/**
* Process the Query, and generate response
*
* @param query the query to process
*/
public int processQuery(ResolverQueryMsg query) {
if (!useRouteResolver) { // Route resolver disabled
return ResolverService.OK;
}
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processQuery starts");
}
RouteQuery routeQuery = null;
Reader ip = null;
try {
ip = new StringReader(query.getQuery());
StructuredTextDocument asDoc =
(StructuredTextDocument)
StructuredDocumentFactory.newStructuredDocument(MimeMediaType.XMLUTF8, ip);
routeQuery = new RouteQuery(asDoc);
} catch (Throwable e) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("Malformed Route query ", e);
}
return ResolverService.OK;
} finally {
try {
if (null != ip) {
ip.close();
ip = null;
}
} catch (Throwable ignored) {;
}
}
PeerID pId = routeQuery.getDestPeerID();
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processQuery: looking for route to " + pId);
}
RouteAdvertisement srcRoute = routeQuery.getSrcRoute();
List badHops = routeQuery.getBadHops();
if (LOG.isEnabledFor(Level.DEBUG)) {
if (badHops != null) {
LOG.debug("processQuery: bad Hops");
for (int i = 0; i < badHops.size(); i++) {
LOG.debug("processQuery: :" + ((PeerID) badHops.get(i)).toString());
}
}
}
// if our source route is not null, then publish it
if (srcRoute != null) {
if (!(srcRoute.getDestPeerID()).equals(localPeerId)) {
// This is not our own peer adv so we must not keep it
// longer than its expiration time.
try {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processQuery: publishing sender route info " + srcRoute.getDestPeerID());
}
// we only need to publish this route if
// we don't know about it yet
// XXX: here is where we could be more conservative and use isNormallyReachable() instead,
// thus excluding
// incoming messengers.
if ((!router.isLocalRoute(router.pid2addr(srcRoute.getDestPeerID())))
&& (!router.isRoutedRoute(router.pid2addr(srcRoute.getDestPeerID())))) {
routeCM.publishRoute(srcRoute);
}
} catch (Exception e) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("Could not publish Route Adv from query - discard", e);
}
return ResolverService.OK;
}
}
} else {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("No src Route in route query - discard ");
}
return ResolverService.OK;
}
if (pId == null) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("Malformed route query request, no PeerId - discard");
}
return ResolverService.OK;
}
// We have more luck with that one because, since it is part of OUR
// message, and not part of the resolver protocol, it is in OUR
// format.
EndpointAddress qReqAddr = router.pid2addr(pId);
RouteAdvertisement route = null;
// check if this peer has a route to the destination
// requested
boolean found = false;
if (qReqAddr.equals(localPeerAddr)) {
found = true;
// return the route that is my local route
route = router.getMyLocalRoute();
} else {
// only rendezvous can respond to route requests
// if not we are generating too much traffic
// XXX: here is where we could be more conservative and use isNormallyReachable() instead,
// thus excluding
// incoming messengers.
if (router.isLocalRoute(qReqAddr)) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processQuery: peer has direct route to destination ");
}
// we should set the route to something :-)
found = true;
// this peer has a direct route to the destination
// return the short route advertisement we know for this peer
// (For us it is zero hop, and we advertise ourself as the routing
// peer in the response. The stiching is done by whoever gets that
// response). May be there are more than one hop advertised in-there...
// alternate routing peers...should we leave them ?
// For now, we keep the full dest, but wack the hops.
route =
(RouteAdvertisement)
AdvertisementFactory.newAdvertisement(RouteAdvertisement.getAdvertisementType());
AccessPointAdvertisement ap =
(AccessPointAdvertisement)
AdvertisementFactory.newAdvertisement(
AccessPointAdvertisement.getAdvertisementType());
ap.setPeerID(pId);
route.setDest(ap);
} else {
route = router.getRoute(qReqAddr, false);
if (route != null) {
found = true;
// check if we were given some bad hops info
// and see if the found route contains
// any of these bad hops. In that case, we need
// to mark this route as bad
for (int i = 0; i < badHops.size(); i++) {
// destination is known to be bad
if (router.addr2pid(qReqAddr).equals(((PeerID) badHops.get(i)))) {
processBadRoute((PeerID) badHops.get(i), route);
found = false;
break;
}
if (route.containsHop((PeerID) badHops.get(i))) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug(
"processQuery: peer has bad route due to "
+ ((PeerID) badHops.get(i)).toString());
}
processBadRoute((PeerID) badHops.get(i), route);
found = false;
break;
}
}
}
}
}
if (!found) {
// discard the request if we are not a rendezvous
// else forward to the next peers
if (!group.isRendezvous()) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("discard query forwarding as not a rendezvous");
}
return ResolverService.OK;
}
// did not find a route, check our srdi cache
// make sure we protect against out of sync
// SRDI index
// srdi forwarding is only involved once the Index entry has
// been found and we forwarded the resolver query. Afterward a
// normal walk proceeds from the initial SRDI index pointing
// rdv. This is done to protect against potential loopback
// entries in the SRDI cache index due to out of sync peerview
// and index.
if (query.getHopCount() < 2) {
// check local SRDI cache to see if we have the entry
// we look for 10 entries, will pickup one randomly
Vector results = srdiIndex.query("route", "DstPID", pId.toString(), 10);
if (results.size() > 0) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processQuery srdiIndex lookup match :" + results.size());
}
// remove any non-rdv peers to avoid sending
// to a non-rdv peers and garbage collect the SRDI
// index in the process
Vector clean = cleanupAnyEdges(query.getSrc(), results);
if (clean.size() > 0) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("found an srdi entry forwarding query to SRDI peer");
}
// The purpose of incrementing the hopcount
// when an SRDI index match is found (we got a
// pointer to a rdv that should have the route) is to
// restrict any further forwarding. The increment
// count is only done when a matching SRDI index is
// found. Not when the replica is selected as we
// still need to forward the query. This restriction
// is purposelly done to avoid too many longjumps
// within a walk.
query.incrementHopCount();
// Note: this forwards the query to 1 peer randomly
// selected from the result
srdi.forwardQuery(clean, query, 1);
// tell the resolver no further action is needed.
return ResolverService.OK;
}
}
}
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("did not find a route or SRDI index");
}
// force a walk
return ResolverService.Repropagate;
}
// we found a route send the response
try {
if (route == null) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("we should have had a route at this point");
}
return ResolverService.OK;
}
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processQuery: we have a route build route response" + route.display());
}
RouteAdvertisement myRoute = router.getMyLocalRoute();
// make sure we initialized our local
// route info as we will need it to respond. We may
// not have our route if we are still
// waiting for a relay connection.
if (myRoute == null) {
return ResolverService.OK;
}
RouteResponse routeResponse = new RouteResponse();
routeResponse.setDestRoute(route);
routeResponse.setSrcRoute(myRoute);
if (routeResponse == null) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("error creating route response");
}
return ResolverService.OK;
}
// construct a response from the query
ResolverResponseMsg res = query.makeResponse();
res.setCredential(credentialDoc);
res.setResponse(routeResponse.toString());
resolver.sendResponse(query.getSrc(), res);
return ResolverService.OK;
} catch (Exception ee) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processQuery: error while processing query ", ee);
}
return ResolverService.OK;
}
}
/**
* {@inheritDoc}
*
* <p>This is called by the Generic ResolverServiceImpl when processing a response to a query.
*/
public void processResponse(ResolverResponseMsg response) {
if (!useRouteResolver) { // Route resolver disabled
return;
}
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processResponse got a response");
}
// convert the response into a RouteResponse
Reader ip = null;
RouteResponse doc = null;
try {
ip = new StringReader(response.getResponse());
StructuredTextDocument asDoc =
(StructuredTextDocument)
StructuredDocumentFactory.newStructuredDocument(MimeMediaType.XMLUTF8, ip);
doc = new RouteResponse(asDoc);
} catch (Throwable e) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processResponse: malformed response - discard", e);
}
return;
} finally {
try {
if (null != ip) {
ip.close();
ip = null;
}
} catch (Throwable ignored) {
}
}
RouteAdvertisement dstRoute = doc.getDestRoute();
RouteAdvertisement srcRoute = doc.getSrcRoute();
int queryId = response.getQueryId();
if ((dstRoute == null) || (srcRoute == null)) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processResponse: malformed response - discard.");
}
// Malformed response. Just discard.
return;
}
EndpointAddress routingPeer = router.pid2addr(srcRoute.getDestPeerID());
EndpointAddress destPeer = router.pid2addr(dstRoute.getDestPeerID());
if ((routingPeer == null) || (destPeer == null)) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("processResponse: malformed PeerID in response - discard.");
}
// Malformed response. Just discard.
return;
}
// check if we have a negative route response
if (queryId == NACKROUTE_QUERYID) {
AccessPointAdvertisement badHop = dstRoute.nextHop(router.addr2pid(routingPeer));
PeerID badPeer = null;
if (badHop != null) {
badPeer = badHop.getPeerID();
} else { // the bad hop is the final destination
badPeer = dstRoute.getDestPeerID();
}
processBadRoute(badPeer, dstRoute);
return;
}
// This is not our own peer adv, so we must not keep it
// for more than its expiration time.
// we only need to publish this route if
// we don't know about it yet
// XXX: here is where we could be more conservative and use isNormallyReachable() instead, thus
// excluding
// incoming messengers.
if ((!router.isLocalRoute(router.pid2addr(srcRoute.getDestPeerID())))
&& (!router.isRoutedRoute(router.pid2addr(srcRoute.getDestPeerID())))) {
router.updateRouteAdv(srcRoute);
}
if (destPeer.equals(routingPeer)) {
// The dest peer itself managed to respond to us. That means we
// learned the route from the reverseRoute in the message
// itself. So, there's nothing we need to do.
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("learn route directly from the destination");
}
} else {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("learn route:" + routingPeer);
}
try {
// build the candidate route using the
// route response from the respondant peer
RouteAdvertisement candidateRoute =
RouteAdvertisement.newRoute(
router.addr2pid(destPeer),
router.addr2pid(routingPeer),
(Vector) dstRoute.getVectorHops().clone());
// cleanup the candidate route from any loop and remove the local peer extra
// cycle
RouteAdvertisement.cleanupLoop(candidateRoute, (PeerID) localPeerId);
// Is there anything left in that route (or did the respondant
// believe that we are the last hop on the route - which
// obviously we are not.
if (candidateRoute.size() == 0) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("Route response outdated: NACK responder");
}
generateNACKRoute(
router.addr2pid(routingPeer), router.addr2pid(destPeer), dstRoute.getVectorHops());
return;
}
// get the address of the first hop in the route to verify that
// we have a route (direct or long) to the first hop, so the route
// is valid
EndpointAddress candidateRouter = router.pid2addr(candidateRoute.getFirstHop().getPeerID());
// check that we have a direct connection to the first hop
if (router.ensureLocalRoute(candidateRouter, null) == null) {
// If we do not have a direct route to the candidate router check
// for a long route in that case stich the route
RouteAdvertisement routeToRouter = router.getRoute(candidateRouter, false);
if (routeToRouter == null) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("Route response useless: no route to next router hop");
}
return;
}
// stich the route removing any loops and localPeer cycle
if (RouteAdvertisement.stichRoute(candidateRoute, routeToRouter, (PeerID) localPeerId)) {
router.setRoute(candidateRoute, false);
} else {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("Route response error stiching route response");
}
return;
}
} else {
// we have a direct connection with the first hop of the candidate route
// set the new route, which starts with the peer that replied to us.
router.setRoute(candidateRoute, false);
}
} catch (Exception ex) {
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("Route response exception when building response route" + ex);
LOG.debug(" bad dstRoute: " + dstRoute.display());
}
}
if (LOG.isEnabledFor(Level.DEBUG)) {
LOG.debug("finish process route response successfully");
}
}
}