Esempio n. 1
0
 /**
  * Clones this Step.
  *
  * @return a cloned step
  */
 public Object clone() {
   PositionStep step = (PositionStep) super.clone();
   if (step != null) step.points[0] = step.p = step.new Position(p.getX(), p.getY());
   step.textLayouts = new HashMap<TrackerPanel, TextLayout>();
   step.layoutBounds = new HashMap<TrackerPanel, Rectangle>();
   return step;
 }
Esempio n. 2
0
  protected void setDepthFunc(DrawContext dc, OrderedIcon uIcon, Vec4 screenPoint) {
    GL gl = dc.getGL();

    if (uIcon.icon.isAlwaysOnTop()) {
      gl.glDepthFunc(GL.GL_ALWAYS);
      return;
    }

    Position eyePos = dc.getView().getEyePosition();
    if (eyePos == null) {
      gl.glDepthFunc(GL.GL_ALWAYS);
      return;
    }

    double altitude = eyePos.getElevation();
    if (altitude < (dc.getGlobe().getMaxElevation() * dc.getVerticalExaggeration())) {
      double depth = screenPoint.z - (8d * 0.00048875809d);
      depth = depth < 0d ? 0d : (depth > 1d ? 1d : depth);
      gl.glDepthFunc(GL.GL_LESS);
      gl.glDepthRange(depth, depth);
    } else if (uIcon.eyeDistance > uIcon.horizonDistance) {
      gl.glDepthFunc(GL.GL_EQUAL);
      gl.glDepthRange(1d, 1d);
    } else {
      gl.glDepthFunc(GL.GL_ALWAYS);
    }
  }
  protected void movePolygon(Point previousMousePoint, Point mousePoint) {
    // Intersect a ray through each mouse point, with a geoid passing through the reference
    // elevation.
    // If either ray fails to intersect the geoid, then ignore this event. Use the difference
    // between the two
    // intersected positions to move the control point's location.

    View view = this.wwd.getView();
    Globe globe = this.wwd.getModel().getGlobe();

    Position refPos = this.polygon.getReferencePosition();
    if (refPos == null) return;

    Line ray = view.computeRayFromScreenPoint(mousePoint.getX(), mousePoint.getY());
    Line previousRay =
        view.computeRayFromScreenPoint(previousMousePoint.getX(), previousMousePoint.getY());

    Vec4 vec = AirspaceEditorUtil.intersectGlobeAt(this.wwd, refPos.getElevation(), ray);
    Vec4 previousVec =
        AirspaceEditorUtil.intersectGlobeAt(this.wwd, refPos.getElevation(), previousRay);

    if (vec == null || previousVec == null) {
      return;
    }

    Position pos = globe.computePositionFromPoint(vec);
    Position previousPos = globe.computePositionFromPoint(previousVec);
    LatLon change = pos.subtract(previousPos);

    this.polygon.move(new Position(change.getLatitude(), change.getLongitude(), 0.0));
  }
Esempio n. 4
0
  protected void dragWholeShape(DragSelectEvent dragEvent, Movable dragObject) {
    View view = getWwd().getView();
    EllipsoidalGlobe globe = (EllipsoidalGlobe) getWwd().getModel().getGlobe();

    // Compute ref-point position in screen coordinates.
    Position refPos = dragObject.getReferencePosition();
    if (refPos == null) return;

    Vec4 refPoint = globe.computePointFromPosition(refPos);
    Vec4 screenRefPoint = view.project(refPoint);

    // Compute screen-coord delta since last event.
    int dx = dragEvent.getPickPoint().x - dragEvent.getPreviousPickPoint().x;
    int dy = dragEvent.getPickPoint().y - dragEvent.getPreviousPickPoint().y;

    // Find intersection of screen coord ref-point with globe.
    double x = screenRefPoint.x + dx;
    double y =
        dragEvent.getMouseEvent().getComponent().getSize().height - screenRefPoint.y + dy - 1;
    Line ray = view.computeRayFromScreenPoint(x, y);
    Intersection inters[] = globe.intersect(ray, refPos.getElevation());

    if (inters != null) {
      // Intersection with globe. Move reference point to the intersection point.
      Position p = globe.computePositionFromPoint(inters[0].getIntersectionPoint());
      dragObject.moveTo(p);
    }
  }
    /**
     * Performs one line of sight calculation between the reference position and a specified grid
     * position.
     *
     * @param gridPosition the grid position.
     * @throws InterruptedException if the operation is interrupted.
     */
    protected void performIntersection(Position gridPosition) throws InterruptedException {
      // Intersect the line between this grid point and the selected position.
      Intersection[] intersections = this.terrain.intersect(this.referencePosition, gridPosition);
      if (intersections == null || intersections.length == 0) {
        // No intersection, so the line goes from the center to the grid point.
        this.sightLines.add(new Position[] {this.referencePosition, gridPosition});
        return;
      }

      // Only the first intersection is shown.
      Vec4 iPoint = intersections[0].getIntersectionPoint();
      Vec4 gPoint =
          terrain.getSurfacePoint(
              gridPosition.getLatitude(), gridPosition.getLongitude(), gridPosition.getAltitude());

      // Check to see whether the intersection is beyond the grid point.
      if (iPoint.distanceTo3(this.referencePoint) >= gPoint.distanceTo3(this.referencePoint)) {
        // Intersection is beyond the grid point; the line goes from the center to the grid point.
        this.addSightLine(this.referencePosition, gridPosition);
        return;
      }

      // Compute the position corresponding to the intersection.
      Position iPosition = this.terrain.getGlobe().computePositionFromPoint(iPoint);

      // The sight line goes from the user-selected position to the intersection position.
      this.addSightLine(this.referencePosition, new Position(iPosition, 0));

      // Keep track of the intersection positions.
      this.addIntersectionPosition(iPosition);

      this.updateProgress();
    }
Esempio n. 6
0
  protected int determineAdjustmentSide(Movable dragObject, double factor) {
    if (dragObject instanceof SurfaceSector) {
      SurfaceSector quad = (SurfaceSector) dragObject;
      Sector s = quad.getSector(); // TODO: go over all sectors
      Position p = this.getWwd().getCurrentPosition();

      if (p == null) {
        return NONE;
      }

      double dN = abs(s.getMaxLatitude().subtract(p.getLatitude()).degrees);
      double dS = abs(s.getMinLatitude().subtract(p.getLatitude()).degrees);
      double dW = abs(s.getMinLongitude().subtract(p.getLongitude()).degrees);
      double dE = abs(s.getMaxLongitude().subtract(p.getLongitude()).degrees);

      double sLat = factor * s.getDeltaLatDegrees();
      double sLon = factor * s.getDeltaLonDegrees();

      if (dN < sLat && dW < sLon) return NORTHWEST;
      if (dN < sLat && dE < sLon) return NORTHEAST;
      if (dS < sLat && dW < sLon) return SOUTHWEST;
      if (dS < sLat && dE < sLon) return SOUTHEAST;
      if (dN < sLat) return NORTH;
      if (dS < sLat) return SOUTH;
      if (dW < sLon) return WEST;
      if (dE < sLon) return EAST;
    }

    return NONE;
  }
 FollowPath(String name) {
   super(name);
   path.add(Position.fromDegrees(0, 0, 1e5));
   path.add(Position.fromDegrees(1, 3, 1e5));
   path.add(Position.fromDegrees(2, 4, 1e5));
   path.add(Position.fromDegrees(3, 5, 1e5));
 }
  protected void assembleVertexControlPoints(DrawContext dc) {
    Terrain terrain = dc.getTerrain();
    ExtrudedPolygon polygon = this.getPolygon();

    Position refPos = polygon.getReferencePosition();
    Vec4 refPoint = terrain.getSurfacePoint(refPos.getLatitude(), refPos.getLongitude(), 0);

    int altitudeMode = polygon.getAltitudeMode();
    double height = polygon.getHeight();

    Vec4 vaa = null;
    double vaaLength = 0; // used to compute independent length of each cap vertex
    double vaLength = 0;

    int i = 0;
    for (LatLon location : polygon.getOuterBoundary()) {
      Vec4 vert;

      // Compute the top/cap point.
      if (altitudeMode == WorldWind.CONSTANT || !(location instanceof Position)) {
        if (vaa == null) {
          // Compute the vector lengths of the top and bottom points at the reference position.
          vaa = refPoint.multiply3(height / refPoint.getLength3());
          vaaLength = vaa.getLength3();
          vaLength = refPoint.getLength3();
        }

        // Compute the bottom point, which is on the terrain.
        vert = terrain.getSurfacePoint(location.getLatitude(), location.getLongitude(), 0);

        double delta = vaLength - vert.dot3(refPoint) / vaLength;
        vert = vert.add3(vaa.multiply3(1d + delta / vaaLength));
      } else if (altitudeMode == WorldWind.RELATIVE_TO_GROUND) {
        vert =
            terrain.getSurfacePoint(
                location.getLatitude(),
                location.getLongitude(),
                ((Position) location).getAltitude());
      } else // WorldWind.ABSOLUTE
      {
        vert =
            terrain
                .getGlobe()
                .computePointFromPosition(
                    location.getLatitude(),
                    location.getLongitude(),
                    ((Position) location).getAltitude() * terrain.getVerticalExaggeration());
      }

      Position vertexPosition = this.wwd.getModel().getGlobe().computePositionFromPoint(vert);

      this.controlPoints.add(
          new ControlPointMarker(
              MOVE_VERTEX_ACTION, vertexPosition, vert, this.vertexControlAttributes, i));
      i++;
    }
  }
Esempio n. 9
0
    private void populate() {
      // set up for a new population
      Vector oldPop = this.positions;
      this.positions = new Vector(50, 50);

      // first browse the old population and make changes
      for (int i = 0; i < oldPop.size(); i++) {
        Position a = (Position) oldPop.get(i);
        if (a.symPosNo < this.symPos.length) {
          Point3d sPos = this.symPos[a.symPosNo];
          if (sPos != null) {
            Point3d newPos = new Point3d(sPos);
            newPos.add(a.expandTranslation);
            if (this.isPosInBounds(newPos)
                && Model3d.this.getAtomHere(this.positions, newPos) == null) {
              a.changePos(newPos);
              this.positions.add(a);
              // System.out.println("move "+a);
              continue;
            }
          }
        }
        // invalid, duplicate or out of bounds, remove
        // System.out.println("del "+a);
        a.del();
      }

      // now add potentially new appeared atoms
      for (double i = -Math.ceil(Model3d.this.exm - 1);
          i <= Math.floor(Model3d.this.exp + 1) + 1;
          i++)
        for (double j = -Math.ceil(Model3d.this.eym - 1);
            j <= Math.floor(Model3d.this.eyp + 1) + 1;
            j++)
          for (double k = -Math.ceil(Model3d.this.ezm - 1);
              k <= Math.floor(Model3d.this.ezp + 1) + 1;
              k++) {
            Vector3d v = new Vector3d(i, j, k);
            for (int l = 0; l < this.symPos.length; l++) {
              if (this.symPos[l] == null) continue;
              Point3d p = new Point3d(this.symPos[l]);
              p.add(v);
              // TODO
              if (this.isPosInBounds(p) && Model3d.this.getAtomHere(this.positions, p) == null) {
                // if (isPosInBounds(round(p)) &&
                // getAtomHere(positions, p)==null) {
                Position a =
                    new Position(this.root, this, p, v, this.radius, this.color, l, !this.hidden);
                this.positions.add(a);
                // if (!isPosInBounds(p))System.out.println("xx
                // "+p);
              }
            }
          }
    }
 public void onSuccess(Position[] positions) {
   for (Position p : positions) {
     Logging.logger()
         .info(
             p.getLatitude().degrees
                 + ","
                 + p.getLongitude().degrees
                 + " --> "
                 + p.getElevation());
   }
 }
    private void fillPointsPanel() {
      int i = 0;
      for (Position pos : lineBuilder.getLine().getPositions()) {
        if (i == this.pointLabels.length) break;

        String las = String.format("Lat %7.4f\u00B0", pos.getLatitude().getDegrees());
        String los = String.format("Lon %7.4f\u00B0", pos.getLongitude().getDegrees());
        pointLabels[i++].setText(las + "  " + los);
      }
      for (; i < this.pointLabels.length; i++) pointLabels[i++].setText("");
    }
  protected void doMoveAirspaceLaterally(
      WorldWindow wwd, Airspace airspace, Point mousePoint, Point previousMousePoint) {
    // Intersect a ray throuh each mouse point, with a geoid passing through the reference
    // elevation. Since
    // most airspace control points follow a fixed altitude, this will track close to the intended
    // mouse position.
    // If either ray fails to intersect the geoid, then ignore this event. Use the difference
    // between the two
    // intersected positions to move the control point's location.

    if (!(airspace instanceof Movable)) {
      return;
    }

    Movable movable = (Movable) airspace;
    View view = wwd.getView();
    Globe globe = wwd.getModel().getGlobe();

    Position refPos = movable.getReferencePosition();
    if (refPos == null) return;

    // Convert the reference position into a cartesian point. This assumes that the reference
    // elevation is defined
    // by the airspace's lower altitude.
    Vec4 refPoint = null;
    if (airspace.isTerrainConforming()[LOWER_ALTITUDE])
      refPoint = wwd.getSceneController().getTerrain().getSurfacePoint(refPos);
    if (refPoint == null) refPoint = globe.computePointFromPosition(refPos);

    // Convert back to a position.
    refPos = globe.computePositionFromPoint(refPoint);

    Line ray = view.computeRayFromScreenPoint(mousePoint.getX(), mousePoint.getY());
    Line previousRay =
        view.computeRayFromScreenPoint(previousMousePoint.getX(), previousMousePoint.getY());

    Vec4 vec = AirspaceEditorUtil.intersectGlobeAt(wwd, refPos.getElevation(), ray);
    Vec4 previousVec = AirspaceEditorUtil.intersectGlobeAt(wwd, refPos.getElevation(), previousRay);

    if (vec == null || previousVec == null) {
      return;
    }

    Position pos = globe.computePositionFromPoint(vec);
    Position previousPos = globe.computePositionFromPoint(previousVec);
    LatLon change = pos.subtract(previousPos);

    movable.move(new Position(change.getLatitude(), change.getLongitude(), 0.0));

    this.fireAirspaceMoved(new AirspaceEditEvent(wwd, airspace, this));
  }
  private boolean atMaxLevel(DrawContext dc) {
    Position vpc = dc.getViewportCenterPosition();
    if (dc.getView() == null || this.getLevels() == null || vpc == null) return false;

    if (!this.getLevels().getSector().contains(vpc.getLatitude(), vpc.getLongitude())) return true;

    Level nextToLast = this.getLevels().getNextToLastLevel();
    if (nextToLast == null) return true;

    Sector centerSector =
        nextToLast.computeSectorForPosition(
            vpc.getLatitude(), vpc.getLongitude(), this.getLevels().getTileOrigin());
    return this.needToSplit(dc, centerSector);
  }
Esempio n. 14
0
  /**
   * Compute the lat/lon position of the view center
   *
   * @param dc the current DrawContext
   * @param view the current View
   * @return the ground position of the view center or null
   */
  protected Position computeGroundPosition(DrawContext dc, View view) {
    if (view == null) return null;

    Position groundPos =
        view.computePositionFromScreenPoint(
            view.getViewport().getWidth() / 2, view.getViewport().getHeight() / 2);
    if (groundPos == null) return null;

    double elevation =
        dc.getGlobe().getElevation(groundPos.getLatitude(), groundPos.getLongitude());
    return new Position(
        groundPos.getLatitude(),
        groundPos.getLongitude(),
        elevation * dc.getVerticalExaggeration());
  }
  private Vec4 computeReferencePoint(DrawContext dc) {
    if (dc.getViewportCenterPosition() != null)
      return dc.getGlobe().computePointFromPosition(dc.getViewportCenterPosition());

    java.awt.geom.Rectangle2D viewport = dc.getView().getViewport();
    int x = (int) viewport.getWidth() / 2;
    for (int y = (int) (0.5 * viewport.getHeight()); y >= 0; y--) {
      Position pos = dc.getView().computePositionFromScreenPoint(x, y);
      if (pos == null) continue;

      return dc.getGlobe().computePointFromPosition(pos.getLatitude(), pos.getLongitude(), 0d);
    }

    return null;
  }
Esempio n. 16
0
 /**
  * Constructs a PositionStep with specified image coordinates.
  *
  * @param track the PointMass track
  * @param n the frame number
  * @param x the x coordinate
  * @param y the y coordinate
  */
 public PositionStep(PointMass track, int n, double x, double y) {
   super(track, n);
   p = new Position(x, y);
   p.setTrackEditTrigger(true);
   points = new TPoint[] {p};
   screenPoints = new Point[getLength()];
 }
 public void computeZone(DrawContext dc) {
   try {
     Position centerPos = ((OrbitView) dc.getView()).getCenterPosition();
     if (centerPos != null) {
       if (centerPos.latitude.degrees <= UTM_MAX_LATITUDE
           && centerPos.latitude.degrees >= UTM_MIN_LATITUDE) {
         UTMCoord UTM =
             UTMCoord.fromLatLon(
                 centerPos.getLatitude(), centerPos.getLongitude(), dc.getGlobe());
         this.zone = UTM.getZone();
       } else this.zone = 0;
     }
   } catch (Exception ex) {
     this.zone = 0;
   }
 }
Esempio n. 18
0
  protected Sector resizeShape(Movable dragObject, int side) {
    if (dragObject instanceof SurfaceSector) {
      SurfaceSector quad = (SurfaceSector) dragObject;
      Sector s = quad.getSector(); // TODO: go over all sectors
      Position p = this.getWwd().getCurrentPosition();

      if (p == null || this.getPreviousPosition() == null) {
        return null;
      }

      Angle dLat = p.getLatitude().subtract(this.getPreviousPosition().getLatitude());
      Angle dLon = p.getLongitude().subtract(this.getPreviousPosition().getLongitude());

      Angle newMinLat = s.getMinLatitude();
      Angle newMinLon = s.getMinLongitude();
      Angle newMaxLat = s.getMaxLatitude();
      Angle newMaxLon = s.getMaxLongitude();

      if (side == NORTH) {
        newMaxLat = s.getMaxLatitude().add(dLat);
      } else if (side == SOUTH) {
        newMinLat = s.getMinLatitude().add(dLat);
      } else if (side == EAST) {
        newMaxLon = s.getMaxLongitude().add(dLon);
      } else if (side == WEST) {
        newMinLon = s.getMinLongitude().add(dLon);
      } else if (side == NORTHWEST) {
        newMaxLat = s.getMaxLatitude().add(dLat);
        newMinLon = s.getMinLongitude().add(dLon);
      } else if (side == NORTHEAST) {
        newMaxLat = s.getMaxLatitude().add(dLat);
        newMaxLon = s.getMaxLongitude().add(dLon);
      } else if (side == SOUTHWEST) {
        newMinLat = s.getMinLatitude().add(dLat);
        newMinLon = s.getMinLongitude().add(dLon);
      } else if (side == SOUTHEAST) {
        newMinLat = s.getMinLatitude().add(dLat);
        newMaxLon = s.getMaxLongitude().add(dLon);
      }

      return new Sector(newMinLat, newMaxLat, newMinLon, newMaxLon);
    }

    return null;
  }
    protected void showIntersections(List<Position> intersections) {
      this.intersectionsLayer.removeAllRenderables();

      // Display the intersections as CYAN points.
      PointPlacemarkAttributes intersectionPointAttributes;
      intersectionPointAttributes = new PointPlacemarkAttributes();
      intersectionPointAttributes.setLineMaterial(Material.CYAN);
      intersectionPointAttributes.setScale(6d);
      intersectionPointAttributes.setUsePointAsDefaultImage(true);

      for (Position p : intersections) {
        PointPlacemark pm = new PointPlacemark(p);
        pm.setAltitudeMode(WorldWind.CLAMP_TO_GROUND);
        pm.setAttributes(intersectionPointAttributes);
        pm.setValue(AVKey.DISPLAY_NAME, p.toString());
        this.intersectionsLayer.addRenderable(pm);
      }
    }
 static {
   path = new ArrayList<Position>();
   path.add(Position.fromDegrees(0, 0, 1e5));
   path.add(Position.fromDegrees(0, 10, 1e5));
   path.add(Position.fromDegrees(0, 20, 1e5));
   path.add(Position.fromDegrees(0, 30, 1e5));
   path.add(Position.fromDegrees(0, 40, 1e5));
   path.add(Position.fromDegrees(0, 50, 1e5));
   path.add(Position.fromDegrees(0, 60, 1e5));
   path.add(Position.fromDegrees(0, 70, 1e5));
 }
Esempio n. 21
0
 /**
  * Compute the view range footprint on the globe.
  *
  * @param dc the current <code>DrawContext</code>
  * @param steps the number of steps.
  * @return an array list of <code>LatLon</code> forming a closed shape.
  */
 protected ArrayList<LatLon> computeViewFootPrint(DrawContext dc, int steps) {
   ArrayList<LatLon> positions = new ArrayList<LatLon>();
   Position eyePos = dc.getView().getEyePosition();
   Angle distance =
       Angle.fromRadians(
           Math.asin(
               dc.getView().getFarClipDistance()
                   / (dc.getGlobe().getRadius() + eyePos.getElevation())));
   if (distance.degrees > 10) {
     double headStep = 360d / steps;
     Angle heading = Angle.ZERO;
     for (int i = 0; i <= steps; i++) {
       LatLon p = LatLon.greatCircleEndPosition(eyePos, heading, distance);
       positions.add(p);
       heading = heading.addDegrees(headStep);
     }
     return positions;
   } else return null;
 }
    protected void performIntersectionTests(final Position curPos) throws InterruptedException {
      // Clear the results lists when the user selects a new location.
      this.firstIntersectionPositions.clear();
      this.sightLines.clear();

      // Raise the selected location and the grid points a little above ground just to show we can.
      final double height = 5; // meters

      // Form the grid.
      double gridRadius = GRID_RADIUS.degrees;
      Sector sector =
          Sector.fromDegrees(
              curPos.getLatitude().degrees - gridRadius, curPos.getLatitude().degrees + gridRadius,
              curPos.getLongitude().degrees - gridRadius,
                  curPos.getLongitude().degrees + gridRadius);

      this.grid = buildGrid(sector, height, GRID_DIMENSION, GRID_DIMENSION);
      this.numGridPoints = grid.size();

      // Compute the position of the selected location (incorporate its height).
      this.referencePosition = new Position(curPos.getLatitude(), curPos.getLongitude(), height);
      this.referencePoint =
          terrain.getSurfacePoint(curPos.getLatitude(), curPos.getLongitude(), height);

      //            // Pre-caching is unnecessary and is useful only when it occurs before the
      // intersection
      //            // calculations. It will incur extra overhead otherwise. The normal intersection
      // calculations
      //            // cause the same caching, making subsequent calculations on the same area
      // faster.
      //            this.preCache(grid, this.referencePosition);

      // On the EDT, show the grid.
      SwingUtilities.invokeLater(
          new Runnable() {
            public void run() {
              progressBar.setValue(0);
              progressBar.setString(null);
              clearLayers();
              showGrid(grid, referencePosition);
              getWwd().redraw();
            }
          });

      // Perform the intersection calculations.
      this.startTime = System.currentTimeMillis();
      for (Position gridPos : this.grid) // for each grid point.
      {
        //noinspection ConstantConditions
        if (NUM_THREADS > 0) this.threadPool.execute(new Intersector(gridPos));
        else performIntersection(gridPos);
      }
    }
Esempio n. 23
0
  protected String formatMeasurements(Position pos) {
    StringBuilder sb = new StringBuilder();

    /*
     //sb.append(this.unitsFormat.areaNL(this.getLabel(AREA_LABEL), this.getArea()));
     sb.append(this.unitsFormat.lengthNL(this.getLabel(PERIMETER_LABEL), this.getLength()));
    */

    // sb.append(this.unitsFormat.lengthNL(this.getLabel(WIDTH_LABEL),
    // this.shape.getEastWestRadius() * 2));
    // sb.append(this.unitsFormat.lengthNL(this.getLabel(LENGTH_LABEL),
    // this.shape.getNorthSouthRadius() * 2));
    // sb.append(this.unitsFormat.lengthNL(this.getLabel(HEIGHT_LABEL),
    // this.shape.getVerticalRadius() * 2));

    // sb.append(this.unitsFormat.angleNL(this.getLabel(HEADING_LABEL), this.shape.getHeading()));

    // if "activeControlPoint" is in fact one of the control points
    if (!this.arePositionsRedundant(pos, this.polygon.getReferencePosition())) {
      sb.append(this.unitsFormat.angleNL(this.getLabel(LATITUDE_LABEL), pos.getLatitude()));
      sb.append(this.unitsFormat.angleNL(this.getLabel(LONGITUDE_LABEL), pos.getLongitude()));
      sb.append(this.unitsFormat.lengthNL(this.getLabel(ALTITUDE_LABEL), pos.getAltitude()));
    }

    // if "activeControlPoint" is the shape itself
    if (this.polygon.getReferencePosition() != null) {
      sb.append(
          this.unitsFormat.angleNL(
              this.getLabel(CENTER_LATITUDE_LABEL),
              this.polygon.getReferencePosition().getLatitude()));
      sb.append(
          this.unitsFormat.angleNL(
              this.getLabel(CENTER_LONGITUDE_LABEL),
              this.polygon.getReferencePosition().getLongitude()));
      sb.append(
          this.unitsFormat.lengthNL(
              this.getLabel(CENTER_ALTITUDE_LABEL),
              this.polygon.getReferencePosition().getAltitude()));
    }

    return sb.toString();
  }
    protected void showGrid(List<Position> grid, Position cPos) {
      this.gridLayer.removeAllRenderables();

      // Display the grid points in yellow.
      PointPlacemarkAttributes gridPointAttributes;
      gridPointAttributes = new PointPlacemarkAttributes();
      gridPointAttributes.setLineMaterial(Material.YELLOW);
      gridPointAttributes.setScale(6d);
      gridPointAttributes.setUsePointAsDefaultImage(true);

      for (Position p : grid) {
        PointPlacemark pm = new PointPlacemark(p);
        pm.setAltitudeMode(WorldWind.RELATIVE_TO_GROUND);
        pm.setAttributes(gridPointAttributes);
        pm.setLineEnabled(true);
        pm.setValue(AVKey.DISPLAY_NAME, p.toString());
        this.gridLayer.addRenderable(pm);
      }

      showCenterPoint(cPos);
    }
 // Remove the old text if the action is a MOVE.
 // However, we do not allow dropping on top of the selected text, so in that case do nothing.
 protected void exportDone(JComponent c, Transferable data, int action) {
   if (c != textComponent) { // ###
     System.out.println("*** exportDone(): c=" + c);
   }
   System.out.println(
       ">>> exportDone(): action="
           + action
           + ", MOVE="
           + MOVE
           + ", shouldRemove="
           + shouldRemove);
   if (shouldRemove && (action == MOVE)) {
     if ((p0 != null) && (p1 != null) && (p0.getOffset() != p1.getOffset())) {
       try {
         textComponent.getDocument().remove(p0.getOffset(), p1.getOffset() - p0.getOffset());
       } catch (BadLocationException e) {
         System.out.println("*** exportDone(): Can't remove text from source.");
       }
     }
   }
   source = null;
 }
    protected void showGridSightLines(List<Position> grid, Position cPos) {
      this.sightLinesLayer.removeAllRenderables();

      // Display lines from the center to each grid point.
      ShapeAttributes lineAttributes;
      lineAttributes = new BasicShapeAttributes();
      lineAttributes.setDrawOutline(true);
      lineAttributes.setDrawInterior(false);
      lineAttributes.setOutlineMaterial(Material.GREEN);
      lineAttributes.setOutlineOpacity(0.6);

      for (Position p : grid) {
        List<Position> endPoints = new ArrayList<Position>();
        endPoints.add(cPos);
        endPoints.add(new Position(p.getLatitude(), p.getLongitude(), 0));

        Path path = new Path(endPoints);
        path.setAltitudeMode(WorldWind.RELATIVE_TO_GROUND);
        path.setAttributes(lineAttributes);
        this.sightLinesLayer.addRenderable(path);
      }
    }
    protected void showCenterPoint(Position cPos) {
      // Display the center point in red.
      PointPlacemarkAttributes selectedLocationAttributes;
      selectedLocationAttributes = new PointPlacemarkAttributes();
      selectedLocationAttributes.setLineMaterial(Material.RED);
      selectedLocationAttributes.setScale(8d);
      selectedLocationAttributes.setUsePointAsDefaultImage(true);

      PointPlacemark pm = new PointPlacemark(cPos);
      pm.setAltitudeMode(WorldWind.RELATIVE_TO_GROUND);
      pm.setAttributes(selectedLocationAttributes);
      pm.setValue(AVKey.DISPLAY_NAME, cPos.toString());
      pm.setLineEnabled(true);
      this.gridLayer.addRenderable(pm);
    }
Esempio n. 28
0
    private Info[] buildFreeShapes() {
      double elevation = 10e3;
      ArrayList<Position> positions = new ArrayList<Position>();
      positions.add(
          new Position(Angle.fromDegrees(37.8484), Angle.fromDegrees(-119.9754), elevation));
      positions.add(
          new Position(Angle.fromDegrees(39.3540), Angle.fromDegrees(-110.1526), elevation));
      positions.add(
          new Position(Angle.fromDegrees(38.3540), Angle.fromDegrees(-100.1526), elevation));

      ArrayList<Position> positions2 = new ArrayList<Position>();
      positions2.add(new Position(Angle.fromDegrees(0), Angle.fromDegrees(-150), elevation));
      positions2.add(new Position(Angle.fromDegrees(25), Angle.fromDegrees(-75), elevation));
      positions2.add(new Position(Angle.fromDegrees(50), Angle.fromDegrees(0), elevation));

      ArrayList<Position> positions3 = new ArrayList<Position>();
      for (double lat = 42, lon = -100; lat <= 45; lat += .1, lon += .1) {
        positions3.add(new Position(Angle.fromDegrees(lat), Angle.fromDegrees(lon), elevation));
      }

      ArrayList<Position> positions4 = new ArrayList<Position>();
      positions4.add(new Position(Angle.fromDegrees(90), Angle.fromDegrees(-110), elevation));
      positions4.add(new Position(Angle.fromDegrees(-90), Angle.fromDegrees(-110), elevation));

      ArrayList<Position> positions5 = new ArrayList<Position>();
      for (int i = 0; i < 100; i++) {
        positions5.add(
            Position.fromDegrees(38.0 + i * 0.0001, 30.0 + i * 0.0001, 1000.0 + i * 5.0));
      }

      @SuppressWarnings({"UnnecessaryLocalVariable"})
      Info[] infos =
          new Info[] {
            new Info("Short Path", new Polyline(positions)),
            new Info("Long Path", new Polyline(positions2)),
            new Info("Incremental Path", new Polyline(positions3)),
            new Info("Vertical Path", new Polyline(positions4)),
            new Info("Small-segment Path", new Polyline(positions5)),
            new Info("Quad", new Quadrilateral(Sector.fromDegrees(38, 40, -104, -105), elevation)),
            new Info("None", null)
          };

      return infos;
    }
Esempio n. 29
0
  protected void setPolygonHeight(Point previousMousePoint, Point mousePoint) {
    // Find the closest points between the rays through each screen point, and the ray from the
    // control point
    // and in the direction of the globe's surface normal. Compute the elevation difference between
    // these two
    // points, and use that as the change in polygon height.

    Position referencePos = this.polygon.getReferencePosition();
    if (referencePos == null) return;

    Vec4 referencePoint = this.wwd.getModel().getGlobe().computePointFromPosition(referencePos);

    Vec4 surfaceNormal =
        this.wwd
            .getModel()
            .getGlobe()
            .computeSurfaceNormalAtLocation(
                referencePos.getLatitude(), referencePos.getLongitude());
    Line verticalRay = new Line(referencePoint, surfaceNormal);
    Line screenRay =
        this.wwd.getView().computeRayFromScreenPoint(mousePoint.getX(), mousePoint.getY());
    Line previousScreenRay =
        this.wwd
            .getView()
            .computeRayFromScreenPoint(previousMousePoint.getX(), previousMousePoint.getY());

    Vec4 pointOnLine = AirspaceEditorUtil.nearestPointOnLine(verticalRay, screenRay);
    Vec4 previousPointOnLine =
        AirspaceEditorUtil.nearestPointOnLine(verticalRay, previousScreenRay);

    Position pos = this.wwd.getModel().getGlobe().computePositionFromPoint(pointOnLine);
    Position previousPos =
        this.wwd.getModel().getGlobe().computePositionFromPoint(previousPointOnLine);
    double elevationChange = pos.getElevation() - previousPos.getElevation();

    java.util.List<Position> boundary = new ArrayList<Position>();
    for (LatLon ll : this.polygon.getOuterBoundary()) {
      boundary.add(new Position(ll, ((Position) ll).getElevation() + elevationChange));
    }

    this.polygon.setOuterBoundary(boundary);
  }
Esempio n. 30
0
  protected Vec4 computeAnnotationPosition(Position pos) {
    Vec4 surfacePoint =
        this.wwd
            .getSceneController()
            .getTerrain()
            .getSurfacePoint(pos.getLatitude(), pos.getLongitude());
    if (surfacePoint == null) {
      Globe globe = this.wwd.getModel().getGlobe();
      surfacePoint =
          globe.computePointFromPosition(
              pos.getLatitude(),
              pos.getLongitude(),
              globe.getElevation(pos.getLatitude(), pos.getLongitude()));
    }

    return this.wwd.getView().project(surfacePoint);
  }