/**
* Check if equator is visible on screen.
*
* @return boolean
*/
public boolean overEquator() {
LatLonPoint llN = new LatLonPoint.Float();
inverse(width / 2, 0, llN);
LatLonPoint llS = new LatLonPoint.Float();
inverse(width / 2, height, llS);
return MoreMath.sign(llN.getY()) != MoreMath.sign(llS.getY());
}
public boolean determineLocation(MouseEvent e) {
Projection projection = getProjection();
if (cache != null && projection != null) {
LatLonPoint ll = projection.inverse(e.getX(), e.getY(), new LatLonPoint.Double());
location = new DTEDLocation(e.getX(), e.getY());
location.setElevation(cache.getElevation((float) ll.getY(), (float) ll.getX()));
location.generate(projection);
repaint();
return true;
}
return false;
}
/**
* Add a point at a certain point in the polygon coordinate list. If the position is less than
* zero, the point will be the starting point. If the position is greater than the list of current
* points, the point will be added to the end of the poly. This method is convenient because it
* lets you define the GrabPoint object to use for the node, in case you need a special type of
* GrabPoint.
*
* @return the index for the point in the polygon, starting with 0.
*/
public int addPoint(GrabPoint gp, int position) {
if (gp == null) {
return -1;
}
int x = gp.getX();
int y = gp.getY();
int renderType = poly.getRenderType();
boolean rads = (poly.getUnits() == OMGraphic.RADIANS);
if (renderType == OMGraphic.RENDERTYPE_LATLON) {
Debug.message("eomg", "EditableOMPoly: adding point to lat/lon poly");
if (projection != null) {
double[] ll = poly.getLatLonArray();
int actualPosition = (position == Integer.MAX_VALUE ? ll.length : position * 2);
LatLonPoint llpnt = projection.inverse(x, y, new LatLonPoint.Double());
if (Debug.debugging("eomp")) {
Debug.output(
"EditableOMPoly: adding point to lat/lon poly at "
+ x
+ ", "
+ y
+ ": "
+ llpnt
+ ", at the end of ");
for (int j = 0; j < ll.length; j += 2) {
Debug.output(ll[j] + ", " + ll[j + 1]);
}
}
double[] newll = new double[ll.length + 2];
double newlat;
double newlon;
if (rads) {
newlat = llpnt.getRadLat();
newlon = llpnt.getRadLon();
} else {
newlat = llpnt.getY();
newlon = llpnt.getX();
}
if (actualPosition >= ll.length) {
// Put the new points at the end
if (ll.length != 0) {
System.arraycopy(ll, 0, newll, 0, ll.length);
}
newll[ll.length] = newlat;
newll[ll.length + 1] = newlon;
position = ll.length / 2;
} else if (actualPosition <= 0) {
// Put the new point at the beginning
System.arraycopy(ll, 0, newll, 2, ll.length);
newll[0] = newlat;
newll[1] = newlon;
position = 0;
} else {
// actualPosition because there are 2 floats for
// every
// position.
newll[actualPosition] = newlat;
newll[actualPosition + 1] = newlon;
System.arraycopy(ll, 0, newll, 0, actualPosition);
System.arraycopy(
ll, actualPosition, newll, actualPosition + 2, ll.length - actualPosition);
}
poly.setLocation((double[]) newll, poly.getUnits());
}
} else if (renderType == OMGraphic.RENDERTYPE_XY) {
// Grab the projected endpoints
Debug.message("eomg", "EditableOMPoly: adding point to x/y poly");
int currentLength = poly.xs.length;
int[] newxs = new int[currentLength + 1];
int[] newys = new int[currentLength + 1];
if (position >= currentLength) {
// Put the new points at the end
System.arraycopy(poly.xs, 0, newxs, 0, currentLength);
System.arraycopy(poly.ys, 0, newys, 0, currentLength);
newxs[currentLength] = x;
newys[currentLength] = y;
position = currentLength;
} else if (position <= 0) {
// Put the new points at the beginning
System.arraycopy(poly.xs, 0, newxs, 1, currentLength);
System.arraycopy(poly.ys, 0, newys, 1, currentLength);
newxs[0] = x;
newys[0] = y;
position = 0;
} else {
newxs[position] = x;
newys[position] = y;
System.arraycopy(poly.xs, 0, newxs, 0, position);
System.arraycopy(poly.xs, position, newxs, position + 1, currentLength - position);
System.arraycopy(poly.ys, 0, newys, 0, position);
System.arraycopy(poly.ys, position, newys, position + 1, currentLength - position);
}
poly.setLocation(newxs, newys);
} else {
// Rendertype is offset...
// Grab the projected endpoints
Debug.message("eomg", "EditableOMPoly: adding point to offset poly");
int currentLength = poly.xs.length;
int[] newxs = new int[currentLength + 1];
int[] newys = new int[currentLength + 1];
if (position >= currentLength) {
// Put the new points at the end
position = currentLength;
System.arraycopy(poly.xs, 0, newxs, 0, currentLength);
System.arraycopy(poly.ys, 0, newys, 0, currentLength);
} else if (position <= 0) {
// Put the new points at the beginning
position = 0;
System.arraycopy(poly.xs, 0, newxs, 1, currentLength);
System.arraycopy(poly.ys, 0, newys, 1, currentLength);
} else {
System.arraycopy(poly.xs, 0, newxs, 0, position);
System.arraycopy(poly.xs, position, newxs, position + 1, currentLength - position);
System.arraycopy(poly.ys, 0, newys, 0, position);
System.arraycopy(poly.ys, position, newys, position + 1, currentLength - position);
}
int offsetX;
int offsetY;
if (gpo.getX() == -1 && gpo.getY() == -1) {
offsetX = projection.getWidth() / 2;
offsetY = projection.getHeight() / 2;
} else {
offsetX = gpo.getX();
offsetY = gpo.getY();
}
if (poly.coordMode == OMPoly.COORDMODE_ORIGIN || position == 0) { // cover
// the
// first
// point
newxs[position] = x - offsetX;
newys[position] = y - offsetY;
} else { // CMode Previous offset deltas
newxs[position] = x - offsetX - newxs[position - 1];
newys[position] = y - offsetY - newys[position - 1];
}
if (position == 0) {
// Could call projection.getCenter() but that might
// break if/when we make other projection
// libraries/paradigms active.
LatLonPoint llpnt = projection.inverse(offsetX, offsetY, new LatLonPoint.Double());
if (rads) {
poly.lat = llpnt.getRadLat();
poly.lon = llpnt.getRadLon();
} else {
poly.lat = llpnt.getY();
poly.lon = llpnt.getX();
}
}
poly.setLocation(poly.lat, poly.lon, poly.getUnits(), newxs, newys);
}
// Need to reset the arrowhead when an end point is added,
// removing it from the shape when the point gets added.
// Otherwise, you end up with a arrowhead at each junction of
// the polygon.
OMArrowHead omah = poly.getArrowHead();
poly.setArrowHead(null);
// Reset the arrowhead so it will get drawn on the new
// segment.
poly.setArrowHead(omah);
polyGrabPoints.add(position, gp);
if (gpo != null) {
gpo.addGrabPoint(gp);
}
// This is the standard call that needs to be made here, the
// arrowhead changes are around this.
poly.regenerate(projection);
gp.generate(projection);
return position;
}