コード例 #1
0
ファイル: GUI.java プロジェクト: jhosler0793/Multiuser-Chat
 public void actionPerformed(ActionEvent event) {
   if (event.getSource() == joinButton) {
     if (joinButton.isSelected()) {
       mThread =
           new MulticastThread(
               Integer.valueOf(portField.getText()), chatIPField.getText(), chatroomArea, true);
       (new Thread(mThread)).start();
     }
   }
   if (event.getSource() == sendButton) {
     mThread.send(usernameField.getText(), chatMsgField.getText());
     chatMsgField.setText("");
   }
   if (event.getSource() == leaveButton) {
     try {
       joinButton.setSelected(false);
       mThread.leave();
       System.out.println("Disconnected from chat ");
     } catch (Exception e) {
     }
   }
   if (event.getSource() == exitButton) {
     System.exit(0);
   }
 }
コード例 #2
0
ファイル: ObjectManager.java プロジェクト: cmci/tango
 public void hide(boolean refresh) {
   container.remove(layout);
   if (showMeasurements.isSelected()) {
     container.remove(measurements);
     showMeasurements.setSelected(false);
   }
   if (refresh) core.refreshDisplay();
 }
コード例 #3
0
ファイル: GLDemo.java プロジェクト: timburrow/OpenVnmrJ
  public GLDemo() {
    super(VNMRFrame.getVNMRFrame(), "Jogl Demo", false);

    DisplayOptions.addChangeListener(this);

    contentPane = getContentPane();
    contentPane.setLayout(new BorderLayout());

    gradientPanel = createGradientPanel();

    contentPane.add(gradientPanel, BorderLayout.CENTER);

    checkBox = new JCheckBox("Transparent", true);
    checkBox.setActionCommand("transparancy");
    checkBox.addActionListener(this);
    optionsPan = new JPanel();
    optionsPan.setLayout(new SimpleH2Layout(SimpleH2Layout.LEFT, 5, 0, true, false));
    optionsPan.setBorder(new EtchedBorder(EtchedBorder.LOWERED));

    optionsPan.add(checkBox);

    runButton = new JToggleButton("Run");
    runButton.setActionCommand("run");
    runButton.setSelected(false);
    runButton.addActionListener(this);

    optionsPan.add(runButton);

    getContentPane().add(optionsPan, BorderLayout.SOUTH);
    setSize(300, 300);
    setLocation(300, 300);

    addWindowListener(
        new WindowAdapter() {
          public void windowClosing(WindowEvent e) {
            // Run this on another thread than the AWT event queue to
            // make sure the call to Animator.stop() completes before
            // exiting
            new Thread(
                    new Runnable() {
                      public void run() {
                        stop();
                      }
                    })
                .start();
          }
        });
    setVisible(false);
  }
コード例 #4
0
ファイル: ObjectManager.java プロジェクト: cmci/tango
 public void toggleShowMeasurements() {
   if (showMeasurements.isSelected()) {
     measurements.setStructures(currentNucId, currentStructureIdx);
     measurements.setObjects(list.getSelectedValues());
     this.container.add(measurements);
   } else this.container.remove(measurements);
   core.refreshDisplay();
 }
コード例 #5
0
ファイル: ObjectManager.java プロジェクト: cmci/tango
 @Override
 public void valueChanged(ListSelectionEvent lse) {
   if (lse.getValueIsAdjusting()) {
     return;
   }
   if (populatingObjects || selectingObject || !showObjects.isSelected()) {
     return;
   }
   selectingObject = true;
   if (measurements != null && showMeasurements.isSelected())
     measurements.setObjects(list.getSelectedValues());
   try {
     showRois3D();
   } catch (Exception e) {
     exceptionPrinter.print(e, "", Core.GUIMode);
   }
   selectingObject = false;
 }
コード例 #6
0
ファイル: ObjectManager.java プロジェクト: cmci/tango
 public void setStructures(ObjectId id, Object[] selectedChannels) {
   // System.out.println("Set Structures: cell"+id+ " sel channels
   // length"+selectedChannels.length);
   this.currentNucId = id;
   this.currentChannels = new ObjectStructure[selectedChannels.length];
   currentStructureIdx = new int[selectedChannels.length];
   for (int i = 0; i < selectedChannels.length; i++) {
     currentChannels[i] = (ObjectStructure) selectedChannels[i];
     currentStructureIdx[i] = currentChannels[i].getIdx();
   }
   setSortKeys();
   populateObjects();
   if (showMeasurements.isSelected()) {
     measurements.setStructures(id, currentStructureIdx);
     measurements.setObjects(list.getSelectedValues());
   }
 }
コード例 #7
0
ファイル: ObjectManager.java プロジェクト: cmci/tango
 public void populateObjects() {
   try {
     this.listModel.removeAllElements();
     if (currentChannels == null) {
       return;
     }
     this.populatingObjects = true;
     ArrayList<Integer> selection = null;
     if (showSelection != null && showSelection.isSelected()) selection = new ArrayList<Integer>();
     int currentIdx = 0;
     for (ObjectStructure ass : currentChannels) {
       Object3D[] os = ass.getObjects();
       if (os != null) {
         Object3DGui[] osg = new Object3DGui[os.length];
         for (int i = 0; i < os.length; i++) osg[i] = new Object3DGui(os[i], ass);
         if (layout instanceof ObjectManagerLayout
             && currentChannels.length == 1
             && !((ObjectManagerLayout) layout).getSortKey().equals("idx"))
           this.sort(((ObjectManagerLayout) layout).getSortKey(), osg, ass.getIdx());
         // System.out.println("populating objects.. nb objects:"+os.length);
         for (Object3DGui o3D : osg) {
           this.listModel.addElement(o3D);
           if (selection != null && o3D.isInSelection()) selection.add(currentIdx);
           currentIdx++;
         }
         // if (selection!=null) System.out.println("populating objects.. selection
         // size:"+selection.size());
       } // else System.out.println("no objects int channel:"+ass.getChannelName());
     }
     if (selection != null && !selection.isEmpty()) {
       int[] sel = new int[selection.size()];
       int i = 0;
       for (int idx : selection) sel[i++] = idx;
       list.setSelectedIndices(sel);
     }
   } catch (Exception e) {
     exceptionPrinter.print(e, "", Core.GUIMode);
   }
   this.populatingObjects = false;
 }
コード例 #8
0
ファイル: ObjectManager.java プロジェクト: cmci/tango
 protected void initPanels() {
   BasicDBObject usr = Core.mongoConnector.getUser();
   splitDist = new DoubleParameter("Dist", "splitMinDistObj", 5d, DoubleParameter.nfDEC1);
   splitDist.dbGet(usr);
   splitRad = new DoubleParameter("Rad", "splitRadObj", 2d, DoubleParameter.nfDEC1);
   splitRad.dbGet(usr);
   ObjectManagerLayout lay = new ObjectManagerLayout(this);
   showObjects = lay.showROIs;
   showObjects.setSelected(true);
   splitDist.addToContainer(lay.splitDistPanel);
   showMeasurements = lay.viewMeasurements;
   measurements = new MeasurementDisplayer();
   this.listModel = new DefaultListModel();
   this.list = lay.list;
   this.list.setModel(listModel);
   this.list.setCellRenderer(new LCRenderer());
   this.list.setSelectionMode(ListSelectionModel.MULTIPLE_INTERVAL_SELECTION);
   this.list.setLayoutOrientation(JList.VERTICAL);
   listSelectionModel = list.getSelectionModel();
   listSelectionModel.addListSelectionListener(this);
   this.layout = lay;
 }
コード例 #9
0
 private static void initGui() {
   try {
     UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
   } catch (Exception exception) {
     exception.printStackTrace();
   }
   JFrame frame = new JFrame("DarkBot");
   frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
   frame.setLayout(new GridBagLayout());
   Insets noInsets = new Insets(0, 0, 0, 0);
   final JToggleButton sessionsButton = new JToggleButton("Login (0)");
   frame.add(
       sessionsButton,
       new GridBagConstraints(
           0, 0, 2, 1, 0, 0, GridBagConstraints.CENTER, GridBagConstraints.BOTH, noInsets, 0, 0));
   sessionsButton.addActionListener(
       new ActionListener() {
         @Override
         public void actionPerformed(ActionEvent e) {
           sessions.set(sessionsButton.isSelected());
           synchronized (sessions) {
             sessions.notifyAll();
           }
         }
       });
   final JToggleButton joinsButton = new JToggleButton("Join (0)");
   frame.add(
       joinsButton,
       new GridBagConstraints(
           0, 1, 2, 1, 0, 0, GridBagConstraints.CENTER, GridBagConstraints.BOTH, noInsets, 0, 0));
   joinsButton.addActionListener(
       new ActionListener() {
         @Override
         public void actionPerformed(ActionEvent e) {
           joins.set(joinsButton.isSelected());
           synchronized (joins) {
             joins.notifyAll();
           }
         }
       });
   final JTextField field = new JTextField();
   frame.add(
       field,
       new GridBagConstraints(
           0, 2, 1, 1, 1, 0, GridBagConstraints.CENTER, GridBagConstraints.BOTH, noInsets, 0, 0));
   final JButton button = new JButton("Start");
   frame.add(
       button,
       new GridBagConstraints(
           1, 2, 1, 1, 0, 0, GridBagConstraints.CENTER, GridBagConstraints.BOTH, noInsets, 0, 0));
   button.addActionListener(
       new ActionListener() {
         @Override
         public void actionPerformed(ActionEvent e) {
           if (button.getText().startsWith("Start")) {
             field.setEnabled(false);
             spamMessage = field.getText();
             button.setText("Stop");
           } else {
             spamMessage = null;
             button.setText("Start");
             field.setEnabled(true);
           }
         }
       });
   Timer timer =
       new Timer(
           500,
           new ActionListener() {
             @Override
             public void actionPerformed(ActionEvent e) {
               sessionsButton.setText(
                   sessionsButton.getText().split(" ")[0]
                       + " ("
                       + Integer.toString(sessionCount.get())
                       + ")");
               joinsButton.setText(
                   joinsButton.getText().split(" ")[0]
                       + " ("
                       + Integer.toString(amountJoined.get())
                       + ")");
             }
           });
   timer.setRepeats(true);
   timer.start();
   frame.pack();
   frame.setSize(500, frame.getHeight());
   frame.setLocationRelativeTo(null);
   frame.setVisible(true);
 }
コード例 #10
0
  private void guiSetup() throws IOException {
    setContentPane(root);

    // control
    commandMap.put(btnForward, Command.FORWARD);
    commandMap.put(btnBackward, Command.BACKWARD);
    commandMap.put(btnLeft, Command.TURN_LEFT);
    commandMap.put(btnRight, Command.TURN_RIGHT);
    commandMap.put(btnStop, Command.STOP);

    // Servo && Camera
    commandMap.put(btnServoDown, Command.SERVO_DOWN);
    commandMap.put(btnServoLeft, Command.SERVO_LEFT);
    commandMap.put(btnServoRight, Command.SERVO_RIGHT);
    commandMap.put(btnServoUp, Command.SERVO_UP);
    commandMap.put(btnCamera, Command.TOGGLE_CAMERA);

    // LEDs
    commandMap.put(btnLeftLed, Command.TOGGLE_LEFT_BLINK);
    commandMap.put(btnRightLed, Command.TOGGLE_RIGHT_BLINK);
    commandMap.put(btnLED, Command.TOGGLE_LED);

    // speeds
    commandMap.put(btnSpeed1, Command.SPEED);
    commandMap.put(btnSpeed2, Command.SPEED);
    commandMap.put(btnSpeed3, Command.SPEED);
    commandMap.put(btnSpeed4, Command.SPEED);
    commandMap.put(btnSpeed5, Command.SPEED);

    // debugs
    commandMap.put(btnLF, Command.LEFT_FORWARD);
    commandMap.put(btnLB, Command.LEFT_BACKWARD);
    commandMap.put(btnLP, Command.LEFT_PAUSE);
    commandMap.put(btnRF, Command.RIGHT_FORWARD);
    commandMap.put(btnRB, Command.RIGHT_BACKWARD);
    commandMap.put(btnRP, Command.RIGHT_PAUSE);

    for (AbstractButton button : commandMap.keySet()) {
      button.addActionListener(this);
    }
    btnQuit.addActionListener(this);
    btnConnection.addActionListener(this);
    btnReset.addActionListener(this);
    btnShutdown.addActionListener(this);

    /*
            btnForward.addActionListener (this);
            btnLeft.addActionListener (this);
            btnBackward.addActionListener (this);
            btnRight.addActionListener (this);
            btnStop.addActionListener (this);

            btnSpeed1.addActionListener (this);
            btnSpeed2.addActionListener (this);
            btnSpeed3.addActionListener (this);
            btnSpeed4.addActionListener (this);
            btnSpeed5.addActionListener (this);
            btnLeftLed.addActionListener (this);
            btnRightLed.addActionListener (this);
            btnServoLeft.addActionListener (this);
            btnServoUp.addActionListener (this);
            btnServoRight.addActionListener (this);
            btnServoDown.addActionListener (this);
            btnLED.addActionListener (this);
            btnCamera.addActionListener (this);
            btnLF.addActionListener (this);
            btnLB.addActionListener (this);
            btnLP.addActionListener (this);
            btnRF.addActionListener (this);
            btnRB.addActionListener (this);
            btnRP.addActionListener (this);
    */

    ButtonGroup group1 = new ButtonGroup();
    group1.add(btnSpeed1);
    group1.add(btnSpeed2);
    group1.add(btnSpeed3);
    group1.add(btnSpeed4);
    group1.add(btnSpeed5);
    btnSpeed3.setSelected(true);

    setButtonStatus(false);
  }
コード例 #11
0
ファイル: Check.java プロジェクト: charlesa101/insubstantial
  public static JToolBar getToolbar(String label, int size, boolean hasStrings) {
    JToolBar toolBar = new JToolBar();

    JButton buttonCut = new JButton(hasStrings ? "cut" : null, getIcon(size + "/edit-cut"));
    buttonCut.putClientProperty(SubstanceLookAndFeel.BUTTON_NO_MIN_SIZE_PROPERTY, Boolean.TRUE);
    toolBar.add(buttonCut);
    JButton buttonCopy = new JButton(hasStrings ? "copy" : null, getIcon(size + "/edit-copy"));
    buttonCopy.putClientProperty(SubstanceLookAndFeel.BUTTON_NO_MIN_SIZE_PROPERTY, Boolean.TRUE);
    buttonCopy.setEnabled(false);
    toolBar.add(buttonCopy);
    JButton buttonPaste = new JButton(getIcon(size + "/edit-paste"));
    toolBar.add(buttonPaste);
    JButton buttonSelectAll = new JButton(getIcon(size + "/edit-select-all"));
    toolBar.add(buttonSelectAll);
    JButton buttonDelete = new JButton(getIcon(size + "/edit-delete"));
    toolBar.add(buttonDelete);
    toolBar.addSeparator();

    // add an inner toolbar to check the painting of toolbar
    // gradient and drop shadows under different skins.
    JToolBar innerToolbar = new JToolBar(JToolBar.HORIZONTAL);
    innerToolbar.setFloatable(false);
    JToggleButton buttonFormatCenter = new JToggleButton(getIcon(size + "/format-justify-center"));
    buttonFormatCenter.putClientProperty(SubstanceLookAndFeel.CORNER_RADIUS, 5.0f);
    innerToolbar.add(buttonFormatCenter);
    JToggleButton buttonFormatLeft = new JToggleButton(getIcon(size + "/format-justify-left"));
    innerToolbar.add(buttonFormatLeft);
    JToggleButton buttonFormatRight = new JToggleButton(getIcon(size + "/format-justify-right"));
    innerToolbar.add(buttonFormatRight);
    JToggleButton buttonFormatFill = new JToggleButton(getIcon(size + "/format-justify-fill"));
    buttonFormatFill.putClientProperty(SubstanceLookAndFeel.CORNER_RADIUS, 0.0f);
    innerToolbar.add(buttonFormatFill);

    toolBar.add(innerToolbar);
    toolBar.addSeparator();

    if (size > 20) {
      JToolBar innerToolbar2 = new JToolBar(JToolBar.HORIZONTAL);
      innerToolbar2.setFloatable(false);

      JPanel innerPanel = new JPanel(new FlowLayout(FlowLayout.LEFT, 0, 0));
      innerToolbar2.add(innerPanel, BorderLayout.CENTER);

      final JToggleButton buttonStyleBold = new JToggleButton(getIcon(size + "/format-text-bold"));
      Set<Side> rightSide = EnumSet.of(Side.RIGHT);
      buttonStyleBold.putClientProperty(SubstanceLookAndFeel.BUTTON_OPEN_SIDE_PROPERTY, rightSide);
      buttonStyleBold.putClientProperty(SubstanceLookAndFeel.CORNER_RADIUS, 3.0f);

      final JToggleButton buttonStyleItalic =
          new JToggleButton(getIcon(size + "/format-text-italic"));
      buttonStyleItalic.putClientProperty(SubstanceLookAndFeel.CORNER_RADIUS, 0.0f);
      buttonStyleItalic.putClientProperty(
          SubstanceLookAndFeel.BUTTON_OPEN_SIDE_PROPERTY, rightSide);

      final JToggleButton buttonStyleUnderline =
          new JToggleButton(getIcon(size + "/format-text-underline"));
      buttonStyleUnderline.putClientProperty(SubstanceLookAndFeel.CORNER_RADIUS, 0.0f);
      buttonStyleUnderline.putClientProperty(
          SubstanceLookAndFeel.BUTTON_OPEN_SIDE_PROPERTY, rightSide);

      final JToggleButton buttonStyleStrikethrough =
          new JToggleButton(getIcon(size + "/format-text-strikethrough"));
      buttonStyleStrikethrough.putClientProperty(
          SubstanceLookAndFeel.BUTTON_SIDE_PROPERTY, EnumSet.of(Side.LEFT));
      buttonStyleStrikethrough.putClientProperty(SubstanceLookAndFeel.CORNER_RADIUS, 3.0f);
      buttonStyleBold.setSelected(true);

      innerPanel.add(buttonStyleBold);
      innerPanel.add(buttonStyleItalic);
      innerPanel.add(buttonStyleUnderline);
      innerPanel.add(buttonStyleStrikethrough);

      toolBar.add(innerToolbar2);
    }

    toolBar.add(Box.createGlue());
    JButton buttonExit = new JButton(getIcon(size + "/process-stop"));
    buttonExit.setToolTipText("Closes the test application");
    buttonExit.addActionListener(
        new ActionListener() {
          @Override
          public void actionPerformed(ActionEvent e) {
            System.exit(0);
          }
        });
    toolBar.add(buttonExit);

    return toolBar;
  }
コード例 #12
0
ファイル: GUI.java プロジェクト: jhosler0793/Multiuser-Chat
  private void initComponents() {
    try {
      for (LookAndFeelInfo info : UIManager.getInstalledLookAndFeels()) {
        if ("Nimbus".equals(info.getName())) {
          UIManager.setLookAndFeel(info.getClassName());
          break;
        }
      }
    } catch (Exception e) {
      // If Nimbus is not available, you can set the GUI to another look and feel.
    }

    usernameLabel = new JLabel();
    usernameField = new JTextField();
    chatroomScrollPane = new JScrollPane();
    chatroomArea = new JTextArea();
    chatMsgLabel = new JLabel();
    chatMsgField = new JTextField();
    chatIPLabel = new JLabel();
    chatIPField = new JTextField();
    portLabel = new JLabel();
    portField = new JTextField();
    joinButton = new JToggleButton();
    sendButton = new JButton();
    leaveButton = new JButton();
    exitButton = new JButton();

    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);

    usernameLabel.setText("Username:"******" ");

    chatroomArea.setEditable(false);
    chatroomArea.setColumns(20);
    chatroomArea.setRows(5);
    chatroomScrollPane.setViewportView(chatroomArea);

    chatMsgLabel.setText("Chat Message:");

    chatIPLabel.setText("Chat Group IP");

    chatIPField.setText("224.27.43.188");

    portLabel.setText("Port");

    portField.setText("4001");

    joinButton.setText("JOIN CHAT");
    joinButton.addActionListener(this);

    sendButton.setText("SEND MESSAGE");
    sendButton.addActionListener(this);

    leaveButton.setText("LEAVE CHAT");
    leaveButton.addActionListener(this);

    exitButton.setText("EXIT");
    exitButton.addActionListener(this);

    GroupLayout layout = new GroupLayout(getContentPane());
    getContentPane().setLayout(layout);
    layout.setHorizontalGroup(
        layout
            .createParallelGroup(GroupLayout.Alignment.LEADING)
            .addGroup(
                layout
                    .createSequentialGroup()
                    .addContainerGap()
                    .addGroup(
                        layout
                            .createParallelGroup(GroupLayout.Alignment.LEADING)
                            .addGroup(
                                GroupLayout.Alignment.TRAILING,
                                layout
                                    .createSequentialGroup()
                                    .addGap(0, 0, Short.MAX_VALUE)
                                    .addComponent(usernameLabel)
                                    .addPreferredGap(LayoutStyle.ComponentPlacement.RELATED)
                                    .addComponent(
                                        usernameField,
                                        GroupLayout.PREFERRED_SIZE,
                                        83,
                                        GroupLayout.PREFERRED_SIZE))
                            .addComponent(chatroomScrollPane)
                            .addGroup(
                                layout
                                    .createSequentialGroup()
                                    .addGroup(
                                        layout
                                            .createParallelGroup(GroupLayout.Alignment.LEADING)
                                            .addGroup(
                                                layout
                                                    .createSequentialGroup()
                                                    .addComponent(chatMsgLabel)
                                                    .addPreferredGap(
                                                        LayoutStyle.ComponentPlacement.RELATED)
                                                    .addComponent(
                                                        chatMsgField,
                                                        GroupLayout.PREFERRED_SIZE,
                                                        296,
                                                        GroupLayout.PREFERRED_SIZE))
                                            .addGroup(
                                                layout
                                                    .createSequentialGroup()
                                                    .addGroup(
                                                        layout
                                                            .createParallelGroup(
                                                                GroupLayout.Alignment.TRAILING,
                                                                false)
                                                            .addComponent(
                                                                chatIPField,
                                                                GroupLayout.Alignment.LEADING)
                                                            .addComponent(
                                                                chatIPLabel,
                                                                GroupLayout.Alignment.LEADING,
                                                                GroupLayout.DEFAULT_SIZE,
                                                                GroupLayout.DEFAULT_SIZE,
                                                                Short.MAX_VALUE))
                                                    .addGap(18, 18, 18)
                                                    .addGroup(
                                                        layout
                                                            .createParallelGroup(
                                                                GroupLayout.Alignment.LEADING,
                                                                false)
                                                            .addComponent(
                                                                portField,
                                                                GroupLayout.DEFAULT_SIZE,
                                                                46,
                                                                Short.MAX_VALUE)
                                                            .addComponent(
                                                                portLabel,
                                                                GroupLayout.DEFAULT_SIZE,
                                                                GroupLayout.DEFAULT_SIZE,
                                                                Short.MAX_VALUE))
                                                    .addGap(18, 18, 18)
                                                    .addGroup(
                                                        layout
                                                            .createParallelGroup(
                                                                GroupLayout.Alignment.LEADING,
                                                                false)
                                                            .addGroup(
                                                                layout
                                                                    .createSequentialGroup()
                                                                    .addComponent(leaveButton)
                                                                    .addGap(18, 18, 18)
                                                                    .addComponent(
                                                                        exitButton,
                                                                        GroupLayout.DEFAULT_SIZE,
                                                                        GroupLayout.DEFAULT_SIZE,
                                                                        Short.MAX_VALUE))
                                                            .addGroup(
                                                                layout
                                                                    .createSequentialGroup()
                                                                    .addComponent(
                                                                        joinButton,
                                                                        GroupLayout.PREFERRED_SIZE,
                                                                        93,
                                                                        GroupLayout.PREFERRED_SIZE)
                                                                    .addGap(18, 18, 18)
                                                                    .addComponent(sendButton)))))
                                    .addGap(0, 8, Short.MAX_VALUE)))
                    .addContainerGap()));

    layout.setVerticalGroup(
        layout
            .createParallelGroup(GroupLayout.Alignment.LEADING)
            .addGroup(
                layout
                    .createSequentialGroup()
                    .addContainerGap()
                    .addGroup(
                        layout
                            .createParallelGroup(GroupLayout.Alignment.LEADING, false)
                            .addComponent(usernameField)
                            .addComponent(
                                usernameLabel,
                                GroupLayout.DEFAULT_SIZE,
                                GroupLayout.DEFAULT_SIZE,
                                Short.MAX_VALUE))
                    .addGap(3, 3, 3)
                    .addComponent(
                        chatroomScrollPane,
                        GroupLayout.PREFERRED_SIZE,
                        178,
                        GroupLayout.PREFERRED_SIZE)
                    .addPreferredGap(LayoutStyle.ComponentPlacement.RELATED)
                    .addGroup(
                        layout
                            .createParallelGroup(GroupLayout.Alignment.BASELINE)
                            .addComponent(
                                chatMsgLabel,
                                GroupLayout.DEFAULT_SIZE,
                                GroupLayout.DEFAULT_SIZE,
                                Short.MAX_VALUE)
                            .addComponent(
                                chatMsgField,
                                GroupLayout.PREFERRED_SIZE,
                                GroupLayout.DEFAULT_SIZE,
                                GroupLayout.PREFERRED_SIZE))
                    .addGroup(
                        layout
                            .createParallelGroup(GroupLayout.Alignment.LEADING)
                            .addGroup(
                                layout
                                    .createSequentialGroup()
                                    .addPreferredGap(LayoutStyle.ComponentPlacement.RELATED)
                                    .addGroup(
                                        layout
                                            .createParallelGroup(GroupLayout.Alignment.BASELINE)
                                            .addComponent(chatIPLabel)
                                            .addComponent(portLabel))
                                    .addPreferredGap(LayoutStyle.ComponentPlacement.RELATED)
                                    .addGroup(
                                        layout
                                            .createParallelGroup(GroupLayout.Alignment.BASELINE)
                                            .addComponent(
                                                chatIPField,
                                                GroupLayout.PREFERRED_SIZE,
                                                GroupLayout.DEFAULT_SIZE,
                                                GroupLayout.PREFERRED_SIZE)
                                            .addComponent(
                                                portField,
                                                GroupLayout.PREFERRED_SIZE,
                                                GroupLayout.DEFAULT_SIZE,
                                                GroupLayout.PREFERRED_SIZE)))
                            .addGroup(
                                layout
                                    .createSequentialGroup()
                                    .addGap(16, 16, 16)
                                    .addGroup(
                                        layout
                                            .createParallelGroup(
                                                GroupLayout.Alignment.LEADING, false)
                                            .addComponent(
                                                joinButton,
                                                GroupLayout.DEFAULT_SIZE,
                                                GroupLayout.DEFAULT_SIZE,
                                                Short.MAX_VALUE)
                                            .addComponent(
                                                sendButton,
                                                GroupLayout.DEFAULT_SIZE,
                                                GroupLayout.DEFAULT_SIZE,
                                                Short.MAX_VALUE))
                                    .addGap(8, 8, 8)
                                    .addGroup(
                                        layout
                                            .createParallelGroup(GroupLayout.Alignment.BASELINE)
                                            .addComponent(leaveButton)
                                            .addComponent(exitButton))))
                    .addGap(17, 17, 17)));
    pack();
    setVisible(true);
  }
コード例 #13
0
ファイル: GLDemo.java プロジェクト: timburrow/OpenVnmrJ
 public void start() {
   runButton.setSelected(true);
   runButton.repaint();
   animator.start();
 }
コード例 #14
0
ファイル: GLDemo.java プロジェクト: timburrow/OpenVnmrJ
 public void stop() {
   runButton.setSelected(false);
   runButton.repaint();
   animator.stop();
 }
コード例 #15
0
ファイル: LJ3MDApp.java プロジェクト: eskilj/mvp
  public LJ3MDApp() {
    tNum.setHorizontalAlignment(JTextField.CENTER);
    tTemp.setHorizontalAlignment(JTextField.CENTER);
    tRho.setHorizontalAlignment(JTextField.CENTER);
    tSpeed.setHorizontalAlignment(JTextField.CENTER);

    tAvK.setHorizontalAlignment(JTextField.RIGHT);
    tAvU.setHorizontalAlignment(JTextField.RIGHT);
    tAvp.setHorizontalAlignment(JTextField.RIGHT);

    float[] aveKing = new float[501];
    float[] avePot = new float[501];
    float[] aveEn = new float[501];

    JFrame box = new JFrame();
    box.setLayout(new BorderLayout());
    box.setSize(1000, 1000);
    box.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);

    cpnl = new JPanel(); // create a panel for controls
    cpnl.setLayout(new GridLayout(18, 2));
    box.add(cpnl, BorderLayout.EAST);

    // add controls
    cpnl.add(bStart);
    bStart.addActionListener(this);

    cpnl.add(bReset);
    bReset.addActionListener(this);

    cpnl.add(new JLabel(" N:"));
    tNum.addActionListener(this);
    cpnl.add(tNum);

    cpnl.add(new JLabel(" Density (\u03c1):"));
    tRho.addActionListener(this);
    cpnl.add(tRho);

    cpnl.add(new JLabel(" Steps/frame:"));
    tSpeed.addActionListener(this);
    cpnl.add(tSpeed);

    cpnl.add(bTstat);
    bTstat.addActionListener(this);

    cpnl.add(bPot);
    bPot.addActionListener(this);

    cpnl.add(new JLabel(" < K/N > :"));
    tAvK.setEditable(false);
    cpnl.add(tAvK);

    cpnl.add(new JLabel(" Temperature:"));
    tTemp.setEditable(false);
    cpnl.add(tTemp);

    cpnl.add(new JLabel(" < U/N > :"));
    tAvU.setEditable(false);
    cpnl.add(tAvU);

    cpnl.add(new JLabel(" < pressure > :"));
    tAvp.setEditable(false);
    cpnl.add(tAvp);

    cpnl.add(bRetime);
    bRetime.addActionListener(this);

    spnl = new JPanel(); // create a panel for status
    box.add(spnl, BorderLayout.SOUTH);
    lStatus.setFont(new Font("Courier", 0, 12));
    spnl.add(lStatus);

    canvas = new XYZCanvas();
    box.add(canvas, BorderLayout.CENTER);

    timer = new Timer(delay, this);
    timer.start();
    //        timer.stop();
    box.setVisible(true);
  }
コード例 #16
0
ファイル: LJ3MDApp.java プロジェクト: eskilj/mvp
  public void actionPerformed(ActionEvent e) {
    Object src = e.getSource();
    if (src == timer) {
      for (int i = 0; i < speed; i++) // integrate a few steps
      md.vv();
      repaint();
      return;
    }

    boolean adjCanvasScale = false;

    if (src == bTstat) md.thermostat = !md.thermostat;

    if (src == bPot) {
      md.ljPotential = !md.ljPotential;
      md.clearData();

      if (timer.isRunning()) timer.stop();
      bStart.setSelected(false);
      bStart.setText("Start");
      md.init(md.rho);
    }

    if (src == tTemp || src == bReset) {
      double kT = Double.parseDouble(tTemp.getText().trim());
      if (kT < 1e-8) {
        kT = 1e-8;
        tTemp.setText("  " + kT);
      }
      md.kT = kT;
      md.clearData();
    }

    if (src == tRho || src == bReset) {
      double rho = Double.parseDouble(tRho.getText().trim());
      if (rho < 1e-3) {
        rho = 1e-3;
        tRho.setText("   " + rho);
      }
      if (rho > 1.2) {
        rho = 1.2;
        tRho.setText("   " + rho);
      }
      md.setDensity(rho);
      md.clearData();
      adjCanvasScale = true;
    }

    if (src == tSpeed || src == bReset) {
      speed = Integer.parseInt(tSpeed.getText().trim());
      if (speed < 1) {
        speed = 1;
        tSpeed.setText("   " + speed);
      }
    }

    if (src == bRetime) md.clearData();

    if (src == bStart) {
      boolean on = bStart.isSelected();
      if (on) {
        timer.restart();
        bStart.setText("Pause");
      } else {
        timer.stop();
        bStart.setText("Resume");
      }
    }

    if (src == tNum) {
      int n = Integer.parseInt(tNum.getText().trim());
      if (n < 2) {
        n = 2;
        tNum.setText(" " + n);
      }
      md.N = n;
      md.init(md.rho);
      adjCanvasScale = true;
    }

    if (src == bReset) {
      if (timer.isRunning()) timer.stop();
      bStart.setSelected(false);
      bStart.setText("Start");
      md.init(md.rho);
    }

    canvas.refresh(md.getXWrap(), md.N, true, adjCanvasScale);

    repaint();
  }