getSolution().setAlgorithm(Util.interpretSolveAlg(param));
          break;
        case 40:
          ckt.setTrapezoidalIntegration(Util.interpretYesNo(param));
          break;
        case 41:
          ExecHelper.doAutoAddBusList(param);
          break;
        case 42:
          ckt.getSolution().setControlMode(Util.interpretControlMode(param));
          ckt.getSolution()
              .setDefaultControlMode(
                  ckt.getSolution()
                      .getControlMode()); // always revert to last one specified in a script
          break;
        case 43:
          ckt.getControlQueue().setTrace(Util.interpretYesNo(param));
          break;
        case 44:
          ckt.setGenMultiplier(parser.doubleValue());
          break;
        case 45:
          testLoadShapeObj = (LoadShapeObj) DSS.loadShapeClass.find(param);
          if (testLoadShapeObj != null) ckt.setDefaultDailyShapeObj(testLoadShapeObj);
          break;
        case 46:
          testLoadShapeObj = (LoadShapeObj) DSS.loadShapeClass.find(param);
          if (testLoadShapeObj != null) ckt.setDefaultYearlyShapeObj(testLoadShapeObj);
          break;
        case 47:
          ExecHelper.doSetAllocationFactors(parser.doubleValue());
          break;
        case 48:
          ckt.setPositiveSequence(Util.interpretCktModel(param));
          break;
        case 49:
          ckt.setPriceSignal(parser.doubleValue());
          break;
        case 50:
          ckt.setPriceCurve(param);
          ckt.setPriceCurveObj((PriceShapeObj) DSS.loadShapeClass.find(param));
          if (ckt.getPriceCurveObj() == null)
            DSS.doSimpleMsg("PriceShape: \"" + param + "\" not found.", 132);
          break;
        case 51:
          if (ckt.getActiveCktElement() != null) {
            CktElement elem = ckt.getActiveCktElement();
            elem.setActiveTerminalIdx(parser.integerValue());
            DSS.setActiveBus(
                Util.stripExtension(
                    elem.getBus(elem.getActiveTerminalIdx()))); // bus connected to terminal
          }
          break;
        case 52:
          ckt.setFundamental(
              parser.doubleValue()); // set base frequency for system (used henceforth)
          ckt.getSolution().setFrequency(parser.doubleValue());
          break;
        case 53:
          ExecHelper.doHarmonicsList(param);
          break;
        case 54:
          ckt.getSolution().setMaxControlIterations(parser.integerValue());
          break;
        case 55:
          ret = DSS.setActiveBus(param); // see DSS globals
          break;
        case 56:
          DSS.setDataPath(param); // set a legal data path
          break;
        case 57:
          ExecHelper.doKeeperBusList(param);
          break;
        case 58:
          ExecHelper.doSetReduceStrategy(param);
          break;
        case 59:
          DSS.energyMeterClass.setSaveDemandInterval(Util.interpretYesNo(param));
          break;
        case 60:
          ckt.setPctNormalFactor(parser.doubleValue());
          ExecHelper.doSetNormal(ckt.getPctNormalFactor());
          break;
        case 61:
          DSS.energyMeterClass.setDIVerbose(Util.interpretYesNo(param));
          break;
        case 62:
          ckt.setCaseName(parser.stringValue());
          break;
        case 63:
          ckt.setNodeMarkerCode(parser.integerValue());
          break;
        case 64:
          ckt.setNodeMarkerWidth(parser.integerValue());
          break;
        case 65:
          ckt.setLogEvents(Util.interpretYesNo(param));
          break;
        case 66:
          Executive.getInstance().setRecorderOn(Util.interpretYesNo(param));
          break;
        case 67:
          DSS.energyMeterClass.setDoOverloadReport(Util.interpretYesNo(param));
          break;
        case 68:
          DSS.energyMeterClass.setDoVoltageExceptionReport(Util.interpretYesNo(param));
          break;
        case 69:
          ExecHelper.doSetCFactors(parser.doubleValue());
          break;
        case 70:
          DSS.autoShowExport = Util.interpretYesNo(param);
          break;
        case 71:
          DSS.maxAllocationIterations = parser.integerValue();
          break;
        case 72:
          DSS.defaultBaseFreq = parser.doubleValue();
          ckt.setFundamental(
              parser.doubleValue()); // set base frequency for system (used henceforth)
          ckt.getSolution().setFrequency(parser.doubleValue());
          break;
        case 73:
          ckt.setMarkSwitches(Util.interpretYesNo(param));
          break;
        case 74:
          ckt.setSwitchMarkerCode(parser.integerValue());
          break;
        case 75:
          DSS.daisySize = parser.doubleValue();
          break;
        case 76:
          ckt.setMarkTransformers(Util.interpretYesNo(param));
          break;
        case 77:
          ckt.setTransMarkerCode(parser.integerValue());
          break;
        case 78:
          ckt.setTransMarkerSize(parser.integerValue());
          break;
        case 79:
          ckt.setActiveLoadShapeClass(Util.interpretLoadShapeClass(param));
          break;
        case 80:
          DSS.defaultEarthModel = Util.interpretEarthModel(param);
          break;
        case 81:
          DSS.logQueries = Util.interpretYesNo(param);
          if (DSS.logQueries) DSS.resetQueryLogFile();
        default:
          // ignore excess parameters
          break;
      }

      switch (paramPointer) {
        case 3:
          ckt.getSolution().updateDblHour();
          break;
        case 4:
          ckt.getSolution().updateDblHour();
          break;
      }

      paramName = parser.getNextParam();
      param = parser.stringValue();
    }

    if (solveOption == 1) ExecHelper.doSolveCmd();

    return ret;
  }