@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
if (cmd == OnOffType.ON || cmd == OnOffType.OFF) {
byte cmd1 = (byte) ((cmd == OnOffType.ON) ? 0x11 : 0x13);
byte value = (byte) ((cmd == OnOffType.ON) ? 0xFF : 0x00);
int group = s_getGroup(conf);
if (group == -1) {
logger.error("no group=xx specified in item {}", conf.getItemName());
return;
}
logger.info(
"{}: sending {} broadcast to group {}",
nm(),
(cmd1 == 0x11) ? "ON" : "OFF",
s_getGroup(conf));
Msg m = dev.makeStandardMessage((byte) 0x0f, cmd1, value, group);
dev.enqueueMessage(m, m_feature);
}
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
if (cmd instanceof DecimalType) {
int v = ((DecimalType) cmd).intValue();
int cmd1 = (v != 1) ? 0x17 : 0x18; // start or stop
int cmd2 = (v == 2) ? 0x01 : 0; // up or down
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) cmd1, (byte) cmd2, s_getGroup(conf));
dev.enqueueMessage(m, m_feature);
logger.info(
"{}: cmd {} sent manual change {} {} to {}",
nm(),
v,
(cmd1 == 0x17) ? "START" : "STOP",
(cmd2 == 0x01) ? "UP" : "DOWN",
dev.getAddress());
} else {
logger.error("{}: invalid command type: {}", nm(), cmd);
}
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
int dc = transform(((DecimalType) cmd).intValue());
int intFactor = getIntParameter("factor", 1);
//
// determine what level should be, and what field it should be in
//
int ilevel = dc * intFactor;
byte level = (byte) (ilevel > 255 ? 0xFF : ((ilevel < 0) ? 0 : ilevel));
String vfield = getStringParameter("value", "");
if (vfield == "") {
logger.error("{} has no value field specified", nm());
}
//
// figure out what cmd1, cmd2, d1, d2, d3 are supposed to be
// to form a proper message
//
int cmd1 = getIntParameter("cmd1", -1);
if (cmd1 < 0) {
logger.error("{} has no cmd1 specified!", nm());
return;
}
int cmd2 = getIntParameter("cmd2", 0);
int ext = getIntParameter("ext", 0);
Msg m = null;
if (ext == 1 || ext == 2) {
byte[] data =
new byte[] {
(byte) getIntParameter("d1", 0),
(byte) getIntParameter("d2", 0),
(byte) getIntParameter("d3", 0)
};
m = dev.makeExtendedMessage((byte) 0x0f, (byte) cmd1, (byte) cmd2, data);
m.setByte(vfield, level);
if (ext == 1) m.setCRC();
else if (ext == 2) m.setCRC2();
} else {
m = dev.makeStandardMessage((byte) 0x0f, (byte) cmd1, (byte) cmd2);
m.setByte(vfield, level);
}
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent msg to change level to {}", nm(), ((DecimalType) cmd).intValue());
m = null;
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
String cmdParam = conf.getParameter("cmd");
if (cmdParam == null) {
logger.error("{} ignoring cmd {} because no cmd= is configured!", nm(), cmd);
return;
}
try {
if (cmd == OnOffType.ON) {
if (cmdParam.equals("reset")) {
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) 0x80, (byte) 0x00);
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent reset msg to power meter {}", nm(), dev.getAddress());
m_feature.publish(OnOffType.OFF, StateChangeType.ALWAYS, "cmd", "reset");
} else if (cmdParam.equals("update")) {
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) 0x82, (byte) 0x00);
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent update msg to power meter {}", nm(), dev.getAddress());
m_feature.publish(OnOffType.OFF, StateChangeType.ALWAYS, "cmd", "update");
} else {
logger.error(
"{}: ignoring unknown cmd {} for power meter {}", nm(), cmdParam, dev.getAddress());
}
} else if (cmd == OnOffType.OFF) {
logger.info("{}: ignoring off request for power meter {}", nm(), dev.getAddress());
}
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
byte houseCode = dev.getX10HouseCode();
byte houseUnitCode = (byte) (houseCode << 4 | dev.getX10UnitCode());
if (cmd == IncreaseDecreaseType.INCREASE || cmd == IncreaseDecreaseType.DECREASE) {
byte houseCommandCode =
(byte)
(houseCode << 4
| (cmd == IncreaseDecreaseType.INCREASE
? X10.Command.BRIGHT.code()
: X10.Command.DIM.code()));
Msg munit = dev.makeX10Message(houseUnitCode, (byte) 0x00); // send unit code
dev.enqueueMessage(munit, m_feature);
Msg mcmd = dev.makeX10Message(houseCommandCode, (byte) 0x80); // send command code
dev.enqueueMessage(mcmd, m_feature);
String bd = cmd == IncreaseDecreaseType.INCREASE ? "BRIGHTEN" : "DIM";
logger.info("{}: sent msg to switch {} {}", nm(), dev.getAddress(), bd);
}
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
//
// I did not have hardware that would respond to the PRESET_DIM codes.
// This code path needs testing.
//
byte houseCode = dev.getX10HouseCode();
byte houseUnitCode = (byte) (houseCode << 4 | dev.getX10UnitCode());
Msg munit = dev.makeX10Message(houseUnitCode, (byte) 0x00); // send unit code
dev.enqueueMessage(munit, m_feature);
PercentType pc = (PercentType) cmd;
logger.debug("{}: changing level of {} to {}", nm(), dev.getAddress(), pc.intValue());
int level = (pc.intValue() * 32) / 100;
byte cmdCode =
(level >= 16) ? X10.Command.PRESET_DIM_2.code() : X10.Command.PRESET_DIM_1.code();
level = level % 16;
if (level <= 0) level = 0;
houseCode = (byte) s_X10CodeForLevel[level];
cmdCode |= (houseCode << 4);
Msg mcmd = dev.makeX10Message(cmdCode, (byte) 0x80); // send command code
dev.enqueueMessage(mcmd, m_feature);
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
PercentType pc = (PercentType) cmd;
double ramptime = getRampTime(conf, 0);
int level = pc.intValue();
if (level > 0) { // make light on message with given level
level = getMaxLightLevel(conf, level);
byte cmd2 = encode(ramptime, level);
Msg m = dev.makeStandardMessage((byte) 0x0f, getOnCmd(), (byte) cmd2);
dev.enqueueMessage(m, m_feature);
logger.info(
"{}: sent msg to set {} to {} with {} second ramp time.",
nm(),
dev.getAddress(),
level,
ramptime);
} else { // switch off
Msg m = dev.makeStandardMessage((byte) 0x0f, getOffCmd(), (byte) 0x00);
dev.enqueueMessage(m, m_feature);
logger.info(
"{}: sent msg to set {} to zero by switching off with {} ramp time.",
nm(),
dev.getAddress(),
ramptime);
}
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
if (cmd == OnOffType.ON) {
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) 0x11, (byte) 0xff);
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent msg to switch {} on", nm(), dev.getAddress());
} else if (cmd == OnOffType.OFF) {
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) 0x13, (byte) 0x00);
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent msg to switch {} off", nm(), dev.getAddress());
}
// This used to be configurable, but was made static to make
// the architecture of the binding cleaner.
int delay = 2000;
delay = Math.max(1000, delay);
delay = Math.min(10000, delay);
Timer timer = new Timer();
timer.schedule(
new TimerTask() {
@Override
public void run() {
Msg m = m_feature.makePollMsg();
InsteonDevice dev = m_feature.getDevice();
if (m != null) dev.enqueueMessage(m, m_feature);
}
},
delay);
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error: ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
int button = this.getIntParameter("button", -1);
if (cmd == OnOffType.ON) {
Msg m =
dev.makeExtendedMessage(
(byte) 0x1f,
(byte) 0x2e,
(byte) 0x00,
new byte[] {(byte) button, (byte) 0x09, (byte) 0x01});
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent msg to switch {} on", nm(), dev.getAddress());
} else if (cmd == OnOffType.OFF) {
Msg m =
dev.makeExtendedMessage(
(byte) 0x1f,
(byte) 0x2e,
(byte) 0x00,
new byte[] {(byte) button, (byte) 0x09, (byte) 0x00});
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent msg to switch {} off", nm(), dev.getAddress());
}
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
int ext = getIntParameter("ext", 0);
int direc = 0x00;
int level = 0x00;
Msg m = null;
if (cmd == OnOffType.ON) {
level = getMaxLightLevel(conf, 0xff);
direc = 0x11;
logger.info(
"{}: sent msg to switch {} to {}",
nm(),
dev.getAddress(),
level == 0xff ? "on" : level);
} else if (cmd == OnOffType.OFF) {
direc = 0x13;
logger.info("{}: sent msg to switch {} off", nm(), dev.getAddress());
}
if (ext == 1 || ext == 2) {
byte[] data =
new byte[] {
(byte) getIntParameter("d1", 0),
(byte) getIntParameter("d2", 0),
(byte) getIntParameter("d3", 0)
};
m = dev.makeExtendedMessage((byte) 0x0f, (byte) direc, (byte) level, data);
logger.info("{}: was an extended message for device {}", nm(), dev.getAddress());
if (ext == 1) m.setCRC();
else if (ext == 2) m.setCRC2();
} else {
m = dev.makeStandardMessage((byte) 0x0f, (byte) direc, (byte) level, s_getGroup(conf));
}
logger.info("Sending message to {}", dev.getAddress());
dev.enqueueMessage(m, m_feature);
// expect to get a direct ack after this!
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
if (cmd == IncreaseDecreaseType.INCREASE) {
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) 0x15, (byte) 0x00);
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent msg to brighten {}", nm(), dev.getAddress());
} else if (cmd == IncreaseDecreaseType.DECREASE) {
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) 0x16, (byte) 0x00);
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent msg to dimm {}", nm(), dev.getAddress());
}
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
PercentType pc = (PercentType) cmd;
logger.debug("changing level of {} to {}", dev.getAddress(), pc.intValue());
int level = (int) Math.ceil((pc.intValue() * 255.0) / 100); // round up
if (level > 0) { // make light on message with given level
level = getMaxLightLevel(conf, level);
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) 0x11, (byte) level);
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent msg to set {} to {}", nm(), dev.getAddress(), level);
} else { // switch off
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) 0x13, (byte) 0x00);
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent msg to set {} to zero by switching off", nm(), dev.getAddress());
}
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
byte houseCode = dev.getX10HouseCode();
byte houseUnitCode = (byte) (houseCode << 4 | dev.getX10UnitCode());
if (cmd == OnOffType.ON || cmd == OnOffType.OFF) {
byte houseCommandCode =
(byte)
(houseCode << 4
| (cmd == OnOffType.ON ? X10.Command.ON.code() : X10.Command.OFF.code()));
Msg munit = dev.makeX10Message(houseUnitCode, (byte) 0x00); // send unit code
dev.enqueueMessage(munit, m_feature);
Msg mcmd = dev.makeX10Message(houseCommandCode, (byte) 0x80); // send command code
dev.enqueueMessage(mcmd, m_feature);
String onOff = cmd == OnOffType.ON ? "ON" : "OFF";
logger.info("{}: sent msg to switch {} {}", nm(), dev.getAddress(), onOff);
}
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
if (cmd == OnOffType.ON) {
double ramptime = getRampTime(conf, 0);
int ramplevel = getRampLevel(conf, 100);
byte cmd2 = encode(ramptime, ramplevel);
Msg m = dev.makeStandardMessage((byte) 0x0f, getOnCmd(), (byte) cmd2, s_getGroup(conf));
dev.enqueueMessage(m, m_feature);
logger.info(
"{}: sent ramp on to switch {} time {} level {} cmd1 {}",
nm(),
dev.getAddress(),
ramptime,
ramplevel,
getOnCmd());
} else if (cmd == OnOffType.OFF) {
double ramptime = getRampTime(conf, 0);
int ramplevel = getRampLevel(conf, 0 /*ignored*/);
byte cmd2 = encode(ramptime, ramplevel);
Msg m = dev.makeStandardMessage((byte) 0x0f, getOffCmd(), (byte) cmd2, s_getGroup(conf));
dev.enqueueMessage(m, m_feature);
logger.info(
"{}: sent ramp off to switch {} time {} cmd1 {}",
nm(),
dev.getAddress(),
ramptime,
getOffCmd());
}
// expect to get a direct ack after this!
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
@Override
public void handleCommand(InsteonPLMBindingConfig conf, Command cmd, InsteonDevice dev) {
try {
if (cmd == OnOffType.ON) {
int level = getMaxLightLevel(conf, 0xff);
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) 0x12, (byte) level, s_getGroup(conf));
dev.enqueueMessage(m, m_feature);
logger.info(
"{}: sent fast on to switch {} level {}",
nm(),
dev.getAddress(),
level == 0xff ? "on" : level);
} else if (cmd == OnOffType.OFF) {
Msg m = dev.makeStandardMessage((byte) 0x0f, (byte) 0x14, (byte) 0x00, s_getGroup(conf));
dev.enqueueMessage(m, m_feature);
logger.info("{}: sent fast off to switch {}", nm(), dev.getAddress());
}
// expect to get a direct ack after this!
} catch (IOException e) {
logger.error("{}: command send i/o error: ", nm(), e);
} catch (FieldException e) {
logger.error("{}: command send message creation error ", nm(), e);
}
}
/**
* Factory method
*
* @param dt device type after which to model the device
* @return newly created device
*/
public static InsteonDevice s_makeDevice(DeviceType dt) {
InsteonDevice dev = new InsteonDevice();
dev.instantiateFeatures(dt);
return dev;
}
